mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 9

Question 80

At an enterprise replacing legacy IP handsets, a Junos specialist investigates this scenario: A technician plugs a phone into the wrong switch port and cannot identify its actual neighbor from cabling records. The team must check phone support and PoE capacity before cutover. What is the most likely design-related cause?

  1. PoE availability depends on available switch power budget and each attached device's negotiated consumption.
  2. Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment.
  3. LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones.
  4. Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices.

Explanation

Correct Answer

D:

For an enterprise replacing legacy IP handsets, the governing mechanism is: Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. It explains the reported symptom: A technician plugs a phone into the wrong switch port and cannot identify its actual neighbor from cabling records. The intended response is: Enable supported LLDP on authorized interfaces and inspect neighbor information. Verification: show lldp neighbors identifies the intended adjacent device and receiving port.

Incorrect Answers

A:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. This alternative mechanism does not match the current fault.

B:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. Fixing that different mechanism would not address the current root cause: Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices.

C:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. Its verification is distinct from the reported condition: A technician plugs a phone into the wrong switch port and cannot identify its actual neighbor from cabling records. The team must check phone support and PoE capacity before cutover.

Question 81

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A multicast router drops a received stream even though its physical receiving interface is up. The group traffic must reach interested receivers without flooding other locations. When would the described mechanism be appropriate?

  1. Use RPF to prevent loops and select valid upstream multicast paths.
  2. Use IGMPv3 INCLUDE source lists for IPv4 source-specific multicast receiver membership.
  3. Use IGMP snooping to constrain Layer 2 multicast distribution to interested ports.
  4. Use PIM Register messages to introduce ASM sources to a rendezvous point.

Explanation

Correct Answer

A:

For a campus distributing IP video to several buildings, this mechanism fits the requirement: Use RPF to prevent loops and select valid upstream multicast paths. The design is appropriate because: Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. In this scenario, the observed issue is: A multicast router drops a received stream even though its physical receiving interface is up. The corresponding implementation is: Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface.

Incorrect Answers

B:

IGMPv3 membership records can identify source filters that enable explicit SSM interest. The appropriate correction for the reported case is: Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface.

C:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Fixing that different mechanism would not address the current root cause: multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP.

D:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. Its verification is distinct from the reported condition: A multicast router drops a received stream even though its physical receiving interface is up. The group traffic must reach interested receivers without flooding other locations. When would the described mechanism be appropriate.

Question 82

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Two application hosts should communicate with each other but remain isolated from other tenant communities on the same primary VLAN. The change must retain both link resilience and correct VLAN isolation. Which limitation should guide the change control?

  1. Validate filter match order and feature support to avoid broad unintended reassignment.
  2. Document shared gateway reachability and do not assume the policy inspects routed IP traffic.
  3. Preserve redundant root placement and test topology changes outside production peaks.
  4. Verify device-model support and avoid confusing private VLANs with firewall isolation between routed VLANs.

Explanation

Correct Answer

B:

For a large enterprise updating redundant switch links, the relevant safeguard is: Document shared gateway reachability and do not assume the policy inspects routed IP traffic. It matters while implementing: Create the intended community membership and permitted promiscuous gateway association. The fault involves: Private VLAN community ports support intra-community traffic while preventing communication with other communities. The required acceptance result remains: Hosts in the same community communicate and cross-community test frames are blocked.

Incorrect Answers

A:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. The appropriate correction for the reported case is: Document shared gateway reachability and do not assume the policy inspects routed IP traffic.

C:

Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance. Fixing that different mechanism would not address the current root cause: private VLAN community ports support intra-community traffic while preventing communication with other communities.

D:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. Its verification is distinct from the reported condition: Two application hosts should communicate with each other but remain isolated from other tenant communities on the same primary VLAN. The change must retain both link resilience and correct VLAN isolation.

Question 83

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A BGP neighbor uses an AS number above the two-byte range but older configuration assumes a 16-bit value. The chosen route must have a valid data-plane next hop. Which operational change most directly resolves the observed failure?

  1. Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.
  2. Review peer type and the complete path decision chain before adjusting selection policy.
  3. Configure the correct complete AS value on both peers using supported BGP capability negotiation.
  4. Place specific prefix rejection before a broader permitted match in the relevant policy.

Explanation

Correct Answer

C:

For an enterprise core exchanging BGP routes over redundant WAN paths, the direct corrective action is: Configure the correct complete AS value on both peers using supported BGP capability negotiation. This addresses the mechanism: BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. Confirm by checking: The BGP OPEN handshake succeeds with the full expected ASN. During rollout, check interoperability and avoid substituting truncated ASN values for real peer identity.

Incorrect Answers

A:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. The appropriate correction for the reported case is: Configure the correct complete AS value on both peers using supported BGP capability negotiation.

B:

Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. Fixing that different mechanism would not address the current root cause: BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing.

D:

Junos policy terms are evaluated in configured order and a terminating action can end processing early. Its verification is distinct from the reported condition: A BGP neighbor uses an AS number above the two-byte range but older configuration assumes a 16-bit value. The chosen route must have a valid data-plane next hop.

Question 84

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: A low-latency voice service waits behind large file transfers even when its traffic is correctly classified. The improvement must not starve business traffic. When would the described mechanism be appropriate?

  1. Use 802.1p classification on trusted VLAN-tagged Ethernet traffic.
  2. Use per-queue statistics to diagnose CoS congestion rather than relying on aggregate utilization.
  3. Use BA DSCP classification when trustworthy upstream packet markings exist.
  4. Use strict-priority scheduling for carefully bounded low-latency traffic.

Explanation

Correct Answer

D:

For a campus switch team configuring Junos egress queues, this mechanism fits the requirement: Use strict-priority scheduling for carefully bounded low-latency traffic. The design is appropriate because: A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. In this scenario, the observed issue is: A low-latency voice service waits behind large file transfers even when its traffic is correctly classified. The corresponding implementation is: Configure an appropriate constrained high-priority scheduler for the approved real-time class.

Incorrect Answers

A:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. The appropriate correction for the reported case is: Configure an appropriate constrained high-priority scheduler for the approved real-time class.

B:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. Fixing that different mechanism would not address the current root cause: a scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested.

C:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Its verification is distinct from the reported condition: A low-latency voice service waits behind large file transfers even when its traffic is correctly classified. The improvement must not starve business traffic. When would the described mechanism be appropriate.

Question 85

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: Separate PIM-SM rendezvous points cannot discover active multicast sources registered at neighboring RPs. The corrected tree must respect source and group authorization. What verification result should the engineer expect?

  1. show msdp source-active shows a known source and receivers on the other RP reach it.
  2. show multicast route or PIM state contains the planned source-group combination.
  3. The unneeded branch ages out or prunes while other receiver branches remain active.
  4. Only joined receiver ports receive the test multicast frames during stable operation.

Explanation

Correct Answer

A:

For a multimedia training network running Junos multicast routers, the decisive evidence is: show msdp source-active shows a known source and receivers on the other RP reach it. This validates the action: Configure the required MSDP relationships between the intended ASM rendezvous points. Because: Multicast Source Discovery Protocol communicates source-active information between supported RPs. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

(S,G) multicast state identifies one particular source S and destination group G. The appropriate correction for the reported case is: Configure the required MSDP relationships between the intended ASM rendezvous points.

C:

PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes. Fixing that different mechanism would not address the current root cause: Multicast Source Discovery Protocol communicates source-active information between supported RPs.

D:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Its verification is distinct from the reported condition: Separate PIM-SM rendezvous points cannot discover active multicast sources registered at neighboring RPs. The corrected tree must respect source and group authorization.

Question 86

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A neighbor mistakenly announces hundreds of thousands of unexpected routes and threatens routing memory. The chosen route must have a valid data-plane next hop. Which technical mechanism most directly explains the symptom?

  1. Junos route filters distinguish exact matching from longer or longer-prefix patterns.
  2. A BGP prefix-limit control detects or constrains excessive received NLRI from a peer.
  3. BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy.
  4. Junos BGP best-path logic generally prefers the external route when preceding comparisons tie.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the governing mechanism is: A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. It explains the reported symptom: A neighbor mistakenly announces hundreds of thousands of unexpected routes and threatens routing memory. The intended response is: Configure reasonable warning and hard limits appropriate to each authorized address family. Verification: A bounded test demonstrates alerting or session protection when the accepted limit is exceeded.

Incorrect Answers

A:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. This alternative mechanism does not match the current fault.

C:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Fixing that different mechanism would not address the current root cause: a BGP prefix-limit control detects or constrains excessive received NLRI from a peer.

D:

Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. Its verification is distinct from the reported condition: A neighbor mistakenly announces hundreds of thousands of unexpected routes and threatens routing memory. The chosen route must have a valid data-plane next hop.

Question 87

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: A policer causes unexpected drops on short application bursts even though the long-term average rate is modest. The network must keep critical application latency within policy. What requirement most specifically calls for this approach?

  1. Use strict-priority scheduling for carefully bounded low-latency traffic.
  2. Use a scheduler map to connect forwarding classes to egress scheduling behavior.
  3. Use policer burst settings to allow reasonable transients within an enforced rate limit.
  4. Use per-queue statistics to diagnose CoS congestion rather than relying on aggregate utilization.

Explanation

Correct Answer

C:

For a congested enterprise WAN carrying video, voice and backups, this mechanism fits the requirement: Use policer burst settings to allow reasonable transients within an enforced rate limit. The design is appropriate because: Rate policers use token or burst parameters that influence which short bursts are considered conformant. In this scenario, the observed issue is: A policer causes unexpected drops on short application bursts even though the long-term average rate is modest. The corresponding implementation is: Tune supported policer bandwidth and burst size to the measured permitted traffic profile.

Incorrect Answers

A:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. The appropriate correction for the reported case is: Tune supported policer bandwidth and burst size to the measured permitted traffic profile.

B:

A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. Fixing that different mechanism would not address the current root cause: rate policers use token or burst parameters that influence which short bursts are considered conformant.

D:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. Its verification is distinct from the reported condition: A policer causes unexpected drops on short application bursts even though the long-term average rate is modest. The network must keep critical application latency within policy.

Question 88

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: Two external BGP routers are separated by intermediate routed devices and an ordinary directly connected peering does not work. The change must not introduce an unwanted autonomous-system route leak. Which precaution should be checked before committing the change?

  1. Check forwarding-loop risks if the advertiser does not actually forward by the advertised path.
  2. Avoid assuming an Established IPv4 BGP session proves IPv6 NLRI capability.
  3. Do not confuse BGP local preference with Junos protocol-level route preference.
  4. Check security filters and route symmetry to avoid accidental distant-peer admission.

Explanation

Correct Answer

D:

For a large organization using Junos route reflectors, the relevant safeguard is: Check security filters and route symmetry to avoid accidental distant-peer admission. It matters while implementing: Configure supported eBGP multihop behavior and reliable local-address selection for the approved peer. The fault involves: A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. The required acceptance result remains: The multi-hop session establishes and uses the intended loopback source and destination.

Incorrect Answers

A:

Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. The appropriate correction for the reported case is: Check security filters and route symmetry to avoid accidental distant-peer admission.

B:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Fixing that different mechanism would not address the current root cause: a nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint.

C:

BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones. Its verification is distinct from the reported condition: Two external BGP routers are separated by intermediate routed devices and an ordinary directly connected peering does not work. The change must not introduce an unwanted autonomous-system route leak.

Question 89

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: A campus needs certain incoming traffic to enter a VLAN based on packet attributes rather than only the fixed physical port. The intended segmentation and loop prevention must remain intact. What risk must the implementation avoid?

  1. Validate filter match order and feature support to avoid broad unintended reassignment.
  2. Check management and voice traffic before moving the physical switch port.
  3. Verify secondary-to-primary mappings on each switch in a multichassis deployment.
  4. Check LACP mode, member speed and VLAN consistency before bringing up the bundle.

Explanation

Correct Answer

A:

For a campus network built with Juniper EX switches, the relevant safeguard is: Validate filter match order and feature support to avoid broad unintended reassignment. It matters while implementing: Configure a supported Layer 2 firewall filter with the intended VLAN assignment action. The fault involves: Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. The required acceptance result remains: Matching test traffic enters the designated VLAN while nonmatching traffic follows default handling.

Incorrect Answers

B:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. The appropriate correction for the reported case is: Validate filter match order and feature support to avoid broad unintended reassignment.

C:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. Fixing that different mechanism would not address the current root cause: filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN.

D:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. Its verification is distinct from the reported condition: A campus needs certain incoming traffic to enter a VLAN based on packet attributes rather than only the fixed physical port. The intended segmentation and loop prevention must remain intact.

Question 90

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: Multicast traffic crosses a distant RP even after an efficient direct path to its sender is available. The corrected tree must respect source and group authorization. Which operational change most directly resolves the observed failure?

  1. Match and reject the prohibited source-group combinations with a suitable Junos multicast policy.
  2. Enable the supported SPT behavior and verify source-directed joins where appropriate.
  3. Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.
  4. Verify receiver joins and the relevant shared-tree multicast state toward the RP.

Explanation

Correct Answer

B:

For a multimedia training network running Junos multicast routers, the direct corrective action is: Enable the supported SPT behavior and verify source-directed joins where appropriate. This addresses the mechanism: PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. Confirm by checking: The multicast entry uses the source-rooted RPF path and traffic follows the shorter topology. During rollout, check traffic interruption and route symmetry before changing SPT thresholds broadly.

Incorrect Answers

A:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. The appropriate correction for the reported case is: Enable the supported SPT behavior and verify source-directed joins where appropriate.

C:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Fixing that different mechanism would not address the current root cause: PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree.

D:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Its verification is distinct from the reported condition: Multicast traffic crosses a distant RP even after an efficient direct path to its sender is available. The corrected tree must respect source and group authorization.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests