mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 73

Question 720

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A Junos switch physical port is configured without suitable Layer 2 logical interface family and VLAN traffic never bridges. The service must preserve tags without bridging unrelated tenants. Which operational result would most clearly confirm the fix?

  1. Maximum expected tagged frames traverse every provider hop without oversize drops.
  2. A loop-free topology has one blocked alternate path that activates after a controlled failure.
  3. Captures show preserved inner customer tags inside the expected outer service tag.
  4. show ethernet-switching interfaces lists the port and correct VLAN context.

Explanation

Correct Answer

D:

For a provider Ethernet network carrying customer Layer 2 services, the decisive evidence is: show ethernet-switching interfaces lists the port and correct VLAN context. This validates the action: Configure the intended ethernet-switching family and interface mode at supported hierarchy. Because: Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. The appropriate correction for the reported case is: Configure the intended ethernet-switching family and interface mode at supported hierarchy.

B:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Fixing that different mechanism would not address the current root cause: junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces.

C:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Its verification is distinct from the reported condition: A Junos switch physical port is configured without suitable Layer 2 logical interface family and VLAN traffic never bridges. The service must preserve tags without bridging unrelated tenants.

Question 721

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The routing change must preserve control-plane consistency across areas. Which underlying distinction should guide troubleshooting?

  1. OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers.
  2. OSPF neighbors on a common link must agree on the area identifier used in Hello processing.
  3. Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully.
  4. Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers.

Explanation

Correct Answer

A:

For a university separating multiple OSPF areas, the governing mechanism is: OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. It explains the reported symptom: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The intended response is: Connect the appropriate area border routers to area 0 and repair the multi-area topology. Verification: Interarea routes appear in expected areas with valid backbone reachability.

Incorrect Answers

B:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. This alternative mechanism does not match the current fault.

C:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Fixing that different mechanism would not address the current root cause: OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers.

D:

Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. Its verification is distinct from the reported condition: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The routing change must preserve control-plane consistency across areas.

Question 722

At a hospital onboarding diverse employee devices, a Junos specialist investigates this scenario: An unmanaged visitor device does not answer 802.1X challenges yet should reach a limited onboarding network. Critical permitted endpoints need a documented authentication fallback. Which response best restores the intended behavior?

  1. Configure supported server-reject access behavior and a restricted reject VLAN policy.
  2. Configure supported guest VLAN behavior and its restricted connectivity policy on the access port.
  3. Set an explicit supported fallback policy and test a simulated RADIUS timeout.
  4. Inspect and configure the supported 802.1X then MAC RADIUS then portal method order for that port.

Explanation

Correct Answer

B:

For a hospital onboarding diverse employee devices, the direct corrective action is: Configure supported guest VLAN behavior and its restricted connectivity policy on the access port. This addresses the mechanism: A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Confirm by checking: The unauthenticated nonresponsive test client reaches only the approved onboarding services. During rollout, do not assume a wrong-password response triggers the same behavior as complete nonresponse.

Incorrect Answers

A:

A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. The appropriate correction for the reported case is: Configure supported guest VLAN behavior and its restricted connectivity policy on the access port.

C:

Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. Fixing that different mechanism would not address the current root cause: a guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it.

D:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. Its verification is distinct from the reported condition: An unmanaged visitor device does not answer 802.1X challenges yet should reach a limited onboarding network. Critical permitted endpoints need a documented authentication fallback.

Question 723

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: An isolated receiver VLAN stops forwarding multicast after a period because host membership information expires. The change must preserve source identity and avoid multicast loops. Which technical mechanism most directly explains the symptom?

  1. Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance.
  2. IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN.
  3. IGMP membership maintenance relies on periodic queries from a suitable multicast querier.
  4. IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations.

Explanation

Correct Answer

C:

For a live-event venue using routed multicast streaming, the governing mechanism is: IGMP membership maintenance relies on periodic queries from a suitable multicast querier. It explains the reported symptom: An isolated receiver VLAN stops forwarding multicast after a period because host membership information expires. The intended response is: Provide an approved IGMP querier or routed multicast interface for the VLAN. Verification: Group memberships persist across query intervals while idle receivers age out as intended.

Incorrect Answers

A:

Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. This alternative mechanism does not match the current fault.

B:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Fixing that different mechanism would not address the current root cause: IGMP membership maintenance relies on periodic queries from a suitable multicast querier.

D:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Its verification is distinct from the reported condition: An isolated receiver VLAN stops forwarding multicast after a period because host membership information expires. The change must preserve source identity and avoid multicast loops.

Question 724

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: A circuit works for short frames but drops full-size customer frames after stacked VLAN tagging is enabled. The change must retain both link resilience and correct VLAN isolation. What is the most appropriate correction to implement?

  1. Configure supported provider bridging with a distinct service tag for each tenant context.
  2. Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN.
  3. Enable supported MVRP on intended links and validate the dynamically registered VLAN membership.
  4. Increase supported link MTU consistently or adjust customer frame limits where required.

Explanation

Correct Answer

D:

For a large enterprise updating redundant switch links, the direct corrective action is: Increase supported link MTU consistently or adjust customer frame limits where required. This addresses the mechanism: Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Confirm by checking: Maximum expected tagged frames traverse every provider hop without oversize drops. During rollout, check all intermediary devices rather than changing only the ingress port.

Incorrect Answers

A:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. The appropriate correction for the reported case is: Increase supported link MTU consistently or adjust customer frame limits where required.

B:

Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. Fixing that different mechanism would not address the current root cause: adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU.

C:

Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. Its verification is distinct from the reported condition: A circuit works for short frames but drops full-size customer frames after stacked VLAN tagging is enabled. The change must retain both link resilience and correct VLAN isolation.

Question 725

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: Traffic is internally classified correctly but leaves the site with DSCP markings that an upstream provider does not recognize. Classification and downstream remarking must not be confused. Which response best restores the intended behavior?

  1. Apply a supported DSCP rewrite rule on the designated egress interface.
  2. Apply a suitable RED or weighted drop profile through the appropriate scheduler.
  3. Attach the appropriate DSCP BA classifier to the trusted ingress interface.
  4. Apply an appropriate IEEE 802.1p classifier on the trusted tagged ingress port.

Explanation

Correct Answer

A:

For a financial services network enforcing trusted DSCP markings, the direct corrective action is: Apply a supported DSCP rewrite rule on the designated egress interface. This addresses the mechanism: Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. Confirm by checking: Packet captures on egress show the agreed DSCP values for representative classes. During rollout, check carrier QoS agreements and do not remark traffic to privileged codepoints without approval.

Incorrect Answers

B:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. The appropriate correction for the reported case is: Apply a supported DSCP rewrite rule on the designated egress interface.

C:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Fixing that different mechanism would not address the current root cause: junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints.

D:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. Its verification is distinct from the reported condition: Traffic is internally classified correctly but leaves the site with DSCP markings that an upstream provider does not recognize. Classification and downstream remarking must not be confused.

Question 726

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: Two VLANs need different active Layer 2 paths but use one common spanning-tree root everywhere. The intended segmentation and loop prevention must remain intact. Which observation proves this requirement has been satisfied?

  1. show ethernet-switching table contains the expected MAC-to-port entry and forwarding becomes selective.
  2. Each VLAN shows the intended root and blocked ports without creating a loop.
  3. show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet.
  4. Matching test traffic enters the designated VLAN while nonmatching traffic follows default handling.

Explanation

Correct Answer

B:

For a campus network built with Juniper EX switches, the decisive evidence is: Each VLAN shows the intended root and blocked ports without creating a loop. This validates the action: Configure supported VSTP membership and root priorities for the chosen VLANs. Because: VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. The appropriate correction for the reported case is: Configure supported VSTP membership and root priorities for the chosen VLANs.

C:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots.

D:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. Its verification is distinct from the reported condition: Two VLANs need different active Layer 2 paths but use one common spanning-tree root everywhere. The intended segmentation and loop prevention must remain intact.

Question 727

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: Two candidate BGP paths are comparable in earlier attributes but one was learned via eBGP and the other iBGP. The routing policy must retain intended primary and backup paths. Which operational change most directly resolves the observed failure?

  1. Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix.
  2. Configure supported multipath and forwarding next-hop behavior for truly equivalent paths.
  3. Review peer type and the complete path decision chain before adjusting selection policy.
  4. Correct the peer-as setting for the specific external BGP neighbor and recheck the session.

Explanation

Correct Answer

C:

For a dual-homed business network peering with two upstream providers, the direct corrective action is: Review peer type and the complete path decision chain before adjusting selection policy. This addresses the mechanism: Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. Confirm by checking: The active BGP path reflects eBGP preference only when earlier criteria do not decide first. During rollout, do not confuse eBGP-versus-iBGP tie breaking with global Junos route preference.

Incorrect Answers

A:

Hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection. The appropriate correction for the reported case is: Review peer type and the complete path decision chain before adjusting selection policy.

B:

BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. Fixing that different mechanism would not address the current root cause: junos BGP best-path logic generally prefers the external route when preceding comparisons tie.

D:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Its verification is distinct from the reported condition: Two candidate BGP paths are comparable in earlier attributes but one was learned via eBGP and the other iBGP. The routing policy must retain intended primary and backup paths.

Question 728

At a branch router serving several application classes, a Junos specialist investigates this scenario: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The team must validate packet drops by actual queue statistics. What important rollout safeguard is most relevant here?

  1. Control priority traffic volume to avoid starving all other egress queues.
  2. Avoid assigning every flow to strict priority because it can starve other services.
  3. Check both classification and rewrite stages because they solve different problems.
  4. Do not treat packet-loss priority as a substitute for guaranteed bandwidth or physical capacity.

Explanation

Correct Answer

D:

For a branch router serving several application classes, the relevant safeguard is: Do not treat packet-loss priority as a substitute for guaranteed bandwidth or physical capacity. It matters while implementing: Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification. The fault involves: Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. The required acceptance result remains: Under load the less-important traffic experiences expected earlier drops while protected traffic is retained.

Incorrect Answers

A:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. The appropriate correction for the reported case is: Do not treat packet-loss priority as a substitute for guaranteed bandwidth or physical capacity.

B:

Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. Fixing that different mechanism would not address the current root cause: junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure.

C:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Its verification is distinct from the reported condition: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The team must validate packet drops by actual queue statistics.

Question 729

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: Two multicast routers share a source LAN and operators cannot determine which device registers a new ASM source. The group traffic must reach interested receivers without flooding other locations. What is the most likely design-related cause?

  1. PIM designated-router election selects the local router responsible for certain first-hop PIM functions.
  2. IPv6 multicast destinations begin in the FF00::/8 range and include scope information.
  3. PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain.
  4. IGMPv3 membership records can identify source filters that enable explicit SSM interest.

Explanation

Correct Answer

A:

For a campus distributing IP video to several buildings, the governing mechanism is: PIM designated-router election selects the local router responsible for certain first-hop PIM functions. It explains the reported symptom: Two multicast routers share a source LAN and operators cannot determine which device registers a new ASM source. The intended response is: Confirm neighbor priorities and configured DR role on the shared segment. Verification: The expected DR handles source registration and state transitions during controlled failover.

Incorrect Answers

B:

IPv6 multicast destinations begin in the FF00::/8 range and include scope information. This alternative mechanism does not match the current fault.

C:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. Fixing that different mechanism would not address the current root cause: PIM designated-router election selects the local router responsible for certain first-hop PIM functions.

D:

IGMPv3 membership records can identify source filters that enable explicit SSM interest. Its verification is distinct from the reported condition: Two multicast routers share a source LAN and operators cannot determine which device registers a new ASM source. The group traffic must reach interested receivers without flooding other locations.

Question 730

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The intended segmentation and loop prevention must remain intact. What protocol behavior accounts for this failure?

  1. Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain.
  2. A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate.
  3. Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN.
  4. IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.

Explanation

Correct Answer

B:

For a campus network built with Juniper EX switches, the governing mechanism is: A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate. It explains the reported symptom: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The intended response is: Assign distinct outer service VLAN identities to the independent customer services. Verification: Captures show identical inner tags transported only within their intended outer service VLANs.

Incorrect Answers

A:

Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. This alternative mechanism does not match the current fault.

C:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. Fixing that different mechanism would not address the current root cause: a provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate.

D:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Its verification is distinct from the reported condition: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The intended segmentation and loop prevention must remain intact.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests