mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 68

Question 670

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A unicast frame is flooded across a VLAN because the switch lacks a destination MAC entry. The proposed behavior must be validated on actual switching ports. For which use case is this feature the best match?

  1. Use private VLAN isolated ports for same-subnet tenant isolation.
  2. Use the Ethernet switching table to explain known unicast forwarding.
  3. Use aggregated Ethernet for redundant parallel Ethernet links without independent forwarding loops.
  4. Use BPDU protection on host access ports to prevent rogue Layer 2 bridges.

Explanation

Correct Answer

B:

For a data-center access fabric using tagged trunks, this mechanism fits the requirement: Use the Ethernet switching table to explain known unicast forwarding. The design is appropriate because: Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. In this scenario, the observed issue is: A unicast frame is flooded across a VLAN because the switch lacks a destination MAC entry. The corresponding implementation is: Verify MAC learning and the relevant source port/VLAN association.

Incorrect Answers

A:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. The appropriate correction for the reported case is: Verify MAC learning and the relevant source port/VLAN association.

C:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. Fixing that different mechanism would not address the current root cause: layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables.

D:

BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. Its verification is distinct from the reported condition: A unicast frame is flooded across a VLAN because the switch lacks a destination MAC entry. The proposed behavior must be validated on actual switching ports.

Question 671

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: An enterprise deploys IPv6 group delivery but attempts to identify receivers with ordinary IPv6 unicast addresses. The change must preserve source identity and avoid multicast loops. What would demonstrate a successful correction under test?

  1. Subscribers join the selected multicast group and receive matching test packets.
  2. An allowed test group crosses the boundary while a restricted group does not.
  3. An eligible receiver joins the IPv6 multicast group and receives one expected copy.
  4. The unneeded branch ages out or prunes while other receiver branches remain active.

Explanation

Correct Answer

C:

For a live-event venue using routed multicast streaming, the decisive evidence is: An eligible receiver joins the IPv6 multicast group and receives one expected copy. This validates the action: Select a suitable IPv6 multicast group and scope for the approved application. Because: IPv6 multicast destinations begin in the FF00::/8 range and include scope information. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. The appropriate correction for the reported case is: Select a suitable IPv6 multicast group and scope for the approved application.

B:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Fixing that different mechanism would not address the current root cause: IPv6 multicast destinations begin in the FF00::/8 range and include scope information.

D:

PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes. Its verification is distinct from the reported condition: An enterprise deploys IPv6 group delivery but attempts to identify receivers with ordinary IPv6 unicast addresses. The change must preserve source identity and avoid multicast loops.

Question 672

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: An enterprise receives multiple paths from one neighboring AS and wants to influence which entry that AS uses. The change must not introduce an unwanted autonomous-system route leak. Which design objective is best served by this mechanism?

  1. Use eBGP multihop for intentionally non-direct external BGP peerings.
  2. Use four-octet AS number support when peering with modern high-numbered ASes.
  3. Use route refresh for non-disruptive reevaluation of inbound BGP policy.
  4. Use MED to suggest a preferred inbound interconnection to a cooperating neighbor AS.

Explanation

Correct Answer

D:

For a large organization using Junos route reflectors, this mechanism fits the requirement: Use MED to suggest a preferred inbound interconnection to a cooperating neighbor AS. The design is appropriate because: BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. In this scenario, the observed issue is: An enterprise receives multiple paths from one neighboring AS and wants to influence which entry that AS uses. The corresponding implementation is: Apply intended MED values for comparable advertisements and validate the peer's MED treatment.

Incorrect Answers

A:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. The appropriate correction for the reported case is: Apply intended MED values for comparable advertisements and validate the peer's MED treatment.

B:

BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. Fixing that different mechanism would not address the current root cause: BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy.

C:

BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it. Its verification is distinct from the reported condition: An enterprise receives multiple paths from one neighboring AS and wants to influence which entry that AS uses. The change must not introduce an unwanted autonomous-system route leak.

Question 673

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Two adjacent switches use MSTP but appear to occupy different regions despite a shared physical trunk. The change must retain both link resilience and correct VLAN isolation. Which observation proves this requirement has been satisfied?

  1. Operational state shows common region information and expected instance boundaries.
  2. Root and port states remain stable on both sides during controlled link transitions.
  3. show spanning-tree interface reports the planned instance port roles for each mapped VLAN.
  4. show ethernet-switching table contains the expected MAC-to-port entry and forwarding becomes selective.

Explanation

Correct Answer

A:

For a large enterprise updating redundant switch links, the decisive evidence is: Operational state shows common region information and expected instance boundaries. This validates the action: Align the MSTP region attributes and intended VLAN mappings across the switches. Because: MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. The appropriate correction for the reported case is: Align the MSTP region attributes and intended VLAN mappings across the switches.

C:

Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances. Fixing that different mechanism would not address the current root cause: MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest.

D:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. Its verification is distinct from the reported condition: Two adjacent switches use MSTP but appear to occupy different regions despite a shared physical trunk. The change must retain both link resilience and correct VLAN isolation.

Question 674

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: A VXLAN broadcast frame never reaches remote VTEPs even though known unicast MAC lookups work. The design must avoid forwarding loops during failover. What is the most likely design-related cause?

  1. EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs.
  2. EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership.
  3. VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames.
  4. EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.

Explanation

Correct Answer

B:

For a multihomed data center using redundant Ethernet segments, the governing mechanism is: EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership. It explains the reported symptom: A VXLAN broadcast frame never reaches remote VTEPs even though known unicast MAC lookups work. The intended response is: Ensure eligible IMET route advertisements and the configured VXLAN replication mechanism are consistent. Verification: Remote VTEPs have the expected BUM distribution list and ARP broadcast traffic arrives.

Incorrect Answers

A:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. This alternative mechanism does not match the current fault.

C:

VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. Fixing that different mechanism would not address the current root cause: EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership.

D:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Its verification is distinct from the reported condition: A VXLAN broadcast frame never reaches remote VTEPs even though known unicast MAC lookups work. The design must avoid forwarding loops during failover.

Question 675

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: A circuit works for short frames but drops full-size customer frames after stacked VLAN tagging is enabled. The intended segmentation and loop prevention must remain intact. What is the most likely design-related cause?

  1. IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.
  2. A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate.
  3. Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU.
  4. Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear.

Explanation

Correct Answer

C:

For a campus network built with Juniper EX switches, the governing mechanism is: Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. It explains the reported symptom: A circuit works for short frames but drops full-size customer frames after stacked VLAN tagging is enabled. The intended response is: Increase supported link MTU consistently or adjust customer frame limits where required. Verification: Maximum expected tagged frames traverse every provider hop without oversize drops.

Incorrect Answers

A:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. This alternative mechanism does not match the current fault.

B:

A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate. Fixing that different mechanism would not address the current root cause: adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU.

D:

Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. Its verification is distinct from the reported condition: A circuit works for short frames but drops full-size customer frames after stacked VLAN tagging is enabled. The intended segmentation and loop prevention must remain intact.

Question 676

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: An ASM receiver joins a group without selecting one specific sender but engineers search only (S,G) entries. The corrected tree must respect source and group authorization. Which observation proves this requirement has been satisfied?

  1. show pim neighbors lists the expected adjacent router on the planned interface.
  2. show multicast route or PIM state contains the planned source-group combination.
  3. An allowed test group crosses the boundary while a restricted group does not.
  4. The network reports expected (*,G) membership and delivers approved ASM traffic.

Explanation

Correct Answer

D:

For a multimedia training network running Junos multicast routers, the decisive evidence is: The network reports expected (*,G) membership and delivers approved ASM traffic. This validates the action: Verify receiver joins and the relevant shared-tree multicast state toward the RP. Because: Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. The appropriate correction for the reported case is: Verify receiver joins and the relevant shared-tree multicast state toward the RP.

B:

(S,G) multicast state identifies one particular source S and destination group G. Fixing that different mechanism would not address the current root cause: shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources.

C:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Its verification is distinct from the reported condition: An ASM receiver joins a group without selecting one specific sender but engineers search only (S,G) entries. The corrected tree must respect source and group authorization.

Question 677

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: A forwarding class is classified correctly but receives too little bandwidth on a congested interface. The network must keep critical application latency within policy. Which response best restores the intended behavior?

  1. Assign appropriate scheduler transmit-rate settings for the required class and validate link capacity.
  2. Apply a controlled classifier or policer for untrusted ports while trusting only authorized phone or uplink markings.
  3. Apply a suitable RED or weighted drop profile through the appropriate scheduler.
  4. Configure an appropriate constrained high-priority scheduler for the approved real-time class.

Explanation

Correct Answer

A:

For a congested enterprise WAN carrying video, voice and backups, the direct corrective action is: Assign appropriate scheduler transmit-rate settings for the required class and validate link capacity. This addresses the mechanism: Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. Confirm by checking: Queue counters show the intended class receives its planned share during a controlled load. During rollout, check percentages and priority interactions before promising absolute throughput for every burst.

Incorrect Answers

B:

The ingress trust boundary decides whether external markings should be accepted or reclassified. The appropriate correction for the reported case is: Assign appropriate scheduler transmit-rate settings for the required class and validate link capacity.

C:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. Fixing that different mechanism would not address the current root cause: junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities.

D:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Its verification is distinct from the reported condition: A forwarding class is classified correctly but receives too little bandwidth on a congested interface. The network must keep critical application latency within policy.

Question 678

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: A low-latency voice service waits behind large file transfers even when its traffic is correctly classified. The improvement must not starve business traffic. What would demonstrate a successful correction under test?

  1. Packet captures on egress show the agreed DSCP values for representative classes.
  2. Voice queue delay remains within the target while lower classes still receive required service.
  3. A burst is transmitted at a controlled rate without the same avoidable tail drops.
  4. Packets with the approved DSCP values enter the expected forwarding queues.

Explanation

Correct Answer

B:

For a campus switch team configuring Junos egress queues, the decisive evidence is: Voice queue delay remains within the target while lower classes still receive required service. This validates the action: Configure an appropriate constrained high-priority scheduler for the approved real-time class. Because: A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. The appropriate correction for the reported case is: Configure an appropriate constrained high-priority scheduler for the approved real-time class.

C:

Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit. Fixing that different mechanism would not address the current root cause: a scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested.

D:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Its verification is distinct from the reported condition: A low-latency voice service waits behind large file transfers even when its traffic is correctly classified. The improvement must not starve business traffic.

Question 679

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A BGP router has internal routes in its RIB but should advertise only an authorized subset to an external peer. The routing policy must retain intended primary and backup paths. What protocol behavior accounts for this failure?

  1. Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases.
  2. A BGP import policy determines which incoming route advertisements are accepted into the routing table.
  3. BGP export policy controls which eligible active routes the speaker announces to selected neighbors.
  4. Junos BGP best-path logic generally prefers the external route when preceding comparisons tie.

Explanation

Correct Answer

C:

For a dual-homed business network peering with two upstream providers, the governing mechanism is: BGP export policy controls which eligible active routes the speaker announces to selected neighbors. It explains the reported symptom: A BGP router has internal routes in its RIB but should advertise only an authorized subset to an external peer. The intended response is: Apply a narrowly matched export policy for intended prefixes to the relevant BGP group. Verification: The peer receives only the approved announcements and no internal management subnets.

Incorrect Answers

A:

Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. This alternative mechanism does not match the current fault.

B:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. Fixing that different mechanism would not address the current root cause: BGP export policy controls which eligible active routes the speaker announces to selected neighbors.

D:

Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. Its verification is distinct from the reported condition: A BGP router has internal routes in its RIB but should advertise only an authorized subset to an external peer. The routing policy must retain intended primary and backup paths.

Question 680

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The diagnosis must distinguish a healthy BGP session from eligible received routes. Which configuration adjustment should be made first to address this issue?

  1. Inspect the origin attribute and apply policy only if the intended path requires explicit adjustment.
  2. Apply a narrowly matched export policy for intended prefixes to the relevant BGP group.
  3. Configure reasonable warning and hard limits appropriate to each authorized address family.
  4. Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.

Explanation

Correct Answer

D:

For a managed network team troubleshooting an internet edge, the direct corrective action is: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones. This addresses the mechanism: A BGP import policy determines which incoming route advertisements are accepted into the routing table. Confirm by checking: Accepted routes appear in the BGP route table and unwanted routes are rejected or hidden as intended. During rollout, test term ordering and default policy behavior before enabling changes on a production peer.

Incorrect Answers

A:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. The appropriate correction for the reported case is: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.

B:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Fixing that different mechanism would not address the current root cause: a BGP import policy determines which incoming route advertisements are accepted into the routing table.

C:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Its verification is distinct from the reported condition: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests