mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 67

Question 660

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The chosen route must have a valid data-plane next hop. What protocol behavior accounts for this failure?

  1. Junos BGP best-path logic generally prefers the external route when preceding comparisons tie.
  2. BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship.
  3. Route reflector cluster identifiers participate in loop detection on reflected BGP paths.
  4. Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases.

Explanation

Correct Answer

D:

For an enterprise core exchanging BGP routes over redundant WAN paths, the governing mechanism is: Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. It explains the reported symptom: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The intended response is: Enable advertise-inactive only for the intentional peer context and test its effect. Verification: The neighbor receives the required BGP route despite a competing active non-BGP route.

Incorrect Answers

A:

Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. This alternative mechanism does not match the current fault.

B:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Fixing that different mechanism would not address the current root cause: junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases.

C:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. Its verification is distinct from the reported condition: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The chosen route must have a valid data-plane next hop.

Question 661

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: An iBGP session over loopbacks fails because the outgoing TCP connection uses a physical-interface source address. The chosen route must have a valid data-plane next hop. Which precaution should be checked before committing the change?

  1. Ensure underlay IGP reachability to loopbacks before pinning the session source.
  2. Confirm negotiated refresh capability and test policy syntax before reprocessing large tables.
  3. Check interoperability and avoid substituting truncated ASN values for real peer identity.
  4. Avoid broad allow-as-in exceptions without a documented multi-AS design.

Explanation

Correct Answer

A:

For an enterprise core exchanging BGP routes over redundant WAN paths, the relevant safeguard is: Ensure underlay IGP reachability to loopbacks before pinning the session source. It matters while implementing: Set the BGP local-address to the intended routable loopback and verify remote peer configuration. The fault involves: Both ends of a loopback-based BGP session must reach and recognize the configured local addresses. The required acceptance result remains: show BGP neighbor reports the expected local source and established peer endpoint.

Incorrect Answers

B:

BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it. The appropriate correction for the reported case is: Ensure underlay IGP reachability to loopbacks before pinning the session source.

C:

BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. Fixing that different mechanism would not address the current root cause: both ends of a loopback-based BGP session must reach and recognize the configured local addresses.

D:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. Its verification is distinct from the reported condition: An iBGP session over loopbacks fails because the outgoing TCP connection uses a physical-interface source address. The chosen route must have a valid data-plane next hop.

Question 662

At a new office connecting VoIP phones to EX access switches, a Junos specialist investigates this scenario: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The rollout must support phones and connected workstations securely. Which technical mechanism most directly explains the symptom?

  1. Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions.
  2. Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment.
  3. A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.
  4. Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices.

Explanation

Correct Answer

B:

For a new office connecting VoIP phones to EX access switches, the governing mechanism is: Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. It explains the reported symptom: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The intended response is: Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic. Verification: Phone packets receive intended priority during congestion and desktop traffic cannot impersonate it.

Incorrect Answers

A:

Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. This alternative mechanism does not match the current fault.

C:

A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. Fixing that different mechanism would not address the current root cause: voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment.

D:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Its verification is distinct from the reported condition: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The rollout must support phones and connected workstations securely.

Question 663

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: Two external BGP routers are separated by intermediate routed devices and an ordinary directly connected peering does not work. The change must not introduce an unwanted autonomous-system route leak. Which observation proves this requirement has been satisfied?

  1. The neighbor receives the required BGP route despite a competing active non-BGP route.
  2. show bgp neighbor reports Established with the expected external peer AS.
  3. The multi-hop session establishes and uses the intended loopback source and destination.
  4. Reflected routes contain expected cluster-list information and survive individual reflector failure.

Explanation

Correct Answer

C:

For a large organization using Junos route reflectors, the decisive evidence is: The multi-hop session establishes and uses the intended loopback source and destination. This validates the action: Configure supported eBGP multihop behavior and reliable local-address selection for the approved peer. Because: A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. The appropriate correction for the reported case is: Configure supported eBGP multihop behavior and reliable local-address selection for the approved peer.

B:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Fixing that different mechanism would not address the current root cause: a nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint.

D:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. Its verification is distinct from the reported condition: Two external BGP routers are separated by intermediate routed devices and an ordinary directly connected peering does not work. The change must not introduce an unwanted autonomous-system route leak.

Question 664

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: Many individual branch prefixes are announced between areas and inflate other areas' route tables. The internal forwarding path must remain stable when one uplink fails. What protocol behavior accounts for this failure?

  1. OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.
  2. The link-state database and area LSA contents determine which routes the OSPF calculation can derive.
  3. OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs.
  4. An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation.

Explanation

Correct Answer

D:

For a national enterprise designing OSPF between offices, the governing mechanism is: An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. It explains the reported symptom: Many individual branch prefixes are announced between areas and inflate other areas' route tables. The intended response is: Configure appropriate ABR area-range summarization with valid aggregate boundaries. Verification: Remote areas receive the expected summarized routes and excluded addresses do not blackhole.

Incorrect Answers

A:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. This alternative mechanism does not match the current fault.

B:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. Fixing that different mechanism would not address the current root cause: an OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation.

C:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Its verification is distinct from the reported condition: Many individual branch prefixes are announced between areas and inflate other areas' route tables. The internal forwarding path must remain stable when one uplink fails.

Question 665

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A route is absent from the active table even though BGP packet counters show received updates. The routing policy must retain intended primary and backup paths. Which observation proves this requirement has been satisfied?

  1. The reason for exclusion is identified and a corrected route becomes eligible without collateral changes.
  2. Reflector clients receive BGP routes from other clients through the reflector.
  3. A policy test or advertised-route output confirms restricted prefixes are no longer accepted.
  4. The peer exchanges a test IPv4 prefix and the route enters inet.0 when eligible.

Explanation

Correct Answer

A:

For a dual-homed business network peering with two upstream providers, the decisive evidence is: The reason for exclusion is identified and a corrected route becomes eligible without collateral changes. This validates the action: Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix. Because: Hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. The appropriate correction for the reported case is: Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix.

C:

Junos policy terms are evaluated in configured order and a terminating action can end processing early. Fixing that different mechanism would not address the current root cause: hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection.

D:

BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. Its verification is distinct from the reported condition: A route is absent from the active table even though BGP packet counters show received updates. The routing policy must retain intended primary and backup paths.

Question 666

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: EVPN route advertisements are received but encapsulated VXLAN data packets fail between leaf switches. The tenant traffic must remain isolated across the overlay. What protocol behavior accounts for this failure?

  1. EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior.
  2. VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity.
  3. EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs.
  4. VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context.

Explanation

Correct Answer

B:

For a Junos EVPN-VXLAN leaf-spine fabric, the governing mechanism is: VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. It explains the reported symptom: EVPN route advertisements are received but encapsulated VXLAN data packets fail between leaf switches. The intended response is: Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability. Verification: A test VXLAN packet reaches the remote VTEP with successful decapsulation and host delivery.

Incorrect Answers

A:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. This alternative mechanism does not match the current fault.

C:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Fixing that different mechanism would not address the current root cause: VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity.

D:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Its verification is distinct from the reported condition: EVPN route advertisements are received but encapsulated VXLAN data packets fail between leaf switches. The tenant traffic must remain isolated across the overlay.

Question 667

At a branch router serving several application classes, a Junos specialist investigates this scenario: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The team must validate packet drops by actual queue statistics. Which operational change most directly resolves the observed failure?

  1. Use appropriate egress shaping for the traffic that must be rate-smoothed instead of indiscriminate ingress policing.
  2. Fix the relevant ingress classifier or multifield policy rather than only rewriting outgoing DSCP.
  3. Attach the appropriate DSCP BA classifier to the trusted ingress interface.
  4. Create a narrowly matched classifier filter and apply it at the correct ingress logical interface.

Explanation

Correct Answer

C:

For a branch router serving several application classes, the direct corrective action is: Attach the appropriate DSCP BA classifier to the trusted ingress interface. This addresses the mechanism: A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Confirm by checking: Packets with the approved DSCP values enter the expected forwarding queues. During rollout, do not trust unverified DSCP values from arbitrary user-controlled ports.

Incorrect Answers

A:

Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit. The appropriate correction for the reported case is: Attach the appropriate DSCP BA classifier to the trusted ingress interface.

B:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Fixing that different mechanism would not address the current root cause: a behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.

D:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Its verification is distinct from the reported condition: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The team must validate packet drops by actual queue statistics.

Question 668

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A service provider must carry identical customer VLAN IDs from different tenants without mixing their traffic. The service must preserve tags without bridging unrelated tenants. Which limitation should guide the change control?

  1. Preserve redundant root placement and test topology changes outside production peaks.
  2. Check LACP mode, member speed and VLAN consistency before bringing up the bundle.
  3. Check all intermediary devices rather than changing only the ingress port.
  4. Validate MTU overhead and prevent tenant service tags from colliding.

Explanation

Correct Answer

D:

For a provider Ethernet network carrying customer Layer 2 services, the relevant safeguard is: Validate MTU overhead and prevent tenant service tags from colliding. It matters while implementing: Configure supported provider bridging with a distinct service tag for each tenant context. The fault involves: IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. The required acceptance result remains: Captures show preserved inner customer tags inside the expected outer service tag.

Incorrect Answers

A:

Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance. The appropriate correction for the reported case is: Validate MTU overhead and prevent tenant service tags from colliding.

B:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. Fixing that different mechanism would not address the current root cause: IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.

C:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Its verification is distinct from the reported condition: A service provider must carry identical customer VLAN IDs from different tenants without mixing their traffic. The service must preserve tags without bridging unrelated tenants.

Question 669

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The routing change must preserve control-plane consistency across areas. Which configuration adjustment should be made first to address this issue?

  1. Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process.
  2. Configure distinct stable router IDs and restart or refresh affected protocol processes as supported.
  3. Apply a targeted interarea summarization or route-control policy at the correct OSPF hierarchy.
  4. Choose the intended external metric type for the redistributed prefix and validate path selection.

Explanation

Correct Answer

A:

For a university separating multiple OSPF areas, the direct corrective action is: Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process. This addresses the mechanism: Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Confirm by checking: Other OSPFv3 routers learn the specified external IPv6 prefix without unrelated statics. During rollout, check address families and filtering carefully to avoid importing every static IPv6 route.

Incorrect Answers

B:

The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. The appropriate correction for the reported case is: Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process.

C:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Fixing that different mechanism would not address the current root cause: junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.

D:

Type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection. Its verification is distinct from the reported condition: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The routing change must preserve control-plane consistency across areas.

Question 670

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A unicast frame is flooded across a VLAN because the switch lacks a destination MAC entry. The proposed behavior must be validated on actual switching ports. For which use case is this feature the best match?

  1. Use private VLAN isolated ports for same-subnet tenant isolation.
  2. Use the Ethernet switching table to explain known unicast forwarding.
  3. Use aggregated Ethernet for redundant parallel Ethernet links without independent forwarding loops.
  4. Use BPDU protection on host access ports to prevent rogue Layer 2 bridges.

Explanation

Correct Answer

B:

For a data-center access fabric using tagged trunks, this mechanism fits the requirement: Use the Ethernet switching table to explain known unicast forwarding. The design is appropriate because: Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. In this scenario, the observed issue is: A unicast frame is flooded across a VLAN because the switch lacks a destination MAC entry. The corresponding implementation is: Verify MAC learning and the relevant source port/VLAN association.

Incorrect Answers

A:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. The appropriate correction for the reported case is: Verify MAC learning and the relevant source port/VLAN association.

C:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. Fixing that different mechanism would not address the current root cause: layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables.

D:

BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. Its verification is distinct from the reported condition: A unicast frame is flooded across a VLAN because the switch lacks a destination MAC entry. The proposed behavior must be validated on actual switching ports.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests