mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 48

Question 470

At a new office connecting VoIP phones to EX access switches, a Junos specialist investigates this scenario: A new IP phone requests a higher supported power class but is limited to a default allocation and fails to start. The rollout must support phones and connected workstations securely. Which precaution should be checked before committing the change?

  1. Do not blindly trust DSCP or 802.1p markings from untrusted downstream computers.
  2. Verify the negotiated class and switch feature support before overriding port power limits.
  3. Do not exceed chassis supply or line-card power availability based only on per-port ratings.
  4. Review platform limits before claiming all phone accessories can receive unlimited PoE.

Explanation

Correct Answer

B:

For a new office connecting VoIP phones to EX access switches, the relevant safeguard is: Verify the negotiated class and switch feature support before overriding port power limits. It matters while implementing: Enable appropriate PoE class handling and compatible power negotiation for the phone. The fault involves: PoE power classification informs the power source of the powered device's required allocation. The required acceptance result remains: Switch power telemetry shows the correct allocated class and the phone operates stably.

Incorrect Answers

A:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. The appropriate correction for the reported case is: Verify the negotiated class and switch feature support before overriding port power limits.

C:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Fixing that different mechanism would not address the current root cause: poE power classification informs the power source of the powered device's required allocation.

D:

Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. Its verification is distinct from the reported condition: A new IP phone requests a higher supported power class but is limited to a default allocation and fails to start. The rollout must support phones and connected workstations securely.

Question 471

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A new ASM sender transmits but remote receivers never learn about the source through their RP. The change must preserve source identity and avoid multicast loops. Which design objective is best served by this mechanism?

  1. Use IGMPv3 INCLUDE source lists for IPv4 source-specific multicast receiver membership.
  2. Use PIM sparse mode for receiver-driven multicast path construction.
  3. Use PIM Register messages to introduce ASM sources to a rendezvous point.
  4. Use source-group entries to trace a single multicast sender's path.

Explanation

Correct Answer

C:

For a live-event venue using routed multicast streaming, this mechanism fits the requirement: Use PIM Register messages to introduce ASM sources to a rendezvous point. The design is appropriate because: In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. In this scenario, the observed issue is: A new ASM sender transmits but remote receivers never learn about the source through their RP. The corresponding implementation is: Verify source-facing PIM DR behavior and reachability to the correct rendezvous point.

Incorrect Answers

A:

IGMPv3 membership records can identify source filters that enable explicit SSM interest. The appropriate correction for the reported case is: Verify source-facing PIM DR behavior and reachability to the correct rendezvous point.

B:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Fixing that different mechanism would not address the current root cause: in PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: A new ASM sender transmits but remote receivers never learn about the source through their RP. The change must preserve source identity and avoid multicast loops.

Question 472

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A BGP update is received but appears hidden because the announced next-hop address cannot be resolved in the routing table. The routing policy must retain intended primary and backup paths. Which observation proves this requirement has been satisfied?

  1. Internal routers resolve the advertised next hop through the enterprise IGP and can forward to the prefix.
  2. show route protocol bgp reveals the selected path and its AS-path sequence.
  3. The peer exchanges a test IPv4 prefix and the route enters inet.0 when eligible.
  4. show route hidden detail no longer reports an unreachable next hop and the prefix becomes eligible.

Explanation

Correct Answer

D:

For a dual-homed business network peering with two upstream providers, the decisive evidence is: show route hidden detail no longer reports an unreachable next hop and the prefix becomes eligible. This validates the action: Repair the underlay route to the received BGP next hop or apply a deliberate next-hop policy. Because: A usable BGP route requires an eligible reachable forwarding next hop before it can become active. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. The appropriate correction for the reported case is: Repair the underlay route to the received BGP next hop or apply a deliberate next-hop policy.

B:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Fixing that different mechanism would not address the current root cause: a usable BGP route requires an eligible reachable forwarding next hop before it can become active.

C:

BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. Its verification is distinct from the reported condition: A BGP update is received but appears hidden because the announced next-hop address cannot be resolved in the routing table. The routing policy must retain intended primary and backup paths.

Question 473

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The team should test joins and forwarding separately. Which operational change most directly resolves the observed failure?

  1. Inspect multicast route, upstream interface and output interface list for the failed group.
  2. Inspect and correct downstream receiver removal and upstream PIM prune processing.
  3. Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface.
  4. Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.

Explanation

Correct Answer

A:

For an enterprise telemetry network with multicast subscribers, the direct corrective action is: Inspect multicast route, upstream interface and output interface list for the failed group. This addresses the mechanism: Multicast forwarding depends on per-group and per-source route state in addition to host membership. Confirm by checking: The expected multicast forwarding entry contains its correct upstream and downstream interfaces. During rollout, correlate RPF and PIM state before making indiscriminate VLAN flooding changes.

Incorrect Answers

B:

PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes. The appropriate correction for the reported case is: Inspect multicast route, upstream interface and output interface list for the failed group.

C:

Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. Fixing that different mechanism would not address the current root cause: multicast forwarding depends on per-group and per-source route state in addition to host membership.

D:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. Its verification is distinct from the reported condition: A multicast receiver fails even though unicast pings and IGMP joins look healthy. The team should test joins and forwarding separately.

Question 474

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: Repeated topology flaps produce transient internal route changes and high routing-process load. The correction must not expose administrative network prefixes. Which design objective is best served by this mechanism?

  1. Use OSPF neighbor-state interpretation to distinguish normal election behavior from failures.
  2. Use SPF diagnostics to identify repeated topology-triggered route recalculation.
  3. Use passive OSPF interfaces for stub LANs without routing neighbors.
  4. Assign unique router IDs to routers participating in the same OSPF routing domain.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, this mechanism fits the requirement: Use SPF diagnostics to identify repeated topology-triggered route recalculation. The design is appropriate because: Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. In this scenario, the observed issue is: Repeated topology flaps produce transient internal route changes and high routing-process load. The corresponding implementation is: Find the unstable interface or neighbor and stabilize its physical or protocol conditions.

Incorrect Answers

A:

OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. The appropriate correction for the reported case is: Find the unstable interface or neighbor and stabilize its physical or protocol conditions.

C:

A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos. Fixing that different mechanism would not address the current root cause: link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB.

D:

The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. Its verification is distinct from the reported condition: Repeated topology flaps produce transient internal route changes and high routing-process load. The correction must not expose administrative network prefixes.

Question 475

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: A malfunctioning device saturates one VLAN with broadcasts and causes widespread host loss. The intended segmentation and loop prevention must remain intact. What would demonstrate a successful correction under test?

  1. A simulated BPDU loss creates a protected state without allowing a loop.
  2. Maximum expected tagged frames traverse every provider hop without oversize drops.
  3. A controlled burst is limited while ordinary ARP and discovery traffic remains functional.
  4. A loop-free topology has one blocked alternate path that activates after a controlled failure.

Explanation

Correct Answer

C:

For a campus network built with Juniper EX switches, the decisive evidence is: A controlled burst is limited while ordinary ARP and discovery traffic remains functional. This validates the action: Apply suitable storm-control thresholds to the affected edge ports. Because: Layer 2 storm control limits specified excessive broadcast or multicast traffic on a port. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. The appropriate correction for the reported case is: Apply suitable storm-control thresholds to the affected edge ports.

B:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Fixing that different mechanism would not address the current root cause: layer 2 storm control limits specified excessive broadcast or multicast traffic on a port.

D:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Its verification is distinct from the reported condition: A malfunctioning device saturates one VLAN with broadcasts and causes widespread host loss. The intended segmentation and loop prevention must remain intact.

Question 476

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: Engineers change a DSCP rewrite rule expecting packets to move into a different local output queue. The network must keep critical application latency within policy. For which use case is this feature the best match?

  1. Use multifield CoS classification when packet markings are absent or untrusted.
  2. Use separate forwarding classes to distinguish traffic treatment by business requirements.
  3. Use packet-loss priority to differentiate discard behavior within forwarding treatment.
  4. Use classification for local queue selection and rewrite for downstream codepoint presentation.

Explanation

Correct Answer

D:

For a congested enterprise WAN carrying video, voice and backups, this mechanism fits the requirement: Use classification for local queue selection and rewrite for downstream codepoint presentation. The design is appropriate because: Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. In this scenario, the observed issue is: Engineers change a DSCP rewrite rule expecting packets to move into a different local output queue. The corresponding implementation is: Fix the relevant ingress classifier or multifield policy rather than only rewriting outgoing DSCP.

Incorrect Answers

A:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. The appropriate correction for the reported case is: Fix the relevant ingress classifier or multifield policy rather than only rewriting outgoing DSCP.

B:

Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. Fixing that different mechanism would not address the current root cause: classification determines internal forwarding class while rewrite rules modify markings on outgoing packets.

C:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. Its verification is distinct from the reported condition: Engineers change a DSCP rewrite rule expecting packets to move into a different local output queue. The network must keep critical application latency within policy.

Question 477

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A multicast video stream floods every port in a VLAN although only two receivers joined. The group traffic must reach interested receivers without flooding other locations. What verification result should the engineer expect?

  1. Only joined receiver ports receive the test multicast frames during stable operation.
  2. show igmp group lists the expected joined group and its receiving interface.
  3. After one RP fails, new group joins reach the surviving RP and active sources remain discoverable.
  4. Group memberships persist across query intervals while idle receivers age out as intended.

Explanation

Correct Answer

A:

For a campus distributing IP video to several buildings, the decisive evidence is: Only joined receiver ports receive the test multicast frames during stable operation. This validates the action: Configure supported IGMP snooping and verify a reachable multicast-router port in the receiver VLAN. Because: IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. The appropriate correction for the reported case is: Configure supported IGMP snooping and verify a reachable multicast-router port in the receiver VLAN.

C:

Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. Fixing that different mechanism would not address the current root cause: IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN.

D:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Its verification is distinct from the reported condition: A multicast video stream floods every port in a VLAN although only two receivers joined. The group traffic must reach interested receivers without flooding other locations.

Question 478

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The design must avoid forwarding loops during failover. What requirement most specifically calls for this approach?

  1. Use EVPN type-2 routes to announce host MAC and optional IP reachability.
  2. Account for VXLAN header overhead when sizing underlay MTU.
  3. Use EVPN type-4 routes for Ethernet segment discovery among multihomed peers.
  4. Use consistent VNIs to extend a selected VLAN across a VXLAN fabric.

Explanation

Correct Answer

B:

For a multihomed data center using redundant Ethernet segments, this mechanism fits the requirement: Account for VXLAN header overhead when sizing underlay MTU. The design is appropriate because: VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. In this scenario, the observed issue is: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The corresponding implementation is: Provide sufficient underlay MTU for the intended inner payload or constrain end-host MTU safely.

Incorrect Answers

A:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. The appropriate correction for the reported case is: Provide sufficient underlay MTU for the intended inner payload or constrain end-host MTU safely.

C:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Fixing that different mechanism would not address the current root cause: VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames.

D:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Its verification is distinct from the reported condition: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The design must avoid forwarding loops during failover.

Question 479

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: Many VLANs should share a small number of spanning-tree topologies but currently use separate inconsistent path designs. The service must preserve tags without bridging unrelated tenants. What risk must the implementation avoid?

  1. Avoid partial region updates that temporarily create different spanning-tree domains.
  2. Check management and voice traffic before moving the physical switch port.
  3. Check instance-to-VLAN mapping agreement across every switch in the region.
  4. Check all intermediary devices rather than changing only the ingress port.

Explanation

Correct Answer

C:

For a provider Ethernet network carrying customer Layer 2 services, the relevant safeguard is: Check instance-to-VLAN mapping agreement across every switch in the region. It matters while implementing: Assign the appropriate VLANs to the intended MST instances and set designated roots. The fault involves: Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances. The required acceptance result remains: show spanning-tree interface reports the planned instance port roles for each mapped VLAN.

Incorrect Answers

A:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. The appropriate correction for the reported case is: Check instance-to-VLAN mapping agreement across every switch in the region.

B:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances.

D:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Its verification is distinct from the reported condition: Many VLANs should share a small number of spanning-tree topologies but currently use separate inconsistent path designs. The service must preserve tags without bridging unrelated tenants.

Question 480

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The improvement must not starve business traffic. What verification result should the engineer expect?

  1. Under load the less-important traffic experiences expected earlier drops while protected traffic is retained.
  2. Queue counters show the intended internal class and egress capture shows appropriate markings.
  3. The workstation's spoofed expedited marking is reset and voice retains the intended priority.
  4. Aggregate throughput stays under the circuit limit while class queues meet their intended bandwidth shares.

Explanation

Correct Answer

D:

For a campus switch team configuring Junos egress queues, the decisive evidence is: Aggregate throughput stays under the circuit limit while class queues meet their intended bandwidth shares. This validates the action: Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy. Because: Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. The appropriate correction for the reported case is: Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy.

B:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Fixing that different mechanism would not address the current root cause: Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported.

C:

The ingress trust boundary decides whether external markings should be accepted or reclassified. Its verification is distinct from the reported condition: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The improvement must not starve business traffic.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests