mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 72

Question 710

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The proposed behavior must be validated on actual switching ports. Which response best restores the intended behavior?

  1. Inspect boundary-port roles and configure supported interoperation at the domain edge.
  2. Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN.
  3. Configure supported provider bridging with a distinct service tag for each tenant context.
  4. Configure supported VSTP membership and root priorities for the chosen VLANs.

Explanation

Correct Answer

B:

For a data-center access fabric using tagged trunks, the direct corrective action is: Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN. This addresses the mechanism: Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. Confirm by checking: Customer control frames arrive at the remote customer edge without altering provider bridge state. During rollout, constrain tunneling to approved protocols and monitor control-plane traffic rate.

Incorrect Answers

A:

MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. The appropriate correction for the reported case is: Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN.

C:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Fixing that different mechanism would not address the current root cause: layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain.

D:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. Its verification is distinct from the reported condition: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The proposed behavior must be validated on actual switching ports.

Question 711

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: An OSPFv3 ABR has an IPv6 subnet internally but other areas never learn the prefix. The internal forwarding path must remain stable when one uplink fails. Which response best restores the intended behavior?

  1. Configure a supported OSPF point-to-point network type consistently on the dedicated link.
  2. Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design.
  3. Check ABR area topology and permitted interarea prefix advertisement for the missing network.
  4. Configure the intended OSPFv3 area and IPv6-enabled link interfaces on both peers.

Explanation

Correct Answer

C:

For a national enterprise designing OSPF between offices, the direct corrective action is: Check ABR area topology and permitted interarea prefix advertisement for the missing network. This addresses the mechanism: OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries. Confirm by checking: The expected interarea prefix LSA and remote IPv6 route appear in the intended area. During rollout, avoid applying IPv4 OSPF LSA type assumptions to OSPFv3 packet formats.

Incorrect Answers

A:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. The appropriate correction for the reported case is: Check ABR area topology and permitted interarea prefix advertisement for the missing network.

B:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Fixing that different mechanism would not address the current root cause: OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries.

D:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Its verification is distinct from the reported condition: An OSPFv3 ABR has an IPv6 subnet internally but other areas never learn the prefix. The internal forwarding path must remain stable when one uplink fails.

Question 712

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A route filter intended to allow a single aggregate accidentally accepts many more-specific customer prefixes. The routing policy must retain intended primary and backup paths. What would demonstrate a successful correction under test?

  1. An intentionally unstable test route shows expected damping and eventual reuse after stability.
  2. Accepted routes appear in the BGP route table and unwanted routes are rejected or hidden as intended.
  3. A bounded test demonstrates alerting or session protection when the accepted limit is exceeded.
  4. Only intended prefix lengths pass the import or export policy.

Explanation

Correct Answer

D:

For a dual-homed business network peering with two upstream providers, the decisive evidence is: Only intended prefix lengths pass the import or export policy. This validates the action: Choose exact or bounded prefix-length matching appropriate to the advertisement contract. Because: Junos route filters distinguish exact matching from longer or longer-prefix patterns. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. The appropriate correction for the reported case is: Choose exact or bounded prefix-length matching appropriate to the advertisement contract.

B:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. Fixing that different mechanism would not address the current root cause: junos route filters distinguish exact matching from longer or longer-prefix patterns.

C:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Its verification is distinct from the reported condition: A route filter intended to allow a single aggregate accidentally accepts many more-specific customer prefixes. The routing policy must retain intended primary and backup paths.

Question 713

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A neighbor mistakenly announces hundreds of thousands of unexpected routes and threatens routing memory. The chosen route must have a valid data-plane next hop. Which configuration adjustment should be made first to address this issue?

  1. Configure reasonable warning and hard limits appropriate to each authorized address family.
  2. Choose exact or bounded prefix-length matching appropriate to the advertisement contract.
  3. Enable the authorized inet6-unicast family consistently at relevant BGP group or peer scope.
  4. Inspect the origin attribute and apply policy only if the intended path requires explicit adjustment.

Explanation

Correct Answer

A:

For an enterprise core exchanging BGP routes over redundant WAN paths, the direct corrective action is: Configure reasonable warning and hard limits appropriate to each authorized address family. This addresses the mechanism: A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Confirm by checking: A bounded test demonstrates alerting or session protection when the accepted limit is exceeded. During rollout, base limits on planned growth and supportable recovery actions rather than an arbitrary tiny threshold.

Incorrect Answers

B:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. The appropriate correction for the reported case is: Configure reasonable warning and hard limits appropriate to each authorized address family.

C:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Fixing that different mechanism would not address the current root cause: a BGP prefix-limit control detects or constrains excessive received NLRI from a peer.

D:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. Its verification is distinct from the reported condition: A neighbor mistakenly announces hundreds of thousands of unexpected routes and threatens routing memory. The chosen route must have a valid data-plane next hop.

Question 714

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: A team treats a two-way neighbor state as a complete adjacency on every network type. The internal forwarding path must remain stable when one uplink fails. Which operational change most directly resolves the observed failure?

  1. Correct the relevant link MTU on both endpoints and restart adjacency safely if necessary.
  2. Read network type and DR/BDR election results when interpreting show ospf neighbor.
  3. Enable limited OSPF traceoptions with bounded logging, capture the failure and remove them afterward.
  4. Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design.

Explanation

Correct Answer

B:

For a national enterprise designing OSPF between offices, the direct corrective action is: Read network type and DR/BDR election results when interpreting show ospf neighbor. This addresses the mechanism: OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. Confirm by checking: Expected transit adjacencies reach Full while eligible non-DR neighbors may remain TwoWay. During rollout, do not reset stable adjacencies merely because a non-DR neighbor is TwoWay on broadcast media.

Incorrect Answers

A:

Database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link. The appropriate correction for the reported case is: Read network type and DR/BDR election results when interpreting show ospf neighbor.

C:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Fixing that different mechanism would not address the current root cause: OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full.

D:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Its verification is distinct from the reported condition: A team treats a two-way neighbor state as a complete adjacency on every network type. The internal forwarding path must remain stable when one uplink fails.

Question 715

At a school building a restricted guest onboarding network, a Junos specialist investigates this scenario: A RADIUS server outage causes all access switches to block critical devices with no approved fallback behavior. Only approved identities may enter privileged enterprise segments. Which configuration adjustment should be made first to address this issue?

  1. Inspect and configure the supported 802.1X then MAC RADIUS then portal method order for that port.
  2. Verify switch-side RADIUS connectivity and authenticator configuration rather than redirecting the client to the server.
  3. Set an explicit supported fallback policy and test a simulated RADIUS timeout.
  4. Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity.

Explanation

Correct Answer

C:

For a school building a restricted guest onboarding network, the direct corrective action is: Set an explicit supported fallback policy and test a simulated RADIUS timeout. This addresses the mechanism: Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. Confirm by checking: Existing and new devices follow the approved fallback behavior while the server is unreachable. During rollout, do not confuse a server timeout with an explicit Access-Reject or permit a broad uncontrolled bypass.

Incorrect Answers

A:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. The appropriate correction for the reported case is: Set an explicit supported fallback policy and test a simulated RADIUS timeout.

B:

In common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server. Fixing that different mechanism would not address the current root cause: server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable.

D:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. Its verification is distinct from the reported condition: A RADIUS server outage causes all access switches to block critical devices with no approved fallback behavior. Only approved identities may enter privileged enterprise segments.

Question 716

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: Two routers in the same enterprise AS exchange IP reachability but their intended iBGP session never establishes. The routing policy must retain intended primary and backup paths. Which limitation should guide the change control?

  1. Verify community propagation scope and avoid accepting arbitrary peer tags as trusted authorization.
  2. Check family mismatches before changing general session hold timers.
  3. Coordinate secret rotations to avoid synchronized loss of redundant sessions.
  4. Validate route reachability to the peer loopback before changing route policy.

Explanation

Correct Answer

D:

For a dual-homed business network peering with two upstream providers, the relevant safeguard is: Validate route reachability to the peer loopback before changing route policy. It matters while implementing: Configure the approved internal BGP group with correct peer addresses and peer AS membership. The fault involves: iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. The required acceptance result remains: show BGP summary identifies the internal peer in Established state.

Incorrect Answers

A:

BGP community attributes carry policy tags that importing or exporting routers can match. The appropriate correction for the reported case is: Validate route reachability to the peer loopback before changing route policy.

B:

BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. Fixing that different mechanism would not address the current root cause: iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses.

C:

Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. Its verification is distinct from the reported condition: Two routers in the same enterprise AS exchange IP reachability but their intended iBGP session never establishes. The routing policy must retain intended primary and backup paths.

Question 717

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A campus multicast application leaks into an intersite link where the traffic is not permitted. The change must preserve source identity and avoid multicast loops. Which response best restores the intended behavior?

  1. Apply explicit multicast scope or PIM routing policy at the relevant domain boundary.
  2. Confirm neighbor priorities and configured DR role on the shared segment.
  3. Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.
  4. Inspect the source and group state to diagnose the correct sender-specific distribution tree.

Explanation

Correct Answer

A:

For a live-event venue using routed multicast streaming, the direct corrective action is: Apply explicit multicast scope or PIM routing policy at the relevant domain boundary. This addresses the mechanism: Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Confirm by checking: An allowed test group crosses the boundary while a restricted group does not. During rollout, apply policy to all alternate paths, not just the primary router, to avoid bypass after failover.

Incorrect Answers

B:

PIM designated-router election selects the local router responsible for certain first-hop PIM functions. The appropriate correction for the reported case is: Apply explicit multicast scope or PIM routing policy at the relevant domain boundary.

C:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Fixing that different mechanism would not address the current root cause: multicast group and routing policies can limit which group ranges and sources cross specified boundaries.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: A campus multicast application leaks into an intersite link where the traffic is not permitted. The change must preserve source identity and avoid multicast loops.

Question 718

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: A dual-homed Ethernet segment loses reachability after one attached PE fails because remote devices lack proper multihoming state. The tenant traffic must remain isolated across the overlay. Which operational result would most clearly confirm the fix?

  1. Each PE sees its expected remote multihoming peers and a consistent segment identity.
  2. Remote PEs update reachability promptly when the attached PE withdraws its Ethernet segment route.
  3. Remote VTEPs have the expected BUM distribution list and ARP broadcast traffic arrives.
  4. A remote EVPN MAC table resolves the host to the expected originating VTEP.

Explanation

Correct Answer

B:

For a Junos EVPN-VXLAN leaf-spine fabric, the decisive evidence is: Remote PEs update reachability promptly when the attached PE withdraws its Ethernet segment route. This validates the action: Validate the Ethernet A-D advertisements and intended multihoming failover configuration. Because: EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. The appropriate correction for the reported case is: Validate the Ethernet A-D advertisements and intended multihoming failover configuration.

C:

EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership. Fixing that different mechanism would not address the current root cause: EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior.

D:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Its verification is distinct from the reported condition: A dual-homed Ethernet segment loses reachability after one attached PE fails because remote devices lack proper multihoming state. The tenant traffic must remain isolated across the overlay.

Question 719

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A route is absent from the active table even though BGP packet counters show received updates. The change must not introduce an unwanted autonomous-system route leak. What is the most appropriate correction to implement?

  1. Apply a narrowly matched export policy for intended prefixes to the relevant BGP group.
  2. Deploy supported route-reflector clusters and designate approved clients with appropriate topology.
  3. Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix.
  4. Apply approved next-hop self behavior at the correct iBGP advertisement boundary.

Explanation

Correct Answer

C:

For a large organization using Junos route reflectors, the direct corrective action is: Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix. This addresses the mechanism: Hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection. Confirm by checking: The reason for exclusion is identified and a corrected route becomes eligible without collateral changes. During rollout, do not treat a neighbor's Established state as proof that its prefixes were accepted.

Incorrect Answers

A:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. The appropriate correction for the reported case is: Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix.

B:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection.

D:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Its verification is distinct from the reported condition: A route is absent from the active table even though BGP packet counters show received updates. The change must not introduce an unwanted autonomous-system route leak.

Question 720

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A Junos switch physical port is configured without suitable Layer 2 logical interface family and VLAN traffic never bridges. The service must preserve tags without bridging unrelated tenants. Which operational result would most clearly confirm the fix?

  1. Maximum expected tagged frames traverse every provider hop without oversize drops.
  2. A loop-free topology has one blocked alternate path that activates after a controlled failure.
  3. Captures show preserved inner customer tags inside the expected outer service tag.
  4. show ethernet-switching interfaces lists the port and correct VLAN context.

Explanation

Correct Answer

D:

For a provider Ethernet network carrying customer Layer 2 services, the decisive evidence is: show ethernet-switching interfaces lists the port and correct VLAN context. This validates the action: Configure the intended ethernet-switching family and interface mode at supported hierarchy. Because: Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. The appropriate correction for the reported case is: Configure the intended ethernet-switching family and interface mode at supported hierarchy.

B:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Fixing that different mechanism would not address the current root cause: junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces.

C:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Its verification is distinct from the reported condition: A Junos switch physical port is configured without suitable Layer 2 logical interface family and VLAN traffic never bridges. The service must preserve tags without bridging unrelated tenants.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests