mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 50

Question 490

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The change must not introduce an unwanted autonomous-system route leak. What verification result should the engineer expect?

  1. Reflected routes contain expected cluster-list information and survive individual reflector failure.
  2. An intentionally unstable test route shows expected damping and eventual reuse after stability.
  3. Reflector clients receive BGP routes from other clients through the reflector.
  4. show route protocol bgp reveals the selected path and its AS-path sequence.

Explanation

Correct Answer

B:

For a large organization using Junos route reflectors, the decisive evidence is: An intentionally unstable test route shows expected damping and eventual reuse after stability. This validates the action: Evaluate and apply a supported carefully scoped damping policy only where warranted. Because: Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. The appropriate correction for the reported case is: Evaluate and apply a supported carefully scoped damping policy only where warranted.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules.

D:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Its verification is distinct from the reported condition: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The change must not introduce an unwanted autonomous-system route leak.

Question 491

At a school building a restricted guest onboarding network, a Junos specialist investigates this scenario: A RADIUS server outage causes all access switches to block critical devices with no approved fallback behavior. Only approved identities may enter privileged enterprise segments. Which limitation should guide the change control?

  1. Avoid mixing MAC RADIUS and captive portal unsupported modes without required 802.1X handling.
  2. Protect shared secrets and ensure the RADIUS server permits the correct switch as a client.
  3. Do not confuse a server timeout with an explicit Access-Reject or permit a broad uncontrolled bypass.
  4. Do not assume a wrong-password response triggers the same behavior as complete nonresponse.

Explanation

Correct Answer

C:

For a school building a restricted guest onboarding network, the relevant safeguard is: Do not confuse a server timeout with an explicit Access-Reject or permit a broad uncontrolled bypass. It matters while implementing: Set an explicit supported fallback policy and test a simulated RADIUS timeout. The fault involves: Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. The required acceptance result remains: Existing and new devices follow the approved fallback behavior while the server is unreachable.

Incorrect Answers

A:

Captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow. The appropriate correction for the reported case is: Do not confuse a server timeout with an explicit Access-Reject or permit a broad uncontrolled bypass.

B:

In common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server. Fixing that different mechanism would not address the current root cause: server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable.

D:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Its verification is distinct from the reported condition: A RADIUS server outage causes all access switches to block critical devices with no approved fallback behavior. Only approved identities may enter privileged enterprise segments.

Question 492

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: A technician plugs a phone into the wrong switch port and cannot identify its actual neighbor from cabling records. The solution should not give workstation traffic untrusted voice privileges. When would the described mechanism be appropriate?

  1. Use a dual-use access port to serve an IP phone plus an attached workstation.
  2. Use PoE capacity planning when many phones draw power from one access switch.
  3. Use PoE classification to allocate suitable endpoint power safely.
  4. Use LLDP to discover directly connected Ethernet neighbors.

Explanation

Correct Answer

D:

For a branch introducing an IP telephony access layer, this mechanism fits the requirement: Use LLDP to discover directly connected Ethernet neighbors. The design is appropriate because: Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. In this scenario, the observed issue is: A technician plugs a phone into the wrong switch port and cannot identify its actual neighbor from cabling records. The corresponding implementation is: Enable supported LLDP on authorized interfaces and inspect neighbor information.

Incorrect Answers

A:

An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior. The appropriate correction for the reported case is: Enable supported LLDP on authorized interfaces and inspect neighbor information.

B:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Fixing that different mechanism would not address the current root cause: Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices.

C:

PoE power classification informs the power source of the powered device's required allocation. Its verification is distinct from the reported condition: A technician plugs a phone into the wrong switch port and cannot identify its actual neighbor from cabling records. The solution should not give workstation traffic untrusted voice privileges. When would the described mechanism be appropriate.

Question 493

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The internal forwarding path must remain stable when one uplink fails. What important rollout safeguard is most relevant here?

  1. Check platform semantics and ensure transit interfaces are not made passive inadvertently.
  2. Avoid flipping E1 and E2 globally without analyzing alternate egress paths.
  3. Do not activate the routing protocol on an untrusted or management-facing interface accidentally.
  4. Do not hide an actual failing link solely by increasing timers.

Explanation

Correct Answer

A:

For a national enterprise designing OSPF between offices, the relevant safeguard is: Check platform semantics and ensure transit interfaces are not made passive inadvertently. It matters while implementing: Configure supported OSPF passive behavior on the host-facing interface. The fault involves: A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos. The required acceptance result remains: The subnet is reachable from OSPF peers while no neighbor forms on the passive port.

Incorrect Answers

B:

Type-1 external OSPF cost includes internal cost to the ASBR while type-2 primarily uses the external metric for selection. The appropriate correction for the reported case is: Check platform semantics and ensure transit interfaces are not made passive inadvertently.

C:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Fixing that different mechanism would not address the current root cause: a passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos.

D:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. Its verification is distinct from the reported condition: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The internal forwarding path must remain stable when one uplink fails.

Question 494

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The chosen route must have a valid data-plane next hop. Which underlying distinction should guide troubleshooting?

  1. BGP export policy controls which eligible active routes the speaker announces to selected neighbors.
  2. AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection.
  3. BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete.
  4. In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the governing mechanism is: AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. It explains the reported symptom: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The intended response is: Apply targeted AS-path prepend in an authorized export policy for the backup link. Verification: The upstream receives the appended path and a controlled test prefers the primary ingress.

Incorrect Answers

A:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. This alternative mechanism does not match the current fault.

C:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. Fixing that different mechanism would not address the current root cause: AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection.

D:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Its verification is distinct from the reported condition: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The chosen route must have a valid data-plane next hop.

Question 495

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: Two BGP routes have equal local preference and AS-path length but differ in origin attribute. The diagnosis must distinguish a healthy BGP session from eligible received routes. What is the most appropriate correction to implement?

  1. Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified.
  2. Configure supported eBGP multihop behavior and reliable local-address selection for the approved peer.
  3. Inspect the origin attribute and apply policy only if the intended path requires explicit adjustment.
  4. Apply targeted AS-path prepend in an authorized export policy for the backup link.

Explanation

Correct Answer

C:

For a managed network team troubleshooting an internet edge, the direct corrective action is: Inspect the origin attribute and apply policy only if the intended path requires explicit adjustment. This addresses the mechanism: BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. Confirm by checking: The best route matches documented origin comparison when other earlier criteria are tied. During rollout, do not claim origin always wins over local preference or AS-path length.

Incorrect Answers

A:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. The appropriate correction for the reported case is: Inspect the origin attribute and apply policy only if the intended path requires explicit adjustment.

B:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. Fixing that different mechanism would not address the current root cause: BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete.

D:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. Its verification is distinct from the reported condition: Two BGP routes have equal local preference and AS-path length but differ in origin attribute. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 496

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The overlay must relearn host reachability without stale tunnel selection. Which response best restores the intended behavior?

  1. Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability.
  2. Verify advertisement and processing of the relevant MAC mobility extended community or sequence information.
  3. Ensure eligible IMET route advertisements and the configured VXLAN replication mechanism are consistent.
  4. Verify supported split-horizon or ESI label handling for the affected multihomed path.

Explanation

Correct Answer

D:

For an enterprise migrating virtual machines between racks, the direct corrective action is: Verify supported split-horizon or ESI label handling for the affected multihomed path. This addresses the mechanism: EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment. Confirm by checking: A loop test shows that frames from the segment are not reflected back through a peer attachment. During rollout, do not bypass EVPN loop prevention simply to make one troubleshooting frame visible.

Incorrect Answers

A:

VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. The appropriate correction for the reported case is: Verify supported split-horizon or ESI label handling for the affected multihomed path.

B:

EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. Fixing that different mechanism would not address the current root cause: EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment.

C:

EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership. Its verification is distinct from the reported condition: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The overlay must relearn host reachability without stale tunnel selection.

Question 497

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The corrected tree must respect source and group authorization. What verification result should the engineer expect?

  1. show igmp group displays the intended source filter and unwanted senders do not reach the host.
  2. Routers learn the expected RP mapping and group traffic builds a valid shared tree.
  3. show multicast route or PIM state contains the planned source-group combination.
  4. show pim rps reports the planned RP and receivers join the corresponding tree.

Explanation

Correct Answer

A:

For a multimedia training network running Junos multicast routers, the decisive evidence is: show igmp group displays the intended source filter and unwanted senders do not reach the host. This validates the action: Enable supported IGMPv3 processing and make hosts join the approved source-group pair. Because: IGMPv3 membership records can identify source filters that enable explicit SSM interest. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. The appropriate correction for the reported case is: Enable supported IGMPv3 processing and make hosts join the approved source-group pair.

C:

(S,G) multicast state identifies one particular source S and destination group G. Fixing that different mechanism would not address the current root cause: IGMPv3 membership records can identify source filters that enable explicit SSM interest.

D:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Its verification is distinct from the reported condition: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The corrected tree must respect source and group authorization.

Question 498

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: Several tenant endpoints must reach a gateway but must not exchange Layer 2 traffic with each other. The service must preserve tags without bridging unrelated tenants. Which observation proves this requirement has been satisfied?

  1. Each VLAN shows the intended root and blocked ports without creating a loop.
  2. Two isolated test devices cannot communicate directly but each can reach the authorized gateway.
  3. Hosts in the same community communicate and cross-community test frames are blocked.
  4. Both VLANs pass tagged frames and switch VLAN membership reports the intended trunk.

Explanation

Correct Answer

B:

For a provider Ethernet network carrying customer Layer 2 services, the decisive evidence is: Two isolated test devices cannot communicate directly but each can reach the authorized gateway. This validates the action: Map the isolated ports to the private VLAN design and configure the approved gateway-facing port. Because: Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. The appropriate correction for the reported case is: Map the isolated ports to the private VLAN design and configure the approved gateway-facing port.

C:

Private VLAN community ports support intra-community traffic while preventing communication with other communities. Fixing that different mechanism would not address the current root cause: private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity.

D:

An Ethernet trunk carries selected tagged VLANs and membership must include every allowed VLAN. Its verification is distinct from the reported condition: Several tenant endpoints must reach a gateway but must not exchange Layer 2 traffic with each other. The service must preserve tags without bridging unrelated tenants.

Question 499

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: Two VTEPs reach each other but a tenant VLAN crosses into the wrong remote Ethernet segment. The engineer must verify both BGP EVPN signaling and underlay reachability. What protocol behavior accounts for this failure?

  1. VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames.
  2. VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity.
  3. VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context.
  4. EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE.

Explanation

Correct Answer

C:

For a service provider offering isolated VXLAN services, the governing mechanism is: VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. It explains the reported symptom: Two VTEPs reach each other but a tenant VLAN crosses into the wrong remote Ethernet segment. The intended response is: Align the intended VLAN-to-VNI mapping across participating leaf switches. Verification: A test host in one VLAN exchanges frames only with its matching remote VNI segment.

Incorrect Answers

A:

VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. This alternative mechanism does not match the current fault.

B:

VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. Fixing that different mechanism would not address the current root cause: VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context.

D:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. Its verification is distinct from the reported condition: Two VTEPs reach each other but a tenant VLAN crosses into the wrong remote Ethernet segment. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 500

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The correction must not expose administrative network prefixes. Which limitation should guide the change control?

  1. Distinguish topology LSAs from summary policy to avoid accidental intra-area isolation.
  2. Keep reference bandwidth consistent across routers to avoid asymmetric route decisions.
  3. Avoid shortening dead timers without checking CPU load and adjacent platform support.
  4. Check address families and filtering carefully to avoid importing every static IPv6 route.

Explanation

Correct Answer

D:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Check address families and filtering carefully to avoid importing every static IPv6 route. It matters while implementing: Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process. The fault involves: Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. The required acceptance result remains: Other OSPFv3 routers learn the specified external IPv6 prefix without unrelated statics.

Incorrect Answers

A:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. The appropriate correction for the reported case is: Check address families and filtering carefully to avoid importing every static IPv6 route.

B:

OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain. Fixing that different mechanism would not address the current root cause: junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.

C:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. Its verification is distinct from the reported condition: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The correction must not expose administrative network prefixes.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests