mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 58

Question 570

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. The switch must distinguish identity failures from absent authentication responses. Which operational result would most clearly confirm the fix?

  1. The unauthenticated nonresponsive test client reaches only the approved onboarding services.
  2. The intended printer gains restricted access while an unrecognized MAC does not inherit privileged resources.
  3. The guest sees the authorized portal and only obtains permitted access after the expected process.
  4. An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state.

Explanation

Correct Answer

B:

For a managed office network with printers and laptops, the decisive evidence is: The intended printer gains restricted access while an unrecognized MAC does not inherit privileged resources. This validates the action: Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity. Because: MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. The appropriate correction for the reported case is: Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity.

C:

Captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow. Fixing that different mechanism would not address the current root cause: MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy.

D:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Its verification is distinct from the reported condition: A legacy network printer cannot run an 802.1X supplicant and never receives permitted LAN access. The switch must distinguish identity failures from absent authentication responses.

Question 571

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The improvement must not starve business traffic. What is the most appropriate correction to implement?

  1. Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy.
  2. Apply a suitable RED or weighted drop profile through the appropriate scheduler.
  3. Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification.
  4. Configure an appropriate constrained high-priority scheduler for the approved real-time class.

Explanation

Correct Answer

C:

For a campus switch team configuring Junos egress queues, the direct corrective action is: Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification. This addresses the mechanism: Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. Confirm by checking: Under load the less-important traffic experiences expected earlier drops while protected traffic is retained. During rollout, do not treat packet-loss priority as a substitute for guaranteed bandwidth or physical capacity.

Incorrect Answers

A:

Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. The appropriate correction for the reported case is: Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification.

B:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. Fixing that different mechanism would not address the current root cause: junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure.

D:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Its verification is distinct from the reported condition: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The improvement must not starve business traffic.

Question 572

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A multicast router drops a received stream even though its physical receiving interface is up. The group traffic must reach interested receivers without flooding other locations. Which response best restores the intended behavior?

  1. Design a suitable ASM group with functioning IGMP membership and rendezvous-point information.
  2. Configure supported IGMP snooping and verify a reachable multicast-router port in the receiver VLAN.
  3. Configure or correct the intended RP mapping for the affected group range throughout the domain.
  4. Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, the direct corrective action is: Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface. This addresses the mechanism: Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. Confirm by checking: The multicast forwarding state uses the intended RPF interface and packet discard counters stop increasing. During rollout, do not disable loop-prevention checks simply to make unwanted multicast traffic pass.

Incorrect Answers

A:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. The appropriate correction for the reported case is: Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface.

B:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Fixing that different mechanism would not address the current root cause: multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP.

C:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Its verification is distinct from the reported condition: A multicast router drops a received stream even though its physical receiving interface is up. The group traffic must reach interested receivers without flooding other locations.

Question 573

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The intended segmentation and loop prevention must remain intact. What is the most likely design-related cause?

  1. Root protection can prevent a specified port from accepting an unexpected superior root advertisement.
  2. Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit.
  3. Layer 2 storm control limits specified excessive broadcast or multicast traffic on a port.
  4. An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN.

Explanation

Correct Answer

A:

For a campus network built with Juniper EX switches, the governing mechanism is: Root protection can prevent a specified port from accepting an unexpected superior root advertisement. It explains the reported symptom: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The intended response is: Configure supported spanning-tree root protection on the relevant downstream boundary. Verification: A test superior BPDU is blocked and the authorized root stays unchanged.

Incorrect Answers

B:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. This alternative mechanism does not match the current fault.

C:

Layer 2 storm control limits specified excessive broadcast or multicast traffic on a port. Fixing that different mechanism would not address the current root cause: root protection can prevent a specified port from accepting an unexpected superior root advertisement.

D:

An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN. Its verification is distinct from the reported condition: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The intended segmentation and loop prevention must remain intact.

Question 574

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A control-plane restart triggers avoidable route withdrawal despite forwarding continuing on a capable BGP neighbor. The routing policy must retain intended primary and backup paths. Which operational result would most clearly confirm the fix?

  1. The authorized peer establishes while a test using incorrect credentials is refused.
  2. A controlled restart retains eligible forwarding for the negotiated grace interval and recovers correctly.
  3. Internal routers resolve the advertised next hop through the enterprise IGP and can forward to the prefix.
  4. The selected route has multiple eligible forwarding next hops and a traffic test uses both paths.

Explanation

Correct Answer

B:

For a dual-homed business network peering with two upstream providers, the decisive evidence is: A controlled restart retains eligible forwarding for the negotiated grace interval and recovers correctly. This validates the action: Configure compatible graceful-restart behavior and timers across designated peers. Because: BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. The appropriate correction for the reported case is: Configure compatible graceful-restart behavior and timers across designated peers.

C:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Fixing that different mechanism would not address the current root cause: BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions.

D:

BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. Its verification is distinct from the reported condition: A control-plane restart triggers avoidable route withdrawal despite forwarding continuing on a capable BGP neighbor. The routing policy must retain intended primary and backup paths.

Question 575

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: A multihomed VXLAN service receives duplicate flooded frames from two attached PEs. The engineer must verify both BGP EVPN signaling and underlay reachability. Which limitation should guide the change control?

  1. Check all-active versus single-active semantics before changing failover advertisements.
  2. Check every underlay hop rather than changing only the leaf switch MTU.
  3. Validate election stability on failover to avoid a transient dual-forwarding storm.
  4. Verify platform and release-specific EVPN support rather than enabling every address family indiscriminately.

Explanation

Correct Answer

C:

For a service provider offering isolated VXLAN services, the relevant safeguard is: Validate election stability on failover to avoid a transient dual-forwarding storm. It matters while implementing: Verify the designated-forwarder election and associated multihoming mode for the affected VLAN or Ethernet tag. The fault involves: EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments. The required acceptance result remains: Only the expected DF forwards designated BUM traffic on the multihomed segment.

Incorrect Answers

A:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. The appropriate correction for the reported case is: Validate election stability on failover to avoid a transient dual-forwarding storm.

B:

VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. Fixing that different mechanism would not address the current root cause: EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments.

D:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. Its verification is distinct from the reported condition: A multihomed VXLAN service receives duplicate flooded frames from two attached PEs. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 576

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The group traffic must reach interested receivers without flooding other locations. What important rollout safeguard is most relevant here?

  1. Avoid using reserved link-local multicast groups for arbitrary enterprise streams.
  2. Protect election priorities and domain boundaries from unauthorized RP injection.
  3. Consider unwanted sources and multicast boundary controls in an open ASM group.
  4. Correlate RPF and PIM state before making indiscriminate VLAN flooding changes.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, the relevant safeguard is: Correlate RPF and PIM state before making indiscriminate VLAN flooding changes. It matters while implementing: Inspect multicast route, upstream interface and output interface list for the failed group. The fault involves: Multicast forwarding depends on per-group and per-source route state in addition to host membership. The required acceptance result remains: The expected multicast forwarding entry contains its correct upstream and downstream interfaces.

Incorrect Answers

A:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. The appropriate correction for the reported case is: Correlate RPF and PIM state before making indiscriminate VLAN flooding changes.

B:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. Fixing that different mechanism would not address the current root cause: multicast forwarding depends on per-group and per-source route state in addition to host membership.

C:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. Its verification is distinct from the reported condition: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The group traffic must reach interested receivers without flooding other locations.

Question 577

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An external BGP peering repeatedly fails negotiation because the configured peer AS differs from the neighbor's actual AS. The diagnosis must distinguish a healthy BGP session from eligible received routes. For which use case is this feature the best match?

  1. Use correct eBGP AS relationships when forming a session with another routing domain.
  2. Use eBGP multihop for intentionally non-direct external BGP peerings.
  3. Use BGP communities to classify groups of prefixes for routing policy.
  4. Use AS-path length as a BGP path selection discriminator after higher criteria match.

Explanation

Correct Answer

A:

For a managed network team troubleshooting an internet edge, this mechanism fits the requirement: Use correct eBGP AS relationships when forming a session with another routing domain. The design is appropriate because: BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. In this scenario, the observed issue is: An external BGP peering repeatedly fails negotiation because the configured peer AS differs from the neighbor's actual AS. The corresponding implementation is: Correct the peer-as setting for the specific external BGP neighbor and recheck the session.

Incorrect Answers

B:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. The appropriate correction for the reported case is: Correct the peer-as setting for the specific external BGP neighbor and recheck the session.

C:

BGP community attributes carry policy tags that importing or exporting routers can match. Fixing that different mechanism would not address the current root cause: BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship.

D:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Its verification is distinct from the reported condition: An external BGP peering repeatedly fails negotiation because the configured peer AS differs from the neighbor's actual AS. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 578

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: A forwarding class is classified correctly but receives too little bandwidth on a congested interface. Classification and downstream remarking must not be confused. Which limitation should guide the change control?

  1. Control priority traffic volume to avoid starving all other egress queues.
  2. Check percentages and priority interactions before promising absolute throughput for every burst.
  3. Verify the actual output interface and aggregate hierarchy rather than binding a map to the wrong unit.
  4. Do not trust arbitrary endpoint DSCP values simply because a VLAN tag is present.

Explanation

Correct Answer

B:

For a financial services network enforcing trusted DSCP markings, the relevant safeguard is: Check percentages and priority interactions before promising absolute throughput for every burst. It matters while implementing: Assign appropriate scheduler transmit-rate settings for the required class and validate link capacity. The fault involves: Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. The required acceptance result remains: Queue counters show the intended class receives its planned share during a controlled load.

Incorrect Answers

A:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. The appropriate correction for the reported case is: Check percentages and priority interactions before promising absolute throughput for every burst.

C:

A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. Fixing that different mechanism would not address the current root cause: junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities.

D:

The ingress trust boundary decides whether external markings should be accepted or reclassified. Its verification is distinct from the reported condition: A forwarding class is classified correctly but receives too little bandwidth on a congested interface. Classification and downstream remarking must not be confused.

Question 579

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A desktop plugged into an EX switch receives traffic from an unexpected user VLAN. The service must preserve tags without bridging unrelated tenants. What important rollout safeguard is most relevant here?

  1. Validate filter match order and feature support to avoid broad unintended reassignment.
  2. Check ELS platform syntax rather than copying legacy switch syntax without validation.
  3. Check management and voice traffic before moving the physical switch port.
  4. Check interface roles and platform behavior before enabling loop protection broadly.

Explanation

Correct Answer

C:

For a provider Ethernet network carrying customer Layer 2 services, the relevant safeguard is: Check management and voice traffic before moving the physical switch port. It matters while implementing: Set the intended VLAN membership on the access logical interface and verify the port mode. The fault involves: An untagged Ethernet access port places endpoint traffic into its configured access VLAN. The required acceptance result remains: show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet.

Incorrect Answers

A:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. The appropriate correction for the reported case is: Check management and voice traffic before moving the physical switch port.

B:

Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. Fixing that different mechanism would not address the current root cause: an untagged Ethernet access port places endpoint traffic into its configured access VLAN.

D:

Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. Its verification is distinct from the reported condition: A desktop plugged into an EX switch receives traffic from an unexpected user VLAN. The service must preserve tags without bridging unrelated tenants.

Question 580

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The switch must distinguish identity failures from absent authentication responses. For which use case is this feature the best match?

  1. Use server-fail policy for planned authorization behavior during authentication-server outages.
  2. Use a guest VLAN for limited access by suitable non-802.1X devices.
  3. Use ordered multi-method access authentication for mixed enterprise endpoints.
  4. Use a reject VLAN to distinguish failed authentication from nonresponsive guest devices.

Explanation

Correct Answer

D:

For a managed office network with printers and laptops, this mechanism fits the requirement: Use a reject VLAN to distinguish failed authentication from nonresponsive guest devices. The design is appropriate because: A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. In this scenario, the observed issue is: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The corresponding implementation is: Configure supported server-reject access behavior and a restricted reject VLAN policy.

Incorrect Answers

A:

Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. The appropriate correction for the reported case is: Configure supported server-reject access behavior and a restricted reject VLAN policy.

B:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Fixing that different mechanism would not address the current root cause: a RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN.

C:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. Its verification is distinct from the reported condition: A managed supplicant responds to 802.1X but provides invalid credentials and must not enter the corporate VLAN. The switch must distinguish identity failures from absent authentication responses.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests