mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 66

Question 650

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The solution should not give workstation traffic untrusted voice privileges. What requirement most specifically calls for this approach?

  1. Use voice-specific QoS classification on mixed phone and PC ports.
  2. Use dedicated voice VLANs to separate phone and workstation traffic on a shared port.
  3. Use LLDP-MED to signal voice VLAN settings to compatible IP phones.
  4. Use LLDP to discover directly connected Ethernet neighbors.

Explanation

Correct Answer

B:

For a branch introducing an IP telephony access layer, this mechanism fits the requirement: Use dedicated voice VLANs to separate phone and workstation traffic on a shared port. The design is appropriate because: A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. In this scenario, the observed issue is: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The corresponding implementation is: Configure the intended voice VLAN and data VLAN relationship on the shared access connection.

Incorrect Answers

A:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. The appropriate correction for the reported case is: Configure the intended voice VLAN and data VLAN relationship on the shared access connection.

C:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. Fixing that different mechanism would not address the current root cause: a voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.

D:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Its verification is distinct from the reported condition: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The solution should not give workstation traffic untrusted voice privileges.

Question 651

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: Two candidate BGP paths are comparable in earlier attributes but one was learned via eBGP and the other iBGP. The change must not introduce an unwanted autonomous-system route leak. When would the described mechanism be appropriate?

  1. Use correct eBGP AS relationships when forming a session with another routing domain.
  2. Use next-hop self when internal clients cannot route to external BGP next-hop addresses.
  3. Use BGP peer-type preference when explaining late-stage path selection.
  4. Use inet6-unicast BGP family to advertise and receive IPv6 network reachability.

Explanation

Correct Answer

C:

For a large organization using Junos route reflectors, this mechanism fits the requirement: Use BGP peer-type preference when explaining late-stage path selection. The design is appropriate because: Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. In this scenario, the observed issue is: Two candidate BGP paths are comparable in earlier attributes but one was learned via eBGP and the other iBGP. The corresponding implementation is: Review peer type and the complete path decision chain before adjusting selection policy.

Incorrect Answers

A:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. The appropriate correction for the reported case is: Review peer type and the complete path decision chain before adjusting selection policy.

B:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Fixing that different mechanism would not address the current root cause: junos BGP best-path logic generally prefers the external route when preceding comparisons tie.

D:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Its verification is distinct from the reported condition: Two candidate BGP paths are comparable in earlier attributes but one was learned via eBGP and the other iBGP. The change must not introduce an unwanted autonomous-system route leak. When would the described mechanism be appropriate.

Question 652

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: Two routers connected by one Ethernet segment have mismatched OSPF area assignments and never become neighbors. The routing change must preserve control-plane consistency across areas. What verification result should the engineer expect?

  1. Interarea routes appear in expected areas with valid backbone reachability.
  2. show route protocol ospf on another router reveals the advertised external prefix.
  3. Expected transit adjacencies reach Full while eligible non-DR neighbors may remain TwoWay.
  4. The peers reach Full state and show ospf interface reports the planned area on both sides.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, the decisive evidence is: The peers reach Full state and show ospf interface reports the planned area on both sides. This validates the action: Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design. Because: OSPF neighbors on a common link must agree on the area identifier used in Hello processing. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. The appropriate correction for the reported case is: Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design.

B:

Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. Fixing that different mechanism would not address the current root cause: OSPF neighbors on a common link must agree on the area identifier used in Hello processing.

C:

OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. Its verification is distinct from the reported condition: Two routers connected by one Ethernet segment have mismatched OSPF area assignments and never become neighbors. The routing change must preserve control-plane consistency across areas.

Question 653

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A team treats a two-way neighbor state as a complete adjacency on every network type. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which underlying distinction should guide troubleshooting?

  1. OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full.
  2. OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments.
  3. Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB.
  4. OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.

Explanation

Correct Answer

A:

For a regional provider operating Junos-based branch routers, the governing mechanism is: OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. It explains the reported symptom: A team treats a two-way neighbor state as a complete adjacency on every network type. The intended response is: Read network type and DR/BDR election results when interpreting show ospf neighbor. Verification: Expected transit adjacencies reach Full while eligible non-DR neighbors may remain TwoWay.

Incorrect Answers

B:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. This alternative mechanism does not match the current fault.

C:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. Fixing that different mechanism would not address the current root cause: OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full.

D:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. Its verification is distinct from the reported condition: A team treats a two-way neighbor state as a complete adjacency on every network type. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 654

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The routing change must preserve control-plane consistency across areas. For which use case is this feature the best match?

  1. Use OSPF interface costs to prefer one internal path over another.
  2. Use BFD to shorten routing failure detection without relying solely on OSPF dead timers.
  3. Use OSPF point-to-point network type on an isolated two-router link.
  4. Prefer type-1 external metrics where internal distance to the ASBR must influence selection.

Explanation

Correct Answer

B:

For a university separating multiple OSPF areas, this mechanism fits the requirement: Use BFD to shorten routing failure detection without relying solely on OSPF dead timers. The design is appropriate because: Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. In this scenario, the observed issue is: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The corresponding implementation is: Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection.

Incorrect Answers

A:

OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. The appropriate correction for the reported case is: Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection.

C:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. Fixing that different mechanism would not address the current root cause: Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers.

D:

Type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection. Its verification is distinct from the reported condition: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The routing change must preserve control-plane consistency across areas.

Question 655

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A multicast video stream floods every port in a VLAN although only two receivers joined. The group traffic must reach interested receivers without flooding other locations. Which precaution should be checked before committing the change?

  1. Do not confuse IPv6 multicast scope with the IPv4 private addressing range.
  2. Avoid running competing unsupported querier configurations without election planning.
  3. Check querier and router-port discovery so memberships do not age out unexpectedly.
  4. Check IGMPv3 support and SSM address-range policy before switching away from ASM.

Explanation

Correct Answer

C:

For a campus distributing IP video to several buildings, the relevant safeguard is: Check querier and router-port discovery so memberships do not age out unexpectedly. It matters while implementing: Configure supported IGMP snooping and verify a reachable multicast-router port in the receiver VLAN. The fault involves: IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. The required acceptance result remains: Only joined receiver ports receive the test multicast frames during stable operation.

Incorrect Answers

A:

IPv6 multicast destinations begin in the FF00::/8 range and include scope information. The appropriate correction for the reported case is: Check querier and router-port discovery so memberships do not age out unexpectedly.

B:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Fixing that different mechanism would not address the current root cause: IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN.

D:

Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. Its verification is distinct from the reported condition: A multicast video stream floods every port in a VLAN although only two receivers joined. The group traffic must reach interested receivers without flooding other locations.

Question 656

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: An engineer tries to assign a unicast destination to represent a one-to-many IPv4 video channel. The team should test joins and forwarding separately. Which configuration adjustment should be made first to address this issue?

  1. Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic.
  2. Confirm neighbor priorities and configured DR role on the shared segment.
  3. Inspect the source and group state to diagnose the correct sender-specific distribution tree.
  4. Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.

Explanation

Correct Answer

D:

For an enterprise telemetry network with multicast subscribers, the direct corrective action is: Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution. This addresses the mechanism: IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Confirm by checking: Subscribers join the selected multicast group and receive matching test packets. During rollout, avoid using reserved link-local multicast groups for arbitrary enterprise streams.

Incorrect Answers

A:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. The appropriate correction for the reported case is: Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.

B:

PIM designated-router election selects the local router responsible for certain first-hop PIM functions. Fixing that different mechanism would not address the current root cause: IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations.

C:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: An engineer tries to assign a unicast destination to represent a one-to-many IPv4 video channel. The team should test joins and forwarding separately.

Question 657

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: An upstream BGP neighbor must recognize which advertised prefixes belong to a special handling category. The routing policy must retain intended primary and backup paths. Which precaution should be checked before committing the change?

  1. Verify community propagation scope and avoid accepting arbitrary peer tags as trusted authorization.
  2. Do not reuse cluster identifiers carelessly across unrelated reflection domains.
  3. Avoid broad allow-as-in exceptions without a documented multi-AS design.
  4. Avoid inserting a catchall accept before security and route-leak protections.

Explanation

Correct Answer

A:

For a dual-homed business network peering with two upstream providers, the relevant safeguard is: Verify community propagation scope and avoid accepting arbitrary peer tags as trusted authorization. It matters while implementing: Attach a defined community to only the selected prefixes and configure matching remote policy. The fault involves: BGP community attributes carry policy tags that importing or exporting routers can match. The required acceptance result remains: show route extensive or advertised-route output includes the expected community on the intended prefixes.

Incorrect Answers

B:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. The appropriate correction for the reported case is: Verify community propagation scope and avoid accepting arbitrary peer tags as trusted authorization.

C:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. Fixing that different mechanism would not address the current root cause: BGP community attributes carry policy tags that importing or exporting routers can match.

D:

Junos policy terms are evaluated in configured order and a terminating action can end processing early. Its verification is distinct from the reported condition: An upstream BGP neighbor must recognize which advertised prefixes belong to a special handling category. The routing policy must retain intended primary and backup paths.

Question 658

At an enterprise replacing legacy IP handsets, a Junos specialist investigates this scenario: A phone boots on one switch but repeatedly power-cycles when many phones connect to another switch. The team must check phone support and PoE capacity before cutover. Which operational change most directly resolves the observed failure?

  1. Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic.
  2. Verify total PoE capacity and allocate sufficient per-port power for the installed phones.
  3. Enable appropriate PoE class handling and compatible power negotiation for the phone.
  4. Enable supported LLDP on authorized interfaces and inspect neighbor information.

Explanation

Correct Answer

B:

For an enterprise replacing legacy IP handsets, the direct corrective action is: Verify total PoE capacity and allocate sufficient per-port power for the installed phones. This addresses the mechanism: PoE availability depends on available switch power budget and each attached device's negotiated consumption. Confirm by checking: The phone stays powered under a representative simultaneous high-load endpoint test. During rollout, do not exceed chassis supply or line-card power availability based only on per-port ratings.

Incorrect Answers

A:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. The appropriate correction for the reported case is: Verify total PoE capacity and allocate sufficient per-port power for the installed phones.

C:

PoE power classification informs the power source of the powered device's required allocation. Fixing that different mechanism would not address the current root cause: poE availability depends on available switch power budget and each attached device's negotiated consumption.

D:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Its verification is distinct from the reported condition: A phone boots on one switch but repeatedly power-cycles when many phones connect to another switch. The team must check phone support and PoE capacity before cutover.

Question 659

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An OSPF neighbor remains in ExStart or Exchange although basic connectivity and Hellos work. The correction must not expose administrative network prefixes. What risk must the implementation avoid?

  1. Avoid forcing DR changes during production without considering adjacency churn.
  2. Limit logging rate and storage consumption in production while collecting traces.
  3. Do not mask a real MTU mismatch with a blanket interoperability workaround without testing traffic.
  4. Check holes in address allocation and failover behavior before suppressing specifics.

Explanation

Correct Answer

C:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Do not mask a real MTU mismatch with a blanket interoperability workaround without testing traffic. It matters while implementing: Correct the relevant link MTU on both endpoints and restart adjacency safely if necessary. The fault involves: Database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link. The required acceptance result remains: The neighbor leaves ExStart and reaches Full with synchronized link-state databases.

Incorrect Answers

A:

On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. The appropriate correction for the reported case is: Do not mask a real MTU mismatch with a blanket interoperability workaround without testing traffic.

B:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Fixing that different mechanism would not address the current root cause: database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link.

D:

An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. Its verification is distinct from the reported condition: An OSPF neighbor remains in ExStart or Exchange although basic connectivity and Hellos work. The correction must not expose administrative network prefixes.

Question 660

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The chosen route must have a valid data-plane next hop. What protocol behavior accounts for this failure?

  1. Junos BGP best-path logic generally prefers the external route when preceding comparisons tie.
  2. BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship.
  3. Route reflector cluster identifiers participate in loop detection on reflected BGP paths.
  4. Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases.

Explanation

Correct Answer

D:

For an enterprise core exchanging BGP routes over redundant WAN paths, the governing mechanism is: Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. It explains the reported symptom: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The intended response is: Enable advertise-inactive only for the intentional peer context and test its effect. Verification: The neighbor receives the required BGP route despite a competing active non-BGP route.

Incorrect Answers

A:

Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. This alternative mechanism does not match the current fault.

B:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Fixing that different mechanism would not address the current root cause: junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases.

C:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. Its verification is distinct from the reported condition: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The chosen route must have a valid data-plane next hop.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests