mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 59

Question 580

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The switch must distinguish identity failures from absent authentication responses. For which use case is this feature the best match?

  1. Use server-fail policy for planned authorization behavior during authentication-server outages.
  2. Use a guest VLAN for limited access by suitable non-802.1X devices.
  3. Use ordered multi-method access authentication for mixed enterprise endpoints.
  4. Use a reject VLAN to distinguish failed authentication from nonresponsive guest devices.

Explanation

Correct Answer

D:

For a managed office network with printers and laptops, this mechanism fits the requirement: Use a reject VLAN to distinguish failed authentication from nonresponsive guest devices. The design is appropriate because: A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. In this scenario, the observed issue is: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The corresponding implementation is: Configure supported server-reject access behavior and a restricted reject VLAN policy.

Incorrect Answers

A:

Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. The appropriate correction for the reported case is: Configure supported server-reject access behavior and a restricted reject VLAN policy.

B:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Fixing that different mechanism would not address the current root cause: a RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN.

C:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. Its verification is distinct from the reported condition: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The switch must distinguish identity failures from absent authentication responses.

Question 581

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The engineer must verify both BGP EVPN signaling and underlay reachability. Which underlying distinction should guide troubleshooting?

  1. VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames.
  2. VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context.
  3. EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.
  4. EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment.

Explanation

Correct Answer

A:

For a service provider offering isolated VXLAN services, the governing mechanism is: VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. It explains the reported symptom: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The intended response is: Provide sufficient underlay MTU for the intended inner payload or constrain end-host MTU safely. Verification: A maximum-size approved test payload crosses the VXLAN tunnel without fragmentation-related failure.

Incorrect Answers

B:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. This alternative mechanism does not match the current fault.

C:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Fixing that different mechanism would not address the current root cause: VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames.

D:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Its verification is distinct from the reported condition: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 582

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: Two equal eligible BGP paths exist but the forwarding table installs only one next hop. The change must not introduce an unwanted autonomous-system route leak. For which use case is this feature the best match?

  1. Use four-octet AS number support when peering with modern high-numbered ASes.
  2. Use BGP multipath to share traffic over compatible equal-preference paths.
  3. Use BGP communities to classify groups of prefixes for routing policy.
  4. Use BGP neighbor authentication to harden trusted peer sessions.

Explanation

Correct Answer

B:

For a large organization using Junos route reflectors, this mechanism fits the requirement: Use BGP multipath to share traffic over compatible equal-preference paths. The design is appropriate because: BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. In this scenario, the observed issue is: Two equal eligible BGP paths exist but the forwarding table installs only one next hop. The corresponding implementation is: Configure supported multipath and forwarding next-hop behavior for truly equivalent paths.

Incorrect Answers

A:

BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. The appropriate correction for the reported case is: Configure supported multipath and forwarding next-hop behavior for truly equivalent paths.

C:

BGP community attributes carry policy tags that importing or exporting routers can match. Fixing that different mechanism would not address the current root cause: BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support.

D:

Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. Its verification is distinct from the reported condition: Two equal eligible BGP paths exist but the forwarding table installs only one next hop. The change must not introduce an unwanted autonomous-system route leak.

Question 583

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A unicast frame is flooded across a VLAN because the switch lacks a destination MAC entry. The service must preserve tags without bridging unrelated tenants. Which operational result would most clearly confirm the fix?

  1. Each VLAN shows the intended root and blocked ports without creating a loop.
  2. A simulated BPDU loss creates a protected state without allowing a loop.
  3. show ethernet-switching table contains the expected MAC-to-port entry and forwarding becomes selective.
  4. The aggregate reports active members and traffic survives loss of one constituent link.

Explanation

Correct Answer

C:

For a provider Ethernet network carrying customer Layer 2 services, the decisive evidence is: show ethernet-switching table contains the expected MAC-to-port entry and forwarding becomes selective. This validates the action: Verify MAC learning and the relevant source port/VLAN association. Because: Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. The appropriate correction for the reported case is: Verify MAC learning and the relevant source port/VLAN association.

B:

Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. Fixing that different mechanism would not address the current root cause: layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables.

D:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. Its verification is distinct from the reported condition: A unicast frame is flooded across a VLAN because the switch lacks a destination MAC entry. The service must preserve tags without bridging unrelated tenants.

Question 584

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: An employee connects a corporate laptop but the switch keeps the port unauthorized even though the IP network is functional. The switch must distinguish identity failures from absent authentication responses. What risk must the implementation avoid?

  1. Do not confuse a server timeout with an explicit Access-Reject or permit a broad uncontrolled bypass.
  2. Protect shared secrets and ensure the RADIUS server permits the correct switch as a client.
  3. Treat MAC addresses as spoofable and pair this method with restrictive network segmentation.
  4. Preserve break-glass and management paths when enabling access control on an active switch.

Explanation

Correct Answer

D:

For a managed office network with printers and laptops, the relevant safeguard is: Preserve break-glass and management paths when enabling access control on an active switch. It matters while implementing: Configure supported dot1x authenticator and RADIUS settings and verify valid supplicant credentials. The fault involves: 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. The required acceptance result remains: An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state.

Incorrect Answers

A:

Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. The appropriate correction for the reported case is: Preserve break-glass and management paths when enabling access control on an active switch.

B:

In common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server. Fixing that different mechanism would not address the current root cause: 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access.

C:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. Its verification is distinct from the reported condition: An employee connects a corporate laptop but the switch keeps the port unauthorized even though the IP network is functional. The switch must distinguish identity failures from absent authentication responses.

Question 585

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: A new ASM sender transmits but remote receivers never learn about the source through their RP. The corrected tree must respect source and group authorization. Which operational result would most clearly confirm the fix?

  1. The RP learns the source and joined downstream receivers begin receiving the stream.
  2. Only joined receiver ports receive the test multicast frames during stable operation.
  3. The unneeded branch ages out or prunes while other receiver branches remain active.
  4. show multicast route or PIM state contains the planned source-group combination.

Explanation

Correct Answer

A:

For a multimedia training network running Junos multicast routers, the decisive evidence is: The RP learns the source and joined downstream receivers begin receiving the stream. This validates the action: Verify source-facing PIM DR behavior and reachability to the correct rendezvous point. Because: In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. The appropriate correction for the reported case is: Verify source-facing PIM DR behavior and reachability to the correct rendezvous point.

C:

PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes. Fixing that different mechanism would not address the current root cause: in PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: A new ASM sender transmits but remote receivers never learn about the source through their RP. The corrected tree must respect source and group authorization.

Question 586

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: A tenant requires only one active forwarding attachment at a time but both dual-homed PEs transmit simultaneously. The overlay must relearn host reachability without stale tunnel selection. Which configuration adjustment should be made first to address this issue?

  1. Enable a supported EVPN BGP signaling relationship with the intended route targets and instances.
  2. Select a supported single-active multihoming design and check ESI and DF behavior.
  3. Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance.
  4. Configure supported all-active Ethernet segment multihoming and consistent ESI state.

Explanation

Correct Answer

B:

For an enterprise migrating virtual machines between racks, the direct corrective action is: Select a supported single-active multihoming design and check ESI and DF behavior. This addresses the mechanism: EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. Confirm by checking: Only the elected active side forwards tenant traffic until controlled failover. During rollout, coordinate access-side LAG and platform semantics before mixing single-active and all-active policies.

Incorrect Answers

A:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. The appropriate correction for the reported case is: Select a supported single-active multihoming design and check ESI and DF behavior.

C:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Fixing that different mechanism would not address the current root cause: EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE.

D:

EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention. Its verification is distinct from the reported condition: A tenant requires only one active forwarding attachment at a time but both dual-homed PEs transmit simultaneously. The overlay must relearn host reachability without stale tunnel selection.

Question 587

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The routing change must preserve control-plane consistency across areas. What is the most appropriate correction to implement?

  1. Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design.
  2. Configure a compatible stub-area type throughout the area and validate ABR default behavior.
  3. Compare show ospf database and LSAs against the intended origin and area boundaries.
  4. Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.

Explanation

Correct Answer

C:

For a university separating multiple OSPF areas, the direct corrective action is: Compare show ospf database and LSAs against the intended origin and area boundaries. This addresses the mechanism: The link-state database and area LSA contents determine which routes the OSPF calculation can derive. Confirm by checking: The missing prefix is visible in an appropriate LSA and the downstream route becomes active. During rollout, separate advertisement failures from policy and forwarding installation faults.

Incorrect Answers

A:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. The appropriate correction for the reported case is: Compare show ospf database and LSAs against the intended origin and area boundaries.

B:

A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. Fixing that different mechanism would not address the current root cause: the link-state database and area LSA contents determine which routes the OSPF calculation can derive.

D:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Its verification is distinct from the reported condition: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The routing change must preserve control-plane consistency across areas.

Question 588

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The diagnosis must distinguish a healthy BGP session from eligible received routes. Which operational result would most clearly confirm the fix?

  1. A policy test or advertised-route output confirms restricted prefixes are no longer accepted.
  2. show route extensive or advertised-route output includes the expected community on the intended prefixes.
  3. The cooperating neighbor selects the intended ingress for otherwise matching routes.
  4. The neighbor receives the required BGP route despite a competing active non-BGP route.

Explanation

Correct Answer

D:

For a managed network team troubleshooting an internet edge, the decisive evidence is: The neighbor receives the required BGP route despite a competing active non-BGP route. This validates the action: Enable advertise-inactive only for the intentional peer context and test its effect. Because: Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos policy terms are evaluated in configured order and a terminating action can end processing early. The appropriate correction for the reported case is: Enable advertise-inactive only for the intentional peer context and test its effect.

B:

BGP community attributes carry policy tags that importing or exporting routers can match. Fixing that different mechanism would not address the current root cause: junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases.

C:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Its verification is distinct from the reported condition: A valid BGP path is present but a more preferred static route prevents that BGP path from being advertised. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 589

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: An enterprise wants to protect a BGP session from a spoofed adjacent TCP peer. The chosen route must have a valid data-plane next hop. Which configuration adjustment should be made first to address this issue?

  1. Enable matching supported BGP authentication keys on both sides and test staged replacement.
  2. Configure supported multipath and forwarding next-hop behavior for truly equivalent paths.
  3. Configure the approved internal BGP group with correct peer addresses and peer AS membership.
  4. Configure the correct complete AS value on both peers using supported BGP capability negotiation.

Explanation

Correct Answer

A:

For an enterprise core exchanging BGP routes over redundant WAN paths, the direct corrective action is: Enable matching supported BGP authentication keys on both sides and test staged replacement. This addresses the mechanism: Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. Confirm by checking: The authorized peer establishes while a test using incorrect credentials is refused. During rollout, coordinate secret rotations to avoid synchronized loss of redundant sessions.

Incorrect Answers

B:

BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. The appropriate correction for the reported case is: Enable matching supported BGP authentication keys on both sides and test staged replacement.

C:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Fixing that different mechanism would not address the current root cause: compatible TCP-level BGP authentication methods can verify the configured neighbor relationship.

D:

BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. Its verification is distinct from the reported condition: An enterprise wants to protect a BGP session from a spoofed adjacent TCP peer. The chosen route must have a valid data-plane next hop.

Question 590

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Two parallel switch uplinks form a Layer 2 loop because they were attached without a compatible aggregation design. The change must retain both link resilience and correct VLAN isolation. Which response best restores the intended behavior?

  1. Assign distinct outer service VLAN identities to the independent customer services.
  2. Configure supported LACP or static aggregated Ethernet on both ends as appropriate.
  3. Verify MAC learning and the relevant source port/VLAN association.
  4. Configure supported VSTP membership and root priorities for the chosen VLANs.

Explanation

Correct Answer

B:

For a large enterprise updating redundant switch links, the direct corrective action is: Configure supported LACP or static aggregated Ethernet on both ends as appropriate. This addresses the mechanism: A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. Confirm by checking: The aggregate reports active members and traffic survives loss of one constituent link. During rollout, check LACP mode, member speed and VLAN consistency before bringing up the bundle.

Incorrect Answers

A:

A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate. The appropriate correction for the reported case is: Configure supported LACP or static aggregated Ethernet on both ends as appropriate.

C:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. Fixing that different mechanism would not address the current root cause: a link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree.

D:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. Its verification is distinct from the reported condition: Two parallel switch uplinks form a Layer 2 loop because they were attached without a compatible aggregation design. The change must retain both link resilience and correct VLAN isolation.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests