mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 52

Question 510

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: An ASM receiver joins G but routers disagree about the RP responsible for the group. The group traffic must reach interested receivers without flooding other locations. Which operational change most directly resolves the observed failure?

  1. Verify source-facing PIM DR behavior and reachability to the correct rendezvous point.
  2. Configure or correct the intended RP mapping for the affected group range throughout the domain.
  3. Enable the supported SPT behavior and verify source-directed joins where appropriate.
  4. Apply explicit multicast scope or PIM routing policy at the relevant domain boundary.

Explanation

Correct Answer

B:

For a campus distributing IP video to several buildings, the direct corrective action is: Configure or correct the intended RP mapping for the affected group range throughout the domain. This addresses the mechanism: PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Confirm by checking: show pim rps reports the planned RP and receivers join the corresponding tree. During rollout, do not move the RP without validating reachable unicast routing to its address.

Incorrect Answers

A:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. The appropriate correction for the reported case is: Configure or correct the intended RP mapping for the affected group range throughout the domain.

C:

PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. Fixing that different mechanism would not address the current root cause: PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs.

D:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Its verification is distinct from the reported condition: An ASM receiver joins G but routers disagree about the RP responsible for the group. The group traffic must reach interested receivers without flooding other locations.

Question 511

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: Two BGP speakers establish a session but exchange IPv4 prefixes only and IPv6 routes remain absent. The routing policy must retain intended primary and backup paths. What protocol behavior accounts for this failure?

  1. BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes.
  2. BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing.
  3. BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged.
  4. iBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it.

Explanation

Correct Answer

C:

For a dual-homed business network peering with two upstream providers, the governing mechanism is: BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. It explains the reported symptom: Two BGP speakers establish a session but exchange IPv4 prefixes only and IPv6 routes remain absent. The intended response is: Enable the authorized inet6-unicast family consistently at relevant BGP group or peer scope. Verification: An IPv6 test prefix appears in received BGP routes with a reachable IPv6 next hop.

Incorrect Answers

A:

BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. This alternative mechanism does not match the current fault.

B:

BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. Fixing that different mechanism would not address the current root cause: BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged.

D:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Its verification is distinct from the reported condition: Two BGP speakers establish a session but exchange IPv4 prefixes only and IPv6 routes remain absent. The routing policy must retain intended primary and backup paths.

Question 512

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: An ASM receiver joins a group without selecting one specific sender but engineers search only (S,G) entries. The change must preserve source identity and avoid multicast loops. Which design objective is best served by this mechanism?

  1. Use PIM sparse mode for receiver-driven multicast path construction.
  2. Use source-group entries to trace a single multicast sender's path.
  3. Use RPF to prevent loops and select valid upstream multicast paths.
  4. Use (*,G) state when receiving any-source multicast through a shared tree.

Explanation

Correct Answer

D:

For a live-event venue using routed multicast streaming, this mechanism fits the requirement: Use (*,G) state when receiving any-source multicast through a shared tree. The design is appropriate because: Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. In this scenario, the observed issue is: An ASM receiver joins a group without selecting one specific sender but engineers search only (S,G) entries. The corresponding implementation is: Verify receiver joins and the relevant shared-tree multicast state toward the RP.

Incorrect Answers

A:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. The appropriate correction for the reported case is: Verify receiver joins and the relevant shared-tree multicast state toward the RP.

B:

(S,G) multicast state identifies one particular source S and destination group G. Fixing that different mechanism would not address the current root cause: shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources.

C:

Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. Its verification is distinct from the reported condition: An ASM receiver joins a group without selecting one specific sender but engineers search only (S,G) entries. The change must preserve source identity and avoid multicast loops.

Question 513

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A session negotiates only a non-IPv4 family and the expected IPv4 unicast routes do not arrive. The diagnosis must distinguish a healthy BGP session from eligible received routes. Which underlying distinction should guide troubleshooting?

  1. BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes.
  2. BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged.
  3. BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete.
  4. Junos route filters distinguish exact matching from longer or longer-prefix patterns.

Explanation

Correct Answer

A:

For a managed network team troubleshooting an internet edge, the governing mechanism is: BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. It explains the reported symptom: A session negotiates only a non-IPv4 family and the expected IPv4 unicast routes do not arrive. The intended response is: Configure the intended inet-unicast family on the authorized BGP peering. Verification: The peer exchanges a test IPv4 prefix and the route enters inet.0 when eligible.

Incorrect Answers

B:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. This alternative mechanism does not match the current fault.

C:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. Fixing that different mechanism would not address the current root cause: BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes.

D:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. Its verification is distinct from the reported condition: A session negotiates only a non-IPv4 family and the expected IPv4 unicast routes do not arrive. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 514

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The correction must not expose administrative network prefixes. Which limitation should guide the change control?

  1. Separate advertisement failures from policy and forwarding installation faults.
  2. Ensure timer settings and platform CPU capacity tolerate the requested BFD frequency.
  3. Treat a virtual link as a controlled exception and plan a physical backbone repair.
  4. Avoid flipping E1 and E2 globally without analyzing alternate egress paths.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Ensure timer settings and platform CPU capacity tolerate the requested BFD frequency. It matters while implementing: Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection. The fault involves: Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. The required acceptance result remains: An injected forwarding failure brings down the affected neighbor within the planned interval.

Incorrect Answers

A:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. The appropriate correction for the reported case is: Ensure timer settings and platform CPU capacity tolerate the requested BFD frequency.

C:

A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. Fixing that different mechanism would not address the current root cause: Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers.

D:

Type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection. Its verification is distinct from the reported condition: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The correction must not expose administrative network prefixes.

Question 515

At a branch router serving several application classes, a Junos specialist investigates this scenario: A branch wants to smooth excess traffic over time but a policy immediately discards every burst above a fixed threshold. The team must validate packet drops by actual queue statistics. What important rollout safeguard is most relevant here?

  1. Avoid aggressive early drops that harm short or sensitive application flows.
  2. Review fragment behavior and protocol matches before relying on broad address-only conditions.
  3. Account for added buffer delay and do not overshape real-time voice streams.
  4. Control priority traffic volume to avoid starving all other egress queues.

Explanation

Correct Answer

C:

For a branch router serving several application classes, the relevant safeguard is: Account for added buffer delay and do not overshape real-time voice streams. It matters while implementing: Use appropriate egress shaping for the traffic that must be rate-smoothed instead of indiscriminate ingress policing. The fault involves: Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit. The required acceptance result remains: A burst is transmitted at a controlled rate without the same avoidable tail drops.

Incorrect Answers

A:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. The appropriate correction for the reported case is: Account for added buffer delay and do not overshape real-time voice streams.

B:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Fixing that different mechanism would not address the current root cause: shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit.

D:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Its verification is distinct from the reported condition: A branch wants to smooth excess traffic over time but a policy immediately discards every burst above a fixed threshold. The team must validate packet drops by actual queue statistics.

Question 516

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: Isolated private VLAN endpoints can reach neither each other nor the legitimate default gateway. The proposed behavior must be validated on actual switching ports. Which precaution should be checked before committing the change?

  1. Check MAC aging and port movement before pinning static entries.
  2. Check all intermediary devices rather than changing only the ingress port.
  3. Verify device-model support and avoid confusing private VLANs with firewall isolation between routed VLANs.
  4. Verify secondary-to-primary mappings on each switch in a multichassis deployment.

Explanation

Correct Answer

D:

For a data-center access fabric using tagged trunks, the relevant safeguard is: Verify secondary-to-primary mappings on each switch in a multichassis deployment. It matters while implementing: Configure the gateway-facing port with proper promiscuous association for the private VLAN topology. The fault involves: Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. The required acceptance result remains: Isolated and community hosts reach the shared gateway while tenant-to-tenant restrictions remain.

Incorrect Answers

A:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. The appropriate correction for the reported case is: Verify secondary-to-primary mappings on each switch in a multichassis deployment.

B:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Fixing that different mechanism would not address the current root cause: private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit.

C:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. Its verification is distinct from the reported condition: Isolated private VLAN endpoints can reach neither each other nor the legitimate default gateway. The proposed behavior must be validated on actual switching ports.

Question 517

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: Two external BGP routers are separated by intermediate routed devices and an ordinary directly connected peering does not work. The routing policy must retain intended primary and backup paths. Which response best restores the intended behavior?

  1. Configure supported eBGP multihop behavior and reliable local-address selection for the approved peer.
  2. Configure supported multipath and forwarding next-hop behavior for truly equivalent paths.
  3. Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix.
  4. Enable advertise-inactive only for the intentional peer context and test its effect.

Explanation

Correct Answer

A:

For a dual-homed business network peering with two upstream providers, the direct corrective action is: Configure supported eBGP multihop behavior and reliable local-address selection for the approved peer. This addresses the mechanism: A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. Confirm by checking: The multi-hop session establishes and uses the intended loopback source and destination. During rollout, check security filters and route symmetry to avoid accidental distant-peer admission.

Incorrect Answers

B:

BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. The appropriate correction for the reported case is: Configure supported eBGP multihop behavior and reliable local-address selection for the approved peer.

C:

Hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection. Fixing that different mechanism would not address the current root cause: a nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint.

D:

Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. Its verification is distinct from the reported condition: Two external BGP routers are separated by intermediate routed devices and an ordinary directly connected peering does not work. The routing policy must retain intended primary and backup paths.

Question 518

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The tenant traffic must remain isolated across the overlay. What is the most likely design-related cause?

  1. EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment.
  2. EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs.
  3. EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.
  4. VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context.

Explanation

Correct Answer

B:

For a Junos EVPN-VXLAN leaf-spine fabric, the governing mechanism is: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. It explains the reported symptom: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The intended response is: Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets. Verification: The remote IP-VRF learns the approved prefix with valid overlay next-hop resolution.

Incorrect Answers

A:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. This alternative mechanism does not match the current fault.

C:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Fixing that different mechanism would not address the current root cause: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs.

D:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Its verification is distinct from the reported condition: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The tenant traffic must remain isolated across the overlay.

Question 519

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Two application hosts should communicate with each other but remain isolated from other tenant communities on the same primary VLAN. The change must retain both link resilience and correct VLAN isolation. What protocol behavior accounts for this failure?

  1. IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.
  2. Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity.
  3. Private VLAN community ports support intra-community traffic while preventing communication with other communities.
  4. Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance.

Explanation

Correct Answer

C:

For a large enterprise updating redundant switch links, the governing mechanism is: Private VLAN community ports support intra-community traffic while preventing communication with other communities. It explains the reported symptom: Two application hosts should communicate with each other but remain isolated from other tenant communities on the same primary VLAN. The intended response is: Create the intended community membership and permitted promiscuous gateway association. Verification: Hosts in the same community communicate and cross-community test frames are blocked.

Incorrect Answers

A:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. This alternative mechanism does not match the current fault.

B:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. Fixing that different mechanism would not address the current root cause: private VLAN community ports support intra-community traffic while preventing communication with other communities.

D:

Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance. Its verification is distinct from the reported condition: Two application hosts should communicate with each other but remain isolated from other tenant communities on the same primary VLAN. The change must retain both link resilience and correct VLAN isolation.

Question 520

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: Two VLANs need different active Layer 2 paths but use one common spanning-tree root everywhere. The intended segmentation and loop prevention must remain intact. What requirement most specifically calls for this approach?

  1. Use aggregated Ethernet for redundant parallel Ethernet links without independent forwarding loops.
  2. Use access VLAN assignment for a single untagged user segment.
  3. Use MSTP boundary analysis when interconnecting different spanning-tree domains.
  4. Use VSTP when different VLANs require distinct Layer 2 forwarding trees.

Explanation

Correct Answer

D:

For a campus network built with Juniper EX switches, this mechanism fits the requirement: Use VSTP when different VLANs require distinct Layer 2 forwarding trees. The design is appropriate because: VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. In this scenario, the observed issue is: Two VLANs need different active Layer 2 paths but use one common spanning-tree root everywhere. The corresponding implementation is: Configure supported VSTP membership and root priorities for the chosen VLANs.

Incorrect Answers

A:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. The appropriate correction for the reported case is: Configure supported VSTP membership and root priorities for the chosen VLANs.

B:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots.

C:

MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. Its verification is distinct from the reported condition: Two VLANs need different active Layer 2 paths but use one common spanning-tree root everywhere. The intended segmentation and loop prevention must remain intact.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests