mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 7

Question 60

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The internal forwarding path must remain stable when one uplink fails. What is the most likely design-related cause?

  1. OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.
  2. Neighbor compatibility depends on matching Hello and dead intervals for the participating link.
  3. Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects.
  4. A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos.

Explanation

Correct Answer

D:

For a national enterprise designing OSPF between offices, the governing mechanism is: A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos. It explains the reported symptom: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The intended response is: Configure supported OSPF passive behavior on the host-facing interface. Verification: The subnet is reachable from OSPF peers while no neighbor forms on the passive port.

Incorrect Answers

A:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. This alternative mechanism does not match the current fault.

B:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. Fixing that different mechanism would not address the current root cause: a passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos.

C:

Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. Its verification is distinct from the reported condition: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The internal forwarding path must remain stable when one uplink fails.

Question 61

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A desktop plugged into an EX switch receives traffic from an unexpected user VLAN. The service must preserve tags without bridging unrelated tenants. What is the most appropriate correction to implement?

  1. Set the intended VLAN membership on the access logical interface and verify the port mode.
  2. Configure a supported Layer 2 firewall filter with the intended VLAN assignment action.
  3. Assign distinct outer service VLAN identities to the independent customer services.
  4. Align the MSTP region attributes and intended VLAN mappings across the switches.

Explanation

Correct Answer

A:

For a provider Ethernet network carrying customer Layer 2 services, the direct corrective action is: Set the intended VLAN membership on the access logical interface and verify the port mode. This addresses the mechanism: An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Confirm by checking: show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet. During rollout, check management and voice traffic before moving the physical switch port.

Incorrect Answers

B:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. The appropriate correction for the reported case is: Set the intended VLAN membership on the access logical interface and verify the port mode.

C:

A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate. Fixing that different mechanism would not address the current root cause: an untagged Ethernet access port places endpoint traffic into its configured access VLAN.

D:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. Its verification is distinct from the reported condition: A desktop plugged into an EX switch receives traffic from an unexpected user VLAN. The service must preserve tags without bridging unrelated tenants.

Question 62

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: An ASM receiver joins a group without selecting one specific sender but engineers search only (S,G) entries. The corrected tree must respect source and group authorization. Which underlying distinction should guide troubleshooting?

  1. (S,G) multicast state identifies one particular source S and destination group G.
  2. Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources.
  3. PIM and multicast routing policy can be applied to limit permitted source and group reachability.
  4. IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations.

Explanation

Correct Answer

B:

For a multimedia training network running Junos multicast routers, the governing mechanism is: Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. It explains the reported symptom: An ASM receiver joins a group without selecting one specific sender but engineers search only (S,G) entries. The intended response is: Verify receiver joins and the relevant shared-tree multicast state toward the RP. Verification: The network reports expected (*,G) membership and delivers approved ASM traffic.

Incorrect Answers

A:

(S,G) multicast state identifies one particular source S and destination group G. This alternative mechanism does not match the current fault.

C:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Fixing that different mechanism would not address the current root cause: shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources.

D:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Its verification is distinct from the reported condition: An ASM receiver joins a group without selecting one specific sender but engineers search only (S,G) entries. The corrected tree must respect source and group authorization.

Question 63

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. Classification and downstream remarking must not be confused. What verification result should the engineer expect?

  1. The workstation's spoofed expedited marking is reset and voice retains the intended priority.
  2. Queue counters show the intended internal class and egress capture shows appropriate markings.
  3. A representative phone flow enters the chosen forwarding class while ordinary traffic remains best effort.
  4. Packets with the approved DSCP values enter the expected forwarding queues.

Explanation

Correct Answer

C:

For a financial services network enforcing trusted DSCP markings, the decisive evidence is: A representative phone flow enters the chosen forwarding class while ordinary traffic remains best effort. This validates the action: Create a narrowly matched classifier filter and apply it at the correct ingress logical interface. Because: A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

The ingress trust boundary decides whether external markings should be accepted or reclassified. The appropriate correction for the reported case is: Create a narrowly matched classifier filter and apply it at the correct ingress logical interface.

B:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Fixing that different mechanism would not address the current root cause: a multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class.

D:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Its verification is distinct from the reported condition: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. Classification and downstream remarking must not be confused.

Question 64

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A conferencing application expects an unknown multicast source but engineers require each client to specify a sender IP. The group traffic must reach interested receivers without flooding other locations. Which response best restores the intended behavior?

  1. Confirm neighbor priorities and configured DR role on the shared segment.
  2. Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling.
  3. Inspect multicast route, upstream interface and output interface list for the failed group.
  4. Design a suitable ASM group with functioning IGMP membership and rendezvous-point information.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, the direct corrective action is: Design a suitable ASM group with functioning IGMP membership and rendezvous-point information. This addresses the mechanism: Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. Confirm by checking: A receiver can join G and obtain traffic from an approved discovered sender. During rollout, consider unwanted sources and multicast boundary controls in an open ASM group.

Incorrect Answers

A:

PIM designated-router election selects the local router responsible for certain first-hop PIM functions. The appropriate correction for the reported case is: Design a suitable ASM group with functioning IGMP membership and rendezvous-point information.

B:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Fixing that different mechanism would not address the current root cause: any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism.

C:

Multicast forwarding depends on per-group and per-source route state in addition to host membership. Its verification is distinct from the reported condition: A conferencing application expects an unknown multicast source but engineers require each client to specify a sender IP. The group traffic must reach interested receivers without flooding other locations.

Question 65

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A broad policy accept term precedes a specific reject term and restricted prefixes are still announced. The diagnosis must distinguish a healthy BGP session from eligible received routes. What would demonstrate a successful correction under test?

  1. A policy test or advertised-route output confirms restricted prefixes are no longer accepted.
  2. A controlled restart retains eligible forwarding for the negotiated grace interval and recovers correctly.
  3. Accepted routes appear in the BGP route table and unwanted routes are rejected or hidden as intended.
  4. The selected route has multiple eligible forwarding next hops and a traffic test uses both paths.

Explanation

Correct Answer

A:

For a managed network team troubleshooting an internet edge, the decisive evidence is: A policy test or advertised-route output confirms restricted prefixes are no longer accepted. This validates the action: Place specific prefix rejection before a broader permitted match in the relevant policy. Because: Junos policy terms are evaluated in configured order and a terminating action can end processing early. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. The appropriate correction for the reported case is: Place specific prefix rejection before a broader permitted match in the relevant policy.

C:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. Fixing that different mechanism would not address the current root cause: junos policy terms are evaluated in configured order and a terminating action can end processing early.

D:

BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. Its verification is distinct from the reported condition: A broad policy accept term precedes a specific reject term and restricted prefixes are still announced. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 66

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The solution should not give workstation traffic untrusted voice privileges. Which operational change most directly resolves the observed failure?

  1. Publish the intended LLDP-MED voice network policy on the switch access port.
  2. Configure the intended voice VLAN and data VLAN relationship on the shared access connection.
  3. Check LLDP-MED power negotiation and available power on the phone's switch interface.
  4. Validate the phone passthrough configuration and Junos port VLAN membership for both traffic types.

Explanation

Correct Answer

B:

For a branch introducing an IP telephony access layer, the direct corrective action is: Configure the intended voice VLAN and data VLAN relationship on the shared access connection. This addresses the mechanism: A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. Confirm by checking: Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN. During rollout, check access policy and trunk tagging without granting the PC unauthorized voice-network privileges.

Incorrect Answers

A:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. The appropriate correction for the reported case is: Configure the intended voice VLAN and data VLAN relationship on the shared access connection.

C:

Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. Fixing that different mechanism would not address the current root cause: a voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.

D:

An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior. Its verification is distinct from the reported condition: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The solution should not give workstation traffic untrusted voice privileges.

Question 67

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: An employee connects a corporate laptop but the switch keeps the port unauthorized even though the IP network is functional. The switch must distinguish identity failures from absent authentication responses. Which operational result would most clearly confirm the fix?

  1. The intended printer gains restricted access while an unrecognized MAC does not inherit privileged resources.
  2. Each simulated endpoint type follows the correct method and receives its matching access policy.
  3. An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state.
  4. The guest sees the authorized portal and only obtains permitted access after the expected process.

Explanation

Correct Answer

C:

For a managed office network with printers and laptops, the decisive evidence is: An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state. This validates the action: Configure supported dot1x authenticator and RADIUS settings and verify valid supplicant credentials. Because: 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. The appropriate correction for the reported case is: Configure supported dot1x authenticator and RADIUS settings and verify valid supplicant credentials.

B:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. Fixing that different mechanism would not address the current root cause: 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access.

D:

Captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow. Its verification is distinct from the reported condition: An employee connects a corporate laptop but the switch keeps the port unauthorized even though the IP network is functional. The switch must distinguish identity failures from absent authentication responses.

Question 68

At a branch router serving several application classes, a Junos specialist investigates this scenario: A branch wants to smooth excess traffic over time but a policy immediately discards every burst above a fixed threshold. The team must validate packet drops by actual queue statistics. For which use case is this feature the best match?

  1. Use 802.1p classification on trusted VLAN-tagged Ethernet traffic.
  2. Use classification for local queue selection and rewrite for downstream codepoint presentation.
  3. Use multifield CoS classification when packet markings are absent or untrusted.
  4. Use shaping when traffic rate smoothing is preferred over immediate discard.

Explanation

Correct Answer

D:

For a branch router serving several application classes, this mechanism fits the requirement: Use shaping when traffic rate smoothing is preferred over immediate discard. The design is appropriate because: Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit. In this scenario, the observed issue is: A branch wants to smooth excess traffic over time but a policy immediately discards every burst above a fixed threshold. The corresponding implementation is: Use appropriate egress shaping for the traffic that must be rate-smoothed instead of indiscriminate ingress policing.

Incorrect Answers

A:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. The appropriate correction for the reported case is: Use appropriate egress shaping for the traffic that must be rate-smoothed instead of indiscriminate ingress policing.

B:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Fixing that different mechanism would not address the current root cause: shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit.

C:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Its verification is distinct from the reported condition: A branch wants to smooth excess traffic over time but a policy immediately discards every burst above a fixed threshold. The team must validate packet drops by actual queue statistics.

Question 69

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A one-way bridging condition causes a blocking port to stop receiving BPDUs and risk forwarding a loop. The proposed behavior must be validated on actual switching ports. What requirement most specifically calls for this approach?

  1. Use loop protection where missing BPDUs could cause erroneous forwarding.
  2. Use MSTP boundary analysis when interconnecting different spanning-tree domains.
  3. Use MSTP to preserve redundancy without Layer 2 forwarding loops.
  4. Use access VLAN assignment for a single untagged user segment.

Explanation

Correct Answer

A:

For a data-center access fabric using tagged trunks, this mechanism fits the requirement: Use loop protection where missing BPDUs could cause erroneous forwarding. The design is appropriate because: Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. In this scenario, the observed issue is: A one-way bridging condition causes a blocking port to stop receiving BPDUs and risk forwarding a loop. The corresponding implementation is: Enable supported loop protection on applicable redundant switching links.

Incorrect Answers

B:

MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. The appropriate correction for the reported case is: Enable supported loop protection on applicable redundant switching links.

C:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Fixing that different mechanism would not address the current root cause: loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear.

D:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: A one-way bridging condition causes a blocking port to stop receiving BPDUs and risk forwarding a loop. The proposed behavior must be validated on actual switching ports.

Question 70

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: An access switch unexpectedly becomes the root bridge and traffic takes a slow path through the campus. The change must retain both link resilience and correct VLAN isolation. Which operational change most directly resolves the observed failure?

  1. Align the MSTP region attributes and intended VLAN mappings across the switches.
  2. Set supported bridge priorities so designated distribution switches become root and backup root.
  3. Increase supported link MTU consistently or adjust customer frame limits where required.
  4. Enable a consistent MSTP topology and verify the expected alternate-port state.

Explanation

Correct Answer

B:

For a large enterprise updating redundant switch links, the direct corrective action is: Set supported bridge priorities so designated distribution switches become root and backup root. This addresses the mechanism: Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance. Confirm by checking: show spanning-tree bridge identifies the intended root for each MST instance. During rollout, preserve redundant root placement and test topology changes outside production peaks.

Incorrect Answers

A:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. The appropriate correction for the reported case is: Set supported bridge priorities so designated distribution switches become root and backup root.

C:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Fixing that different mechanism would not address the current root cause: spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance.

D:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Its verification is distinct from the reported condition: An access switch unexpectedly becomes the root bridge and traffic takes a slow path through the campus. The change must retain both link resilience and correct VLAN isolation.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests