mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 65

Question 640

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: Many VLANs should share a small number of spanning-tree topologies but currently use separate inconsistent path designs. The service must preserve tags without bridging unrelated tenants. What is the most appropriate correction to implement?

  1. Set the intended VLAN membership on the access logical interface and verify the port mode.
  2. Configure the intended ethernet-switching family and interface mode at supported hierarchy.
  3. Configure the gateway-facing port with proper promiscuous association for the private VLAN topology.
  4. Assign the appropriate VLANs to the intended MST instances and set designated roots.

Explanation

Correct Answer

D:

For a provider Ethernet network carrying customer Layer 2 services, the direct corrective action is: Assign the appropriate VLANs to the intended MST instances and set designated roots. This addresses the mechanism: Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances. Confirm by checking: show spanning-tree interface reports the planned instance port roles for each mapped VLAN. During rollout, check instance-to-VLAN mapping agreement across every switch in the region.

Incorrect Answers

A:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. The appropriate correction for the reported case is: Assign the appropriate VLANs to the intended MST instances and set designated roots.

B:

Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. Fixing that different mechanism would not address the current root cause: Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances.

C:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. Its verification is distinct from the reported condition: Many VLANs should share a small number of spanning-tree topologies but currently use separate inconsistent path designs. The service must preserve tags without bridging unrelated tenants.

Question 641

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: A downstream user workstation marks backup traffic as high priority and competes with voice in the protected queue. The network must keep critical application latency within policy. Which precaution should be checked before committing the change?

  1. Do not trust arbitrary endpoint DSCP values simply because a VLAN tag is present.
  2. Do not infer an absence of congestion from a low five-minute average utilization value alone.
  3. Account for added buffer delay and do not overshape real-time voice streams.
  4. Control priority traffic volume to avoid starving all other egress queues.

Explanation

Correct Answer

A:

For a congested enterprise WAN carrying video, voice and backups, the relevant safeguard is: Do not trust arbitrary endpoint DSCP values simply because a VLAN tag is present. It matters while implementing: Apply a controlled classifier or policer for untrusted ports while trusting only authorized phone or uplink markings. The fault involves: The ingress trust boundary decides whether external markings should be accepted or reclassified. The required acceptance result remains: The workstation's spoofed expedited marking is reset and voice retains the intended priority.

Incorrect Answers

B:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. The appropriate correction for the reported case is: Do not trust arbitrary endpoint DSCP values simply because a VLAN tag is present.

C:

Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit. Fixing that different mechanism would not address the current root cause: the ingress trust boundary decides whether external markings should be accepted or reclassified.

D:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Its verification is distinct from the reported condition: A downstream user workstation marks backup traffic as high priority and competes with voice in the protected queue. The network must keep critical application latency within policy.

Question 642

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. Classification and downstream remarking must not be confused. Which configuration adjustment should be made first to address this issue?

  1. Attach the appropriate DSCP BA classifier to the trusted ingress interface.
  2. Create a narrowly matched classifier filter and apply it at the correct ingress logical interface.
  3. Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification.
  4. Inspect Junos interface queue statistics and correlate drops with traffic class and times.

Explanation

Correct Answer

B:

For a financial services network enforcing trusted DSCP markings, the direct corrective action is: Create a narrowly matched classifier filter and apply it at the correct ingress logical interface. This addresses the mechanism: A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Confirm by checking: A representative phone flow enters the chosen forwarding class while ordinary traffic remains best effort. During rollout, review fragment behavior and protocol matches before relying on broad address-only conditions.

Incorrect Answers

A:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. The appropriate correction for the reported case is: Create a narrowly matched classifier filter and apply it at the correct ingress logical interface.

C:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. Fixing that different mechanism would not address the current root cause: a multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class.

D:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. Its verification is distinct from the reported condition: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. Classification and downstream remarking must not be confused.

Question 643

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A static route is present in the local Junos routing table but other OSPF routers never learn it. The correction must not expose administrative network prefixes. What risk must the implementation avoid?

  1. Avoid originating a default to a dead WAN without route tracking or failover planning.
  2. Verify IPv6 link-local interface reachability and security filters before assuming IPv4 OSPF proves readiness.
  3. Do not redistribute every static route or default route without an approved prefix filter.
  4. Do not remove required link-local communication while tightening IPv6 filters.

Explanation

Correct Answer

C:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Do not redistribute every static route or default route without an approved prefix filter. It matters while implementing: Create a tightly scoped policy matching the intended static prefix and apply it as an OSPF export policy. The fault involves: Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. The required acceptance result remains: show route protocol ospf on another router reveals the advertised external prefix.

Incorrect Answers

A:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. The appropriate correction for the reported case is: Do not redistribute every static route or default route without an approved prefix filter.

B:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Fixing that different mechanism would not address the current root cause: junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability.

D:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Its verification is distinct from the reported condition: A static route is present in the local Junos routing table but other OSPF routers never learn it. The correction must not expose administrative network prefixes.

Question 644

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: A trunk receives correctly PCP-tagged Ethernet frames but their Layer 2 priority is ignored at the receiving switch. The improvement must not starve business traffic. Which technical mechanism most directly explains the symptom?

  1. Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit.
  2. Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure.
  3. A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.
  4. IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification.

Explanation

Correct Answer

D:

For a campus switch team configuring Junos egress queues, the governing mechanism is: IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. It explains the reported symptom: A trunk receives correctly PCP-tagged Ethernet frames but their Layer 2 priority is ignored at the receiving switch. The intended response is: Apply an appropriate IEEE 802.1p classifier on the trusted tagged ingress port. Verification: A capture and queue counters show tagged priority values mapped to the expected classes.

Incorrect Answers

A:

Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit. This alternative mechanism does not match the current fault.

B:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. Fixing that different mechanism would not address the current root cause: IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification.

C:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Its verification is distinct from the reported condition: A trunk receives correctly PCP-tagged Ethernet frames but their Layer 2 priority is ignored at the receiving switch. The improvement must not starve business traffic.

Question 645

At a new office connecting VoIP phones to EX access switches, a Junos specialist investigates this scenario: A newly connected desk phone remains in the data VLAN although the switch has a dedicated tagged voice VLAN. The rollout must support phones and connected workstations securely. Which underlying distinction should guide troubleshooting?

  1. LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones.
  2. An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior.
  3. Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions.
  4. A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.

Explanation

Correct Answer

A:

For a new office connecting VoIP phones to EX access switches, the governing mechanism is: LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. It explains the reported symptom: A newly connected desk phone remains in the data VLAN although the switch has a dedicated tagged voice VLAN. The intended response is: Publish the intended LLDP-MED voice network policy on the switch access port. Verification: The phone adopts the approved voice VLAN tag and registers using the expected voice network.

Incorrect Answers

B:

An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior. This alternative mechanism does not match the current fault.

C:

Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. Fixing that different mechanism would not address the current root cause: LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones.

D:

A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. Its verification is distinct from the reported condition: A newly connected desk phone remains in the data VLAN although the switch has a dedicated tagged voice VLAN. The rollout must support phones and connected workstations securely.

Question 646

At a hospital onboarding diverse employee devices, a Junos specialist investigates this scenario: A switch port configured for 802.1X, MAC RADIUS and captive portal grants unexpected access because the fallback sequence is misunderstood. Critical permitted endpoints need a documented authentication fallback. Which response best restores the intended behavior?

  1. Verify switch-side RADIUS connectivity and authenticator configuration rather than redirecting the client to the server.
  2. Inspect and configure the supported 802.1X then MAC RADIUS then portal method order for that port.
  3. Configure supported dot1x authenticator and RADIUS settings and verify valid supplicant credentials.
  4. Configure supported server-reject access behavior and a restricted reject VLAN policy.

Explanation

Correct Answer

B:

For a hospital onboarding diverse employee devices, the direct corrective action is: Inspect and configure the supported 802.1X then MAC RADIUS then portal method order for that port. This addresses the mechanism: Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. Confirm by checking: Each simulated endpoint type follows the correct method and receives its matching access policy. During rollout, test device and Junos release support before assuming every simultaneous combination is available.

Incorrect Answers

A:

In common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server. The appropriate correction for the reported case is: Inspect and configure the supported 802.1X then MAC RADIUS then portal method order for that port.

C:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Fixing that different mechanism would not address the current root cause: multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response.

D:

A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. Its verification is distinct from the reported condition: A switch port configured for 802.1X, MAC RADIUS and captive portal grants unexpected access because the fallback sequence is misunderstood. Critical permitted endpoints need a documented authentication fallback.

Question 647

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A BGP neighbor is configured correctly but remains in Connect or Active state across a protected interconnect. The diagnosis must distinguish a healthy BGP session from eligible received routes. What risk must the implementation avoid?

  1. Avoid broad allow-as-in exceptions without a documented multi-AS design.
  2. Do not claim origin always wins over local preference or AS-path length.
  3. Restrict BGP port access to approved neighbors rather than exposing it globally.
  4. Validate route reachability to the peer loopback before changing route policy.

Explanation

Correct Answer

C:

For a managed network team troubleshooting an internet edge, the relevant safeguard is: Restrict BGP port access to approved neighbors rather than exposing it globally. It matters while implementing: Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect. The fault involves: BGP depends on a reachable TCP transport path, normally using destination port 179. The required acceptance result remains: The neighbor establishes its TCP session and BGP state changes to Established.

Incorrect Answers

A:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. The appropriate correction for the reported case is: Restrict BGP port access to approved neighbors rather than exposing it globally.

B:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. Fixing that different mechanism would not address the current root cause: BGP depends on a reachable TCP transport path, normally using destination port 179.

D:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Its verification is distinct from the reported condition: A BGP neighbor is configured correctly but remains in Connect or Active state across a protected interconnect. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 648

At a corporate campus enforcing wired network access, a Junos specialist investigates this scenario: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. Unknown endpoints must not gain access to protected internal VLANs. What protocol behavior accounts for this failure?

  1. A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it.
  2. Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable.
  3. 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access.
  4. A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN.

Explanation

Correct Answer

D:

For a corporate campus enforcing wired network access, the governing mechanism is: A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. It explains the reported symptom: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The intended response is: Configure supported server-reject access behavior and a restricted reject VLAN policy. Verification: The wrong-credential test client reaches only the intended reject services and not protected LANs.

Incorrect Answers

A:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. This alternative mechanism does not match the current fault.

B:

Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. Fixing that different mechanism would not address the current root cause: a RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN.

C:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Its verification is distinct from the reported condition: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. Unknown endpoints must not gain access to protected internal VLANs.

Question 649

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: An ASM receiver joins G but routers disagree about the RP responsible for the group. The team should test joins and forwarding separately. Which operational result would most clearly confirm the fix?

  1. show pim rps reports the planned RP and receivers join the corresponding tree.
  2. A receiver can join G and obtain traffic from an approved discovered sender.
  3. show igmp group lists the expected joined group and its receiving interface.
  4. show msdp source-active shows a known source and receivers on the other RP reach it.

Explanation

Correct Answer

A:

For an enterprise telemetry network with multicast subscribers, the decisive evidence is: show pim rps reports the planned RP and receivers join the corresponding tree. This validates the action: Configure or correct the intended RP mapping for the affected group range throughout the domain. Because: PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. The appropriate correction for the reported case is: Configure or correct the intended RP mapping for the affected group range throughout the domain.

C:

IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. Fixing that different mechanism would not address the current root cause: PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs.

D:

Multicast Source Discovery Protocol communicates source-active information between supported RPs. Its verification is distinct from the reported condition: An ASM receiver joins G but routers disagree about the RP responsible for the group. The team should test joins and forwarding separately.

Question 650

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The solution should not give workstation traffic untrusted voice privileges. What requirement most specifically calls for this approach?

  1. Use voice-specific QoS classification on mixed phone and PC ports.
  2. Use dedicated voice VLANs to separate phone and workstation traffic on a shared port.
  3. Use LLDP-MED to signal voice VLAN settings to compatible IP phones.
  4. Use LLDP to discover directly connected Ethernet neighbors.

Explanation

Correct Answer

B:

For a branch introducing an IP telephony access layer, this mechanism fits the requirement: Use dedicated voice VLANs to separate phone and workstation traffic on a shared port. The design is appropriate because: A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. In this scenario, the observed issue is: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The corresponding implementation is: Configure the intended voice VLAN and data VLAN relationship on the shared access connection.

Incorrect Answers

A:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. The appropriate correction for the reported case is: Configure the intended voice VLAN and data VLAN relationship on the shared access connection.

C:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. Fixing that different mechanism would not address the current root cause: a voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.

D:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Its verification is distinct from the reported condition: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The solution should not give workstation traffic untrusted voice privileges.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests