mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 38

Question 370

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The solution should not give workstation traffic untrusted voice privileges. What would demonstrate a successful correction under test?

  1. The phone adopts the approved voice VLAN tag and registers using the expected voice network.
  2. Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN.
  3. Phone packets receive intended priority during congestion and desktop traffic cannot impersonate it.
  4. The phone stays powered under a representative simultaneous high-load endpoint test.

Explanation

Correct Answer

B:

For a branch introducing an IP telephony access layer, the decisive evidence is: Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN. This validates the action: Configure the intended voice VLAN and data VLAN relationship on the shared access connection. Because: A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. The appropriate correction for the reported case is: Configure the intended voice VLAN and data VLAN relationship on the shared access connection.

C:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. Fixing that different mechanism would not address the current root cause: a voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.

D:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Its verification is distinct from the reported condition: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The solution should not give workstation traffic untrusted voice privileges.

Question 371

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A route is visible locally but network engineers confuse accepting it into a RIB with advertising it as a new OSPF external LSA. The correction must not expose administrative network prefixes. What important rollout safeguard is most relevant here?

  1. Verify IPv6 link-local interface reachability and security filters before assuming IPv4 OSPF proves readiness.
  2. Distinguish topology LSAs from summary policy to avoid accidental intra-area isolation.
  3. Check policy direction and default behavior before applying a broad accept term.
  4. Check address families and filtering carefully to avoid importing every static IPv6 route.

Explanation

Correct Answer

C:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Check policy direction and default behavior before applying a broad accept term. It matters while implementing: Apply the policy at the hierarchy appropriate to redistribution rather than assuming import creates advertisements. The fault involves: Junos OSPF export governs eligible external route origination while import filtering has different route-selection effects. The required acceptance result remains: The intended external LSA appears only after the correct export policy is active.

Incorrect Answers

A:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. The appropriate correction for the reported case is: Check policy direction and default behavior before applying a broad accept term.

B:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Fixing that different mechanism would not address the current root cause: junos OSPF export governs eligible external route origination while import filtering has different route-selection effects.

D:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Its verification is distinct from the reported condition: A route is visible locally but network engineers confuse accepting it into a RIB with advertising it as a new OSPF external LSA. The correction must not expose administrative network prefixes.

Question 372

At a school building a restricted guest onboarding network, a Junos specialist investigates this scenario: A packet capture shows client EAPOL frames but no RADIUS transaction and engineers believe the laptop should contact RADIUS directly. Only approved identities may enter privileged enterprise segments. Which precaution should be checked before committing the change?

  1. Do not confuse a server timeout with an explicit Access-Reject or permit a broad uncontrolled bypass.
  2. Treat MAC addresses as spoofable and pair this method with restrictive network segmentation.
  3. Do not grant full access merely because the client can exchange EAP packets.
  4. Protect shared secrets and ensure the RADIUS server permits the correct switch as a client.

Explanation

Correct Answer

D:

For a school building a restricted guest onboarding network, the relevant safeguard is: Protect shared secrets and ensure the RADIUS server permits the correct switch as a client. It matters while implementing: Verify switch-side RADIUS connectivity and authenticator configuration rather than redirecting the client to the server. The fault involves: In common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server. The required acceptance result remains: An EAPOL attempt leads to the intended RADIUS Access-Request and a resulting authorization decision.

Incorrect Answers

A:

Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. The appropriate correction for the reported case is: Protect shared secrets and ensure the RADIUS server permits the correct switch as a client.

B:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. Fixing that different mechanism would not address the current root cause: in common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server.

C:

A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. Its verification is distinct from the reported condition: A packet capture shows client EAPOL frames but no RADIUS transaction and engineers believe the laptop should contact RADIUS directly. Only approved identities may enter privileged enterprise segments.

Question 373

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The improvement must not starve business traffic. What protocol behavior accounts for this failure?

  1. Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure.
  2. A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested.
  3. The ingress trust boundary decides whether external markings should be accepted or reclassified.
  4. Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets.

Explanation

Correct Answer

A:

For a campus switch team configuring Junos egress queues, the governing mechanism is: Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. It explains the reported symptom: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The intended response is: Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification. Verification: Under load the less-important traffic experiences expected earlier drops while protected traffic is retained.

Incorrect Answers

B:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. This alternative mechanism does not match the current fault.

C:

The ingress trust boundary decides whether external markings should be accepted or reclassified. Fixing that different mechanism would not address the current root cause: junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure.

D:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Its verification is distinct from the reported condition: Two traffic types share a forwarding class but one must be dropped earlier during sustained congestion. The improvement must not starve business traffic.

Question 374

At a branch router serving several application classes, a Junos specialist investigates this scenario: A branch wants to smooth excess traffic over time but a policy immediately discards every burst above a fixed threshold. The team must validate packet drops by actual queue statistics. What is the most appropriate correction to implement?

  1. Apply a suitable RED or weighted drop profile through the appropriate scheduler.
  2. Use appropriate egress shaping for the traffic that must be rate-smoothed instead of indiscriminate ingress policing.
  3. Apply an appropriate IEEE 802.1p classifier on the trusted tagged ingress port.
  4. Create a narrowly matched classifier filter and apply it at the correct ingress logical interface.

Explanation

Correct Answer

B:

For a branch router serving several application classes, the direct corrective action is: Use appropriate egress shaping for the traffic that must be rate-smoothed instead of indiscriminate ingress policing. This addresses the mechanism: Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit. Confirm by checking: A burst is transmitted at a controlled rate without the same avoidable tail drops. During rollout, account for added buffer delay and do not overshape real-time voice streams.

Incorrect Answers

A:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. The appropriate correction for the reported case is: Use appropriate egress shaping for the traffic that must be rate-smoothed instead of indiscriminate ingress policing.

C:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. Fixing that different mechanism would not address the current root cause: shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit.

D:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Its verification is distinct from the reported condition: A branch wants to smooth excess traffic over time but a policy immediately discards every burst above a fixed threshold. The team must validate packet drops by actual queue statistics.

Question 375

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A broad policy accept term precedes a specific reject term and restricted prefixes are still announced. The diagnosis must distinguish a healthy BGP session from eligible received routes. Which technical mechanism most directly explains the symptom?

  1. AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection.
  2. iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses.
  3. Junos policy terms are evaluated in configured order and a terminating action can end processing early.
  4. A BGP import policy determines which incoming route advertisements are accepted into the routing table.

Explanation

Correct Answer

C:

For a managed network team troubleshooting an internet edge, the governing mechanism is: Junos policy terms are evaluated in configured order and a terminating action can end processing early. It explains the reported symptom: A broad policy accept term precedes a specific reject term and restricted prefixes are still announced. The intended response is: Place specific prefix rejection before a broader permitted match in the relevant policy. Verification: A policy test or advertised-route output confirms restricted prefixes are no longer accepted.

Incorrect Answers

A:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. This alternative mechanism does not match the current fault.

B:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Fixing that different mechanism would not address the current root cause: junos policy terms are evaluated in configured order and a terminating action can end processing early.

D:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. Its verification is distinct from the reported condition: A broad policy accept term precedes a specific reject term and restricted prefixes are still announced. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 376

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A switch's MSTP region connects to a different spanning-tree domain and path selection behaves unexpectedly. The proposed behavior must be validated on actual switching ports. Which limitation should guide the change control?

  1. Preserve redundant root placement and test topology changes outside production peaks.
  2. Avoid partial region updates that temporarily create different spanning-tree domains.
  3. Use only on appropriate port roles or legitimate topology changes may be disrupted.
  4. Do not assume per-instance MST details traverse an incompatible external region unchanged.

Explanation

Correct Answer

D:

For a data-center access fabric using tagged trunks, the relevant safeguard is: Do not assume per-instance MST details traverse an incompatible external region unchanged. It matters while implementing: Inspect boundary-port roles and configure supported interoperation at the domain edge. The fault involves: MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. The required acceptance result remains: Root and port states remain stable on both sides during controlled link transitions.

Incorrect Answers

A:

Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance. The appropriate correction for the reported case is: Do not assume per-instance MST details traverse an incompatible external region unchanged.

B:

MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. Fixing that different mechanism would not address the current root cause: MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior.

C:

Root protection can prevent a specified port from accepting an unexpected superior root advertisement. Its verification is distinct from the reported condition: A switch's MSTP region connects to a different spanning-tree domain and path selection behaves unexpectedly. The proposed behavior must be validated on actual switching ports.

Question 377

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The diagnosis must distinguish a healthy BGP session from eligible received routes. For which use case is this feature the best match?

  1. Use AS-path prepending to influence inbound traffic toward another available path.
  2. Use BGP graceful restart for controlled routing-process interruptions with compatible peers.
  3. Use AS-path length as a BGP path selection discriminator after higher criteria match.
  4. Use BGP communities to classify groups of prefixes for routing policy.

Explanation

Correct Answer

A:

For a managed network team troubleshooting an internet edge, this mechanism fits the requirement: Use AS-path prepending to influence inbound traffic toward another available path. The design is appropriate because: AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. In this scenario, the observed issue is: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The corresponding implementation is: Apply targeted AS-path prepend in an authorized export policy for the backup link.

Incorrect Answers

B:

BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. The appropriate correction for the reported case is: Apply targeted AS-path prepend in an authorized export policy for the backup link.

C:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Fixing that different mechanism would not address the current root cause: AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection.

D:

BGP community attributes carry policy tags that importing or exporting routers can match. Its verification is distinct from the reported condition: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 378

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: A campus needs certain incoming traffic to enter a VLAN based on packet attributes rather than only the fixed physical port. The change must retain both link resilience and correct VLAN isolation. Which underlying distinction should guide troubleshooting?

  1. An untagged Ethernet access port places endpoint traffic into its configured access VLAN.
  2. Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN.
  3. IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.
  4. BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages.

Explanation

Correct Answer

B:

For a large enterprise updating redundant switch links, the governing mechanism is: Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. It explains the reported symptom: A campus needs certain incoming traffic to enter a VLAN based on packet attributes rather than only the fixed physical port. The intended response is: Configure a supported Layer 2 firewall filter with the intended VLAN assignment action. Verification: Matching test traffic enters the designated VLAN while nonmatching traffic follows default handling.

Incorrect Answers

A:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. This alternative mechanism does not match the current fault.

C:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Fixing that different mechanism would not address the current root cause: filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN.

D:

BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. Its verification is distinct from the reported condition: A campus needs certain incoming traffic to enter a VLAN based on packet attributes rather than only the fixed physical port. The change must retain both link resilience and correct VLAN isolation.

Question 379

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: Two routers exchange IPv4 OSPF routes but never discover each other for the IPv6 routing process. The internal forwarding path must remain stable when one uplink fails. Which operational result would most clearly confirm the fix?

  1. show ospf interface reports costs appropriate to the configured link speeds.
  2. An IPv6 destination installs with an expected link-local next hop and forwards successfully.
  3. show ospf3 neighbor indicates a healthy IPv6 adjacency and IPv6 routes are learned.
  4. An injected forwarding failure brings down the affected neighbor within the planned interval.

Explanation

Correct Answer

C:

For a national enterprise designing OSPF between offices, the decisive evidence is: show ospf3 neighbor indicates a healthy IPv6 adjacency and IPv6 routes are learned. This validates the action: Configure the intended OSPFv3 area and IPv6-enabled link interfaces on both peers. Because: OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain. The appropriate correction for the reported case is: Configure the intended OSPFv3 area and IPv6-enabled link interfaces on both peers.

B:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Fixing that different mechanism would not address the current root cause: OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments.

D:

Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. Its verification is distinct from the reported condition: Two routers exchange IPv4 OSPF routes but never discover each other for the IPv6 routing process. The internal forwarding path must remain stable when one uplink fails.

Question 380

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The routing change must preserve control-plane consistency across areas. Which operational result would most clearly confirm the fix?

  1. Branch routers receive a default route and reach the approved upstream network.
  2. show ospf database and downstream routes reflect only the approved summaries.
  3. The neighbor leaves ExStart and reaches Full with synchronized link-state databases.
  4. The missing prefix is visible in an appropriate LSA and the downstream route becomes active.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, the decisive evidence is: The missing prefix is visible in an appropriate LSA and the downstream route becomes active. This validates the action: Compare show ospf database and LSAs against the intended origin and area boundaries. Because: The link-state database and area LSA contents determine which routes the OSPF calculation can derive. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. The appropriate correction for the reported case is: Compare show ospf database and LSAs against the intended origin and area boundaries.

B:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Fixing that different mechanism would not address the current root cause: the link-state database and area LSA contents determine which routes the OSPF calculation can derive.

C:

Database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link. Its verification is distinct from the reported condition: Routers report Full neighbors but one route is missing and technicians only inspect the forwarding table. The routing change must preserve control-plane consistency across areas.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests