mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 39

Question 380

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The routing change must preserve control-plane consistency across areas. Which operational result would most clearly confirm the fix?

  1. Branch routers receive a default route and reach the approved upstream network.
  2. show ospf database and downstream routes reflect only the approved summaries.
  3. The neighbor leaves ExStart and reaches Full with synchronized link-state databases.
  4. The missing prefix is visible in an appropriate LSA and the downstream route becomes active.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, the decisive evidence is: The missing prefix is visible in an appropriate LSA and the downstream route becomes active. This validates the action: Compare show ospf database and LSAs against the intended origin and area boundaries. Because: The link-state database and area LSA contents determine which routes the OSPF calculation can derive. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. The appropriate correction for the reported case is: Compare show ospf database and LSAs against the intended origin and area boundaries.

B:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Fixing that different mechanism would not address the current root cause: the link-state database and area LSA contents determine which routes the OSPF calculation can derive.

C:

Database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link. Its verification is distinct from the reported condition: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The routing change must preserve control-plane consistency across areas.

Question 381

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: An iBGP speaker advertises a learned external prefix but internal clients cannot reach the external provider next hop. The chosen route must have a valid data-plane next hop. What requirement most specifically calls for this approach?

  1. Use next-hop self when internal clients cannot route to external BGP next-hop addresses.
  2. Use next-hop resolution to determine BGP route eligibility for active forwarding.
  3. Use consistent cluster-ID design for redundant route reflectors in one cluster.
  4. Use BGP prefix limits to protect route-table capacity from excessive peer announcements.

Explanation

Correct Answer

A:

For an enterprise core exchanging BGP routes over redundant WAN paths, this mechanism fits the requirement: Use next-hop self when internal clients cannot route to external BGP next-hop addresses. The design is appropriate because: iBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. In this scenario, the observed issue is: An iBGP speaker advertises a learned external prefix but internal clients cannot reach the external provider next hop. The corresponding implementation is: Apply approved next-hop self behavior at the correct iBGP advertisement boundary.

Incorrect Answers

B:

A usable BGP route requires an eligible reachable forwarding next hop before it can become active. The appropriate correction for the reported case is: Apply approved next-hop self behavior at the correct iBGP advertisement boundary.

C:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. Fixing that different mechanism would not address the current root cause: iBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it.

D:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Its verification is distinct from the reported condition: An iBGP speaker advertises a learned external prefix but internal clients cannot reach the external provider next hop. The chosen route must have a valid data-plane next hop.

Question 382

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: An adjacency flaps sporadically and ordinary summary commands do not explain the event sequence. The internal forwarding path must remain stable when one uplink fails. When would the described mechanism be appropriate?

  1. Use identical area configuration on directly adjacent OSPF participants.
  2. Use OSPF traceoptions for short targeted troubleshooting of protocol state transitions.
  3. Use a selective OSPF external default route for simple branch egress.
  4. Use OSPF export policy to originate selected external routes from an ASBR.

Explanation

Correct Answer

B:

For a national enterprise designing OSPF between offices, this mechanism fits the requirement: Use OSPF traceoptions for short targeted troubleshooting of protocol state transitions. The design is appropriate because: Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. In this scenario, the observed issue is: An adjacency flaps sporadically and ordinary summary commands do not explain the event sequence. The corresponding implementation is: Enable limited OSPF traceoptions with bounded logging, capture the failure and remove them afterward.

Incorrect Answers

A:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. The appropriate correction for the reported case is: Enable limited OSPF traceoptions with bounded logging, capture the failure and remove them afterward.

C:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. Fixing that different mechanism would not address the current root cause: junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully.

D:

Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. Its verification is distinct from the reported condition: An adjacency flaps sporadically and ordinary summary commands do not explain the event sequence. The internal forwarding path must remain stable when one uplink fails. When would the described mechanism be appropriate.

Question 383

At a branch router serving several application classes, a Junos specialist investigates this scenario: A busy output queue suffers severe tail drop and interactive applications need controlled early loss behavior. The team must validate packet drops by actual queue statistics. What important rollout safeguard is most relevant here?

  1. Do not trust arbitrary endpoint DSCP values simply because a VLAN tag is present.
  2. Review fragment behavior and protocol matches before relying on broad address-only conditions.
  3. Avoid aggressive early drops that harm short or sensitive application flows.
  4. Verify the actual output interface and aggregate hierarchy rather than binding a map to the wrong unit.

Explanation

Correct Answer

C:

For a branch router serving several application classes, the relevant safeguard is: Avoid aggressive early drops that harm short or sensitive application flows. It matters while implementing: Apply a suitable RED or weighted drop profile through the appropriate scheduler. The fault involves: A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. The required acceptance result remains: Congestion tests show the intended early-drop curve without unbounded queue growth.

Incorrect Answers

A:

The ingress trust boundary decides whether external markings should be accepted or reclassified. The appropriate correction for the reported case is: Avoid aggressive early drops that harm short or sensitive application flows.

B:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Fixing that different mechanism would not address the current root cause: a Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion.

D:

A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. Its verification is distinct from the reported condition: A busy output queue suffers severe tail drop and interactive applications need controlled early loss behavior. The team must validate packet drops by actual queue statistics.

Question 384

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: A malfunctioning device saturates one VLAN with broadcasts and causes widespread host loss. The change must retain both link resilience and correct VLAN isolation. Which response best restores the intended behavior?

  1. Configure the gateway-facing port with proper promiscuous association for the private VLAN topology.
  2. Configure supported VSTP membership and root priorities for the chosen VLANs.
  3. Set the intended VLAN membership on the access logical interface and verify the port mode.
  4. Apply suitable storm-control thresholds to the affected edge ports.

Explanation

Correct Answer

D:

For a large enterprise updating redundant switch links, the direct corrective action is: Apply suitable storm-control thresholds to the affected edge ports. This addresses the mechanism: Layer 2 storm control limits specified excessive broadcast or multicast traffic on a port. Confirm by checking: A controlled burst is limited while ordinary ARP and discovery traffic remains functional. During rollout, avoid very low thresholds that block legitimate discovery bursts.

Incorrect Answers

A:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. The appropriate correction for the reported case is: Apply suitable storm-control thresholds to the affected edge ports.

B:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. Fixing that different mechanism would not address the current root cause: layer 2 storm control limits specified excessive broadcast or multicast traffic on a port.

C:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: A malfunctioning device saturates one VLAN with broadcasts and causes widespread host loss. The change must retain both link resilience and correct VLAN isolation.

Question 385

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The routing policy must retain intended primary and backup paths. Which limitation should guide the change control?

  1. Avoid blanket damping that may suppress legitimate reachability and delay recovery.
  2. Avoid broad allow-as-in exceptions without a documented multi-AS design.
  3. Preserve reflector redundancy and cluster design to avoid hidden routing loops.
  4. Coordinate secret rotations to avoid synchronized loss of redundant sessions.

Explanation

Correct Answer

A:

For a dual-homed business network peering with two upstream providers, the relevant safeguard is: Avoid blanket damping that may suppress legitimate reachability and delay recovery. It matters while implementing: Evaluate and apply a supported carefully scoped damping policy only where warranted. The fault involves: Route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules. The required acceptance result remains: An intentionally unstable test route shows expected damping and eventual reuse after stability.

Incorrect Answers

B:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. The appropriate correction for the reported case is: Avoid blanket damping that may suppress legitimate reachability and delay recovery.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: route-flap damping can suppress repeatedly changing paths according to configured penalties and reuse rules.

D:

Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. Its verification is distinct from the reported condition: A repeatedly unstable external prefix creates constant BGP updates and path recalculation. The routing policy must retain intended primary and backup paths.

Question 386

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The routing change must preserve control-plane consistency across areas. What verification result should the engineer expect?

  1. show ospf3 neighbor indicates a healthy IPv6 adjacency and IPv6 routes are learned.
  2. An IPv6 destination installs with an expected link-local next hop and forwards successfully.
  3. Each OSPF peer reports a distinct expected router ID and adjacency state becomes stable.
  4. The local type-7 advertisement appears and translated external reachability is available outside the NSSA.

Explanation

Correct Answer

B:

For a university separating multiple OSPF areas, the decisive evidence is: An IPv6 destination installs with an expected link-local next hop and forwards successfully. This validates the action: Validate the IPv6 link-local adjacency and correct outgoing logical interface for the route. Because: OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. The appropriate correction for the reported case is: Validate the IPv6 link-local adjacency and correct outgoing logical interface for the route.

C:

The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. Fixing that different mechanism would not address the current root cause: OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.

D:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Its verification is distinct from the reported condition: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The routing change must preserve control-plane consistency across areas.

Question 387

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: A new ASM sender transmits but remote receivers never learn about the source through their RP. The corrected tree must respect source and group authorization. Which operational change most directly resolves the observed failure?

  1. Inspect the source and group state to diagnose the correct sender-specific distribution tree.
  2. Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic.
  3. Verify source-facing PIM DR behavior and reachability to the correct rendezvous point.
  4. Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports.

Explanation

Correct Answer

C:

For a multimedia training network running Junos multicast routers, the direct corrective action is: Verify source-facing PIM DR behavior and reachability to the correct rendezvous point. This addresses the mechanism: In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. Confirm by checking: The RP learns the source and joined downstream receivers begin receiving the stream. During rollout, monitor register handling and filters so unsolicited sources cannot overwhelm the RP.

Incorrect Answers

A:

(S,G) multicast state identifies one particular source S and destination group G. The appropriate correction for the reported case is: Verify source-facing PIM DR behavior and reachability to the correct rendezvous point.

B:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. Fixing that different mechanism would not address the current root cause: in PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP.

D:

IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. Its verification is distinct from the reported condition: A new ASM sender transmits but remote receivers never learn about the source through their RP. The corrected tree must respect source and group authorization.

Question 388

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The change must preserve source identity and avoid multicast loops. Which precaution should be checked before committing the change?

  1. Do not confuse IPv6 multicast scope with the IPv4 private addressing range.
  2. Check membership and forwarding behavior after changes to avoid blocking critical legitimate receivers.
  3. Do not interpret (*,G) shared-tree membership as proof that a particular source is forwarding.
  4. Check IGMPv3 support and SSM address-range policy before switching away from ASM.

Explanation

Correct Answer

D:

For a live-event venue using routed multicast streaming, the relevant safeguard is: Check IGMPv3 support and SSM address-range policy before switching away from ASM. It matters while implementing: Use an approved SSM group and source-aware receiver membership with compatible PIM behavior. The fault involves: Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. The required acceptance result remains: Only packets from the selected source reach receivers of that SSM group.

Incorrect Answers

A:

IPv6 multicast destinations begin in the FF00::/8 range and include scope information. The appropriate correction for the reported case is: Check IGMPv3 support and SSM address-range policy before switching away from ASM.

B:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Fixing that different mechanism would not address the current root cause: source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point.

C:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The change must preserve source identity and avoid multicast loops.

Question 389

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: Traffic needs to use two genuinely equal-cost OSPF paths but only one forwarding next hop appears. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which limitation should guide the change control?

  1. Avoid enabling ECMP across paths with incompatible MTU or traffic-security policies.
  2. Do not reset stable adjacencies merely because a non-DR neighbor is TwoWay on broadcast media.
  3. Avoid forcing DR changes during production without considering adjacency churn.
  4. Verify translation and filtering so unwanted branch routes do not escape the area.

Explanation

Correct Answer

A:

For a regional provider operating Junos-based branch routers, the relevant safeguard is: Avoid enabling ECMP across paths with incompatible MTU or traffic-security policies. It matters while implementing: Validate equal route metrics and supported forwarding next-hop installation for both eligible paths. The fault involves: OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior. The required acceptance result remains: The selected destination shows multiple eligible next hops and traffic load sharing is observable.

Incorrect Answers

B:

OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. The appropriate correction for the reported case is: Avoid enabling ECMP across paths with incompatible MTU or traffic-security policies.

C:

On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. Fixing that different mechanism would not address the current root cause: OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior.

D:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Its verification is distinct from the reported condition: Traffic needs to use two genuinely equal-cost OSPF paths but only one forwarding next hop appears. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 390

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: A tenant requires only one active forwarding attachment at a time but both dual-homed PEs transmit simultaneously. The overlay must relearn host reachability without stale tunnel selection. For which use case is this feature the best match?

  1. Use EVPN type-1 routes for Ethernet segment reachability and efficient multihoming withdrawal.
  2. Use single-active EVPN multihoming when only one attached PE should forward at a time.
  3. Use EVPN type-4 routes for Ethernet segment discovery among multihomed peers.
  4. Use all-active EVPN multihoming for simultaneous eligible forwarding across redundant PEs.

Explanation

Correct Answer

B:

For an enterprise migrating virtual machines between racks, this mechanism fits the requirement: Use single-active EVPN multihoming when only one attached PE should forward at a time. The design is appropriate because: EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. In this scenario, the observed issue is: A tenant requires only one active forwarding attachment at a time but both dual-homed PEs transmit simultaneously. The corresponding implementation is: Select a supported single-active multihoming design and check ESI and DF behavior.

Incorrect Answers

A:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. The appropriate correction for the reported case is: Select a supported single-active multihoming design and check ESI and DF behavior.

C:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Fixing that different mechanism would not address the current root cause: EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE.

D:

EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention. Its verification is distinct from the reported condition: A tenant requires only one active forwarding attachment at a time but both dual-homed PEs transmit simultaneously. The overlay must relearn host reachability without stale tunnel selection.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests