mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 69

Question 680

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The diagnosis must distinguish a healthy BGP session from eligible received routes. Which configuration adjustment should be made first to address this issue?

  1. Inspect the origin attribute and apply policy only if the intended path requires explicit adjustment.
  2. Apply a narrowly matched export policy for intended prefixes to the relevant BGP group.
  3. Configure reasonable warning and hard limits appropriate to each authorized address family.
  4. Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.

Explanation

Correct Answer

D:

For a managed network team troubleshooting an internet edge, the direct corrective action is: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones. This addresses the mechanism: A BGP import policy determines which incoming route advertisements are accepted into the routing table. Confirm by checking: Accepted routes appear in the BGP route table and unwanted routes are rejected or hidden as intended. During rollout, test term ordering and default policy behavior before enabling changes on a production peer.

Incorrect Answers

A:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. The appropriate correction for the reported case is: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.

B:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Fixing that different mechanism would not address the current root cause: a BGP import policy determines which incoming route advertisements are accepted into the routing table.

C:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Its verification is distinct from the reported condition: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 681

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The design must avoid forwarding loops during failover. Which limitation should guide the change control?

  1. Check every underlay hop rather than changing only the leaf switch MTU.
  2. Coordinate access-side LAG and platform semantics before mixing single-active and all-active policies.
  3. Verify platform and release-specific EVPN support rather than enabling every address family indiscriminately.
  4. Avoid reusing one VNI for unrelated tenant isolation boundaries.

Explanation

Correct Answer

A:

For a multihomed data center using redundant Ethernet segments, the relevant safeguard is: Check every underlay hop rather than changing only the leaf switch MTU. It matters while implementing: Provide sufficient underlay MTU for the intended inner payload or constrain end-host MTU safely. The fault involves: VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. The required acceptance result remains: A maximum-size approved test payload crosses the VXLAN tunnel without fragmentation-related failure.

Incorrect Answers

B:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. The appropriate correction for the reported case is: Check every underlay hop rather than changing only the leaf switch MTU.

C:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. Fixing that different mechanism would not address the current root cause: VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames.

D:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Its verification is distinct from the reported condition: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The design must avoid forwarding loops during failover.

Question 682

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: Many ASM receivers depend on one RP and lose initial source discovery after that device fails. The group traffic must reach interested receivers without flooding other locations. What important rollout safeguard is most relevant here?

  1. Protect election priorities and domain boundaries from unauthorized RP injection.
  2. Verify MSDP or supported PIM-based state synchronization according to the chosen anycast model.
  3. Consider unwanted sources and multicast boundary controls in an open ASM group.
  4. Avoid using reserved link-local multicast groups for arbitrary enterprise streams.

Explanation

Correct Answer

B:

For a campus distributing IP video to several buildings, the relevant safeguard is: Verify MSDP or supported PIM-based state synchronization according to the chosen anycast model. It matters while implementing: Deploy supported anycast RP members with the necessary source-state exchange mechanism. The fault involves: Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. The required acceptance result remains: After one RP fails, new group joins reach the surviving RP and active sources remain discoverable.

Incorrect Answers

A:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. The appropriate correction for the reported case is: Verify MSDP or supported PIM-based state synchronization according to the chosen anycast model.

C:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. Fixing that different mechanism would not address the current root cause: anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance.

D:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Its verification is distinct from the reported condition: Many ASM receivers depend on one RP and lose initial source discovery after that device fails. The group traffic must reach interested receivers without flooding other locations.

Question 683

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: A dual-homed Ethernet segment loses reachability after one attached PE fails because remote devices lack proper multihoming state. The overlay must relearn host reachability without stale tunnel selection. Which technical mechanism most directly explains the symptom?

  1. EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information.
  2. EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location.
  3. EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior.
  4. EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment.

Explanation

Correct Answer

C:

For an enterprise migrating virtual machines between racks, the governing mechanism is: EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. It explains the reported symptom: A dual-homed Ethernet segment loses reachability after one attached PE fails because remote devices lack proper multihoming state. The intended response is: Validate the Ethernet A-D advertisements and intended multihoming failover configuration. Verification: Remote PEs update reachability promptly when the attached PE withdraws its Ethernet segment route.

Incorrect Answers

A:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. This alternative mechanism does not match the current fault.

B:

EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. Fixing that different mechanism would not address the current root cause: EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior.

D:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Its verification is distinct from the reported condition: A dual-homed Ethernet segment loses reachability after one attached PE fails because remote devices lack proper multihoming state. The overlay must relearn host reachability without stale tunnel selection.

Question 684

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The routing change must preserve control-plane consistency across areas. Which configuration adjustment should be made first to address this issue?

  1. Configure the intended OSPFv3 area and IPv6-enabled link interfaces on both peers.
  2. Find the unstable interface or neighbor and stabilize its physical or protocol conditions.
  3. Compare show ospf database and LSAs against the intended origin and area boundaries.
  4. Validate the IPv6 link-local adjacency and correct outgoing logical interface for the route.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, the direct corrective action is: Validate the IPv6 link-local adjacency and correct outgoing logical interface for the route. This addresses the mechanism: OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Confirm by checking: An IPv6 destination installs with an expected link-local next hop and forwards successfully. During rollout, do not remove required link-local communication while tightening IPv6 filters.

Incorrect Answers

A:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. The appropriate correction for the reported case is: Validate the IPv6 link-local adjacency and correct outgoing logical interface for the route.

B:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. Fixing that different mechanism would not address the current root cause: OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.

C:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. Its verification is distinct from the reported condition: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The routing change must preserve control-plane consistency across areas.

Question 685

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: A switch places latency-sensitive voice frames and bulk backups into the same egress queue despite different treatment requirements. Classification and downstream remarking must not be confused. Which operational result would most clearly confirm the fix?

  1. Queue statistics show traffic entering different forwarding classes during a congestion test.
  2. Queue counters show the intended internal class and egress capture shows appropriate markings.
  3. Packets with the approved DSCP values enter the expected forwarding queues.
  4. The workstation's spoofed expedited marking is reset and voice retains the intended priority.

Explanation

Correct Answer

A:

For a financial services network enforcing trusted DSCP markings, the decisive evidence is: Queue statistics show traffic entering different forwarding classes during a congestion test. This validates the action: Map approved voice traffic to an appropriate expedited-forwarding class and backups to a suitable lower class. Because: Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. The appropriate correction for the reported case is: Map approved voice traffic to an appropriate expedited-forwarding class and backups to a suitable lower class.

C:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Fixing that different mechanism would not address the current root cause: Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior.

D:

The ingress trust boundary decides whether external markings should be accepted or reclassified. Its verification is distinct from the reported condition: A switch places latency-sensitive voice frames and bulk backups into the same egress queue despite different treatment requirements. Classification and downstream remarking must not be confused.

Question 686

At a hospital onboarding diverse employee devices, a Junos specialist investigates this scenario: A packet capture shows client EAPOL frames but no RADIUS transaction and engineers believe the laptop should contact RADIUS directly. Critical permitted endpoints need a documented authentication fallback. Which configuration adjustment should be made first to address this issue?

  1. Set an explicit supported fallback policy and test a simulated RADIUS timeout.
  2. Verify switch-side RADIUS connectivity and authenticator configuration rather than redirecting the client to the server.
  3. Configure supported guest VLAN behavior and its restricted connectivity policy on the access port.
  4. Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity.

Explanation

Correct Answer

B:

For a hospital onboarding diverse employee devices, the direct corrective action is: Verify switch-side RADIUS connectivity and authenticator configuration rather than redirecting the client to the server. This addresses the mechanism: In common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server. Confirm by checking: An EAPOL attempt leads to the intended RADIUS Access-Request and a resulting authorization decision. During rollout, protect shared secrets and ensure the RADIUS server permits the correct switch as a client.

Incorrect Answers

A:

Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. The appropriate correction for the reported case is: Verify switch-side RADIUS connectivity and authenticator configuration rather than redirecting the client to the server.

C:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Fixing that different mechanism would not address the current root cause: in common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server.

D:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. Its verification is distinct from the reported condition: A packet capture shows client EAPOL frames but no RADIUS transaction and engineers believe the laptop should contact RADIUS directly. Critical permitted endpoints need a documented authentication fallback.

Question 687

At a corporate campus enforcing wired network access, a Junos specialist investigates this scenario: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. Unknown endpoints must not gain access to protected internal VLANs. What requirement most specifically calls for this approach?

  1. Use 802.1X port-based authentication for credential-aware enterprise clients.
  2. Use ordered multi-method access authentication for mixed enterprise endpoints.
  3. Use MAC RADIUS as a controlled fallback for devices lacking 802.1X support.
  4. Use a guest VLAN for limited access by suitable non-802.1X devices.

Explanation

Correct Answer

C:

For a corporate campus enforcing wired network access, this mechanism fits the requirement: Use MAC RADIUS as a controlled fallback for devices lacking 802.1X support. The design is appropriate because: MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. In this scenario, the observed issue is: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. The corresponding implementation is: Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity.

Incorrect Answers

A:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. The appropriate correction for the reported case is: Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity.

B:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. Fixing that different mechanism would not address the current root cause: MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy.

D:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Its verification is distinct from the reported condition: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. Unknown endpoints must not gain access to protected internal VLANs.

Question 688

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A user plugs a small switch into a campus edge port and introduces unexpected spanning-tree control traffic. The service must preserve tags without bridging unrelated tenants. Which configuration adjustment should be made first to address this issue?

  1. Configure supported VSTP membership and root priorities for the chosen VLANs.
  2. Set the intended VLAN membership on the access logical interface and verify the port mode.
  3. Configure a supported Layer 2 firewall filter with the intended VLAN assignment action.
  4. Enable the supported BPDU protection behavior on designated host-facing ports.

Explanation

Correct Answer

D:

For a provider Ethernet network carrying customer Layer 2 services, the direct corrective action is: Enable the supported BPDU protection behavior on designated host-facing ports. This addresses the mechanism: BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. Confirm by checking: A controlled received-BPDU test produces the expected protective state and alert. During rollout, do not apply edge-port BPDU protection to legitimate switch-to-switch trunks.

Incorrect Answers

A:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. The appropriate correction for the reported case is: Enable the supported BPDU protection behavior on designated host-facing ports.

B:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages.

C:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. Its verification is distinct from the reported condition: A user plugs a small switch into a campus edge port and introduces unexpected spanning-tree control traffic. The service must preserve tags without bridging unrelated tenants.

Question 689

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: OSPF adjacency troubleshooting reveals two different devices using the same router identifier. The internal forwarding path must remain stable when one uplink fails. What is the most likely design-related cause?

  1. The OSPF router ID uniquely identifies an originator of link-state information within the routing domain.
  2. Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully.
  3. A conventional stub area limits external LSAs and uses a suitable default route for outside reachability.
  4. OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.

Explanation

Correct Answer

A:

For a national enterprise designing OSPF between offices, the governing mechanism is: The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. It explains the reported symptom: OSPF adjacency troubleshooting reveals two different devices using the same router identifier. The intended response is: Configure distinct stable router IDs and restart or refresh affected protocol processes as supported. Verification: Each OSPF peer reports a distinct expected router ID and adjacency state becomes stable.

Incorrect Answers

B:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. This alternative mechanism does not match the current fault.

C:

A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. Fixing that different mechanism would not address the current root cause: the OSPF router ID uniquely identifies an originator of link-state information within the routing domain.

D:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Its verification is distinct from the reported condition: OSPF adjacency troubleshooting reveals two different devices using the same router identifier. The internal forwarding path must remain stable when one uplink fails.

Question 690

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: A remote VTEP cannot locate a host MAC in another VXLAN segment even though the BGP EVPN session is established. The tenant traffic must remain isolated across the overlay. What verification result should the engineer expect?

  1. Each PE sees its expected remote multihoming peers and a consistent segment identity.
  2. A remote EVPN MAC table resolves the host to the expected originating VTEP.
  3. The remote IP-VRF learns the approved prefix with valid overlay next-hop resolution.
  4. Only matching tenant MAC and prefix advertisements enter each isolated EVPN instance.

Explanation

Correct Answer

B:

For a Junos EVPN-VXLAN leaf-spine fabric, the decisive evidence is: A remote EVPN MAC table resolves the host to the expected originating VTEP. This validates the action: Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance. Because: EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. The appropriate correction for the reported case is: Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance.

C:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Fixing that different mechanism would not address the current root cause: EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.

D:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. Its verification is distinct from the reported condition: A remote VTEP cannot locate a host MAC in another VXLAN segment even though the BGP EVPN session is established. The tenant traffic must remain isolated across the overlay.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests