mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 6

Question 50

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The routing change must preserve control-plane consistency across areas. What important rollout safeguard is most relevant here?

  1. Treat a virtual link as a controlled exception and plan a physical backbone repair.
  2. Do not rely on arbitrary area-to-area links to replace a valid backbone design.
  3. Do not confuse Junos route preference with the BGP LOCAL_PREF attribute.
  4. Do not change the backbone area relationship without validating ABR connectivity.

Explanation

Correct Answer

B:

For a university separating multiple OSPF areas, the relevant safeguard is: Do not rely on arbitrary area-to-area links to replace a valid backbone design. It matters while implementing: Connect the appropriate area border routers to area 0 and repair the multi-area topology. The fault involves: OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. The required acceptance result remains: Interarea routes appear in expected areas with valid backbone reachability.

Incorrect Answers

A:

A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. The appropriate correction for the reported case is: Do not rely on arbitrary area-to-area links to replace a valid backbone design.

C:

Junos first chooses active routing-table entries using protocol route preference before forwarding installation. Fixing that different mechanism would not address the current root cause: OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers.

D:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Its verification is distinct from the reported condition: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The routing change must preserve control-plane consistency across areas.

Question 51

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The proposed behavior must be validated on actual switching ports. What verification result should the engineer expect?

  1. A controlled burst is limited while ordinary ARP and discovery traffic remains functional.
  2. Two isolated test devices cannot communicate directly but each can reach the authorized gateway.
  3. Customer control frames arrive at the remote customer edge without altering provider bridge state.
  4. show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet.

Explanation

Correct Answer

C:

For a data-center access fabric using tagged trunks, the decisive evidence is: Customer control frames arrive at the remote customer edge without altering provider bridge state. This validates the action: Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN. Because: Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Layer 2 storm control limits specified excessive broadcast or multicast traffic on a port. The appropriate correction for the reported case is: Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN.

B:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. Fixing that different mechanism would not address the current root cause: layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain.

D:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The proposed behavior must be validated on actual switching ports.

Question 52

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The overlay must relearn host reachability without stale tunnel selection. What protocol behavior accounts for this failure?

  1. EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment.
  2. EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information.
  3. EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.
  4. A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination.

Explanation

Correct Answer

D:

For an enterprise migrating virtual machines between racks, the governing mechanism is: A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination. It explains the reported symptom: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The intended response is: Configure a consistent nonconflicting ESI on the intended dual-homed attachment. Verification: Both participating leaves advertise the same segment identity and remote EVPN state reflects multihoming.

Incorrect Answers

A:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. This alternative mechanism does not match the current fault.

B:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. Fixing that different mechanism would not address the current root cause: a common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination.

C:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Its verification is distinct from the reported condition: Two leaf switches dual-home one server but the remote fabric treats their attachments as unrelated segments. The overlay must relearn host reachability without stale tunnel selection.

Question 53

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Two parallel switch uplinks form a Layer 2 loop because they were attached without a compatible aggregation design. The change must retain both link resilience and correct VLAN isolation. What protocol behavior accounts for this failure?

  1. A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree.
  2. Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices.
  3. Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain.
  4. Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables.

Explanation

Correct Answer

A:

For a large enterprise updating redundant switch links, the governing mechanism is: A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. It explains the reported symptom: Two parallel switch uplinks form a Layer 2 loop because they were attached without a compatible aggregation design. The intended response is: Configure supported LACP or static aggregated Ethernet on both ends as appropriate. Verification: The aggregate reports active members and traffic survives loss of one constituent link.

Incorrect Answers

B:

Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. This alternative mechanism does not match the current fault.

C:

Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. Fixing that different mechanism would not address the current root cause: a link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree.

D:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. Its verification is distinct from the reported condition: Two parallel switch uplinks form a Layer 2 loop because they were attached without a compatible aggregation design. The change must retain both link resilience and correct VLAN isolation.

Question 54

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The diagnosis must distinguish a healthy BGP session from eligible received routes. Which observation proves this requirement has been satisfied?

  1. Only intended prefix lengths pass the import or export policy.
  2. The upstream receives the appended path and a controlled test prefers the primary ingress.
  3. show route protocol bgp reveals the selected path and its AS-path sequence.
  4. show route extensive or advertised-route output includes the expected community on the intended prefixes.

Explanation

Correct Answer

B:

For a managed network team troubleshooting an internet edge, the decisive evidence is: The upstream receives the appended path and a controlled test prefers the primary ingress. This validates the action: Apply targeted AS-path prepend in an authorized export policy for the backup link. Because: AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. The appropriate correction for the reported case is: Apply targeted AS-path prepend in an authorized export policy for the backup link.

C:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Fixing that different mechanism would not address the current root cause: AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection.

D:

BGP community attributes carry policy tags that importing or exporting routers can match. Its verification is distinct from the reported condition: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 55

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: Repeated topology flaps produce transient internal route changes and high routing-process load. The correction must not expose administrative network prefixes. Which underlying distinction should guide troubleshooting?

  1. OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries.
  2. Type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection.
  3. Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB.
  4. OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.

Explanation

Correct Answer

C:

For a healthcare organization connecting redundant facilities, the governing mechanism is: Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. It explains the reported symptom: Repeated topology flaps produce transient internal route changes and high routing-process load. The intended response is: Find the unstable interface or neighbor and stabilize its physical or protocol conditions. Verification: OSPF topology and route-change counters settle after fault correction.

Incorrect Answers

A:

OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries. This alternative mechanism does not match the current fault.

B:

Type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection. Fixing that different mechanism would not address the current root cause: link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB.

D:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. Its verification is distinct from the reported condition: Repeated topology flaps produce transient internal route changes and high routing-process load. The correction must not expose administrative network prefixes.

Question 56

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: Two routers on a dedicated Ethernet link are unexpectedly participating in broadcast-network DR election. The internal forwarding path must remain stable when one uplink fails. What is the most likely design-related cause?

  1. OSPF neighbors on a common link must agree on the area identifier used in Hello processing.
  2. OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.
  3. Neighbor compatibility depends on matching Hello and dead intervals for the participating link.
  4. OSPF interface network type influences neighbor formation and whether DR and BDR election is used.

Explanation

Correct Answer

D:

For a national enterprise designing OSPF between offices, the governing mechanism is: OSPF interface network type influences neighbor formation and whether DR and BDR election is used. It explains the reported symptom: Two routers on a dedicated Ethernet link are unexpectedly participating in broadcast-network DR election. The intended response is: Configure a supported OSPF point-to-point network type consistently on the dedicated link. Verification: The link operates with the intended point-to-point adjacency without DR election.

Incorrect Answers

A:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. This alternative mechanism does not match the current fault.

B:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Fixing that different mechanism would not address the current root cause: OSPF interface network type influences neighbor formation and whether DR and BDR election is used.

C:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. Its verification is distinct from the reported condition: Two routers on a dedicated Ethernet link are unexpectedly participating in broadcast-network DR election. The internal forwarding path must remain stable when one uplink fails.

Question 57

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: Two available OSPF WAN paths use the less desirable circuit even though both adjacencies are healthy. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which underlying distinction should guide troubleshooting?

  1. OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits.
  2. A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs.
  3. OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.
  4. OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.

Explanation

Correct Answer

A:

For a regional provider operating Junos-based branch routers, the governing mechanism is: OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. It explains the reported symptom: Two available OSPF WAN paths use the less desirable circuit even though both adjacencies are healthy. The intended response is: Set appropriate interface metrics that reflect the desired route costs across the topology. Verification: The intended path has lower total cost and appears as the active route for a test prefix.

Incorrect Answers

B:

A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. This alternative mechanism does not match the current fault.

C:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. Fixing that different mechanism would not address the current root cause: OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits.

D:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Its verification is distinct from the reported condition: Two available OSPF WAN paths use the less desirable circuit even though both adjacencies are healthy. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 58

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A route is absent from the active table even though BGP packet counters show received updates. The change must not introduce an unwanted autonomous-system route leak. Which precaution should be checked before committing the change?

  1. Check interoperability and avoid substituting truncated ASN values for real peer identity.
  2. Do not treat a neighbor's Established state as proof that its prefixes were accepted.
  3. Preserve reflector redundancy and cluster design to avoid hidden routing loops.
  4. Do not claim origin always wins over local preference or AS-path length.

Explanation

Correct Answer

B:

For a large organization using Junos route reflectors, the relevant safeguard is: Do not treat a neighbor's Established state as proof that its prefixes were accepted. It matters while implementing: Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix. The fault involves: Hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection. The required acceptance result remains: The reason for exclusion is identified and a corrected route becomes eligible without collateral changes.

Incorrect Answers

A:

BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. The appropriate correction for the reported case is: Do not treat a neighbor's Established state as proof that its prefixes were accepted.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection.

D:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. Its verification is distinct from the reported condition: A route is absent from the active table even though BGP packet counters show received updates. The change must not introduce an unwanted autonomous-system route leak.

Question 59

At a corporate campus enforcing wired network access, a Junos specialist investigates this scenario: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. Unknown endpoints must not gain access to protected internal VLANs. Which technical mechanism most directly explains the symptom?

  1. 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access.
  2. A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it.
  3. MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy.
  4. A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN.

Explanation

Correct Answer

C:

For a corporate campus enforcing wired network access, the governing mechanism is: MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. It explains the reported symptom: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. The intended response is: Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity. Verification: The intended printer gains restricted access while an unrecognized MAC does not inherit privileged resources.

Incorrect Answers

A:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. This alternative mechanism does not match the current fault.

B:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Fixing that different mechanism would not address the current root cause: MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy.

D:

A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. Its verification is distinct from the reported condition: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. Unknown endpoints must not gain access to protected internal VLANs.

Question 60

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The internal forwarding path must remain stable when one uplink fails. What is the most likely design-related cause?

  1. OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.
  2. Neighbor compatibility depends on matching Hello and dead intervals for the participating link.
  3. Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects.
  4. A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos.

Explanation

Correct Answer

D:

For a national enterprise designing OSPF between offices, the governing mechanism is: A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos. It explains the reported symptom: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The intended response is: Configure supported OSPF passive behavior on the host-facing interface. Verification: The subnet is reachable from OSPF peers while no neighbor forms on the passive port.

Incorrect Answers

A:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. This alternative mechanism does not match the current fault.

B:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. Fixing that different mechanism would not address the current root cause: a passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos.

C:

Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. Its verification is distinct from the reported condition: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The internal forwarding path must remain stable when one uplink fails.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests