mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 74

Question 730

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The intended segmentation and loop prevention must remain intact. What protocol behavior accounts for this failure?

  1. Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain.
  2. A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate.
  3. Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN.
  4. IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.

Explanation

Correct Answer

B:

For a campus network built with Juniper EX switches, the governing mechanism is: A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate. It explains the reported symptom: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The intended response is: Assign distinct outer service VLAN identities to the independent customer services. Verification: Captures show identical inner tags transported only within their intended outer service VLANs.

Incorrect Answers

A:

Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. This alternative mechanism does not match the current fault.

C:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. Fixing that different mechanism would not address the current root cause: a provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate.

D:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Its verification is distinct from the reported condition: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The intended segmentation and loop prevention must remain intact.

Question 731

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: Many individual branch prefixes are announced between areas and inflate other areas' route tables. The team must validate neighbor state rather than assume basic IP reachability proves routing. What is the most appropriate correction to implement?

  1. Configure a compatible stub-area type throughout the area and validate ABR default behavior.
  2. Apply a targeted interarea summarization or route-control policy at the correct OSPF hierarchy.
  3. Configure appropriate ABR area-range summarization with valid aggregate boundaries.
  4. Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection.

Explanation

Correct Answer

C:

For a regional provider operating Junos-based branch routers, the direct corrective action is: Configure appropriate ABR area-range summarization with valid aggregate boundaries. This addresses the mechanism: An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. Confirm by checking: Remote areas receive the expected summarized routes and excluded addresses do not blackhole. During rollout, check holes in address allocation and failover behavior before suppressing specifics.

Incorrect Answers

A:

A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. The appropriate correction for the reported case is: Configure appropriate ABR area-range summarization with valid aggregate boundaries.

B:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Fixing that different mechanism would not address the current root cause: an OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation.

D:

Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. Its verification is distinct from the reported condition: Many individual branch prefixes are announced between areas and inflate other areas' route tables. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 732

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An OSPF neighbor remains in ExStart or Exchange although basic connectivity and Hellos work. The routing change must preserve control-plane consistency across areas. Which operational change most directly resolves the observed failure?

  1. Export only the authorized default route and confirm its next-hop and forwarding path.
  2. Configure the intended OSPFv3 area and IPv6-enabled link interfaces on both peers.
  3. Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements.
  4. Correct the relevant link MTU on both endpoints and restart adjacency safely if necessary.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, the direct corrective action is: Correct the relevant link MTU on both endpoints and restart adjacency safely if necessary. This addresses the mechanism: Database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link. Confirm by checking: The neighbor leaves ExStart and reaches Full with synchronized link-state databases. During rollout, do not mask a real MTU mismatch with a blanket interoperability workaround without testing traffic.

Incorrect Answers

A:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. The appropriate correction for the reported case is: Correct the relevant link MTU on both endpoints and restart adjacency safely if necessary.

B:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Fixing that different mechanism would not address the current root cause: database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link.

C:

Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. Its verification is distinct from the reported condition: An OSPF neighbor remains in ExStart or Exchange although basic connectivity and Hellos work. The routing change must preserve control-plane consistency across areas.

Question 733

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A static route is present in the local Junos routing table but other OSPF routers never learn it. The routing change must preserve control-plane consistency across areas. What is the most appropriate correction to implement?

  1. Create a tightly scoped policy matching the intended static prefix and apply it as an OSPF export policy.
  2. Configure a supported OSPF point-to-point network type consistently on the dedicated link.
  3. Configure the intended OSPFv3 area and IPv6-enabled link interfaces on both peers.
  4. Export only the authorized default route and confirm its next-hop and forwarding path.

Explanation

Correct Answer

A:

For a university separating multiple OSPF areas, the direct corrective action is: Create a tightly scoped policy matching the intended static prefix and apply it as an OSPF export policy. This addresses the mechanism: Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. Confirm by checking: show route protocol ospf on another router reveals the advertised external prefix. During rollout, do not redistribute every static route or default route without an approved prefix filter.

Incorrect Answers

B:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. The appropriate correction for the reported case is: Create a tightly scoped policy matching the intended static prefix and apply it as an OSPF export policy.

C:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Fixing that different mechanism would not address the current root cause: junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability.

D:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. Its verification is distinct from the reported condition: A static route is present in the local Junos routing table but other OSPF routers never learn it. The routing change must preserve control-plane consistency across areas.

Question 734

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The chosen route must have a valid data-plane next hop. What important rollout safeguard is most relevant here?

  1. Do not prepend sensitive internal ASNs indiscriminately or claim guaranteed internet-wide steering.
  2. Check local preference and next-hop reachability first because they can override this comparison.
  3. Confirm the advertising router actually has valid egress before making it a transit hop.
  4. Avoid setting next hop to self without confirming the chosen egress can actually forward the traffic.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the relevant safeguard is: Check local preference and next-hop reachability first because they can override this comparison. It matters while implementing: Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified. The fault involves: In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. The required acceptance result remains: show route protocol BGP reveals the selected path and its AS-path sequence.

Incorrect Answers

A:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. The appropriate correction for the reported case is: Check local preference and next-hop reachability first because they can override this comparison.

C:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Fixing that different mechanism would not address the current root cause: In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.

D:

A usable BGP route requires an eligible reachable forwarding next hop before it can become active. Its verification is distinct from the reported condition: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The chosen route must have a valid data-plane next hop.

Question 735

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The team should test joins and forwarding separately. What verification result should the engineer expect?

  1. An eligible receiver joins the IPv6 multicast group and receives one expected copy.
  2. A receiver can join G and obtain traffic from an approved discovered sender.
  3. The expected multicast forwarding entry contains its correct upstream and downstream interfaces.
  4. Subscribers join the selected multicast group and receive matching test packets.

Explanation

Correct Answer

C:

For an enterprise telemetry network with multicast subscribers, the decisive evidence is: The expected multicast forwarding entry contains its correct upstream and downstream interfaces. This validates the action: Inspect multicast route, upstream interface and output interface list for the failed group. Because: Multicast forwarding depends on per-group and per-source route state in addition to host membership. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

IPv6 multicast destinations begin in the FF00::/8 range and include scope information. The appropriate correction for the reported case is: Inspect multicast route, upstream interface and output interface list for the failed group.

B:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. Fixing that different mechanism would not address the current root cause: multicast forwarding depends on per-group and per-source route state in addition to host membership.

D:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Its verification is distinct from the reported condition: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The team should test joins and forwarding separately.

Question 736

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: Isolated private VLAN endpoints can reach neither each other nor the legitimate default gateway. The proposed behavior must be validated on actual switching ports. What is the most likely design-related cause?

  1. Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances.
  2. Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN.
  3. Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity.
  4. Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit.

Explanation

Correct Answer

D:

For a data-center access fabric using tagged trunks, the governing mechanism is: Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. It explains the reported symptom: Isolated private VLAN endpoints can reach neither each other nor the legitimate default gateway. The intended response is: Configure the gateway-facing port with proper promiscuous association for the private VLAN topology. Verification: Isolated and community hosts reach the shared gateway while tenant-to-tenant restrictions remain.

Incorrect Answers

A:

Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances. This alternative mechanism does not match the current fault.

B:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. Fixing that different mechanism would not address the current root cause: private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit.

C:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. Its verification is distinct from the reported condition: Isolated private VLAN endpoints can reach neither each other nor the legitimate default gateway. The proposed behavior must be validated on actual switching ports.

Question 737

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: Separate PIM-SM rendezvous points cannot discover active multicast sources registered at neighboring RPs. The corrected tree must respect source and group authorization. What important rollout safeguard is most relevant here?

  1. Do not assume MSDP is mandatory for every SSM or every PIM-only Anycast RP design.
  2. Verify unicast routing to the source or RP before expecting successful reverse-path checks.
  3. Avoid running competing unsupported querier configurations without election planning.
  4. Do not interpret (*,G) shared-tree membership as proof that a particular source is forwarding.

Explanation

Correct Answer

A:

For a multimedia training network running Junos multicast routers, the relevant safeguard is: Do not assume MSDP is mandatory for every SSM or every PIM-only Anycast RP design. It matters while implementing: Configure the required MSDP relationships between the intended ASM rendezvous points. The fault involves: Multicast Source Discovery Protocol communicates source-active information between supported RPs. The required acceptance result remains: show msdp source-active shows a known source and receivers on the other RP reach it.

Incorrect Answers

B:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. The appropriate correction for the reported case is: Do not assume MSDP is mandatory for every SSM or every PIM-only Anycast RP design.

C:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Fixing that different mechanism would not address the current root cause: Multicast Source Discovery Protocol communicates source-active information between supported RPs.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: Separate PIM-SM rendezvous points cannot discover active multicast sources registered at neighboring RPs. The corrected tree must respect source and group authorization.

Question 738

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: Two routers connected by one Ethernet segment have mismatched OSPF area assignments and never become neighbors. The correction must not expose administrative network prefixes. What important rollout safeguard is most relevant here?

  1. Do not rely on arbitrary area-to-area links to replace a valid backbone design.
  2. Do not change the backbone area relationship without validating ABR connectivity.
  3. Check bidirectional traffic and backup capacity before adjusting link metrics.
  4. Do not mask a real MTU mismatch with a blanket interoperability workaround without testing traffic.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Do not change the backbone area relationship without validating ABR connectivity. It matters while implementing: Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design. The fault involves: OSPF neighbors on a common link must agree on the area identifier used in Hello processing. The required acceptance result remains: The peers reach Full state and show ospf interface reports the planned area on both sides.

Incorrect Answers

A:

OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. The appropriate correction for the reported case is: Do not change the backbone area relationship without validating ABR connectivity.

C:

OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. Fixing that different mechanism would not address the current root cause: OSPF neighbors on a common link must agree on the area identifier used in Hello processing.

D:

Database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link. Its verification is distinct from the reported condition: Two routers connected by one Ethernet segment have mismatched OSPF area assignments and never become neighbors. The correction must not expose administrative network prefixes.

Question 739

At a corporate campus enforcing wired network access, a Junos specialist investigates this scenario: A guest must accept access conditions in a browser before reaching a limited public LAN. Unknown endpoints must not gain access to protected internal VLANs. For which use case is this feature the best match?

  1. Use a reject VLAN to distinguish failed authentication from nonresponsive guest devices.
  2. Use ordered multi-method access authentication for mixed enterprise endpoints.
  3. Use captive portals for browser-based guest authentication when supported.
  4. Use 802.1X port-based authentication for credential-aware enterprise clients.

Explanation

Correct Answer

C:

For a corporate campus enforcing wired network access, this mechanism fits the requirement: Use captive portals for browser-based guest authentication when supported. The design is appropriate because: Captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow. In this scenario, the observed issue is: A guest must accept access conditions in a browser before reaching a limited public LAN. The corresponding implementation is: Configure supported captive-portal access and browser redirection with suitable authentication infrastructure.

Incorrect Answers

A:

A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. The appropriate correction for the reported case is: Configure supported captive-portal access and browser redirection with suitable authentication infrastructure.

B:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. Fixing that different mechanism would not address the current root cause: captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow.

D:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Its verification is distinct from the reported condition: A guest must accept access conditions in a browser before reaching a limited public LAN. Unknown endpoints must not gain access to protected internal VLANs.

Question 740

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A new ASM sender transmits but remote receivers never learn about the source through their RP. The change must preserve source identity and avoid multicast loops. What protocol behavior accounts for this failure?

  1. PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges.
  2. Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance.
  3. (S,G) multicast state identifies one particular source S and destination group G.
  4. In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP.

Explanation

Correct Answer

D:

For a live-event venue using routed multicast streaming, the governing mechanism is: In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. It explains the reported symptom: A new ASM sender transmits but remote receivers never learn about the source through their RP. The intended response is: Verify source-facing PIM DR behavior and reachability to the correct rendezvous point. Verification: The RP learns the source and joined downstream receivers begin receiving the stream.

Incorrect Answers

A:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. This alternative mechanism does not match the current fault.

B:

Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. Fixing that different mechanism would not address the current root cause: in PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP.

C:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: A new ASM sender transmits but remote receivers never learn about the source through their RP. The change must preserve source identity and avoid multicast loops.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests