mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 57

Question 560

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The team should test joins and forwarding separately. Which response best restores the intended behavior?

  1. Enable the supported SPT behavior and verify source-directed joins where appropriate.
  2. Inspect and correct downstream receiver removal and upstream PIM prune processing.
  3. Design a suitable ASM group with functioning IGMP membership and rendezvous-point information.
  4. Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling.

Explanation

Correct Answer

D:

For an enterprise telemetry network with multicast subscribers, the direct corrective action is: Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling. This addresses the mechanism: PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Confirm by checking: show pim join reports an expected entry and packets follow the joined multicast branch. During rollout, verify unicast routing to the source or RP before expecting successful reverse-path checks.

Incorrect Answers

A:

PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. The appropriate correction for the reported case is: Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling.

B:

PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes. Fixing that different mechanism would not address the current root cause: PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere.

C:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. Its verification is distinct from the reported condition: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The team should test joins and forwarding separately.

Question 561

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An OSPF stub area receives or expects external LSA behavior incompatible with its intended design. The correction must not expose administrative network prefixes. What would demonstrate a successful correction under test?

  1. Area routers learn a usable default route without inappropriate external LSAs.
  2. show ospf3 neighbor indicates a healthy IPv6 adjacency and IPv6 routes are learned.
  3. The peers reach Full state and show ospf interface reports the planned area on both sides.
  4. The local type-7 advertisement appears and translated external reachability is available outside the NSSA.

Explanation

Correct Answer

A:

For a healthcare organization connecting redundant facilities, the decisive evidence is: Area routers learn a usable default route without inappropriate external LSAs. This validates the action: Configure a compatible stub-area type throughout the area and validate ABR default behavior. Because: A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. The appropriate correction for the reported case is: Configure a compatible stub-area type throughout the area and validate ABR default behavior.

C:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Fixing that different mechanism would not address the current root cause: a conventional stub area limits external LSAs and uses a suitable default route for outside reachability.

D:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Its verification is distinct from the reported condition: An OSPF stub area receives or expects external LSA behavior incompatible with its intended design. The correction must not expose administrative network prefixes.

Question 562

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: Two routers connected by one Ethernet segment have mismatched OSPF area assignments and never become neighbors. The correction must not expose administrative network prefixes. Which configuration adjustment should be made first to address this issue?

  1. Configure a supported OSPF point-to-point network type consistently on the dedicated link.
  2. Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design.
  3. Set appropriate interface metrics that reflect the desired route costs across the topology.
  4. Connect the appropriate area border routers to area 0 and repair the multi-area topology.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, the direct corrective action is: Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design. This addresses the mechanism: OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Confirm by checking: The peers reach Full state and show ospf interface reports the planned area on both sides. During rollout, do not change the backbone area relationship without validating ABR connectivity.

Incorrect Answers

A:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. The appropriate correction for the reported case is: Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design.

C:

OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. Fixing that different mechanism would not address the current root cause: OSPF neighbors on a common link must agree on the area identifier used in Hello processing.

D:

OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. Its verification is distinct from the reported condition: Two routers connected by one Ethernet segment have mismatched OSPF area assignments and never become neighbors. The correction must not expose administrative network prefixes.

Question 563

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: An enterprise deploys IPv6 group delivery but attempts to identify receivers with ordinary IPv6 unicast addresses. The corrected tree must respect source and group authorization. Which configuration adjustment should be made first to address this issue?

  1. Configure or correct the intended RP mapping for the affected group range throughout the domain.
  2. Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.
  3. Select a suitable IPv6 multicast group and scope for the approved application.
  4. Confirm neighbor priorities and configured DR role on the shared segment.

Explanation

Correct Answer

C:

For a multimedia training network running Junos multicast routers, the direct corrective action is: Select a suitable IPv6 multicast group and scope for the approved application. This addresses the mechanism: IPv6 multicast destinations begin in the FF00::/8 range and include scope information. Confirm by checking: An eligible receiver joins the IPv6 multicast group and receives one expected copy. During rollout, do not confuse IPv6 multicast scope with the IPv4 private addressing range.

Incorrect Answers

A:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. The appropriate correction for the reported case is: Select a suitable IPv6 multicast group and scope for the approved application.

B:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Fixing that different mechanism would not address the current root cause: IPv6 multicast destinations begin in the FF00::/8 range and include scope information.

D:

PIM designated-router election selects the local router responsible for certain first-hop PIM functions. Its verification is distinct from the reported condition: An enterprise deploys IPv6 group delivery but attempts to identify receivers with ordinary IPv6 unicast addresses. The corrected tree must respect source and group authorization.

Question 564

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Trunk links lack a recently introduced VLAN because the team expects dynamic VLAN registration without enabling a registration mechanism. The change must retain both link resilience and correct VLAN isolation. What would demonstrate a successful correction under test?

  1. The aggregate reports active members and traffic survives loss of one constituent link.
  2. Two isolated test devices cannot communicate directly but each can reach the authorized gateway.
  3. show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet.
  4. Both participating switches learn the correct registered VLAN and forward its traffic.

Explanation

Correct Answer

D:

For a large enterprise updating redundant switch links, the decisive evidence is: Both participating switches learn the correct registered VLAN and forward its traffic. This validates the action: Enable supported MVRP on intended links and validate the dynamically registered VLAN membership. Because: Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. The appropriate correction for the reported case is: Enable supported MVRP on intended links and validate the dynamically registered VLAN membership.

B:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. Fixing that different mechanism would not address the current root cause: multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices.

C:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: Trunk links lack a recently introduced VLAN because the team expects dynamic VLAN registration without enabling a registration mechanism. The change must retain both link resilience and correct VLAN isolation.

Question 565

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: A remote VTEP cannot locate a host MAC in another VXLAN segment even though the BGP EVPN session is established. The overlay must relearn host reachability without stale tunnel selection. Which response best restores the intended behavior?

  1. Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance.
  2. Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets.
  3. Set approved export and import route targets for each isolated tenant EVPN service.
  4. Verify supported split-horizon or ESI label handling for the affected multihomed path.

Explanation

Correct Answer

A:

For an enterprise migrating virtual machines between racks, the direct corrective action is: Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance. This addresses the mechanism: EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Confirm by checking: A remote EVPN MAC table resolves the host to the expected originating VTEP. During rollout, check duplicate MAC and route-target behavior before forcing remote FDB entries.

Incorrect Answers

B:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. The appropriate correction for the reported case is: Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance.

C:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. Fixing that different mechanism would not address the current root cause: EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.

D:

EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment. Its verification is distinct from the reported condition: A remote VTEP cannot locate a host MAC in another VXLAN segment even though the BGP EVPN session is established. The overlay must relearn host reachability without stale tunnel selection.

Question 566

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The correction must not expose administrative network prefixes. Which design objective is best served by this mechanism?

  1. Assign unique router IDs to routers participating in the same OSPF routing domain.
  2. Use area 0 as the backbone of a multi-area OSPF routing domain.
  3. Use identical area configuration on directly adjacent OSPF participants.
  4. Use OSPF authentication to control trusted routing neighbors on supported links.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, this mechanism fits the requirement: Use area 0 as the backbone of a multi-area OSPF routing domain. The design is appropriate because: OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. In this scenario, the observed issue is: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The corresponding implementation is: Connect the appropriate area border routers to area 0 and repair the multi-area topology.

Incorrect Answers

A:

The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. The appropriate correction for the reported case is: Connect the appropriate area border routers to area 0 and repair the multi-area topology.

C:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Fixing that different mechanism would not address the current root cause: OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers.

D:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. Its verification is distinct from the reported condition: An enterprise creates nonbackbone OSPF areas that cannot exchange routes through the backbone. The correction must not expose administrative network prefixes.

Question 567

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: A circuit works for short frames but drops full-size customer frames after stacked VLAN tagging is enabled. The change must retain both link resilience and correct VLAN isolation. What risk must the implementation avoid?

  1. Validate MTU overhead and prevent tenant service tags from colliding.
  2. Avoid partial region updates that temporarily create different spanning-tree domains.
  3. Check all intermediary devices rather than changing only the ingress port.
  4. Check ELS platform syntax rather than copying legacy switch syntax without validation.

Explanation

Correct Answer

C:

For a large enterprise updating redundant switch links, the relevant safeguard is: Check all intermediary devices rather than changing only the ingress port. It matters while implementing: Increase supported link MTU consistently or adjust customer frame limits where required. The fault involves: Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. The required acceptance result remains: Maximum expected tagged frames traverse every provider hop without oversize drops.

Incorrect Answers

A:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. The appropriate correction for the reported case is: Check all intermediary devices rather than changing only the ingress port.

B:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. Fixing that different mechanism would not address the current root cause: adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU.

D:

Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. Its verification is distinct from the reported condition: A circuit works for short frames but drops full-size customer frames after stacked VLAN tagging is enabled. The change must retain both link resilience and correct VLAN isolation.

Question 568

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A service provider must carry identical customer VLAN IDs from different tenants without mixing their traffic. The proposed behavior must be validated on actual switching ports. Which configuration adjustment should be made first to address this issue?

  1. Increase supported link MTU consistently or adjust customer frame limits where required.
  2. Enable supported MVRP on intended links and validate the dynamically registered VLAN membership.
  3. Inspect boundary-port roles and configure supported interoperation at the domain edge.
  4. Configure supported provider bridging with a distinct service tag for each tenant context.

Explanation

Correct Answer

D:

For a data-center access fabric using tagged trunks, the direct corrective action is: Configure supported provider bridging with a distinct service tag for each tenant context. This addresses the mechanism: IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Confirm by checking: Captures show preserved inner customer tags inside the expected outer service tag. During rollout, validate MTU overhead and prevent tenant service tags from colliding.

Incorrect Answers

A:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. The appropriate correction for the reported case is: Configure supported provider bridging with a distinct service tag for each tenant context.

B:

Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. Fixing that different mechanism would not address the current root cause: IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.

C:

MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. Its verification is distinct from the reported condition: A service provider must carry identical customer VLAN IDs from different tenants without mixing their traffic. The proposed behavior must be validated on actual switching ports.

Question 569

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: Multicast traffic crosses a distant RP even after an efficient direct path to its sender is available. The change must preserve source identity and avoid multicast loops. For which use case is this feature the best match?

  1. Use source shortest-path trees to optimize established PIM-SM multicast delivery.
  2. Use PIM sparse mode for receiver-driven multicast path construction.
  3. Use (*,G) state when receiving any-source multicast through a shared tree.
  4. Use IGMPv2-style group reports to identify IPv4 receiver membership.

Explanation

Correct Answer

A:

For a live-event venue using routed multicast streaming, this mechanism fits the requirement: Use source shortest-path trees to optimize established PIM-SM multicast delivery. The design is appropriate because: PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. In this scenario, the observed issue is: Multicast traffic crosses a distant RP even after an efficient direct path to its sender is available. The corresponding implementation is: Enable the supported SPT behavior and verify source-directed joins where appropriate.

Incorrect Answers

B:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. The appropriate correction for the reported case is: Enable the supported SPT behavior and verify source-directed joins where appropriate.

C:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Fixing that different mechanism would not address the current root cause: PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree.

D:

IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. Its verification is distinct from the reported condition: Multicast traffic crosses a distant RP even after an efficient direct path to its sender is available. The change must preserve source identity and avoid multicast loops.

Question 570

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. The switch must distinguish identity failures from absent authentication responses. Which operational result would most clearly confirm the fix?

  1. The unauthenticated nonresponsive test client reaches only the approved onboarding services.
  2. The intended printer gains restricted access while an unrecognized MAC does not inherit privileged resources.
  3. The guest sees the authorized portal and only obtains permitted access after the expected process.
  4. An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state.

Explanation

Correct Answer

B:

For a managed office network with printers and laptops, the decisive evidence is: The intended printer gains restricted access while an unrecognized MAC does not inherit privileged resources. This validates the action: Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity. Because: MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. The appropriate correction for the reported case is: Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity.

C:

Captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow. Fixing that different mechanism would not address the current root cause: MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy.

D:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Its verification is distinct from the reported condition: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. The switch must distinguish identity failures from absent authentication responses.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests