mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 46

Question 450

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The routing change must preserve control-plane consistency across areas. Which observation proves this requirement has been satisfied?

  1. show ospf database and downstream routes reflect only the approved summaries.
  2. An injected forwarding failure brings down the affected neighbor within the planned interval.
  3. Area routers learn a usable default route without inappropriate external LSAs.
  4. Other OSPFv3 routers learn the specified external IPv6 prefix without unrelated statics.

Explanation

Correct Answer

B:

For a university separating multiple OSPF areas, the decisive evidence is: An injected forwarding failure brings down the affected neighbor within the planned interval. This validates the action: Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection. Because: Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. The appropriate correction for the reported case is: Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection.

C:

A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. Fixing that different mechanism would not address the current root cause: Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers.

D:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Its verification is distinct from the reported condition: A critical OSPF adjacency takes too long to detect loss when the physical interface stays electrically up. The routing change must preserve control-plane consistency across areas.

Question 451

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A route filter intended to allow a single aggregate accidentally accepts many more-specific customer prefixes. The change must not introduce an unwanted autonomous-system route leak. Which response best restores the intended behavior?

  1. Configure reasonable warning and hard limits appropriate to each authorized address family.
  2. Correct the peer-as setting for the specific external BGP neighbor and recheck the session.
  3. Choose exact or bounded prefix-length matching appropriate to the advertisement contract.
  4. Enable the authorized inet6-unicast family consistently at relevant BGP group or peer scope.

Explanation

Correct Answer

C:

For a large organization using Junos route reflectors, the direct corrective action is: Choose exact or bounded prefix-length matching appropriate to the advertisement contract. This addresses the mechanism: Junos route filters distinguish exact matching from longer or longer-prefix patterns. Confirm by checking: Only intended prefix lengths pass the import or export policy. During rollout, review dual-stack prefixes and boundary masks before applying generalized longer matches.

Incorrect Answers

A:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. The appropriate correction for the reported case is: Choose exact or bounded prefix-length matching appropriate to the advertisement contract.

B:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Fixing that different mechanism would not address the current root cause: junos route filters distinguish exact matching from longer or longer-prefix patterns.

D:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Its verification is distinct from the reported condition: A route filter intended to allow a single aggregate accidentally accepts many more-specific customer prefixes. The change must not introduce an unwanted autonomous-system route leak.

Question 452

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: A switch places latency-sensitive voice frames and bulk backups into the same egress queue despite different treatment requirements. The network must keep critical application latency within policy. Which design objective is best served by this mechanism?

  1. Use classification for local queue selection and rewrite for downstream codepoint presentation.
  2. Use 802.1p classification on trusted VLAN-tagged Ethernet traffic.
  3. Use strict-priority scheduling for carefully bounded low-latency traffic.
  4. Use separate forwarding classes to distinguish traffic treatment by business requirements.

Explanation

Correct Answer

D:

For a congested enterprise WAN carrying video, voice and backups, this mechanism fits the requirement: Use separate forwarding classes to distinguish traffic treatment by business requirements. The design is appropriate because: Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior. In this scenario, the observed issue is: A switch places latency-sensitive voice frames and bulk backups into the same egress queue despite different treatment requirements. The corresponding implementation is: Map approved voice traffic to an appropriate expedited-forwarding class and backups to a suitable lower class.

Incorrect Answers

A:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. The appropriate correction for the reported case is: Map approved voice traffic to an appropriate expedited-forwarding class and backups to a suitable lower class.

B:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. Fixing that different mechanism would not address the current root cause: Junos Class of Service uses forwarding classes to group packets for selected queuing and scheduling behavior.

C:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Its verification is distinct from the reported condition: A switch places latency-sensitive voice frames and bulk backups into the same egress queue despite different treatment requirements. The network must keep critical application latency within policy.

Question 453

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A shared Ethernet OSPF segment has more adjacencies than planned and the chosen designated router is unsuitable. The correction must not expose administrative network prefixes. Which technical mechanism most directly explains the symptom?

  1. On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies.
  2. OSPF interface network type influences neighbor formation and whether DR and BDR election is used.
  3. OSPF neighbors on a common link must agree on the area identifier used in Hello processing.
  4. Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB.

Explanation

Correct Answer

A:

For a healthcare organization connecting redundant facilities, the governing mechanism is: On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. It explains the reported symptom: A shared Ethernet OSPF segment has more adjacencies than planned and the chosen designated router is unsuitable. The intended response is: Review interface priority and network type so appropriate eligible routers become DR and BDR. Verification: show ospf neighbor shows the intended DR and BDR roles and stable adjacency states.

Incorrect Answers

B:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. This alternative mechanism does not match the current fault.

C:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Fixing that different mechanism would not address the current root cause: on broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies.

D:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. Its verification is distinct from the reported condition: A shared Ethernet OSPF segment has more adjacencies than planned and the chosen designated router is unsuitable. The correction must not expose administrative network prefixes.

Question 454

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: Two route reflectors use inconsistent cluster settings and reflected path behavior differs after failover. The diagnosis must distinguish a healthy BGP session from eligible received routes. What is the most likely design-related cause?

  1. Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection.
  2. Route reflector cluster identifiers participate in loop detection on reflected BGP paths.
  3. Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases.
  4. BGP community attributes carry policy tags that importing or exporting routers can match.

Explanation

Correct Answer

B:

For a managed network team troubleshooting an internet edge, the governing mechanism is: Route reflector cluster identifiers participate in loop detection on reflected BGP paths. It explains the reported symptom: Two route reflectors use inconsistent cluster settings and reflected path behavior differs after failover. The intended response is: Align the designed cluster identifier among redundant reflectors serving the same cluster. Verification: Reflected routes contain expected cluster-list information and survive individual reflector failure.

Incorrect Answers

A:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. This alternative mechanism does not match the current fault.

C:

Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. Fixing that different mechanism would not address the current root cause: route reflector cluster identifiers participate in loop detection on reflected BGP paths.

D:

BGP community attributes carry policy tags that importing or exporting routers can match. Its verification is distinct from the reported condition: Two route reflectors use inconsistent cluster settings and reflected path behavior differs after failover. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 455

At a hospital onboarding diverse employee devices, a Junos specialist investigates this scenario: A switch port configured for 802.1X, MAC RADIUS and captive portal grants unexpected access because the fallback sequence is misunderstood. Critical permitted endpoints need a documented authentication fallback. Which underlying distinction should guide troubleshooting?

  1. MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy.
  2. 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access.
  3. Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response.
  4. A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it.

Explanation

Correct Answer

C:

For a hospital onboarding diverse employee devices, the governing mechanism is: Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. It explains the reported symptom: A switch port configured for 802.1X, MAC RADIUS and captive portal grants unexpected access because the fallback sequence is misunderstood. The intended response is: Inspect and configure the supported 802.1X then MAC RADIUS then portal method order for that port. Verification: Each simulated endpoint type follows the correct method and receives its matching access policy.

Incorrect Answers

A:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. This alternative mechanism does not match the current fault.

B:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Fixing that different mechanism would not address the current root cause: multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response.

D:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Its verification is distinct from the reported condition: A switch port configured for 802.1X, MAC RADIUS and captive portal grants unexpected access because the fallback sequence is misunderstood. Critical permitted endpoints need a documented authentication fallback.

Question 456

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: Two application hosts should communicate with each other but remain isolated from other tenant communities on the same primary VLAN. The intended segmentation and loop prevention must remain intact. Which design objective is best served by this mechanism?

  1. Use private VLAN isolated ports for same-subnet tenant isolation.
  2. Use spanning-tree priority to control root selection for an MSTP topology.
  3. Use VSTP when different VLANs require distinct Layer 2 forwarding trees.
  4. Use private VLAN communities for grouped same-subnet connectivity.

Explanation

Correct Answer

D:

For a campus network built with Juniper EX switches, this mechanism fits the requirement: Use private VLAN communities for grouped same-subnet connectivity. The design is appropriate because: Private VLAN community ports support intra-community traffic while preventing communication with other communities. In this scenario, the observed issue is: Two application hosts should communicate with each other but remain isolated from other tenant communities on the same primary VLAN. The corresponding implementation is: Create the intended community membership and permitted promiscuous gateway association.

Incorrect Answers

A:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. The appropriate correction for the reported case is: Create the intended community membership and permitted promiscuous gateway association.

B:

Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance. Fixing that different mechanism would not address the current root cause: private VLAN community ports support intra-community traffic while preventing communication with other communities.

C:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. Its verification is distinct from the reported condition: Two application hosts should communicate with each other but remain isolated from other tenant communities on the same primary VLAN. The intended segmentation and loop prevention must remain intact.

Question 457

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An enterprise wants to protect a BGP session from a spoofed adjacent TCP peer. The diagnosis must distinguish a healthy BGP session from eligible received routes. Which design objective is best served by this mechanism?

  1. Use BGP neighbor authentication to harden trusted peer sessions.
  2. Use iBGP to distribute BGP-learned routes within one autonomous system.
  3. Use AS-path prepending to influence inbound traffic toward another available path.
  4. Use inet6-unicast BGP family to advertise and receive IPv6 network reachability.

Explanation

Correct Answer

A:

For a managed network team troubleshooting an internet edge, this mechanism fits the requirement: Use BGP neighbor authentication to harden trusted peer sessions. The design is appropriate because: Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. In this scenario, the observed issue is: An enterprise wants to protect a BGP session from a spoofed adjacent TCP peer. The corresponding implementation is: Enable matching supported BGP authentication keys on both sides and test staged replacement.

Incorrect Answers

B:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. The appropriate correction for the reported case is: Enable matching supported BGP authentication keys on both sides and test staged replacement.

C:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. Fixing that different mechanism would not address the current root cause: compatible TCP-level BGP authentication methods can verify the configured neighbor relationship.

D:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. Its verification is distinct from the reported condition: An enterprise wants to protect a BGP session from a spoofed adjacent TCP peer. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 458

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The change must retain both link resilience and correct VLAN isolation. Which limitation should guide the change control?

  1. Verify secondary-to-primary mappings on each switch in a multichassis deployment.
  2. Use only on appropriate port roles or legitimate topology changes may be disrupted.
  3. Avoid partial region updates that temporarily create different spanning-tree domains.
  4. Check interface roles and platform behavior before enabling loop protection broadly.

Explanation

Correct Answer

B:

For a large enterprise updating redundant switch links, the relevant safeguard is: Use only on appropriate port roles or legitimate topology changes may be disrupted. It matters while implementing: Configure supported spanning-tree root protection on the relevant downstream boundary. The fault involves: Root protection can prevent a specified port from accepting an unexpected superior root advertisement. The required acceptance result remains: A test superior BPDU is blocked and the authorized root stays unchanged.

Incorrect Answers

A:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. The appropriate correction for the reported case is: Use only on appropriate port roles or legitimate topology changes may be disrupted.

C:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. Fixing that different mechanism would not address the current root cause: root protection can prevent a specified port from accepting an unexpected superior root advertisement.

D:

Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. Its verification is distinct from the reported condition: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The change must retain both link resilience and correct VLAN isolation.

Question 459

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: Multicast packets never cross an inter-router link and no PIM adjacency appears although IP unicast works. The corrected tree must respect source and group authorization. Which limitation should guide the change control?

  1. Avoid using reserved link-local multicast groups for arbitrary enterprise streams.
  2. Check membership and forwarding behavior after changes to avoid blocking critical legitimate receivers.
  3. Avoid enabling PIM on unrelated edge ports or firewall zones by default.
  4. Verify unicast routing to the source or RP before expecting successful reverse-path checks.

Explanation

Correct Answer

C:

For a multimedia training network running Junos multicast routers, the relevant safeguard is: Avoid enabling PIM on unrelated edge ports or firewall zones by default. It matters while implementing: Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic. The fault involves: PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. The required acceptance result remains: show pim neighbors lists the expected adjacent router on the planned interface.

Incorrect Answers

A:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. The appropriate correction for the reported case is: Avoid enabling PIM on unrelated edge ports or firewall zones by default.

B:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Fixing that different mechanism would not address the current root cause: PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges.

D:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Its verification is distinct from the reported condition: Multicast packets never cross an inter-router link and no PIM adjacency appears although IP unicast works. The corrected tree must respect source and group authorization.

Question 460

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The chosen route must have a valid data-plane next hop. For which use case is this feature the best match?

  1. Use BGP export policy to restrict outbound network advertisements.
  2. Use advertise-inactive selectively when an active static route would suppress BGP advertisement.
  3. Use MED to suggest a preferred inbound interconnection to a cooperating neighbor AS.
  4. Use BGP import policy to control external route acceptance.

Explanation

Correct Answer

D:

For an enterprise core exchanging BGP routes over redundant WAN paths, this mechanism fits the requirement: Use BGP import policy to control external route acceptance. The design is appropriate because: A BGP import policy determines which incoming route advertisements are accepted into the routing table. In this scenario, the observed issue is: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The corresponding implementation is: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.

Incorrect Answers

A:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. The appropriate correction for the reported case is: Attach a scoped import policy matching authorized prefixes and explicitly rejecting prohibited ones.

B:

Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. Fixing that different mechanism would not address the current root cause: a BGP import policy determines which incoming route advertisements are accepted into the routing table.

C:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Its verification is distinct from the reported condition: A transit neighbor sends several unwanted networks and the receiving Junos router must accept only approved prefixes. The chosen route must have a valid data-plane next hop.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests