mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 10

Question 90

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: Multicast traffic crosses a distant RP even after an efficient direct path to its sender is available. The corrected tree must respect source and group authorization. Which operational change most directly resolves the observed failure?

  1. Match and reject the prohibited source-group combinations with a suitable Junos multicast policy.
  2. Enable the supported SPT behavior and verify source-directed joins where appropriate.
  3. Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.
  4. Verify receiver joins and the relevant shared-tree multicast state toward the RP.

Explanation

Correct Answer

B:

For a multimedia training network running Junos multicast routers, the direct corrective action is: Enable the supported SPT behavior and verify source-directed joins where appropriate. This addresses the mechanism: PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. Confirm by checking: The multicast entry uses the source-rooted RPF path and traffic follows the shorter topology. During rollout, check traffic interruption and route symmetry before changing SPT thresholds broadly.

Incorrect Answers

A:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. The appropriate correction for the reported case is: Enable the supported SPT behavior and verify source-directed joins where appropriate.

C:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Fixing that different mechanism would not address the current root cause: PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree.

D:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Its verification is distinct from the reported condition: Multicast traffic crosses a distant RP even after an efficient direct path to its sender is available. The corrected tree must respect source and group authorization.

Question 91

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The routing change must preserve control-plane consistency across areas. What important rollout safeguard is most relevant here?

  1. Do not make an ASBR-dependent area stub without checking redistribution requirements.
  2. Treat a virtual link as a controlled exception and plan a physical backbone repair.
  3. Separate advertisement failures from policy and forwarding installation faults.
  4. Do not redistribute every static route or default route without an approved prefix filter.

Explanation

Correct Answer

C:

For a university separating multiple OSPF areas, the relevant safeguard is: Separate advertisement failures from policy and forwarding installation faults. It matters while implementing: Compare show ospf database and LSAs against the intended origin and area boundaries. The fault involves: The link-state database and area LSA contents determine which routes the OSPF calculation can derive. The required acceptance result remains: The missing prefix is visible in an appropriate LSA and the downstream route becomes active.

Incorrect Answers

A:

A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. The appropriate correction for the reported case is: Separate advertisement failures from policy and forwarding installation faults.

B:

A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. Fixing that different mechanism would not address the current root cause: the link-state database and area LSA contents determine which routes the OSPF calculation can derive.

D:

Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. Its verification is distinct from the reported condition: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The routing change must preserve control-plane consistency across areas.

Question 92

At a hospital onboarding diverse employee devices, a Junos specialist investigates this scenario: An unmanaged visitor device does not answer 802.1X challenges yet should reach a limited onboarding network. Critical permitted endpoints need a documented authentication fallback. Which underlying distinction should guide troubleshooting?

  1. 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access.
  2. Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable.
  3. A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN.
  4. A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it.

Explanation

Correct Answer

D:

For a hospital onboarding diverse employee devices, the governing mechanism is: A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. It explains the reported symptom: An unmanaged visitor device does not answer 802.1X challenges yet should reach a limited onboarding network. The intended response is: Configure supported guest VLAN behavior and its restricted connectivity policy on the access port. Verification: The unauthenticated nonresponsive test client reaches only the approved onboarding services.

Incorrect Answers

A:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. This alternative mechanism does not match the current fault.

B:

Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. Fixing that different mechanism would not address the current root cause: a guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it.

C:

A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. Its verification is distinct from the reported condition: An unmanaged visitor device does not answer 802.1X challenges yet should reach a limited onboarding network. Critical permitted endpoints need a documented authentication fallback.

Question 93

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: Two equal eligible BGP paths exist but the forwarding table installs only one next hop. The routing policy must retain intended primary and backup paths. Which configuration adjustment should be made first to address this issue?

  1. Configure supported multipath and forwarding next-hop behavior for truly equivalent paths.
  2. Configure compatible graceful-restart behavior and timers across designated peers.
  3. Configure reasonable warning and hard limits appropriate to each authorized address family.
  4. Correct the peer-as setting for the specific external BGP neighbor and recheck the session.

Explanation

Correct Answer

A:

For a dual-homed business network peering with two upstream providers, the direct corrective action is: Configure supported multipath and forwarding next-hop behavior for truly equivalent paths. This addresses the mechanism: BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. Confirm by checking: The selected route has multiple eligible forwarding next hops and a traffic test uses both paths. During rollout, check symmetry, device scale and policy before enabling multipath on unequal links.

Incorrect Answers

B:

BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. The appropriate correction for the reported case is: Configure supported multipath and forwarding next-hop behavior for truly equivalent paths.

C:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Fixing that different mechanism would not address the current root cause: BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support.

D:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Its verification is distinct from the reported condition: Two equal eligible BGP paths exist but the forwarding table installs only one next hop. The routing policy must retain intended primary and backup paths.

Question 94

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: An isolated receiver VLAN stops forwarding multicast after a period because host membership information expires. The change must preserve source identity and avoid multicast loops. Which operational change most directly resolves the observed failure?

  1. Configure supported IGMP snooping and verify a reachable multicast-router port in the receiver VLAN.
  2. Provide an approved IGMP querier or routed multicast interface for the VLAN.
  3. Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic.
  4. Apply explicit multicast scope or PIM routing policy at the relevant domain boundary.

Explanation

Correct Answer

B:

For a live-event venue using routed multicast streaming, the direct corrective action is: Provide an approved IGMP querier or routed multicast interface for the VLAN. This addresses the mechanism: IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Confirm by checking: Group memberships persist across query intervals while idle receivers age out as intended. During rollout, avoid running competing unsupported querier configurations without election planning.

Incorrect Answers

A:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. The appropriate correction for the reported case is: Provide an approved IGMP querier or routed multicast interface for the VLAN.

C:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. Fixing that different mechanism would not address the current root cause: IGMP membership maintenance relies on periodic queries from a suitable multicast querier.

D:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Its verification is distinct from the reported condition: An isolated receiver VLAN stops forwarding multicast after a period because host membership information expires. The change must preserve source identity and avoid multicast loops.

Question 95

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A static route is present in the local Junos routing table but other OSPF routers never learn it. The routing change must preserve control-plane consistency across areas. For which use case is this feature the best match?

  1. Use a selective OSPF external default route for simple branch egress.
  2. Use OSPF stub areas to reduce external routing-state exposure in suitable branches.
  3. Use OSPF export policy to originate selected external routes from an ASBR.
  4. Use explicit per-interface OSPF area membership to form an approved internal adjacency.

Explanation

Correct Answer

C:

For a university separating multiple OSPF areas, this mechanism fits the requirement: Use OSPF export policy to originate selected external routes from an ASBR. The design is appropriate because: Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. In this scenario, the observed issue is: A static route is present in the local Junos routing table but other OSPF routers never learn it. The corresponding implementation is: Create a tightly scoped policy matching the intended static prefix and apply it as an OSPF export policy.

Incorrect Answers

A:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. The appropriate correction for the reported case is: Create a tightly scoped policy matching the intended static prefix and apply it as an OSPF export policy.

B:

A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. Fixing that different mechanism would not address the current root cause: junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability.

D:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Its verification is distinct from the reported condition: A static route is present in the local Junos routing table but other OSPF routers never learn it. The routing change must preserve control-plane consistency across areas.

Question 96

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: A multihomed VXLAN service receives duplicate flooded frames from two attached PEs. The engineer must verify both BGP EVPN signaling and underlay reachability. Which response best restores the intended behavior?

  1. Select a supported single-active multihoming design and check ESI and DF behavior.
  2. Configure a consistent nonconflicting ESI on the intended dual-homed attachment.
  3. Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets.
  4. Verify the designated-forwarder election and associated multihoming mode for the affected VLAN or Ethernet tag.

Explanation

Correct Answer

D:

For a service provider offering isolated VXLAN services, the direct corrective action is: Verify the designated-forwarder election and associated multihoming mode for the affected VLAN or Ethernet tag. This addresses the mechanism: EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments. Confirm by checking: Only the expected DF forwards designated BUM traffic on the multihomed segment. During rollout, validate election stability on failover to avoid a transient dual-forwarding storm.

Incorrect Answers

A:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. The appropriate correction for the reported case is: Verify the designated-forwarder election and associated multihoming mode for the affected VLAN or Ethernet tag.

B:

A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination. Fixing that different mechanism would not address the current root cause: EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments.

C:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Its verification is distinct from the reported condition: A multihomed VXLAN service receives duplicate flooded frames from two attached PEs. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 97

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: An adjacency flaps sporadically and ordinary summary commands do not explain the event sequence. The internal forwarding path must remain stable when one uplink fails. What is the most likely design-related cause?

  1. Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully.
  2. OSPF neighbors on a common link must agree on the area identifier used in Hello processing.
  3. A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas.
  4. Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability.

Explanation

Correct Answer

A:

For a national enterprise designing OSPF between offices, the governing mechanism is: Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. It explains the reported symptom: An adjacency flaps sporadically and ordinary summary commands do not explain the event sequence. The intended response is: Enable limited OSPF traceoptions with bounded logging, capture the failure and remove them afterward. Verification: Trace messages show the relevant neighbor-state transition and correction removes the repeat failure.

Incorrect Answers

B:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. This alternative mechanism does not match the current fault.

C:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Fixing that different mechanism would not address the current root cause: junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully.

D:

Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. Its verification is distinct from the reported condition: An adjacency flaps sporadically and ordinary summary commands do not explain the event sequence. The internal forwarding path must remain stable when one uplink fails.

Question 98

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: Two candidate BGP paths are comparable in earlier attributes but one was learned via eBGP and the other iBGP. The routing policy must retain intended primary and backup paths. Which technical mechanism most directly explains the symptom?

  1. iBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it.
  2. Junos BGP best-path logic generally prefers the external route when preceding comparisons tie.
  3. BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship.
  4. Both ends of a loopback-based BGP session must reach and recognize the configured local addresses.

Explanation

Correct Answer

B:

For a dual-homed business network peering with two upstream providers, the governing mechanism is: Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. It explains the reported symptom: Two candidate BGP paths are comparable in earlier attributes but one was learned via eBGP and the other iBGP. The intended response is: Review peer type and the complete path decision chain before adjusting selection policy. Verification: The active BGP path reflects eBGP preference only when earlier criteria do not decide first.

Incorrect Answers

A:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. This alternative mechanism does not match the current fault.

C:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Fixing that different mechanism would not address the current root cause: junos BGP best-path logic generally prefers the external route when preceding comparisons tie.

D:

Both ends of a loopback-based BGP session must reach and recognize the configured local addresses. Its verification is distinct from the reported condition: Two candidate BGP paths are comparable in earlier attributes but one was learned via eBGP and the other iBGP. The routing policy must retain intended primary and backup paths.

Question 99

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An OSPF route and a BGP route for the same prefix are both learned but only one enters active forwarding. The correction must not expose administrative network prefixes. What risk must the implementation avoid?

  1. Avoid shortening dead timers without checking CPU load and adjacent platform support.
  2. Distinguish topology LSAs from summary policy to avoid accidental intra-area isolation.
  3. Do not confuse Junos route preference with the BGP LOCAL_PREF attribute.
  4. Do not hide an actual failing link solely by increasing timers.

Explanation

Correct Answer

C:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Do not confuse Junos route preference with the BGP LOCAL_PREF attribute. It matters while implementing: Compare route preference and next-hop resolution before modifying any active path policy. The fault involves: Junos first chooses active routing-table entries using protocol route preference before forwarding installation. The required acceptance result remains: show route detail indicates the active entry and its protocol preference for the prefix.

Incorrect Answers

A:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. The appropriate correction for the reported case is: Do not confuse Junos route preference with the BGP LOCAL_PREF attribute.

B:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Fixing that different mechanism would not address the current root cause: junos first chooses active routing-table entries using protocol route preference before forwarding installation.

D:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. Its verification is distinct from the reported condition: An OSPF route and a BGP route for the same prefix are both learned but only one enters active forwarding. The correction must not expose administrative network prefixes.

Question 100

At a medical facility deploying high-power conference phones, a Junos specialist investigates this scenario: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The phone network must retain appropriate VLAN and voice QoS treatment. Which operational result would most clearly confirm the fix?

  1. Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN.
  2. The phone stays powered under a representative simultaneous high-load endpoint test.
  3. Switch power telemetry shows the correct allocated class and the phone operates stably.
  4. Phone packets receive intended priority during congestion and desktop traffic cannot impersonate it.

Explanation

Correct Answer

D:

For a medical facility deploying high-power conference phones, the decisive evidence is: Phone packets receive intended priority during congestion and desktop traffic cannot impersonate it. This validates the action: Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic. Because: Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. The appropriate correction for the reported case is: Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic.

B:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Fixing that different mechanism would not address the current root cause: voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment.

C:

PoE power classification informs the power source of the powered device's required allocation. Its verification is distinct from the reported condition: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The phone network must retain appropriate VLAN and voice QoS treatment.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests