mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 11

Question 100

At a medical facility deploying high-power conference phones, a Junos specialist investigates this scenario: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The phone network must retain appropriate VLAN and voice QoS treatment. Which operational result would most clearly confirm the fix?

  1. Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN.
  2. The phone stays powered under a representative simultaneous high-load endpoint test.
  3. Switch power telemetry shows the correct allocated class and the phone operates stably.
  4. Phone packets receive intended priority during congestion and desktop traffic cannot impersonate it.

Explanation

Correct Answer

D:

For a medical facility deploying high-power conference phones, the decisive evidence is: Phone packets receive intended priority during congestion and desktop traffic cannot impersonate it. This validates the action: Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic. Because: Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. The appropriate correction for the reported case is: Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic.

B:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Fixing that different mechanism would not address the current root cause: voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment.

C:

PoE power classification informs the power source of the powered device's required allocation. Its verification is distinct from the reported condition: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The phone network must retain appropriate VLAN and voice QoS treatment.

Question 101

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: A remote router selects an external OSPF path unexpectedly because external metrics are compared differently. The internal forwarding path must remain stable when one uplink fails. What verification result should the engineer expect?

  1. Routes select the expected exit under different internal distances when tested.
  2. The link operates with the intended point-to-point adjacency without DR election.
  3. The missing prefix is visible in an appropriate LSA and the downstream route becomes active.
  4. show ospf neighbor shows the intended DR and BDR roles and stable adjacency states.

Explanation

Correct Answer

A:

For a national enterprise designing OSPF between offices, the decisive evidence is: Routes select the expected exit under different internal distances when tested. This validates the action: Choose the intended external metric type for the redistributed prefix and validate path selection. Because: Type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. The appropriate correction for the reported case is: Choose the intended external metric type for the redistributed prefix and validate path selection.

C:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. Fixing that different mechanism would not address the current root cause: type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection.

D:

On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. Its verification is distinct from the reported condition: A remote router selects an external OSPF path unexpectedly because external metrics are compared differently. The internal forwarding path must remain stable when one uplink fails.

Question 102

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: A circuit works for short frames but drops full-size customer frames after stacked VLAN tagging is enabled. The change must retain both link resilience and correct VLAN isolation. What verification result should the engineer expect?

  1. Root and port states remain stable on both sides during controlled link transitions.
  2. Maximum expected tagged frames traverse every provider hop without oversize drops.
  3. Captures show preserved inner customer tags inside the expected outer service tag.
  4. Both participating switches learn the correct registered VLAN and forward its traffic.

Explanation

Correct Answer

B:

For a large enterprise updating redundant switch links, the decisive evidence is: Maximum expected tagged frames traverse every provider hop without oversize drops. This validates the action: Increase supported link MTU consistently or adjust customer frame limits where required. Because: Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. The appropriate correction for the reported case is: Increase supported link MTU consistently or adjust customer frame limits where required.

C:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Fixing that different mechanism would not address the current root cause: adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU.

D:

Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. Its verification is distinct from the reported condition: A circuit works for short frames but drops full-size customer frames after stacked VLAN tagging is enabled. The change must retain both link resilience and correct VLAN isolation.

Question 103

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The change must not introduce an unwanted autonomous-system route leak. When would the described mechanism be appropriate?

  1. Use BGP route reflectors to scale internal route distribution beyond a full mesh.
  2. Use BGP communities to classify groups of prefixes for routing policy.
  3. Use selective damping when repeated instability warrants controlled suppression.
  4. Use stable loopback addresses for resilient internal BGP sessions.

Explanation

Correct Answer

C:

For a large organization using Junos route reflectors, this mechanism fits the requirement: Use selective damping when repeated instability warrants controlled suppression. The design is appropriate because: Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. In this scenario, the observed issue is: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The corresponding implementation is: Evaluate and apply a supported carefully scoped damping policy only where warranted.

Incorrect Answers

A:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. The appropriate correction for the reported case is: Evaluate and apply a supported carefully scoped damping policy only where warranted.

B:

BGP community attributes carry policy tags that importing or exporting routers can match. Fixing that different mechanism would not address the current root cause: route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules.

D:

Both ends of a loopback-based BGP session must reach and recognize the configured local addresses. Its verification is distinct from the reported condition: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The change must not introduce an unwanted autonomous-system route leak. When would the described mechanism be appropriate.

Question 104

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: A VXLAN broadcast frame never reaches remote VTEPs even though known unicast MAC lookups work. The design must avoid forwarding loops during failover. What important rollout safeguard is most relevant here?

  1. Validate election stability on failover to avoid a transient dual-forwarding storm.
  2. Avoid reusing one VNI for unrelated tenant isolation boundaries.
  3. Check duplicate MAC and route-target behavior before forcing remote FDB entries.
  4. Constrain flooding domain and avoid replicating unknown unicast to unauthorized VTEPs.

Explanation

Correct Answer

D:

For a multihomed data center using redundant Ethernet segments, the relevant safeguard is: Constrain flooding domain and avoid replicating unknown unicast to unauthorized VTEPs. It matters while implementing: Ensure eligible IMET route advertisements and the configured VXLAN replication mechanism are consistent. The fault involves: EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership. The required acceptance result remains: Remote VTEPs have the expected BUM distribution list and ARP broadcast traffic arrives.

Incorrect Answers

A:

EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments. The appropriate correction for the reported case is: Constrain flooding domain and avoid replicating unknown unicast to unauthorized VTEPs.

B:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Fixing that different mechanism would not address the current root cause: EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership.

C:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Its verification is distinct from the reported condition: A VXLAN broadcast frame never reaches remote VTEPs even though known unicast MAC lookups work. The design must avoid forwarding loops during failover.

Question 105

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: A multihomed VXLAN service receives duplicate flooded frames from two attached PEs. The design must avoid forwarding loops during failover. What verification result should the engineer expect?

  1. Only the expected DF forwards designated BUM traffic on the multihomed segment.
  2. Each PE sees its expected remote multihoming peers and a consistent segment identity.
  3. Only matching tenant MAC and prefix advertisements enter each isolated EVPN instance.
  4. A test host in one VLAN exchanges frames only with its matching remote VNI segment.

Explanation

Correct Answer

A:

For a multihomed data center using redundant Ethernet segments, the decisive evidence is: Only the expected DF forwards designated BUM traffic on the multihomed segment. This validates the action: Verify the designated-forwarder election and associated multihoming mode for the affected VLAN or Ethernet tag. Because: EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. The appropriate correction for the reported case is: Verify the designated-forwarder election and associated multihoming mode for the affected VLAN or Ethernet tag.

C:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. Fixing that different mechanism would not address the current root cause: EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments.

D:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Its verification is distinct from the reported condition: A multihomed VXLAN service receives duplicate flooded frames from two attached PEs. The design must avoid forwarding loops during failover.

Question 106

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A multicast router drops a received stream even though its physical receiving interface is up. The team should test joins and forwarding separately. What protocol behavior accounts for this failure?

  1. IGMPv3 membership records can identify source filters that enable explicit SSM interest.
  2. Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP.
  3. IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN.
  4. Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources.

Explanation

Correct Answer

B:

For an enterprise telemetry network with multicast subscribers, the governing mechanism is: Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. It explains the reported symptom: A multicast router drops a received stream even though its physical receiving interface is up. The intended response is: Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface. Verification: The multicast forwarding state uses the intended RPF interface and packet discard counters stop increasing.

Incorrect Answers

A:

IGMPv3 membership records can identify source filters that enable explicit SSM interest. This alternative mechanism does not match the current fault.

C:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Fixing that different mechanism would not address the current root cause: multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP.

D:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Its verification is distinct from the reported condition: A multicast router drops a received stream even though its physical receiving interface is up. The team should test joins and forwarding separately.

Question 107

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: An adjacency flaps sporadically and ordinary summary commands do not explain the event sequence. The team must validate neighbor state rather than assume basic IP reachability proves routing. What risk must the implementation avoid?

  1. Treat a virtual link as a controlled exception and plan a physical backbone repair.
  2. Keep reference bandwidth consistent across routers to avoid asymmetric route decisions.
  3. Limit logging rate and storage consumption in production while collecting traces.
  4. Verify IPv6 link-local interface reachability and security filters before assuming IPv4 OSPF proves readiness.

Explanation

Correct Answer

C:

For a regional provider operating Junos-based branch routers, the relevant safeguard is: Limit logging rate and storage consumption in production while collecting traces. It matters while implementing: Enable limited OSPF traceoptions with bounded logging, capture the failure and remove them afterward. The fault involves: Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. The required acceptance result remains: Trace messages show the relevant neighbor-state transition and correction removes the repeat failure.

Incorrect Answers

A:

A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. The appropriate correction for the reported case is: Limit logging rate and storage consumption in production while collecting traces.

B:

OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain. Fixing that different mechanism would not address the current root cause: junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully.

D:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Its verification is distinct from the reported condition: An adjacency flaps sporadically and ordinary summary commands do not explain the event sequence. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 108

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: A tenant requires only one active forwarding attachment at a time but both dual-homed PEs transmit simultaneously. The tenant traffic must remain isolated across the overlay. What important rollout safeguard is most relevant here?

  1. Verify platform and release-specific EVPN support rather than enabling every address family indiscriminately.
  2. Check all-active versus single-active semantics before changing failover advertisements.
  3. Validate split-horizon, DF and CE LAG behavior so redundancy does not create loops.
  4. Coordinate access-side LAG and platform semantics before mixing single-active and all-active policies.

Explanation

Correct Answer

D:

For a Junos EVPN-VXLAN leaf-spine fabric, the relevant safeguard is: Coordinate access-side LAG and platform semantics before mixing single-active and all-active policies. It matters while implementing: Select a supported single-active multihoming design and check ESI and DF behavior. The fault involves: EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. The required acceptance result remains: Only the elected active side forwards tenant traffic until controlled failover.

Incorrect Answers

A:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. The appropriate correction for the reported case is: Coordinate access-side LAG and platform semantics before mixing single-active and all-active policies.

B:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Fixing that different mechanism would not address the current root cause: EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE.

C:

EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention. Its verification is distinct from the reported condition: A tenant requires only one active forwarding attachment at a time but both dual-homed PEs transmit simultaneously. The tenant traffic must remain isolated across the overlay.

Question 109

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: A high-capacity phone reports insufficient power even though the switch's overall power budget is adequate. The solution should not give workstation traffic untrusted voice privileges. Which design objective is best served by this mechanism?

  1. Use LLDP power negotiation for compatible phones with varying power requirements.
  2. Use LLDP-MED to signal voice VLAN settings to compatible IP phones.
  3. Use LLDP to discover directly connected Ethernet neighbors.
  4. Use PoE capacity planning when many phones draw power from one access switch.

Explanation

Correct Answer

A:

For a branch introducing an IP telephony access layer, this mechanism fits the requirement: Use LLDP power negotiation for compatible phones with varying power requirements. The design is appropriate because: Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. In this scenario, the observed issue is: A high-capacity phone reports insufficient power even though the switch's overall power budget is adequate. The corresponding implementation is: Check LLDP-MED power negotiation and available power on the phone's switch interface.

Incorrect Answers

B:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. The appropriate correction for the reported case is: Check LLDP-MED power negotiation and available power on the phone's switch interface.

C:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Fixing that different mechanism would not address the current root cause: supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions.

D:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Its verification is distinct from the reported condition: A high-capacity phone reports insufficient power even though the switch's overall power budget is adequate. The solution should not give workstation traffic untrusted voice privileges.

Question 110

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: A downstream user workstation marks backup traffic as high priority and competes with voice in the protected queue. Classification and downstream remarking must not be confused. What protocol behavior accounts for this failure?

  1. Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit.
  2. The ingress trust boundary decides whether external markings should be accepted or reclassified.
  3. Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints.
  4. Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported.

Explanation

Correct Answer

B:

For a financial services network enforcing trusted DSCP markings, the governing mechanism is: The ingress trust boundary decides whether external markings should be accepted or reclassified. It explains the reported symptom: A downstream user workstation marks backup traffic as high priority and competes with voice in the protected queue. The intended response is: Apply a controlled classifier or policer for untrusted ports while trusting only authorized phone or uplink markings. Verification: The workstation's spoofed expedited marking is reset and voice retains the intended priority.

Incorrect Answers

A:

Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit. This alternative mechanism does not match the current fault.

C:

Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. Fixing that different mechanism would not address the current root cause: the ingress trust boundary decides whether external markings should be accepted or reclassified.

D:

Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. Its verification is distinct from the reported condition: A downstream user workstation marks backup traffic as high priority and competes with voice in the protected queue. Classification and downstream remarking must not be confused.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests