mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 49

Question 480

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The improvement must not starve business traffic. What verification result should the engineer expect?

  1. Under load the less-important traffic experiences expected earlier drops while protected traffic is retained.
  2. Queue counters show the intended internal class and egress capture shows appropriate markings.
  3. The workstation's spoofed expedited marking is reset and voice retains the intended priority.
  4. Aggregate throughput stays under the circuit limit while class queues meet their intended bandwidth shares.

Explanation

Correct Answer

D:

For a campus switch team configuring Junos egress queues, the decisive evidence is: Aggregate throughput stays under the circuit limit while class queues meet their intended bandwidth shares. This validates the action: Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy. Because: Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. The appropriate correction for the reported case is: Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy.

B:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Fixing that different mechanism would not address the current root cause: Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported.

C:

The ingress trust boundary decides whether external markings should be accepted or reclassified. Its verification is distinct from the reported condition: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The improvement must not starve business traffic.

Question 481

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An OSPF stub area receives or expects external LSA behavior incompatible with its intended design. The routing change must preserve control-plane consistency across areas. What requirement most specifically calls for this approach?

  1. Use OSPF stub areas to reduce external routing-state exposure in suitable branches.
  2. Use explicit per-interface OSPF area membership to form an approved internal adjacency.
  3. Use OSPF export policy rather than import policy to redistribute selected local routes.
  4. Use identical area configuration on directly adjacent OSPF participants.

Explanation

Correct Answer

A:

For a university separating multiple OSPF areas, this mechanism fits the requirement: Use OSPF stub areas to reduce external routing-state exposure in suitable branches. The design is appropriate because: A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. In this scenario, the observed issue is: An OSPF stub area receives or expects external LSA behavior incompatible with its intended design. The corresponding implementation is: Configure a compatible stub-area type throughout the area and validate ABR default behavior.

Incorrect Answers

B:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. The appropriate correction for the reported case is: Configure a compatible stub-area type throughout the area and validate ABR default behavior.

C:

Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. Fixing that different mechanism would not address the current root cause: a conventional stub area limits external LSAs and uses a suitable default route for outside reachability.

D:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Its verification is distinct from the reported condition: An OSPF stub area receives or expects external LSA behavior incompatible with its intended design. The routing change must preserve control-plane consistency across areas.

Question 482

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: An OSPFv3 ABR has an IPv6 subnet internally but other areas never learn the prefix. The team must validate neighbor state rather than assume basic IP reachability proves routing. What is the most likely design-related cause?

  1. OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.
  2. OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries.
  3. Junos first chooses active routing-table entries using protocol route preference before forwarding installation.
  4. OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments.

Explanation

Correct Answer

B:

For a regional provider operating Junos-based branch routers, the governing mechanism is: OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries. It explains the reported symptom: An OSPFv3 ABR has an IPv6 subnet internally but other areas never learn the prefix. The intended response is: Check ABR area topology and permitted interarea prefix advertisement for the missing network. Verification: The expected interarea prefix LSA and remote IPv6 route appear in the intended area.

Incorrect Answers

A:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. This alternative mechanism does not match the current fault.

C:

Junos first chooses active routing-table entries using protocol route preference before forwarding installation. Fixing that different mechanism would not address the current root cause: OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries.

D:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Its verification is distinct from the reported condition: An OSPFv3 ABR has an IPv6 subnet internally but other areas never learn the prefix. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 483

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The overlay must relearn host reachability without stale tunnel selection. When would the described mechanism be appropriate?

  1. Use EVPN type-4 routes for Ethernet segment discovery among multihomed peers.
  2. Use EVPN route-target policy to control overlay route membership between tenants.
  3. Use EVPN type-5 routes for routed IP-prefix reachability between EVPN sites.
  4. Use EVPN type-2 routes to announce host MAC and optional IP reachability.

Explanation

Correct Answer

C:

For an enterprise migrating virtual machines between racks, this mechanism fits the requirement: Use EVPN type-5 routes for routed IP-prefix reachability between EVPN sites. The design is appropriate because: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. In this scenario, the observed issue is: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The corresponding implementation is: Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets.

Incorrect Answers

A:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. The appropriate correction for the reported case is: Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets.

B:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. Fixing that different mechanism would not address the current root cause: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs.

D:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Its verification is distinct from the reported condition: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The overlay must relearn host reachability without stale tunnel selection. When would the described mechanism be appropriate.

Question 484

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The engineer must verify both BGP EVPN signaling and underlay reachability. Which configuration adjustment should be made first to address this issue?

  1. Select a supported single-active multihoming design and check ESI and DF behavior.
  2. Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes.
  3. Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets.
  4. Enable a supported EVPN BGP signaling relationship with the intended route targets and instances.

Explanation

Correct Answer

D:

For a service provider offering isolated VXLAN services, the direct corrective action is: Enable a supported EVPN BGP signaling relationship with the intended route targets and instances. This addresses the mechanism: EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. Confirm by checking: show route table BGP.evpn.0 or equivalent EVPN table contains valid remote routes. During rollout, verify platform and release-specific EVPN support rather than enabling every address family indiscriminately.

Incorrect Answers

A:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. The appropriate correction for the reported case is: Enable a supported EVPN BGP signaling relationship with the intended route targets and instances.

B:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Fixing that different mechanism would not address the current root cause: EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information.

C:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Its verification is distinct from the reported condition: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 485

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: Two routers in the same enterprise AS exchange IP reachability but their intended iBGP session never establishes. The change must not introduce an unwanted autonomous-system route leak. What protocol behavior accounts for this failure?

  1. iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses.
  2. BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it.
  3. Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship.
  4. Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection.

Explanation

Correct Answer

A:

For a large organization using Junos route reflectors, the governing mechanism is: iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. It explains the reported symptom: Two routers in the same enterprise AS exchange IP reachability but their intended iBGP session never establishes. The intended response is: Configure the approved internal BGP group with correct peer addresses and peer AS membership. Verification: show BGP summary identifies the internal peer in Established state.

Incorrect Answers

B:

BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it. This alternative mechanism does not match the current fault.

C:

Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. Fixing that different mechanism would not address the current root cause: iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses.

D:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Its verification is distinct from the reported condition: Two routers in the same enterprise AS exchange IP reachability but their intended iBGP session never establishes. The change must not introduce an unwanted autonomous-system route leak.

Question 486

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: An enterprise iBGP network cannot scale because every routing speaker requires a direct adjacency with every other speaker. The routing policy must retain intended primary and backup paths. Which configuration adjustment should be made first to address this issue?

  1. Align the designed cluster identifier among redundant reflectors serving the same cluster.
  2. Deploy supported route-reflector clusters and designate approved clients with appropriate topology.
  3. Enable the authorized inet6-unicast family consistently at relevant BGP group or peer scope.
  4. Enable matching supported BGP authentication keys on both sides and test staged replacement.

Explanation

Correct Answer

B:

For a dual-homed business network peering with two upstream providers, the direct corrective action is: Deploy supported route-reflector clusters and designate approved clients with appropriate topology. This addresses the mechanism: Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Confirm by checking: Reflector clients receive BGP routes from other clients through the reflector. During rollout, preserve reflector redundancy and cluster design to avoid hidden routing loops.

Incorrect Answers

A:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. The appropriate correction for the reported case is: Deploy supported route-reflector clusters and designate approved clients with appropriate topology.

C:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Fixing that different mechanism would not address the current root cause: ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection.

D:

Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. Its verification is distinct from the reported condition: An enterprise iBGP network cannot scale because every routing speaker requires a direct adjacency with every other speaker. The routing policy must retain intended primary and backup paths.

Question 487

At an enterprise replacing legacy IP handsets, a Junos specialist investigates this scenario: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The team must check phone support and PoE capacity before cutover. What protocol behavior accounts for this failure?

  1. PoE power classification informs the power source of the powered device's required allocation.
  2. LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones.
  3. A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.
  4. Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices.

Explanation

Correct Answer

C:

For an enterprise replacing legacy IP handsets, the governing mechanism is: A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. It explains the reported symptom: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The intended response is: Configure the intended voice VLAN and data VLAN relationship on the shared access connection. Verification: Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN.

Incorrect Answers

A:

PoE power classification informs the power source of the powered device's required allocation. This alternative mechanism does not match the current fault.

B:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. Fixing that different mechanism would not address the current root cause: a voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.

D:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Its verification is distinct from the reported condition: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The team must check phone support and PoE capacity before cutover.

Question 488

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which design objective is best served by this mechanism?

  1. Use NSSA when a limited external-route origin must exist inside an OSPF area.
  2. Use OSPF traceoptions for short targeted troubleshooting of protocol state transitions.
  3. Use link-local addressing to interpret OSPFv3 IPv6 neighbor and next-hop behavior.
  4. Use a temporary virtual link when an OSPF backbone partition has a valid transit path.

Explanation

Correct Answer

D:

For a regional provider operating Junos-based branch routers, this mechanism fits the requirement: Use a temporary virtual link when an OSPF backbone partition has a valid transit path. The design is appropriate because: A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. In this scenario, the observed issue is: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The corresponding implementation is: Configure the same transit area and peer router identifiers at both virtual-link endpoints.

Incorrect Answers

A:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. The appropriate correction for the reported case is: Configure the same transit area and peer router identifiers at both virtual-link endpoints.

B:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Fixing that different mechanism would not address the current root cause: a supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs.

C:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Its verification is distinct from the reported condition: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 489

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A multicast router drops a received stream even though its physical receiving interface is up. The team should test joins and forwarding separately. Which limitation should guide the change control?

  1. Do not disable loop-prevention checks simply to make unwanted multicast traffic pass.
  2. Do not assume PIM neighbor formation proves that hosts sent IGMP membership.
  3. Monitor register handling and filters so unsolicited sources cannot overwhelm the RP.
  4. Check querier and router-port discovery so memberships do not age out unexpectedly.

Explanation

Correct Answer

A:

For an enterprise telemetry network with multicast subscribers, the relevant safeguard is: Do not disable loop-prevention checks simply to make unwanted multicast traffic pass. It matters while implementing: Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface. The fault involves: Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. The required acceptance result remains: The multicast forwarding state uses the intended RPF interface and packet discard counters stop increasing.

Incorrect Answers

B:

IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. The appropriate correction for the reported case is: Do not disable loop-prevention checks simply to make unwanted multicast traffic pass.

C:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. Fixing that different mechanism would not address the current root cause: multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP.

D:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Its verification is distinct from the reported condition: A multicast router drops a received stream even though its physical receiving interface is up. The team should test joins and forwarding separately.

Question 490

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The change must not introduce an unwanted autonomous-system route leak. What verification result should the engineer expect?

  1. Reflected routes contain expected cluster-list information and survive individual reflector failure.
  2. An intentionally unstable test route shows expected damping and eventual reuse after stability.
  3. Reflector clients receive BGP routes from other clients through the reflector.
  4. show route protocol bgp reveals the selected path and its AS-path sequence.

Explanation

Correct Answer

B:

For a large organization using Junos route reflectors, the decisive evidence is: An intentionally unstable test route shows expected damping and eventual reuse after stability. This validates the action: Evaluate and apply a supported carefully scoped damping policy only where warranted. Because: Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. The appropriate correction for the reported case is: Evaluate and apply a supported carefully scoped damping policy only where warranted.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules.

D:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Its verification is distinct from the reported condition: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The change must not introduce an unwanted autonomous-system route leak.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests