mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 76

Question 750

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An OSPF stub area receives or expects external LSA behavior incompatible with its intended design. The correction must not expose administrative network prefixes. What risk must the implementation avoid?

  1. Do not confuse Junos route preference with the BGP LOCAL_PREF attribute.
  2. Do not make an ASBR-dependent area stub without checking redistribution requirements.
  3. Check address families and filtering carefully to avoid importing every static IPv6 route.
  4. Do not change the backbone area relationship without validating ABR connectivity.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Do not make an ASBR-dependent area stub without checking redistribution requirements. It matters while implementing: Configure a compatible stub-area type throughout the area and validate ABR default behavior. The fault involves: A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. The required acceptance result remains: Area routers learn a usable default route without inappropriate external LSAs.

Incorrect Answers

A:

Junos first chooses active routing-table entries using protocol route preference before forwarding installation. The appropriate correction for the reported case is: Do not make an ASBR-dependent area stub without checking redistribution requirements.

C:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Fixing that different mechanism would not address the current root cause: a conventional stub area limits external LSAs and uses a suitable default route for outside reachability.

D:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Its verification is distinct from the reported condition: An OSPF stub area receives or expects external LSA behavior incompatible with its intended design. The correction must not expose administrative network prefixes.

Question 751

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: Two available OSPF WAN paths use the less desirable circuit even though both adjacencies are healthy. The team must validate neighbor state rather than assume basic IP reachability proves routing. When would the described mechanism be appropriate?

  1. Use explicit per-interface OSPF area membership to form an approved internal adjacency.
  2. Use OSPF authentication to control trusted routing neighbors on supported links.
  3. Use OSPF interface costs to prefer one internal path over another.
  4. Use matching Hello and dead timers when a link needs a stable OSPF neighbor relationship.

Explanation

Correct Answer

C:

For a regional provider operating Junos-based branch routers, this mechanism fits the requirement: Use OSPF interface costs to prefer one internal path over another. The design is appropriate because: OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. In this scenario, the observed issue is: Two available OSPF WAN paths use the less desirable circuit even though both adjacencies are healthy. The corresponding implementation is: Set appropriate interface metrics that reflect the desired route costs across the topology.

Incorrect Answers

A:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. The appropriate correction for the reported case is: Set appropriate interface metrics that reflect the desired route costs across the topology.

B:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. Fixing that different mechanism would not address the current root cause: OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits.

D:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. Its verification is distinct from the reported condition: Two available OSPF WAN paths use the less desirable circuit even though both adjacencies are healthy. The team must validate neighbor state rather than assume basic IP reachability proves routing. When would the described mechanism be appropriate.

Question 752

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A one-way bridging condition causes a blocking port to stop receiving BPDUs and risk forwarding a loop. The proposed behavior must be validated on actual switching ports. Which operational result would most clearly confirm the fix?

  1. Both participating switches learn the correct registered VLAN and forward its traffic.
  2. A loop-free topology has one blocked alternate path that activates after a controlled failure.
  3. show spanning-tree interface reports the planned instance port roles for each mapped VLAN.
  4. A simulated BPDU loss creates a protected state without allowing a loop.

Explanation

Correct Answer

D:

For a data-center access fabric using tagged trunks, the decisive evidence is: A simulated BPDU loss creates a protected state without allowing a loop. This validates the action: Enable supported loop protection on applicable redundant switching links. Because: Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. The appropriate correction for the reported case is: Enable supported loop protection on applicable redundant switching links.

B:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Fixing that different mechanism would not address the current root cause: loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear.

C:

Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances. Its verification is distinct from the reported condition: A one-way bridging condition causes a blocking port to stop receiving BPDUs and risk forwarding a loop. The proposed behavior must be validated on actual switching ports.

Question 753

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: Engineers change a DSCP rewrite rule expecting packets to move into a different local output queue. The network must keep critical application latency within policy. Which technical mechanism most directly explains the symptom?

  1. Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets.
  2. Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints.
  3. Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior.
  4. A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.

Explanation

Correct Answer

A:

For a congested enterprise WAN carrying video, voice and backups, the governing mechanism is: Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. It explains the reported symptom: Engineers change a DSCP rewrite rule expecting packets to move into a different local output queue. The intended response is: Fix the relevant ingress classifier or multifield policy rather than only rewriting outgoing DSCP. Verification: Queue counters show the intended internal class and egress capture shows appropriate markings.

Incorrect Answers

B:

Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. This alternative mechanism does not match the current fault.

C:

Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. Fixing that different mechanism would not address the current root cause: classification determines internal forwarding class while rewrite rules modify markings on outgoing packets.

D:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Its verification is distinct from the reported condition: Engineers change a DSCP rewrite rule expecting packets to move into a different local output queue. The network must keep critical application latency within policy.

Question 754

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The change must preserve source identity and avoid multicast loops. What is the most likely design-related cause?

  1. PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs.
  2. Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point.
  3. (S,G) multicast state identifies one particular source S and destination group G.
  4. PIM designated-router election selects the local router responsible for certain first-hop PIM functions.

Explanation

Correct Answer

B:

For a live-event venue using routed multicast streaming, the governing mechanism is: Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. It explains the reported symptom: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The intended response is: Use an approved SSM group and source-aware receiver membership with compatible PIM behavior. Verification: Only packets from the selected source reach receivers of that SSM group.

Incorrect Answers

A:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. This alternative mechanism does not match the current fault.

C:

(S,G) multicast state identifies one particular source S and destination group G. Fixing that different mechanism would not address the current root cause: source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point.

D:

PIM designated-router election selects the local router responsible for certain first-hop PIM functions. Its verification is distinct from the reported condition: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The change must preserve source identity and avoid multicast loops.

Question 755

At a new office connecting VoIP phones to EX access switches, a Junos specialist investigates this scenario: A new IP phone requests a higher supported power class but is limited to a default allocation and fails to start. The rollout must support phones and connected workstations securely. What protocol behavior accounts for this failure?

  1. Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment.
  2. PoE availability depends on available switch power budget and each attached device's negotiated consumption.
  3. PoE power classification informs the power source of the powered device's required allocation.
  4. An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior.

Explanation

Correct Answer

C:

For a new office connecting VoIP phones to EX access switches, the governing mechanism is: PoE power classification informs the power source of the powered device's required allocation. It explains the reported symptom: A new IP phone requests a higher supported power class but is limited to a default allocation and fails to start. The intended response is: Enable appropriate PoE class handling and compatible power negotiation for the phone. Verification: Switch power telemetry shows the correct allocated class and the phone operates stably.

Incorrect Answers

A:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. This alternative mechanism does not match the current fault.

B:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Fixing that different mechanism would not address the current root cause: poE power classification informs the power source of the powered device's required allocation.

D:

An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior. Its verification is distinct from the reported condition: A new IP phone requests a higher supported power class but is limited to a default allocation and fails to start. The rollout must support phones and connected workstations securely.

Question 756

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: Two route reflectors use inconsistent cluster settings and reflected path behavior differs after failover. The chosen route must have a valid data-plane next hop. What important rollout safeguard is most relevant here?

  1. Confirm the advertising router actually has valid egress before making it a transit hop.
  2. Check forwarding-loop risks if the advertiser does not actually forward by the advertised path.
  3. Preserve reflector redundancy and cluster design to avoid hidden routing loops.
  4. Do not reuse cluster identifiers carelessly across unrelated reflection domains.

Explanation

Correct Answer

D:

For an enterprise core exchanging BGP routes over redundant WAN paths, the relevant safeguard is: Do not reuse cluster identifiers carelessly across unrelated reflection domains. It matters while implementing: Align the designed cluster identifier among redundant reflectors serving the same cluster. The fault involves: Route reflector cluster identifiers participate in loop detection on reflected BGP paths. The required acceptance result remains: Reflected routes contain expected cluster-list information and survive individual reflector failure.

Incorrect Answers

A:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. The appropriate correction for the reported case is: Do not reuse cluster identifiers carelessly across unrelated reflection domains.

B:

Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. Fixing that different mechanism would not address the current root cause: route reflector cluster identifiers participate in loop detection on reflected BGP paths.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Its verification is distinct from the reported condition: Two route reflectors use inconsistent cluster settings and reflected path behavior differs after failover. The chosen route must have a valid data-plane next hop.

Question 757

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The overlay must relearn host reachability without stale tunnel selection. What is the most appropriate correction to implement?

  1. Configure a consistent nonconflicting ESI on the intended dual-homed attachment.
  2. Ensure eligible IMET route advertisements and the configured VXLAN replication mechanism are consistent.
  3. Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes.
  4. Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets.

Explanation

Correct Answer

A:

For an enterprise migrating virtual machines between racks, the direct corrective action is: Configure a consistent nonconflicting ESI on the intended dual-homed attachment. This addresses the mechanism: A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination. Confirm by checking: Both participating leaves advertise the same segment identity and remote EVPN state reflects multihoming. During rollout, do not assign one ESI to physically unrelated server or tenant attachments.

Incorrect Answers

B:

EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership. The appropriate correction for the reported case is: Configure a consistent nonconflicting ESI on the intended dual-homed attachment.

C:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Fixing that different mechanism would not address the current root cause: a common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination.

D:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Its verification is distinct from the reported condition: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The overlay must relearn host reachability without stale tunnel selection.

Question 758

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The change must retain both link resilience and correct VLAN isolation. What requirement most specifically calls for this approach?

  1. Use a private VLAN promiscuous port to provide common gateway access.
  2. Use root protection to keep the intended spanning-tree root hierarchy.
  3. Account for Q-in-Q encapsulation overhead when planning L2 transport MTU.
  4. Use the Ethernet switching table to explain known unicast forwarding.

Explanation

Correct Answer

B:

For a large enterprise updating redundant switch links, this mechanism fits the requirement: Use root protection to keep the intended spanning-tree root hierarchy. The design is appropriate because: Root protection can prevent a specified port from accepting an unexpected superior root advertisement. In this scenario, the observed issue is: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The corresponding implementation is: Configure supported spanning-tree root protection on the relevant downstream boundary.

Incorrect Answers

A:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. The appropriate correction for the reported case is: Configure supported spanning-tree root protection on the relevant downstream boundary.

C:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Fixing that different mechanism would not address the current root cause: root protection can prevent a specified port from accepting an unexpected superior root advertisement.

D:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. Its verification is distinct from the reported condition: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The change must retain both link resilience and correct VLAN isolation.

Question 759

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The switch must distinguish identity failures from absent authentication responses. What verification result should the engineer expect?

  1. An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state.
  2. The guest sees the authorized portal and only obtains permitted access after the expected process.
  3. The wrong-credential test client reaches only the intended reject services and not protected LANs.
  4. The unauthenticated nonresponsive test client reaches only the approved onboarding services.

Explanation

Correct Answer

C:

For a managed office network with printers and laptops, the decisive evidence is: The wrong-credential test client reaches only the intended reject services and not protected LANs. This validates the action: Configure supported server-reject access behavior and a restricted reject VLAN policy. Because: A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. The appropriate correction for the reported case is: Configure supported server-reject access behavior and a restricted reject VLAN policy.

B:

Captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow. Fixing that different mechanism would not address the current root cause: a RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN.

D:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Its verification is distinct from the reported condition: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The switch must distinguish identity failures from absent authentication responses.

Question 760

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An external BGP peering repeatedly fails negotiation because the configured peer AS differs from the neighbor's actual AS. The diagnosis must distinguish a healthy BGP session from eligible received routes. What is the most appropriate correction to implement?

  1. Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified.
  2. Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect.
  3. Configure the approved internal BGP group with correct peer addresses and peer AS membership.
  4. Correct the peer-as setting for the specific external BGP neighbor and recheck the session.

Explanation

Correct Answer

D:

For a managed network team troubleshooting an internet edge, the direct corrective action is: Correct the peer-as setting for the specific external BGP neighbor and recheck the session. This addresses the mechanism: BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Confirm by checking: show BGP neighbor reports Established with the expected external peer AS. During rollout, verify provider documentation and do not broaden peer trust to arbitrary autonomous systems.

Incorrect Answers

A:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. The appropriate correction for the reported case is: Correct the peer-as setting for the specific external BGP neighbor and recheck the session.

B:

BGP depends on a reachable TCP transport path, normally using destination port 179. Fixing that different mechanism would not address the current root cause: BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship.

C:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Its verification is distinct from the reported condition: An external BGP peering repeatedly fails negotiation because the configured peer AS differs from the neighbor's actual AS. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests