mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 77

Question 760

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An external BGP peering repeatedly fails negotiation because the configured peer AS differs from the neighbor's actual AS. The diagnosis must distinguish a healthy BGP session from eligible received routes. What is the most appropriate correction to implement?

  1. Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified.
  2. Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect.
  3. Configure the approved internal BGP group with correct peer addresses and peer AS membership.
  4. Correct the peer-as setting for the specific external BGP neighbor and recheck the session.

Explanation

Correct Answer

D:

For a managed network team troubleshooting an internet edge, the direct corrective action is: Correct the peer-as setting for the specific external BGP neighbor and recheck the session. This addresses the mechanism: BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Confirm by checking: show BGP neighbor reports Established with the expected external peer AS. During rollout, verify provider documentation and do not broaden peer trust to arbitrary autonomous systems.

Incorrect Answers

A:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. The appropriate correction for the reported case is: Correct the peer-as setting for the specific external BGP neighbor and recheck the session.

B:

BGP depends on a reachable TCP transport path, normally using destination port 179. Fixing that different mechanism would not address the current root cause: BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship.

C:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Its verification is distinct from the reported condition: An external BGP peering repeatedly fails negotiation because the configured peer AS differs from the neighbor's actual AS. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 761

At a branch router serving several application classes, a Junos specialist investigates this scenario: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The team must validate packet drops by actual queue statistics. Which design objective is best served by this mechanism?

  1. Use hierarchical CoS where a shaped WAN rate must be divided among traffic classes.
  2. Use per-queue statistics to diagnose CoS congestion rather than relying on aggregate utilization.
  3. Use multifield CoS classification when packet markings are absent or untrusted.
  4. Use separate forwarding classes to distinguish traffic treatment by business requirements.

Explanation

Correct Answer

A:

For a branch router serving several application classes, this mechanism fits the requirement: Use hierarchical CoS where a shaped WAN rate must be divided among traffic classes. The design is appropriate because: Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. In this scenario, the observed issue is: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The corresponding implementation is: Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy.

Incorrect Answers

B:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. The appropriate correction for the reported case is: Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy.

C:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Fixing that different mechanism would not address the current root cause: Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported.

D:

Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. Its verification is distinct from the reported condition: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The team must validate packet drops by actual queue statistics.

Question 762

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: Trunk links lack a recently introduced VLAN because the team expects dynamic VLAN registration without enabling a registration mechanism. The intended segmentation and loop prevention must remain intact. Which response best restores the intended behavior?

  1. Configure the gateway-facing port with proper promiscuous association for the private VLAN topology.
  2. Enable supported MVRP on intended links and validate the dynamically registered VLAN membership.
  3. Configure the required VLAN members on both ends of the tagged trunk.
  4. Configure supported VSTP membership and root priorities for the chosen VLANs.

Explanation

Correct Answer

B:

For a campus network built with Juniper EX switches, the direct corrective action is: Enable supported MVRP on intended links and validate the dynamically registered VLAN membership. This addresses the mechanism: Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. Confirm by checking: Both participating switches learn the correct registered VLAN and forward its traffic. During rollout, check MVRP support and trunk trust before propagating new VLANs across the network.

Incorrect Answers

A:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. The appropriate correction for the reported case is: Enable supported MVRP on intended links and validate the dynamically registered VLAN membership.

C:

An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN. Fixing that different mechanism would not address the current root cause: multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices.

D:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. Its verification is distinct from the reported condition: Trunk links lack a recently introduced VLAN because the team expects dynamic VLAN registration without enabling a registration mechanism. The intended segmentation and loop prevention must remain intact.

Question 763

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: An OSPF-enabled router has a reachable interface but has no adjacency on that subnet. The team must validate neighbor state rather than assume basic IP reachability proves routing. What would demonstrate a successful correction under test?

  1. The expected interarea prefix LSA and remote IPv6 route appear in the intended area.
  2. The link operates with the intended point-to-point adjacency without DR election.
  3. The peer appears in show ospf neighbor and the local interface appears in show ospf interface.
  4. The selected destination shows multiple eligible next hops and traffic load sharing is observable.

Explanation

Correct Answer

C:

For a regional provider operating Junos-based branch routers, the decisive evidence is: The peer appears in show ospf neighbor and the local interface appears in show ospf interface. This validates the action: Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters. Because: OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries. The appropriate correction for the reported case is: Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.

B:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. Fixing that different mechanism would not address the current root cause: OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.

D:

OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior. Its verification is distinct from the reported condition: An OSPF-enabled router has a reachable interface but has no adjacency on that subnet. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 764

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: A downstream user workstation marks backup traffic as high priority and competes with voice in the protected queue. Classification and downstream remarking must not be confused. What verification result should the engineer expect?

  1. Queue statistics show traffic entering different forwarding classes during a congestion test.
  2. Aggregate throughput stays under the circuit limit while class queues meet their intended bandwidth shares.
  3. A representative load shows which class drops packets and the verified correction reduces them.
  4. The workstation's spoofed expedited marking is reset and voice retains the intended priority.

Explanation

Correct Answer

D:

For a financial services network enforcing trusted DSCP markings, the decisive evidence is: The workstation's spoofed expedited marking is reset and voice retains the intended priority. This validates the action: Apply a controlled classifier or policer for untrusted ports while trusting only authorized phone or uplink markings. Because: The ingress trust boundary decides whether external markings should be accepted or reclassified. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. The appropriate correction for the reported case is: Apply a controlled classifier or policer for untrusted ports while trusting only authorized phone or uplink markings.

B:

Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. Fixing that different mechanism would not address the current root cause: the ingress trust boundary decides whether external markings should be accepted or reclassified.

C:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. Its verification is distinct from the reported condition: A downstream user workstation marks backup traffic as high priority and competes with voice in the protected queue. Classification and downstream remarking must not be confused.

Question 765

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The improvement must not starve business traffic. What would demonstrate a successful correction under test?

  1. Packets with the approved DSCP values enter the expected forwarding queues.
  2. A representative phone flow enters the chosen forwarding class while ordinary traffic remains best effort.
  3. A capture and queue counters show tagged priority values mapped to the expected classes.
  4. The workstation's spoofed expedited marking is reset and voice retains the intended priority.

Explanation

Correct Answer

A:

For a campus switch team configuring Junos egress queues, the decisive evidence is: Packets with the approved DSCP values enter the expected forwarding queues. This validates the action: Attach the appropriate DSCP BA classifier to the trusted ingress interface. Because: A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. The appropriate correction for the reported case is: Attach the appropriate DSCP BA classifier to the trusted ingress interface.

C:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. Fixing that different mechanism would not address the current root cause: a behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.

D:

The ingress trust boundary decides whether external markings should be accepted or reclassified. Its verification is distinct from the reported condition: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The improvement must not starve business traffic.

Question 766

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A conferencing application expects an unknown multicast source but engineers require each client to specify a sender IP. The group traffic must reach interested receivers without flooding other locations. For which use case is this feature the best match?

  1. Use scoped IPv6 multicast addresses for one-to-many IPv6 applications.
  2. Use ASM for group delivery when the sending source is not known at join time.
  3. Use PIM sparse mode for receiver-driven multicast path construction.
  4. Use multicast source-group policy to restrict who may deliver group traffic.

Explanation

Correct Answer

B:

For a campus distributing IP video to several buildings, this mechanism fits the requirement: Use ASM for group delivery when the sending source is not known at join time. The design is appropriate because: Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. In this scenario, the observed issue is: A conferencing application expects an unknown multicast source but engineers require each client to specify a sender IP. The corresponding implementation is: Design a suitable ASM group with functioning IGMP membership and rendezvous-point information.

Incorrect Answers

A:

IPv6 multicast destinations begin in the FF00::/8 range and include scope information. The appropriate correction for the reported case is: Design a suitable ASM group with functioning IGMP membership and rendezvous-point information.

C:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Fixing that different mechanism would not address the current root cause: any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism.

D:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Its verification is distinct from the reported condition: A conferencing application expects an unknown multicast source but engineers require each client to specify a sender IP. The group traffic must reach interested receivers without flooding other locations.

Question 767

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: Two equal eligible BGP paths exist but the forwarding table installs only one next hop. The routing policy must retain intended primary and backup paths. What would demonstrate a successful correction under test?

  1. The multi-hop session establishes and uses the intended loopback source and destination.
  2. The neighbor establishes its TCP session and BGP state changes to Established.
  3. The selected route has multiple eligible forwarding next hops and a traffic test uses both paths.
  4. show bgp summary identifies the internal peer in Established state.

Explanation

Correct Answer

C:

For a dual-homed business network peering with two upstream providers, the decisive evidence is: The selected route has multiple eligible forwarding next hops and a traffic test uses both paths. This validates the action: Configure supported multipath and forwarding next-hop behavior for truly equivalent paths. Because: BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. The appropriate correction for the reported case is: Configure supported multipath and forwarding next-hop behavior for truly equivalent paths.

B:

BGP depends on a reachable TCP transport path, normally using destination port 179. Fixing that different mechanism would not address the current root cause: BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support.

D:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Its verification is distinct from the reported condition: Two equal eligible BGP paths exist but the forwarding table installs only one next hop. The routing policy must retain intended primary and backup paths.

Question 768

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: An engineer tries to assign a unicast destination to represent a one-to-many IPv4 video channel. The group traffic must reach interested receivers without flooding other locations. When would the described mechanism be appropriate?

  1. Use source-group entries to trace a single multicast sender's path.
  2. Use multicast source-group policy to restrict who may deliver group traffic.
  3. Use PIM sparse mode for receiver-driven multicast path construction.
  4. Use IPv4 multicast addressing when a sender must distribute the same traffic to many receivers.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, this mechanism fits the requirement: Use IPv4 multicast addressing when a sender must distribute the same traffic to many receivers. The design is appropriate because: IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. In this scenario, the observed issue is: An engineer tries to assign a unicast destination to represent a one-to-many IPv4 video channel. The corresponding implementation is: Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.

Incorrect Answers

A:

(S,G) multicast state identifies one particular source S and destination group G. The appropriate correction for the reported case is: Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.

B:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Fixing that different mechanism would not address the current root cause: IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations.

C:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Its verification is distinct from the reported condition: An engineer tries to assign a unicast destination to represent a one-to-many IPv4 video channel. The group traffic must reach interested receivers without flooding other locations. When would the described mechanism be appropriate.

Question 769

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The overlay must relearn host reachability without stale tunnel selection. What important rollout safeguard is most relevant here?

  1. Verify IRB and route-target configuration and avoid leaking unrelated tenant subnets.
  2. Audit route-target overlap because wrong imports can defeat VLAN and VNI isolation.
  3. Check duplicate MAC and route-target behavior before forcing remote FDB entries.
  4. Avoid accidentally reusing an Ethernet segment identifier for unrelated customer attachments.

Explanation

Correct Answer

A:

For an enterprise migrating virtual machines between racks, the relevant safeguard is: Verify IRB and route-target configuration and avoid leaking unrelated tenant subnets. It matters while implementing: Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets. The fault involves: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. The required acceptance result remains: The remote IP-VRF learns the approved prefix with valid overlay next-hop resolution.

Incorrect Answers

B:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. The appropriate correction for the reported case is: Verify IRB and route-target configuration and avoid leaking unrelated tenant subnets.

C:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Fixing that different mechanism would not address the current root cause: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs.

D:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Its verification is distinct from the reported condition: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The overlay must relearn host reachability without stale tunnel selection.

Question 770

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An iBGP session over loopbacks fails because the outgoing TCP connection uses a physical-interface source address. The diagnosis must distinguish a healthy BGP session from eligible received routes. What is the most likely design-related cause?

  1. Route reflector cluster identifiers participate in loop detection on reflected BGP paths.
  2. Both ends of a loopback-based BGP session must reach and recognize the configured local addresses.
  3. AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection.
  4. BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy.

Explanation

Correct Answer

B:

For a managed network team troubleshooting an internet edge, the governing mechanism is: Both ends of a loopback-based BGP session must reach and recognize the configured local addresses. It explains the reported symptom: An iBGP session over loopbacks fails because the outgoing TCP connection uses a physical-interface source address. The intended response is: Set the BGP local-address to the intended routable loopback and verify remote peer configuration. Verification: show BGP neighbor reports the expected local source and established peer endpoint.

Incorrect Answers

A:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. This alternative mechanism does not match the current fault.

C:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. Fixing that different mechanism would not address the current root cause: both ends of a loopback-based BGP session must reach and recognize the configured local addresses.

D:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Its verification is distinct from the reported condition: An iBGP session over loopbacks fails because the outgoing TCP connection uses a physical-interface source address. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests