mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 51

Question 500

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The correction must not expose administrative network prefixes. Which limitation should guide the change control?

  1. Distinguish topology LSAs from summary policy to avoid accidental intra-area isolation.
  2. Keep reference bandwidth consistent across routers to avoid asymmetric route decisions.
  3. Avoid shortening dead timers without checking CPU load and adjacent platform support.
  4. Check address families and filtering carefully to avoid importing every static IPv6 route.

Explanation

Correct Answer

D:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Check address families and filtering carefully to avoid importing every static IPv6 route. It matters while implementing: Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process. The fault involves: Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. The required acceptance result remains: Other OSPFv3 routers learn the specified external IPv6 prefix without unrelated statics.

Incorrect Answers

A:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. The appropriate correction for the reported case is: Check address families and filtering carefully to avoid importing every static IPv6 route.

B:

OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain. Fixing that different mechanism would not address the current root cause: junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.

C:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. Its verification is distinct from the reported condition: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The correction must not expose administrative network prefixes.

Question 501

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: A downstream user workstation marks backup traffic as high priority and competes with voice in the protected queue. Classification and downstream remarking must not be confused. Which operational change most directly resolves the observed failure?

  1. Apply a controlled classifier or policer for untrusted ports while trusting only authorized phone or uplink markings.
  2. Inspect Junos interface queue statistics and correlate drops with traffic class and times.
  3. Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification.
  4. Tune supported policer bandwidth and burst size to the measured permitted traffic profile.

Explanation

Correct Answer

A:

For a financial services network enforcing trusted DSCP markings, the direct corrective action is: Apply a controlled classifier or policer for untrusted ports while trusting only authorized phone or uplink markings. This addresses the mechanism: The ingress trust boundary decides whether external markings should be accepted or reclassified. Confirm by checking: The workstation's spoofed expedited marking is reset and voice retains the intended priority. During rollout, do not trust arbitrary endpoint DSCP values simply because a VLAN tag is present.

Incorrect Answers

B:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. The appropriate correction for the reported case is: Apply a controlled classifier or policer for untrusted ports while trusting only authorized phone or uplink markings.

C:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. Fixing that different mechanism would not address the current root cause: the ingress trust boundary decides whether external markings should be accepted or reclassified.

D:

Rate policers use token or burst parameters that influence which short bursts are considered conformant. Its verification is distinct from the reported condition: A downstream user workstation marks backup traffic as high priority and competes with voice in the protected queue. Classification and downstream remarking must not be confused.

Question 502

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The team should test joins and forwarding separately. Which design objective is best served by this mechanism?

  1. Use Anycast RP to provide redundant RP service across a multicast domain.
  2. Use IGMPv2-style group reports to identify IPv4 receiver membership.
  3. Use PIM sparse mode for receiver-driven multicast path construction.
  4. Use a consistent RP mapping to support any-source multicast group discovery.

Explanation

Correct Answer

B:

For an enterprise telemetry network with multicast subscribers, this mechanism fits the requirement: Use IGMPv2-style group reports to identify IPv4 receiver membership. The design is appropriate because: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. In this scenario, the observed issue is: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The corresponding implementation is: Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports.

Incorrect Answers

A:

Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. The appropriate correction for the reported case is: Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports.

C:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Fixing that different mechanism would not address the current root cause: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router.

D:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Its verification is distinct from the reported condition: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The team should test joins and forwarding separately.

Question 503

At a branch router serving several application classes, a Junos specialist investigates this scenario: A trunk receives correctly PCP-tagged Ethernet frames but their Layer 2 priority is ignored at the receiving switch. The team must validate packet drops by actual queue statistics. Which configuration adjustment should be made first to address this issue?

  1. Tune supported policer bandwidth and burst size to the measured permitted traffic profile.
  2. Attach the appropriate DSCP BA classifier to the trusted ingress interface.
  3. Apply an appropriate IEEE 802.1p classifier on the trusted tagged ingress port.
  4. Map approved voice traffic to an appropriate expedited-forwarding class and backups to a suitable lower class.

Explanation

Correct Answer

C:

For a branch router serving several application classes, the direct corrective action is: Apply an appropriate IEEE 802.1p classifier on the trusted tagged ingress port. This addresses the mechanism: IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. Confirm by checking: A capture and queue counters show tagged priority values mapped to the expected classes. During rollout, validate VLAN tagging and trust boundary before treating all access-port PCP markings as genuine.

Incorrect Answers

A:

Rate policers use token or burst parameters that influence which short bursts are considered conformant. The appropriate correction for the reported case is: Apply an appropriate IEEE 802.1p classifier on the trusted tagged ingress port.

B:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Fixing that different mechanism would not address the current root cause: IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification.

D:

Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. Its verification is distinct from the reported condition: A trunk receives correctly PCP-tagged Ethernet frames but their Layer 2 priority is ignored at the receiving switch. The team must validate packet drops by actual queue statistics.

Question 504

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: A virtual machine moves between leaf switches but stale remote MAC advertisements keep traffic on the old VTEP. The design must avoid forwarding loops during failover. Which technical mechanism most directly explains the symptom?

  1. EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE.
  2. EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior.
  3. EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.
  4. EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location.

Explanation

Correct Answer

D:

For a multihomed data center using redundant Ethernet segments, the governing mechanism is: EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. It explains the reported symptom: A virtual machine moves between leaf switches but stale remote MAC advertisements keep traffic on the old VTEP. The intended response is: Verify advertisement and processing of the relevant MAC mobility extended community or sequence information. Verification: Remote leaves update the affected MAC destination to the new VTEP after the controlled move.

Incorrect Answers

A:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. This alternative mechanism does not match the current fault.

B:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Fixing that different mechanism would not address the current root cause: EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location.

C:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Its verification is distinct from the reported condition: A virtual machine moves between leaf switches but stale remote MAC advertisements keep traffic on the old VTEP. The design must avoid forwarding loops during failover.

Question 505

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: An upstream BGP neighbor must recognize which advertised prefixes belong to a special handling category. The change must not introduce an unwanted autonomous-system route leak. Which operational change most directly resolves the observed failure?

  1. Attach a defined community to only the selected prefixes and configure matching remote policy.
  2. Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix.
  3. Configure the approved internal BGP group with correct peer addresses and peer AS membership.
  4. Configure supported eBGP multihop behavior and reliable local-address selection for the approved peer.

Explanation

Correct Answer

A:

For a large organization using Junos route reflectors, the direct corrective action is: Attach a defined community to only the selected prefixes and configure matching remote policy. This addresses the mechanism: BGP community attributes carry policy tags that importing or exporting routers can match. Confirm by checking: show route extensive or advertised-route output includes the expected community on the intended prefixes. During rollout, verify community propagation scope and avoid accepting arbitrary peer tags as trusted authorization.

Incorrect Answers

B:

Hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection. The appropriate correction for the reported case is: Attach a defined community to only the selected prefixes and configure matching remote policy.

C:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Fixing that different mechanism would not address the current root cause: BGP community attributes carry policy tags that importing or exporting routers can match.

D:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. Its verification is distinct from the reported condition: An upstream BGP neighbor must recognize which advertised prefixes belong to a special handling category. The change must not introduce an unwanted autonomous-system route leak.

Question 506

At an enterprise replacing legacy IP handsets, a Junos specialist investigates this scenario: A high-capacity phone reports insufficient power even though the switch's overall power budget is adequate. The team must check phone support and PoE capacity before cutover. Which underlying distinction should guide troubleshooting?

  1. LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones.
  2. Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions.
  3. A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.
  4. Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices.

Explanation

Correct Answer

B:

For an enterprise replacing legacy IP handsets, the governing mechanism is: Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. It explains the reported symptom: A high-capacity phone reports insufficient power even though the switch's overall power budget is adequate. The intended response is: Check LLDP-MED power negotiation and available power on the phone's switch interface. Verification: Switch and phone agree on the needed power allocation and optional hardware stays enabled.

Incorrect Answers

A:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. This alternative mechanism does not match the current fault.

C:

A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. Fixing that different mechanism would not address the current root cause: supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions.

D:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Its verification is distinct from the reported condition: A high-capacity phone reports insufficient power even though the switch's overall power budget is adequate. The team must check phone support and PoE capacity before cutover.

Question 507

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A BGP router has internal routes in its RIB but should advertise only an authorized subset to an external peer. The change must not introduce an unwanted autonomous-system route leak. Which operational change most directly resolves the observed failure?

  1. Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.
  2. Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified.
  3. Apply a narrowly matched export policy for intended prefixes to the relevant BGP group.
  4. Configure compatible graceful-restart behavior and timers across designated peers.

Explanation

Correct Answer

C:

For a large organization using Junos route reflectors, the direct corrective action is: Apply a narrowly matched export policy for intended prefixes to the relevant BGP group. This addresses the mechanism: BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Confirm by checking: The peer receives only the approved announcements and no internal management subnets. During rollout, account for protocol default export rules and route activity before assuming all table entries advertise.

Incorrect Answers

A:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. The appropriate correction for the reported case is: Apply a narrowly matched export policy for intended prefixes to the relevant BGP group.

B:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Fixing that different mechanism would not address the current root cause: BGP export policy controls which eligible active routes the speaker announces to selected neighbors.

D:

BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. Its verification is distinct from the reported condition: A BGP router has internal routes in its RIB but should advertise only an authorized subset to an external peer. The change must not introduce an unwanted autonomous-system route leak.

Question 508

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The internal forwarding path must remain stable when one uplink fails. Which underlying distinction should guide troubleshooting?

  1. OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.
  2. OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.
  3. OSPF neighbors on a common link must agree on the area identifier used in Hello processing.
  4. A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs.

Explanation

Correct Answer

D:

For a national enterprise designing OSPF between offices, the governing mechanism is: A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. It explains the reported symptom: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The intended response is: Configure the same transit area and peer router identifiers at both virtual-link endpoints. Verification: The virtual link reaches the expected operational state and the remote area receives backbone routes.

Incorrect Answers

A:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. This alternative mechanism does not match the current fault.

B:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Fixing that different mechanism would not address the current root cause: a supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs.

C:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Its verification is distinct from the reported condition: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The internal forwarding path must remain stable when one uplink fails.

Question 509

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A shared Ethernet OSPF segment has more adjacencies than planned and the chosen designated router is unsuitable. The routing change must preserve control-plane consistency across areas. What is the most appropriate correction to implement?

  1. Review interface priority and network type so appropriate eligible routers become DR and BDR.
  2. Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements.
  3. Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.
  4. Check ABR area topology and permitted interarea prefix advertisement for the missing network.

Explanation

Correct Answer

A:

For a university separating multiple OSPF areas, the direct corrective action is: Review interface priority and network type so appropriate eligible routers become DR and BDR. This addresses the mechanism: On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. Confirm by checking: show ospf neighbor shows the intended DR and BDR roles and stable adjacency states. During rollout, avoid forcing DR changes during production without considering adjacency churn.

Incorrect Answers

B:

Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. The appropriate correction for the reported case is: Review interface priority and network type so appropriate eligible routers become DR and BDR.

C:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Fixing that different mechanism would not address the current root cause: on broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies.

D:

OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries. Its verification is distinct from the reported condition: A shared Ethernet OSPF segment has more adjacencies than planned and the chosen designated router is unsuitable. The routing change must preserve control-plane consistency across areas.

Question 510

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: An ASM receiver joins G but routers disagree about the RP responsible for the group. The group traffic must reach interested receivers without flooding other locations. Which operational change most directly resolves the observed failure?

  1. Verify source-facing PIM DR behavior and reachability to the correct rendezvous point.
  2. Configure or correct the intended RP mapping for the affected group range throughout the domain.
  3. Enable the supported SPT behavior and verify source-directed joins where appropriate.
  4. Apply explicit multicast scope or PIM routing policy at the relevant domain boundary.

Explanation

Correct Answer

B:

For a campus distributing IP video to several buildings, the direct corrective action is: Configure or correct the intended RP mapping for the affected group range throughout the domain. This addresses the mechanism: PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Confirm by checking: show pim rps reports the planned RP and receivers join the corresponding tree. During rollout, do not move the RP without validating reachable unicast routing to its address.

Incorrect Answers

A:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. The appropriate correction for the reported case is: Configure or correct the intended RP mapping for the affected group range throughout the domain.

C:

PIM-SM can transition selected traffic from an RP-rooted shared tree to a source-rooted shortest-path tree. Fixing that different mechanism would not address the current root cause: PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs.

D:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Its verification is distinct from the reported condition: An ASM receiver joins G but routers disagree about the RP responsible for the group. The group traffic must reach interested receivers without flooding other locations.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests