mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 5

Question 40

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The design must avoid forwarding loops during failover. What risk must the implementation avoid?

  1. Check duplicate-MAC protection to avoid interpreting a persistent Layer 2 loop as legitimate mobility.
  2. Verify IRB and route-target configuration and avoid leaking unrelated tenant subnets.
  3. Avoid reusing one VNI for unrelated tenant isolation boundaries.
  4. Verify platform and release-specific EVPN support rather than enabling every address family indiscriminately.

Explanation

Correct Answer

D:

For a multihomed data center using redundant Ethernet segments, the relevant safeguard is: Verify platform and release-specific EVPN support rather than enabling every address family indiscriminately. It matters while implementing: Enable a supported EVPN BGP signaling relationship with the intended route targets and instances. The fault involves: EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. The required acceptance result remains: show route table BGP.evpn.0 or equivalent EVPN table contains valid remote routes.

Incorrect Answers

A:

EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. The appropriate correction for the reported case is: Verify platform and release-specific EVPN support rather than enabling every address family indiscriminately.

B:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Fixing that different mechanism would not address the current root cause: EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information.

C:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Its verification is distinct from the reported condition: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The design must avoid forwarding loops during failover.

Question 41

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The overlay must relearn host reachability without stale tunnel selection. For which use case is this feature the best match?

  1. Use EVPN split horizon to prevent bridging loops across dual-homed Ethernet segments.
  2. Use a shared ESI for EVPN multihomed links belonging to one Ethernet segment.
  3. Use EVPN DF election to control redundant BUM forwarding on multihomed segments.
  4. Use EVPN type-4 routes for Ethernet segment discovery among multihomed peers.

Explanation

Correct Answer

A:

For an enterprise migrating virtual machines between racks, this mechanism fits the requirement: Use EVPN split horizon to prevent bridging loops across dual-homed Ethernet segments. The design is appropriate because: EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment. In this scenario, the observed issue is: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The corresponding implementation is: Verify supported split-horizon or ESI label handling for the affected multihomed path.

Incorrect Answers

B:

A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination. The appropriate correction for the reported case is: Verify supported split-horizon or ESI label handling for the affected multihomed path.

C:

EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments. Fixing that different mechanism would not address the current root cause: EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment.

D:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Its verification is distinct from the reported condition: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The overlay must relearn host reachability without stale tunnel selection.

Question 42

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A redundant Layer 2 ring creates a broadcast storm when multiple paths forward simultaneously. The proposed behavior must be validated on actual switching ports. Which underlying distinction should guide troubleshooting?

  1. Private VLAN community ports support intra-community traffic while preventing communication with other communities.
  2. Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states.
  3. MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest.
  4. An untagged Ethernet access port places endpoint traffic into its configured access VLAN.

Explanation

Correct Answer

B:

For a data-center access fabric using tagged trunks, the governing mechanism is: Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. It explains the reported symptom: A redundant Layer 2 ring creates a broadcast storm when multiple paths forward simultaneously. The intended response is: Enable a consistent MSTP topology and verify the expected alternate-port state. Verification: A loop-free topology has one blocked alternate path that activates after a controlled failure.

Incorrect Answers

A:

Private VLAN community ports support intra-community traffic while preventing communication with other communities. This alternative mechanism does not match the current fault.

C:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. Fixing that different mechanism would not address the current root cause: spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states.

D:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: A redundant Layer 2 ring creates a broadcast storm when multiple paths forward simultaneously. The proposed behavior must be validated on actual switching ports.

Question 43

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A BGP router has internal routes in its RIB but should advertise only an authorized subset to an external peer. The change must not introduce an unwanted autonomous-system route leak. What would demonstrate a successful correction under test?

  1. The neighbor receives the required BGP route despite a competing active non-BGP route.
  2. A bounded test demonstrates alerting or session protection when the accepted limit is exceeded.
  3. The peer receives only the approved announcements and no internal management subnets.
  4. Accepted routes appear in the BGP route table and unwanted routes are rejected or hidden as intended.

Explanation

Correct Answer

C:

For a large organization using Junos route reflectors, the decisive evidence is: The peer receives only the approved announcements and no internal management subnets. This validates the action: Apply a narrowly matched export policy for intended prefixes to the relevant BGP group. Because: BGP export policy controls which eligible active routes the speaker announces to selected neighbors. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. The appropriate correction for the reported case is: Apply a narrowly matched export policy for intended prefixes to the relevant BGP group.

B:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Fixing that different mechanism would not address the current root cause: BGP export policy controls which eligible active routes the speaker announces to selected neighbors.

D:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. Its verification is distinct from the reported condition: A BGP router has internal routes in its RIB but should advertise only an authorized subset to an external peer. The change must not introduce an unwanted autonomous-system route leak.

Question 44

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The routing change must preserve control-plane consistency across areas. Which technical mechanism most directly explains the symptom?

  1. A conventional stub area limits external LSAs and uses a suitable default route for outside reachability.
  2. OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.
  3. OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries.
  4. Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, the governing mechanism is: Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. It explains the reported symptom: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The intended response is: Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection. Verification: An injected forwarding failure brings down the affected neighbor within the planned interval.

Incorrect Answers

A:

A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. This alternative mechanism does not match the current fault.

B:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. Fixing that different mechanism would not address the current root cause: Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers.

C:

OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries. Its verification is distinct from the reported condition: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The routing change must preserve control-plane consistency across areas.

Question 45

At a branch router serving several application classes, a Junos specialist investigates this scenario: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The team must validate packet drops by actual queue statistics. What requirement most specifically calls for this approach?

  1. Use packet-loss priority to differentiate discard behavior within forwarding treatment.
  2. Use BA DSCP classification when trustworthy upstream packet markings exist.
  3. Use strict-priority scheduling for carefully bounded low-latency traffic.
  4. Use configured drop profiles for controlled congestion management.

Explanation

Correct Answer

A:

For a branch router serving several application classes, this mechanism fits the requirement: Use packet-loss priority to differentiate discard behavior within forwarding treatment. The design is appropriate because: Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. In this scenario, the observed issue is: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The corresponding implementation is: Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification.

Incorrect Answers

B:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. The appropriate correction for the reported case is: Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification.

C:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Fixing that different mechanism would not address the current root cause: junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure.

D:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. Its verification is distinct from the reported condition: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The team must validate packet drops by actual queue statistics.

Question 46

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The change must preserve source identity and avoid multicast loops. Which precaution should be checked before committing the change?

  1. Consider unwanted sources and multicast boundary controls in an open ASM group.
  2. Protect election priorities and domain boundaries from unauthorized RP injection.
  3. Verify MSDP or supported PIM-based state synchronization according to the chosen anycast model.
  4. Check traffic interruption and route symmetry before changing SPT thresholds broadly.

Explanation

Correct Answer

B:

For a live-event venue using routed multicast streaming, the relevant safeguard is: Protect election priorities and domain boundaries from unauthorized RP injection. It matters while implementing: Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope. The fault involves: PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. The required acceptance result remains: Routers learn the expected RP mapping and group traffic builds a valid shared tree.

Incorrect Answers

A:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. The appropriate correction for the reported case is: Protect election priorities and domain boundaries from unauthorized RP injection.

C:

Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. Fixing that different mechanism would not address the current root cause: PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain.

D:

PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. Its verification is distinct from the reported condition: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The change must preserve source identity and avoid multicast loops.

Question 47

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The intended segmentation and loop prevention must remain intact. Which limitation should guide the change control?

  1. Validate filter match order and feature support to avoid broad unintended reassignment.
  2. Avoid partial region updates that temporarily create different spanning-tree domains.
  3. Check service mappings at every handoff and verify no shared untagged fallback path.
  4. Validate MTU overhead and prevent tenant service tags from colliding.

Explanation

Correct Answer

C:

For a campus network built with Juniper EX switches, the relevant safeguard is: Check service mappings at every handoff and verify no shared untagged fallback path. It matters while implementing: Assign distinct outer service VLAN identities to the independent customer services. The fault involves: A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate. The required acceptance result remains: Captures show identical inner tags transported only within their intended outer service VLANs.

Incorrect Answers

A:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. The appropriate correction for the reported case is: Check service mappings at every handoff and verify no shared untagged fallback path.

B:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. Fixing that different mechanism would not address the current root cause: a provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate.

D:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Its verification is distinct from the reported condition: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The intended segmentation and loop prevention must remain intact.

Question 48

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: A dual-homed Ethernet segment loses reachability after one attached PE fails because remote devices lack proper multihoming state. The tenant traffic must remain isolated across the overlay. When would the described mechanism be appropriate?

  1. Use EVPN type-4 routes for Ethernet segment discovery among multihomed peers.
  2. Use a shared ESI for EVPN multihomed links belonging to one Ethernet segment.
  3. Account for VXLAN header overhead when sizing underlay MTU.
  4. Use EVPN type-1 routes for Ethernet segment reachability and efficient multihoming withdrawal.

Explanation

Correct Answer

D:

For a Junos EVPN-VXLAN leaf-spine fabric, this mechanism fits the requirement: Use EVPN type-1 routes for Ethernet segment reachability and efficient multihoming withdrawal. The design is appropriate because: EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. In this scenario, the observed issue is: A dual-homed Ethernet segment loses reachability after one attached PE fails because remote devices lack proper multihoming state. The corresponding implementation is: Validate the Ethernet A-D advertisements and intended multihoming failover configuration.

Incorrect Answers

A:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. The appropriate correction for the reported case is: Validate the Ethernet A-D advertisements and intended multihoming failover configuration.

B:

A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination. Fixing that different mechanism would not address the current root cause: EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior.

C:

VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. Its verification is distinct from the reported condition: A dual-homed Ethernet segment loses reachability after one attached PE fails because remote devices lack proper multihoming state. The tenant traffic must remain isolated across the overlay. When would the described mechanism be appropriate.

Question 49

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: An enterprise deploys IPv6 group delivery but attempts to identify receivers with ordinary IPv6 unicast addresses. The change must preserve source identity and avoid multicast loops. Which limitation should guide the change control?

  1. Do not confuse IPv6 multicast scope with the IPv4 private addressing range.
  2. Avoid using reserved link-local multicast groups for arbitrary enterprise streams.
  3. Do not disable loop-prevention checks simply to make unwanted multicast traffic pass.
  4. Test the backup DR behavior so only authorized registration paths remain available.

Explanation

Correct Answer

A:

For a live-event venue using routed multicast streaming, the relevant safeguard is: Do not confuse IPv6 multicast scope with the IPv4 private addressing range. It matters while implementing: Select a suitable IPv6 multicast group and scope for the approved application. The fault involves: IPv6 multicast destinations begin in the FF00::/8 range and include scope information. The required acceptance result remains: An eligible receiver joins the IPv6 multicast group and receives one expected copy.

Incorrect Answers

B:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. The appropriate correction for the reported case is: Do not confuse IPv6 multicast scope with the IPv4 private addressing range.

C:

Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. Fixing that different mechanism would not address the current root cause: IPv6 multicast destinations begin in the FF00::/8 range and include scope information.

D:

PIM designated-router election selects the local router responsible for certain first-hop PIM functions. Its verification is distinct from the reported condition: An enterprise deploys IPv6 group delivery but attempts to identify receivers with ordinary IPv6 unicast addresses. The change must preserve source identity and avoid multicast loops.

Question 50

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The routing change must preserve control-plane consistency across areas. What important rollout safeguard is most relevant here?

  1. Treat a virtual link as a controlled exception and plan a physical backbone repair.
  2. Do not rely on arbitrary area-to-area links to replace a valid backbone design.
  3. Do not confuse Junos route preference with the BGP LOCAL_PREF attribute.
  4. Do not change the backbone area relationship without validating ABR connectivity.

Explanation

Correct Answer

B:

For a university separating multiple OSPF areas, the relevant safeguard is: Do not rely on arbitrary area-to-area links to replace a valid backbone design. It matters while implementing: Connect the appropriate area border routers to area 0 and repair the multi-area topology. The fault involves: OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. The required acceptance result remains: Interarea routes appear in expected areas with valid backbone reachability.

Incorrect Answers

A:

A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. The appropriate correction for the reported case is: Do not rely on arbitrary area-to-area links to replace a valid backbone design.

C:

Junos first chooses active routing-table entries using protocol route preference before forwarding installation. Fixing that different mechanism would not address the current root cause: OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers.

D:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Its verification is distinct from the reported condition: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The routing change must preserve control-plane consistency across areas.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests