mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 4

Question 30

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: A virtual machine moves between leaf switches but stale remote MAC advertisements keep traffic on the old VTEP. The engineer must verify both BGP EVPN signaling and underlay reachability. What is the most appropriate correction to implement?

  1. Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability.
  2. Verify advertisement and processing of the relevant MAC mobility extended community or sequence information.
  3. Enable a supported EVPN BGP signaling relationship with the intended route targets and instances.
  4. Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance.

Explanation

Correct Answer

B:

For a service provider offering isolated VXLAN services, the direct corrective action is: Verify advertisement and processing of the relevant MAC mobility extended community or sequence information. This addresses the mechanism: EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. Confirm by checking: Remote leaves update the affected MAC destination to the new VTEP after the controlled move. During rollout, check duplicate-MAC protection to avoid interpreting a persistent Layer 2 loop as legitimate mobility.

Incorrect Answers

A:

VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. The appropriate correction for the reported case is: Verify advertisement and processing of the relevant MAC mobility extended community or sequence information.

C:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. Fixing that different mechanism would not address the current root cause: EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location.

D:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Its verification is distinct from the reported condition: A virtual machine moves between leaf switches but stale remote MAC advertisements keep traffic on the old VTEP. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 31

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The routing policy must retain intended primary and backup paths. Which underlying distinction should guide troubleshooting?

  1. A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint.
  2. Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection.
  3. Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules.
  4. BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged.

Explanation

Correct Answer

C:

For a dual-homed business network peering with two upstream providers, the governing mechanism is: Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. It explains the reported symptom: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The intended response is: Evaluate and apply a supported carefully scoped damping policy only where warranted. Verification: An intentionally unstable test route shows expected damping and eventual reuse after stability.

Incorrect Answers

A:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. This alternative mechanism does not match the current fault.

B:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules.

D:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Its verification is distinct from the reported condition: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The routing policy must retain intended primary and backup paths.

Question 32

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: Users report poor application performance but staff rely solely on interface utilization and ignore per-queue drops. The improvement must not starve business traffic. Which configuration adjustment should be made first to address this issue?

  1. Apply an appropriate IEEE 802.1p classifier on the trusted tagged ingress port.
  2. Create a narrowly matched classifier filter and apply it at the correct ingress logical interface.
  3. Fix the relevant ingress classifier or multifield policy rather than only rewriting outgoing DSCP.
  4. Inspect Junos interface queue statistics and correlate drops with traffic class and times.

Explanation

Correct Answer

D:

For a campus switch team configuring Junos egress queues, the direct corrective action is: Inspect Junos interface queue statistics and correlate drops with traffic class and times. This addresses the mechanism: Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. Confirm by checking: A representative load shows which class drops packets and the verified correction reduces them. During rollout, do not infer an absence of congestion from a low five-minute average utilization value alone.

Incorrect Answers

A:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. The appropriate correction for the reported case is: Inspect Junos interface queue statistics and correlate drops with traffic class and times.

B:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Fixing that different mechanism would not address the current root cause: per-queue counters reveal forwarding class use, transmission and discard behavior during congestion.

C:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Its verification is distinct from the reported condition: Users report poor application performance but staff rely solely on interface utilization and ignore per-queue drops. The improvement must not starve business traffic.

Question 33

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A route is visible locally but network engineers confuse accepting it into a RIB with advertising it as a new OSPF external LSA. The routing change must preserve control-plane consistency across areas. What is the most likely design-related cause?

  1. Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects.
  2. OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits.
  3. Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers.
  4. Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.

Explanation

Correct Answer

A:

For a university separating multiple OSPF areas, the governing mechanism is: Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. It explains the reported symptom: A route is visible locally but network engineers confuse accepting it into a RIB with advertising it as a new OSPF external LSA. The intended response is: Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements. Verification: The intended external LSA appears only after the correct export policy is active.

Incorrect Answers

B:

OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. This alternative mechanism does not match the current fault.

C:

Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. Fixing that different mechanism would not address the current root cause: junos OSPF export governs eligible external route origination while import filtering has different route-selection effects.

D:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Its verification is distinct from the reported condition: A route is visible locally but network engineers confuse accepting it into a RIB with advertising it as a new OSPF external LSA. The routing change must preserve control-plane consistency across areas.

Question 34

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The team should test joins and forwarding separately. Which operational change most directly resolves the observed failure?

  1. Apply explicit multicast scope or PIM routing policy at the relevant domain boundary.
  2. Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports.
  3. Enable the supported SPT behavior and verify source-directed joins where appropriate.
  4. Design a suitable ASM group with functioning IGMP membership and rendezvous-point information.

Explanation

Correct Answer

B:

For an enterprise telemetry network with multicast subscribers, the direct corrective action is: Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports. This addresses the mechanism: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. Confirm by checking: show igmp group lists the expected joined group and its receiving interface. During rollout, do not assume PIM neighbor formation proves that hosts sent IGMP membership.

Incorrect Answers

A:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. The appropriate correction for the reported case is: Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports.

C:

PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. Fixing that different mechanism would not address the current root cause: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router.

D:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. Its verification is distinct from the reported condition: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The team should test joins and forwarding separately.

Question 35

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A switch's MSTP region connects to a different spanning-tree domain and path selection behaves unexpectedly. The proposed behavior must be validated on actual switching ports. What would demonstrate a successful correction under test?

  1. Both VLANs pass tagged frames and switch VLAN membership reports the intended trunk.
  2. The aggregate reports active members and traffic survives loss of one constituent link.
  3. Root and port states remain stable on both sides during controlled link transitions.
  4. Operational state shows common region information and expected instance boundaries.

Explanation

Correct Answer

C:

For a data-center access fabric using tagged trunks, the decisive evidence is: Root and port states remain stable on both sides during controlled link transitions. This validates the action: Inspect boundary-port roles and configure supported interoperation at the domain edge. Because: MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN. The appropriate correction for the reported case is: Inspect boundary-port roles and configure supported interoperation at the domain edge.

B:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. Fixing that different mechanism would not address the current root cause: MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior.

D:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. Its verification is distinct from the reported condition: A switch's MSTP region connects to a different spanning-tree domain and path selection behaves unexpectedly. The proposed behavior must be validated on actual switching ports.

Question 36

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A BGP update is received but appears hidden because the announced next-hop address cannot be resolved in the routing table. The change must not introduce an unwanted autonomous-system route leak. Which underlying distinction should guide troubleshooting?

  1. BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete.
  2. iBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it.
  3. BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system.
  4. A usable BGP route requires an eligible reachable forwarding next hop before it can become active.

Explanation

Correct Answer

D:

For a large organization using Junos route reflectors, the governing mechanism is: A usable BGP route requires an eligible reachable forwarding next hop before it can become active. It explains the reported symptom: A BGP update is received but appears hidden because the announced next-hop address cannot be resolved in the routing table. The intended response is: Repair the underlay route to the received BGP next hop or apply a deliberate next-hop policy. Verification: show route hidden detail no longer reports an unreachable next hop and the prefix becomes eligible.

Incorrect Answers

A:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. This alternative mechanism does not match the current fault.

B:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Fixing that different mechanism would not address the current root cause: a usable BGP route requires an eligible reachable forwarding next hop before it can become active.

C:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. Its verification is distinct from the reported condition: A BGP update is received but appears hidden because the announced next-hop address cannot be resolved in the routing table. The change must not introduce an unwanted autonomous-system route leak.

Question 37

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An OSPF connection on a shared segment must reject unauthorized routing speakers. The routing change must preserve control-plane consistency across areas. Which design objective is best served by this mechanism?

  1. Use OSPF authentication to control trusted routing neighbors on supported links.
  2. Use OSPF export policy to originate selected external routes from an ASBR.
  3. Use OSPF LSDB inspection before changing unrelated next-hop forwarding settings.
  4. Use OSPFv3 for link-state routing of eligible IPv6 enterprise prefixes.

Explanation

Correct Answer

A:

For a university separating multiple OSPF areas, this mechanism fits the requirement: Use OSPF authentication to control trusted routing neighbors on supported links. The design is appropriate because: OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. In this scenario, the observed issue is: An OSPF connection on a shared segment must reject unauthorized routing speakers. The corresponding implementation is: Enable a compatible supported authentication method and matching keys for both authorized peers.

Incorrect Answers

B:

Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. The appropriate correction for the reported case is: Enable a compatible supported authentication method and matching keys for both authorized peers.

C:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. Fixing that different mechanism would not address the current root cause: OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.

D:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Its verification is distinct from the reported condition: An OSPF connection on a shared segment must reject unauthorized routing speakers. The routing change must preserve control-plane consistency across areas.

Question 38

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: A busy output queue suffers severe tail drop and interactive applications need controlled early loss behavior. The improvement must not starve business traffic. Which operational result would most clearly confirm the fix?

  1. Queue statistics show traffic entering different forwarding classes during a congestion test.
  2. Congestion tests show the intended early-drop curve without unbounded queue growth.
  3. A representative phone flow enters the chosen forwarding class while ordinary traffic remains best effort.
  4. Interface queue statistics reflect the configured scheduler allocation under test.

Explanation

Correct Answer

B:

For a campus switch team configuring Junos egress queues, the decisive evidence is: Congestion tests show the intended early-drop curve without unbounded queue growth. This validates the action: Apply a suitable RED or weighted drop profile through the appropriate scheduler. Because: A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. The appropriate correction for the reported case is: Apply a suitable RED or weighted drop profile through the appropriate scheduler.

C:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Fixing that different mechanism would not address the current root cause: a Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion.

D:

A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. Its verification is distinct from the reported condition: A busy output queue suffers severe tail drop and interactive applications need controlled early loss behavior. The improvement must not starve business traffic.

Question 39

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: A switch interconnect passes one VLAN but drops frames for a second authorized VLAN. The change must retain both link resilience and correct VLAN isolation. Which operational change most directly resolves the observed failure?

  1. Enable a consistent MSTP topology and verify the expected alternate-port state.
  2. Enable the supported BPDU protection behavior on designated host-facing ports.
  3. Configure the required VLAN members on both ends of the tagged trunk.
  4. Set the intended VLAN membership on the access logical interface and verify the port mode.

Explanation

Correct Answer

C:

For a large enterprise updating redundant switch links, the direct corrective action is: Configure the required VLAN members on both ends of the tagged trunk. This addresses the mechanism: An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN. Confirm by checking: Both VLANs pass tagged frames and switch VLAN membership reports the intended trunk. During rollout, avoid permitting all VLANs indiscriminately and confirm native VLAN assumptions.

Incorrect Answers

A:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. The appropriate correction for the reported case is: Configure the required VLAN members on both ends of the tagged trunk.

B:

BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. Fixing that different mechanism would not address the current root cause: An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN.

D:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: A switch interconnect passes one VLAN but drops frames for a second authorized VLAN. The change must retain both link resilience and correct VLAN isolation.

Question 40

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The design must avoid forwarding loops during failover. What risk must the implementation avoid?

  1. Check duplicate-MAC protection to avoid interpreting a persistent Layer 2 loop as legitimate mobility.
  2. Verify IRB and route-target configuration and avoid leaking unrelated tenant subnets.
  3. Avoid reusing one VNI for unrelated tenant isolation boundaries.
  4. Verify platform and release-specific EVPN support rather than enabling every address family indiscriminately.

Explanation

Correct Answer

D:

For a multihomed data center using redundant Ethernet segments, the relevant safeguard is: Verify platform and release-specific EVPN support rather than enabling every address family indiscriminately. It matters while implementing: Enable a supported EVPN BGP signaling relationship with the intended route targets and instances. The fault involves: EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. The required acceptance result remains: show route table BGP.evpn.0 or equivalent EVPN table contains valid remote routes.

Incorrect Answers

A:

EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. The appropriate correction for the reported case is: Verify platform and release-specific EVPN support rather than enabling every address family indiscriminately.

B:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Fixing that different mechanism would not address the current root cause: EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information.

C:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Its verification is distinct from the reported condition: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The design must avoid forwarding loops during failover.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests