mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 47

Question 460

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The chosen route must have a valid data-plane next hop. For which use case is this feature the best match?

  1. Use BGP export policy to restrict outbound network advertisements.
  2. Use advertise-inactive selectively when an active static route would suppress BGP advertisement.
  3. Use MED to suggest a preferred inbound interconnection to a cooperating neighbor AS.
  4. Use BGP import policy to control external route acceptance.

Explanation

Correct Answer

D:

For an enterprise core exchanging BGP routes over redundant WAN paths, this mechanism fits the requirement: Use BGP import policy to control external route acceptance. The design is appropriate because: A BGP import policy determines which incoming route advertisements are accepted into the routing table. In this scenario, the observed issue is: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The corresponding implementation is: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.

Incorrect Answers

A:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. The appropriate correction for the reported case is: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.

B:

Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. Fixing that different mechanism would not address the current root cause: a BGP import policy determines which incoming route advertisements are accepted into the routing table.

C:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Its verification is distinct from the reported condition: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The chosen route must have a valid data-plane next hop.

Question 461

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: A forwarding class is classified correctly but receives too little bandwidth on a congested interface. The network must keep critical application latency within policy. Which design objective is best served by this mechanism?

  1. Use scheduler transmit rates to allocate egress bandwidth among traffic classes.
  2. Use shaping when traffic rate smoothing is preferred over immediate discard.
  3. Use strict-priority scheduling for carefully bounded low-latency traffic.
  4. Use 802.1p classification on trusted VLAN-tagged Ethernet traffic.

Explanation

Correct Answer

A:

For a congested enterprise WAN carrying video, voice and backups, this mechanism fits the requirement: Use scheduler transmit rates to allocate egress bandwidth among traffic classes. The design is appropriate because: Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. In this scenario, the observed issue is: A forwarding class is classified correctly but receives too little bandwidth on a congested interface. The corresponding implementation is: Assign appropriate scheduler transmit-rate settings for the required class and validate link capacity.

Incorrect Answers

B:

Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit. The appropriate correction for the reported case is: Assign appropriate scheduler transmit-rate settings for the required class and validate link capacity.

C:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Fixing that different mechanism would not address the current root cause: junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities.

D:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. Its verification is distinct from the reported condition: A forwarding class is classified correctly but receives too little bandwidth on a congested interface. The network must keep critical application latency within policy.

Question 462

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: EVPN route advertisements are received but encapsulated VXLAN data packets fail between leaf switches. The overlay must relearn host reachability without stale tunnel selection. When would the described mechanism be appropriate?

  1. Use consistent VNIs to extend a selected VLAN across a VXLAN fabric.
  2. Use routable VTEP loopbacks and healthy underlay routing to carry VXLAN encapsulated frames.
  3. Use EVPN MAC mobility signaling when a host changes its overlay attachment location.
  4. Use EVPN type-3 routes for overlay BUM membership and replication discovery.

Explanation

Correct Answer

B:

For an enterprise migrating virtual machines between racks, this mechanism fits the requirement: Use routable VTEP loopbacks and healthy underlay routing to carry VXLAN encapsulated frames. The design is appropriate because: VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. In this scenario, the observed issue is: EVPN route advertisements are received but encapsulated VXLAN data packets fail between leaf switches. The corresponding implementation is: Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability.

Incorrect Answers

A:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. The appropriate correction for the reported case is: Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability.

C:

EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. Fixing that different mechanism would not address the current root cause: VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity.

D:

EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership. Its verification is distinct from the reported condition: EVPN route advertisements are received but encapsulated VXLAN data packets fail between leaf switches. The overlay must relearn host reachability without stale tunnel selection. When would the described mechanism be appropriate.

Question 463

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A user plugs a small switch into a campus edge port and introduces unexpected spanning-tree control traffic. The service must preserve tags without bridging unrelated tenants. When would the described mechanism be appropriate?

  1. Account for Q-in-Q encapsulation overhead when planning L2 transport MTU.
  2. Use access VLAN assignment for a single untagged user segment.
  3. Use BPDU protection on host access ports to prevent rogue Layer 2 bridges.
  4. Use MSTP instance mapping to scale spanning-tree topologies for many VLANs.

Explanation

Correct Answer

C:

For a provider Ethernet network carrying customer Layer 2 services, this mechanism fits the requirement: Use BPDU protection on host access ports to prevent rogue Layer 2 bridges. The design is appropriate because: BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. In this scenario, the observed issue is: A user plugs a small switch into a campus edge port and introduces unexpected spanning-tree control traffic. The corresponding implementation is: Enable the supported BPDU protection behavior on designated host-facing ports.

Incorrect Answers

A:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. The appropriate correction for the reported case is: Enable the supported BPDU protection behavior on designated host-facing ports.

B:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages.

D:

Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances. Its verification is distinct from the reported condition: A user plugs a small switch into a campus edge port and introduces unexpected spanning-tree control traffic. The service must preserve tags without bridging unrelated tenants. When would the described mechanism be appropriate.

Question 464

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: Two candidate BGP paths are comparable in earlier attributes but one was learned via eBGP and the other iBGP. The change must not introduce an unwanted autonomous-system route leak. What risk must the implementation avoid?

  1. Verify provider documentation and do not broaden peer trust to arbitrary autonomous systems.
  2. Avoid inserting a catchall accept before security and route-leak protections.
  3. Do not confuse BGP local preference with Junos protocol-level route preference.
  4. Do not confuse eBGP-versus-iBGP tie breaking with global Junos route preference.

Explanation

Correct Answer

D:

For a large organization using Junos route reflectors, the relevant safeguard is: Do not confuse eBGP-versus-iBGP tie breaking with global Junos route preference. It matters while implementing: Review peer type and the complete path decision chain before adjusting selection policy. The fault involves: Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. The required acceptance result remains: The active BGP path reflects eBGP preference only when earlier criteria do not decide first.

Incorrect Answers

A:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. The appropriate correction for the reported case is: Do not confuse eBGP-versus-iBGP tie breaking with global Junos route preference.

B:

Junos policy terms are evaluated in configured order and a terminating action can end processing early. Fixing that different mechanism would not address the current root cause: junos BGP best-path logic generally prefers the external route when preceding comparisons tie.

C:

BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones. Its verification is distinct from the reported condition: Two candidate BGP paths are comparable in earlier attributes but one was learned via eBGP and the other iBGP. The change must not introduce an unwanted autonomous-system route leak.

Question 465

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A control-plane restart triggers avoidable route withdrawal despite forwarding continuing on a capable BGP neighbor. The change must not introduce an unwanted autonomous-system route leak. What risk must the implementation avoid?

  1. Plan stale-route timeout and avoid assuming graceful restart survives all dataplane failures.
  2. Base limits on planned growth and supportable recovery actions rather than an arbitrary tiny threshold.
  3. Do not assume a remote AS must honor MED or compare MED across all unrelated ASes.
  4. Restrict BGP port access to approved neighbors rather than exposing it globally.

Explanation

Correct Answer

A:

For a large organization using Junos route reflectors, the relevant safeguard is: Plan stale-route timeout and avoid assuming graceful restart survives all dataplane failures. It matters while implementing: Configure compatible graceful-restart behavior and timers across designated peers. The fault involves: BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. The required acceptance result remains: A controlled restart retains eligible forwarding for the negotiated grace interval and recovers correctly.

Incorrect Answers

B:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. The appropriate correction for the reported case is: Plan stale-route timeout and avoid assuming graceful restart survives all dataplane failures.

C:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Fixing that different mechanism would not address the current root cause: BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions.

D:

BGP depends on a reachable TCP transport path, normally using destination port 179. Its verification is distinct from the reported condition: A control-plane restart triggers avoidable route withdrawal despite forwarding continuing on a capable BGP neighbor. The change must not introduce an unwanted autonomous-system route leak.

Question 466

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A BGP neighbor uses an AS number above the two-byte range but older configuration assumes a 16-bit value. The diagnosis must distinguish a healthy BGP session from eligible received routes. What would demonstrate a successful correction under test?

  1. The upstream receives the appended path and a controlled test prefers the primary ingress.
  2. The BGP OPEN handshake succeeds with the full expected ASN.
  3. Only intended prefix lengths pass the import or export policy.
  4. The authorized peer establishes while a test using incorrect credentials is refused.

Explanation

Correct Answer

B:

For a managed network team troubleshooting an internet edge, the decisive evidence is: The BGP OPEN handshake succeeds with the full expected ASN. This validates the action: Configure the correct complete AS value on both peers using supported BGP capability negotiation. Because: BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. The appropriate correction for the reported case is: Configure the correct complete AS value on both peers using supported BGP capability negotiation.

C:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. Fixing that different mechanism would not address the current root cause: BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing.

D:

Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. Its verification is distinct from the reported condition: A BGP neighbor uses an AS number above the two-byte range but older configuration assumes a 16-bit value. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 467

At a hospital onboarding diverse employee devices, a Junos specialist investigates this scenario: An unmanaged visitor device does not answer 802.1X challenges yet should reach a limited onboarding network. Critical permitted endpoints need a documented authentication fallback. What verification result should the engineer expect?

  1. The intended printer gains restricted access while an unrecognized MAC does not inherit privileged resources.
  2. The wrong-credential test client reaches only the intended reject services and not protected LANs.
  3. The unauthenticated nonresponsive test client reaches only the approved onboarding services.
  4. An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state.

Explanation

Correct Answer

C:

For a hospital onboarding diverse employee devices, the decisive evidence is: The unauthenticated nonresponsive test client reaches only the approved onboarding services. This validates the action: Configure supported guest VLAN behavior and its restricted connectivity policy on the access port. Because: A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. The appropriate correction for the reported case is: Configure supported guest VLAN behavior and its restricted connectivity policy on the access port.

B:

A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. Fixing that different mechanism would not address the current root cause: a guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it.

D:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Its verification is distinct from the reported condition: An unmanaged visitor device does not answer 802.1X challenges yet should reach a limited onboarding network. Critical permitted endpoints need a documented authentication fallback.

Question 468

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: An OSPF-enabled router has a reachable interface but has no adjacency on that subnet. The internal forwarding path must remain stable when one uplink fails. What is the most appropriate correction to implement?

  1. Configure a supported OSPF point-to-point network type consistently on the dedicated link.
  2. Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process.
  3. Configure a consistent NSSA area and permitted redistribution at the branch ASBR.
  4. Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.

Explanation

Correct Answer

D:

For a national enterprise designing OSPF between offices, the direct corrective action is: Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters. This addresses the mechanism: OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Confirm by checking: The peer appears in show ospf neighbor and the local interface appears in show ospf interface. During rollout, do not activate the routing protocol on an untrusted or management-facing interface accidentally.

Incorrect Answers

A:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. The appropriate correction for the reported case is: Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.

B:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Fixing that different mechanism would not address the current root cause: OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.

C:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Its verification is distinct from the reported condition: An OSPF-enabled router has a reachable interface but has no adjacency on that subnet. The internal forwarding path must remain stable when one uplink fails.

Question 469

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: A guest must accept access conditions in a browser before reaching a limited public LAN. The switch must distinguish identity failures from absent authentication responses. Which limitation should guide the change control?

  1. Avoid mixing MAC RADIUS and captive portal unsupported modes without required 802.1X handling.
  2. Do not confuse a server timeout with an explicit Access-Reject or permit a broad uncontrolled bypass.
  3. Treat MAC addresses as spoofable and pair this method with restrictive network segmentation.
  4. Preserve break-glass and management paths when enabling access control on an active switch.

Explanation

Correct Answer

A:

For a managed office network with printers and laptops, the relevant safeguard is: Avoid mixing MAC RADIUS and captive portal unsupported modes without required 802.1X handling. It matters while implementing: Configure supported captive-portal access and browser redirection with suitable authentication infrastructure. The fault involves: Captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow. The required acceptance result remains: The guest sees the authorized portal and only obtains permitted access after the expected process.

Incorrect Answers

B:

Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. The appropriate correction for the reported case is: Avoid mixing MAC RADIUS and captive portal unsupported modes without required 802.1X handling.

C:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. Fixing that different mechanism would not address the current root cause: captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow.

D:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Its verification is distinct from the reported condition: A guest must accept access conditions in a browser before reaching a limited public LAN. The switch must distinguish identity failures from absent authentication responses.

Question 470

At a new office connecting VoIP phones to EX access switches, a Junos specialist investigates this scenario: A new IP phone requests a higher supported power class but is limited to a default allocation and fails to start. The rollout must support phones and connected workstations securely. Which precaution should be checked before committing the change?

  1. Do not blindly trust DSCP or 802.1p markings from untrusted downstream computers.
  2. Verify the negotiated class and switch feature support before overriding port power limits.
  3. Do not exceed chassis supply or line-card power availability based only on per-port ratings.
  4. Review platform limits before claiming all phone accessories can receive unlimited PoE.

Explanation

Correct Answer

B:

For a new office connecting VoIP phones to EX access switches, the relevant safeguard is: Verify the negotiated class and switch feature support before overriding port power limits. It matters while implementing: Enable appropriate PoE class handling and compatible power negotiation for the phone. The fault involves: PoE power classification informs the power source of the powered device's required allocation. The required acceptance result remains: Switch power telemetry shows the correct allocated class and the phone operates stably.

Incorrect Answers

A:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. The appropriate correction for the reported case is: Verify the negotiated class and switch feature support before overriding port power limits.

C:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Fixing that different mechanism would not address the current root cause: poE power classification informs the power source of the powered device's required allocation.

D:

Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. Its verification is distinct from the reported condition: A new IP phone requests a higher supported power class but is limited to a default allocation and fails to start. The rollout must support phones and connected workstations securely.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests