mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 37

Question 360

At a branch router serving several application classes, a Junos specialist investigates this scenario: Users report poor application performance but staff rely solely on interface utilization and ignore per-queue drops. The team must validate packet drops by actual queue statistics. Which precaution should be checked before committing the change?

  1. Do not treat packet-loss priority as a substitute for guaranteed bandwidth or physical capacity.
  2. Control priority traffic volume to avoid starving all other egress queues.
  3. Check both classification and rewrite stages because they solve different problems.
  4. Do not infer an absence of congestion from a low five-minute average utilization value alone.

Explanation

Correct Answer

D:

For a branch router serving several application classes, the relevant safeguard is: Do not infer an absence of congestion from a low five-minute average utilization value alone. It matters while implementing: Inspect Junos interface queue statistics and correlate drops with traffic class and times. The fault involves: Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. The required acceptance result remains: A representative load shows which class drops packets and the verified correction reduces them.

Incorrect Answers

A:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. The appropriate correction for the reported case is: Do not infer an absence of congestion from a low five-minute average utilization value alone.

B:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Fixing that different mechanism would not address the current root cause: per-queue counters reveal forwarding class use, transmission and discard behavior during congestion.

C:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Its verification is distinct from the reported condition: Users report poor application performance but staff rely solely on interface utilization and ignore per-queue drops. The team must validate packet drops by actual queue statistics.

Question 361

At a branch router serving several application classes, a Junos specialist investigates this scenario: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The team must validate packet drops by actual queue statistics. What is the most appropriate correction to implement?

  1. Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy.
  2. Configure an appropriate constrained high-priority scheduler for the approved real-time class.
  3. Inspect Junos interface queue statistics and correlate drops with traffic class and times.
  4. Create a narrowly matched classifier filter and apply it at the correct ingress logical interface.

Explanation

Correct Answer

A:

For a branch router serving several application classes, the direct corrective action is: Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy. This addresses the mechanism: Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. Confirm by checking: Aggregate throughput stays under the circuit limit while class queues meet their intended bandwidth shares. During rollout, confirm platform feature support and monitor shaping delays for latency-sensitive traffic.

Incorrect Answers

B:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. The appropriate correction for the reported case is: Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy.

C:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. Fixing that different mechanism would not address the current root cause: Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported.

D:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Its verification is distinct from the reported condition: An enterprise shapes a WAN uplink but class scheduling behaves unpredictably within the aggregate cap. The team must validate packet drops by actual queue statistics.

Question 362

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: Multiple PEs attach to one Ethernet segment but cannot discover consistent peers for multihoming decisions. The design must avoid forwarding loops during failover. Which operational result would most clearly confirm the fix?

  1. Remote PEs update reachability promptly when the attached PE withdraws its Ethernet segment route.
  2. Each PE sees its expected remote multihoming peers and a consistent segment identity.
  3. Only matching tenant MAC and prefix advertisements enter each isolated EVPN instance.
  4. A maximum-size approved test payload crosses the VXLAN tunnel without fragmentation-related failure.

Explanation

Correct Answer

B:

For a multihomed data center using redundant Ethernet segments, the decisive evidence is: Each PE sees its expected remote multihoming peers and a consistent segment identity. This validates the action: Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes. Because: EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. The appropriate correction for the reported case is: Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes.

C:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. Fixing that different mechanism would not address the current root cause: EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment.

D:

VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. Its verification is distinct from the reported condition: Multiple PEs attach to one Ethernet segment but cannot discover consistent peers for multihoming decisions. The design must avoid forwarding loops during failover.

Question 363

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Two application hosts should communicate with each other but remain isolated from other tenant communities on the same primary VLAN. The change must retain both link resilience and correct VLAN isolation. Which response best restores the intended behavior?

  1. Map the isolated ports to the private VLAN design and configure the approved gateway-facing port.
  2. Configure supported LACP or static aggregated Ethernet on both ends as appropriate.
  3. Create the intended community membership and permitted promiscuous gateway association.
  4. Configure supported provider bridging with a distinct service tag for each tenant context.

Explanation

Correct Answer

C:

For a large enterprise updating redundant switch links, the direct corrective action is: Create the intended community membership and permitted promiscuous gateway association. This addresses the mechanism: Private VLAN community ports support intra-community traffic while preventing communication with other communities. Confirm by checking: Hosts in the same community communicate and cross-community test frames are blocked. During rollout, document shared gateway reachability and do not assume the policy inspects routed IP traffic.

Incorrect Answers

A:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. The appropriate correction for the reported case is: Create the intended community membership and permitted promiscuous gateway association.

B:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. Fixing that different mechanism would not address the current root cause: private VLAN community ports support intra-community traffic while preventing communication with other communities.

D:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Its verification is distinct from the reported condition: Two application hosts should communicate with each other but remain isolated from other tenant communities on the same primary VLAN. The change must retain both link resilience and correct VLAN isolation.

Question 364

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The intended segmentation and loop prevention must remain intact. Which operational change most directly resolves the observed failure?

  1. Set supported bridge priorities so designated distribution switches become root and backup root.
  2. Configure the gateway-facing port with proper promiscuous association for the private VLAN topology.
  3. Map the isolated ports to the private VLAN design and configure the approved gateway-facing port.
  4. Configure supported spanning-tree root protection on the relevant downstream boundary.

Explanation

Correct Answer

D:

For a campus network built with Juniper EX switches, the direct corrective action is: Configure supported spanning-tree root protection on the relevant downstream boundary. This addresses the mechanism: Root protection can prevent a specified port from accepting an unexpected superior root advertisement. Confirm by checking: A test superior BPDU is blocked and the authorized root stays unchanged. During rollout, use only on appropriate port roles or legitimate topology changes may be disrupted.

Incorrect Answers

A:

Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance. The appropriate correction for the reported case is: Configure supported spanning-tree root protection on the relevant downstream boundary.

B:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. Fixing that different mechanism would not address the current root cause: root protection can prevent a specified port from accepting an unexpected superior root advertisement.

C:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. Its verification is distinct from the reported condition: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The intended segmentation and loop prevention must remain intact.

Question 365

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The change must preserve source identity and avoid multicast loops. When would the described mechanism be appropriate?

  1. Use PIM bootstrap-based RP discovery in compatible sparse-mode domains.
  2. Use Anycast RP to provide redundant RP service across a multicast domain.
  3. Use a consistent RP mapping to support any-source multicast group discovery.
  4. Use SSM for an application with a known, explicitly selected multicast source.

Explanation

Correct Answer

A:

For a live-event venue using routed multicast streaming, this mechanism fits the requirement: Use PIM bootstrap-based RP discovery in compatible sparse-mode domains. The design is appropriate because: PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. In this scenario, the observed issue is: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The corresponding implementation is: Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope.

Incorrect Answers

B:

Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. The appropriate correction for the reported case is: Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope.

C:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Fixing that different mechanism would not address the current root cause: PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain.

D:

Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. Its verification is distinct from the reported condition: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The change must preserve source identity and avoid multicast loops. When would the described mechanism be appropriate.

Question 366

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: An enterprise receives multiple paths from one neighboring AS and wants to influence which entry that AS uses. The change must not introduce an unwanted autonomous-system route leak. Which technical mechanism most directly explains the symptom?

  1. Junos BGP best-path logic generally prefers the external route when preceding comparisons tie.
  2. BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy.
  3. iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses.
  4. BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions.

Explanation

Correct Answer

B:

For a large organization using Junos route reflectors, the governing mechanism is: BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. It explains the reported symptom: An enterprise receives multiple paths from one neighboring AS and wants to influence which entry that AS uses. The intended response is: Apply intended MED values for comparable advertisements and validate the peer's MED treatment. Verification: The cooperating neighbor selects the intended ingress for otherwise matching routes.

Incorrect Answers

A:

Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. This alternative mechanism does not match the current fault.

C:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Fixing that different mechanism would not address the current root cause: BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy.

D:

BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. Its verification is distinct from the reported condition: An enterprise receives multiple paths from one neighboring AS and wants to influence which entry that AS uses. The change must not introduce an unwanted autonomous-system route leak.

Question 367

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: An isolated receiver VLAN stops forwarding multicast after a period because host membership information expires. The corrected tree must respect source and group authorization. What important rollout safeguard is most relevant here?

  1. Verify unicast routing to the source or RP before expecting successful reverse-path checks.
  2. Check membership and forwarding behavior after changes to avoid blocking critical legitimate receivers.
  3. Avoid running competing unsupported querier configurations without election planning.
  4. Check querier and router-port discovery so memberships do not age out unexpectedly.

Explanation

Correct Answer

C:

For a multimedia training network running Junos multicast routers, the relevant safeguard is: Avoid running competing unsupported querier configurations without election planning. It matters while implementing: Provide an approved IGMP querier or routed multicast interface for the VLAN. The fault involves: IGMP membership maintenance relies on periodic queries from a suitable multicast querier. The required acceptance result remains: Group memberships persist across query intervals while idle receivers age out as intended.

Incorrect Answers

A:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. The appropriate correction for the reported case is: Avoid running competing unsupported querier configurations without election planning.

B:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Fixing that different mechanism would not address the current root cause: IGMP membership maintenance relies on periodic queries from a suitable multicast querier.

D:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Its verification is distinct from the reported condition: An isolated receiver VLAN stops forwarding multicast after a period because host membership information expires. The corrected tree must respect source and group authorization.

Question 368

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An OSPF connection on a shared segment must reject unauthorized routing speakers. The routing change must preserve control-plane consistency across areas. Which response best restores the intended behavior?

  1. Review interface priority and network type so appropriate eligible routers become DR and BDR.
  2. Enable compatible BFD sessions for the approved OSPF neighbors and test failure detection.
  3. Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.
  4. Enable a compatible supported authentication method and matching keys for both authorized peers.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, the direct corrective action is: Enable a compatible supported authentication method and matching keys for both authorized peers. This addresses the mechanism: OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. Confirm by checking: Correctly configured peers form an adjacency and an invalid-key test is rejected. During rollout, coordinate key rotation to avoid simultaneous loss of all redundant routing adjacencies.

Incorrect Answers

A:

On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. The appropriate correction for the reported case is: Enable a compatible supported authentication method and matching keys for both authorized peers.

B:

Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. Fixing that different mechanism would not address the current root cause: OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.

C:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Its verification is distinct from the reported condition: An OSPF connection on a shared segment must reject unauthorized routing speakers. The routing change must preserve control-plane consistency across areas.

Question 369

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: OSPF automatically assigned metrics do not distinguish two high-speed interfaces at the intended precision. The routing change must preserve control-plane consistency across areas. What verification result should the engineer expect?

  1. show ospf interface reports costs appropriate to the configured link speeds.
  2. The intended path has lower total cost and appears as the active route for a test prefix.
  3. Expected transit adjacencies reach Full while eligible non-DR neighbors may remain TwoWay.
  4. The peers reach Full state and show ospf interface reports the planned area on both sides.

Explanation

Correct Answer

A:

For a university separating multiple OSPF areas, the decisive evidence is: show ospf interface reports costs appropriate to the configured link speeds. This validates the action: Set a suitable reference bandwidth for automatic cost calculation on relevant OSPF speakers. Because: OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. The appropriate correction for the reported case is: Set a suitable reference bandwidth for automatic cost calculation on relevant OSPF speakers.

C:

OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. Fixing that different mechanism would not address the current root cause: OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain.

D:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Its verification is distinct from the reported condition: OSPF automatically assigned metrics do not distinguish two high-speed interfaces at the intended precision. The routing change must preserve control-plane consistency across areas.

Question 370

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The solution should not give workstation traffic untrusted voice privileges. What would demonstrate a successful correction under test?

  1. The phone adopts the approved voice VLAN tag and registers using the expected voice network.
  2. Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN.
  3. Phone packets receive intended priority during congestion and desktop traffic cannot impersonate it.
  4. The phone stays powered under a representative simultaneous high-load endpoint test.

Explanation

Correct Answer

B:

For a branch introducing an IP telephony access layer, the decisive evidence is: Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN. This validates the action: Configure the intended voice VLAN and data VLAN relationship on the shared access connection. Because: A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. The appropriate correction for the reported case is: Configure the intended voice VLAN and data VLAN relationship on the shared access connection.

C:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. Fixing that different mechanism would not address the current root cause: a voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic.

D:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Its verification is distinct from the reported condition: An IP phone and a computer share an access port but both are placed in the same data segment against policy. The solution should not give workstation traffic untrusted voice privileges.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests