mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 71

Question 700

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: Multicast packets never cross an inter-router link and no PIM adjacency appears although IP unicast works. The corrected tree must respect source and group authorization. Which observation proves this requirement has been satisfied?

  1. Only joined receiver ports receive the test multicast frames during stable operation.
  2. The RP learns the source and joined downstream receivers begin receiving the stream.
  3. Approved stream sources deliver while unauthorized source traffic does not build usable state.
  4. show pim neighbors lists the expected adjacent router on the planned interface.

Explanation

Correct Answer

D:

For a multimedia training network running Junos multicast routers, the decisive evidence is: show pim neighbors lists the expected adjacent router on the planned interface. This validates the action: Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic. Because: PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. The appropriate correction for the reported case is: Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic.

B:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. Fixing that different mechanism would not address the current root cause: PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges.

C:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Its verification is distinct from the reported condition: Multicast packets never cross an inter-router link and no PIM adjacency appears although IP unicast works. The corrected tree must respect source and group authorization.

Question 701

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The corrected tree must respect source and group authorization. For which use case is this feature the best match?

  1. Use IGMPv3 INCLUDE source lists for IPv4 source-specific multicast receiver membership.
  2. Use IGMP snooping to constrain Layer 2 multicast distribution to interested ports.
  3. Use PIM sparse mode for receiver-driven multicast path construction.
  4. Use source-group entries to trace a single multicast sender's path.

Explanation

Correct Answer

A:

For a multimedia training network running Junos multicast routers, this mechanism fits the requirement: Use IGMPv3 INCLUDE source lists for IPv4 source-specific multicast receiver membership. The design is appropriate because: IGMPv3 membership records can identify source filters that enable explicit SSM interest. In this scenario, the observed issue is: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The corresponding implementation is: Enable supported IGMPv3 processing and make hosts join the approved source-group pair.

Incorrect Answers

B:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. The appropriate correction for the reported case is: Enable supported IGMPv3 processing and make hosts join the approved source-group pair.

C:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Fixing that different mechanism would not address the current root cause: IGMPv3 membership records can identify source filters that enable explicit SSM interest.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The corrected tree must respect source and group authorization.

Question 702

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: A switch places latency-sensitive voice frames and bulk backups into the same egress queue despite different treatment requirements. The network must keep critical application latency within policy. What risk must the implementation avoid?

  1. Check both classification and rewrite stages because they solve different problems.
  2. Avoid assigning every flow to strict priority because it can starve other services.
  3. Do not treat packet-loss priority as a substitute for guaranteed bandwidth or physical capacity.
  4. Do not trust arbitrary endpoint DSCP values simply because a VLAN tag is present.

Explanation

Correct Answer

B:

For a congested enterprise WAN carrying video, voice and backups, the relevant safeguard is: Avoid assigning every flow to strict priority because it can starve other services. It matters while implementing: Map approved voice traffic to an appropriate expedited-forwarding class and backups to a suitable lower class. The fault involves: Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. The required acceptance result remains: Queue statistics show traffic entering different forwarding classes during a congestion test.

Incorrect Answers

A:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. The appropriate correction for the reported case is: Avoid assigning every flow to strict priority because it can starve other services.

C:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. Fixing that different mechanism would not address the current root cause: Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior.

D:

The ingress trust boundary decides whether external markings should be accepted or reclassified. Its verification is distinct from the reported condition: A switch places latency-sensitive voice frames and bulk backups into the same egress queue despite different treatment requirements. The network must keep critical application latency within policy.

Question 703

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The chosen route must have a valid data-plane next hop. Which underlying distinction should guide troubleshooting?

  1. BGP export policy controls which eligible active routes the speaker announces to selected neighbors.
  2. BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions.
  3. A BGP import policy determines which incoming route advertisements are accepted into the routing table.
  4. Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules.

Explanation

Correct Answer

C:

For an enterprise core exchanging BGP routes over redundant WAN paths, the governing mechanism is: A BGP import policy determines which incoming route advertisements are accepted into the routing table. It explains the reported symptom: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The intended response is: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones. Verification: Accepted routes appear in the BGP route table and unwanted routes are rejected or hidden as intended.

Incorrect Answers

A:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. This alternative mechanism does not match the current fault.

B:

BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. Fixing that different mechanism would not address the current root cause: a BGP import policy determines which incoming route advertisements are accepted into the routing table.

D:

Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. Its verification is distinct from the reported condition: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The chosen route must have a valid data-plane next hop.

Question 704

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: Many ASM receivers depend on one RP and lose initial source discovery after that device fails. The team should test joins and forwarding separately. What is the most likely design-related cause?

  1. PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain.
  2. In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP.
  3. IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations.
  4. Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance.

Explanation

Correct Answer

D:

For an enterprise telemetry network with multicast subscribers, the governing mechanism is: Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. It explains the reported symptom: Many ASM receivers depend on one RP and lose initial source discovery after that device fails. The intended response is: Deploy supported anycast RP members with the necessary source-state exchange mechanism. Verification: After one RP fails, new group joins reach the surviving RP and active sources remain discoverable.

Incorrect Answers

A:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. This alternative mechanism does not match the current fault.

B:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. Fixing that different mechanism would not address the current root cause: anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance.

C:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Its verification is distinct from the reported condition: Many ASM receivers depend on one RP and lose initial source discovery after that device fails. The team should test joins and forwarding separately.

Question 705

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A switch's MSTP region connects to a different spanning-tree domain and path selection behaves unexpectedly. The proposed behavior must be validated on actual switching ports. Which technical mechanism most directly explains the symptom?

  1. MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior.
  2. MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest.
  3. Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states.
  4. Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables.

Explanation

Correct Answer

A:

For a data-center access fabric using tagged trunks, the governing mechanism is: MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. It explains the reported symptom: A switch's MSTP region connects to a different spanning-tree domain and path selection behaves unexpectedly. The intended response is: Inspect boundary-port roles and configure supported interoperation at the domain edge. Verification: Root and port states remain stable on both sides during controlled link transitions.

Incorrect Answers

B:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. This alternative mechanism does not match the current fault.

C:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Fixing that different mechanism would not address the current root cause: MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior.

D:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. Its verification is distinct from the reported condition: A switch's MSTP region connects to a different spanning-tree domain and path selection behaves unexpectedly. The proposed behavior must be validated on actual switching ports.

Question 706

At a medical facility deploying high-power conference phones, a Junos specialist investigates this scenario: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The phone network must retain appropriate VLAN and voice QoS treatment. What is the most appropriate correction to implement?

  1. Configure the intended voice VLAN and data VLAN relationship on the shared access connection.
  2. Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic.
  3. Check LLDP-MED power negotiation and available power on the phone's switch interface.
  4. Enable supported LLDP on authorized interfaces and inspect neighbor information.

Explanation

Correct Answer

B:

For a medical facility deploying high-power conference phones, the direct corrective action is: Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic. This addresses the mechanism: Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. Confirm by checking: Phone packets receive intended priority during congestion and desktop traffic cannot impersonate it. During rollout, do not blindly trust DSCP or 802.1p markings from untrusted downstream computers.

Incorrect Answers

A:

A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. The appropriate correction for the reported case is: Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic.

C:

Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. Fixing that different mechanism would not address the current root cause: voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment.

D:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Its verification is distinct from the reported condition: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The phone network must retain appropriate VLAN and voice QoS treatment.

Question 707

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: A remote VTEP cannot locate a host MAC in another VXLAN segment even though the BGP EVPN session is established. The overlay must relearn host reachability without stale tunnel selection. Which limitation should guide the change control?

  1. Verify platform and release-specific EVPN support rather than enabling every address family indiscriminately.
  2. Validate election stability on failover to avoid a transient dual-forwarding storm.
  3. Check duplicate MAC and route-target behavior before forcing remote FDB entries.
  4. Verify IRB and route-target configuration and avoid leaking unrelated tenant subnets.

Explanation

Correct Answer

C:

For an enterprise migrating virtual machines between racks, the relevant safeguard is: Check duplicate MAC and route-target behavior before forcing remote FDB entries. It matters while implementing: Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance. The fault involves: EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. The required acceptance result remains: A remote EVPN MAC table resolves the host to the expected originating VTEP.

Incorrect Answers

A:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. The appropriate correction for the reported case is: Check duplicate MAC and route-target behavior before forcing remote FDB entries.

B:

EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments. Fixing that different mechanism would not address the current root cause: EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.

D:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Its verification is distinct from the reported condition: A remote VTEP cannot locate a host MAC in another VXLAN segment even though the BGP EVPN session is established. The overlay must relearn host reachability without stale tunnel selection.

Question 708

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: Two routers on a dedicated Ethernet link are unexpectedly participating in broadcast-network DR election. The internal forwarding path must remain stable when one uplink fails. What risk must the implementation avoid?

  1. Avoid shortening dead timers without checking CPU load and adjacent platform support.
  2. Do not activate the routing protocol on an untrusted or management-facing interface accidentally.
  3. Do not confuse Junos route preference with the BGP LOCAL_PREF attribute.
  4. Verify both ends and vendor interoperability before changing interface type.

Explanation

Correct Answer

D:

For a national enterprise designing OSPF between offices, the relevant safeguard is: Verify both ends and vendor interoperability before changing interface type. It matters while implementing: Configure a supported OSPF point-to-point network type consistently on the dedicated link. The fault involves: OSPF interface network type influences neighbor formation and whether DR and BDR election is used. The required acceptance result remains: The link operates with the intended point-to-point adjacency without DR election.

Incorrect Answers

A:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. The appropriate correction for the reported case is: Verify both ends and vendor interoperability before changing interface type.

B:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Fixing that different mechanism would not address the current root cause: OSPF interface network type influences neighbor formation and whether DR and BDR election is used.

C:

Junos first chooses active routing-table entries using protocol route preference before forwarding installation. Its verification is distinct from the reported condition: Two routers on a dedicated Ethernet link are unexpectedly participating in broadcast-network DR election. The internal forwarding path must remain stable when one uplink fails.

Question 709

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The team should test joins and forwarding separately. What requirement most specifically calls for this approach?

  1. Use PIM sparse mode for receiver-driven multicast path construction.
  2. Use an IGMP querier to maintain receiver state in a multicast VLAN.
  3. Use ASM for group delivery when the sending source is not known at join time.
  4. Use SSM for an application with a known, explicitly selected multicast source.

Explanation

Correct Answer

A:

For an enterprise telemetry network with multicast subscribers, this mechanism fits the requirement: Use PIM sparse mode for receiver-driven multicast path construction. The design is appropriate because: PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. In this scenario, the observed issue is: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The corresponding implementation is: Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling.

Incorrect Answers

B:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. The appropriate correction for the reported case is: Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling.

C:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. Fixing that different mechanism would not address the current root cause: PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere.

D:

Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. Its verification is distinct from the reported condition: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The team should test joins and forwarding separately.

Question 710

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The proposed behavior must be validated on actual switching ports. Which response best restores the intended behavior?

  1. Inspect boundary-port roles and configure supported interoperation at the domain edge.
  2. Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN.
  3. Configure supported provider bridging with a distinct service tag for each tenant context.
  4. Configure supported VSTP membership and root priorities for the chosen VLANs.

Explanation

Correct Answer

B:

For a data-center access fabric using tagged trunks, the direct corrective action is: Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN. This addresses the mechanism: Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. Confirm by checking: Customer control frames arrive at the remote customer edge without altering provider bridge state. During rollout, constrain tunneling to approved protocols and monitor control-plane traffic rate.

Incorrect Answers

A:

MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. The appropriate correction for the reported case is: Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN.

C:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Fixing that different mechanism would not address the current root cause: layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain.

D:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. Its verification is distinct from the reported condition: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The proposed behavior must be validated on actual switching ports.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests