mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 41

Question 400

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A one-way bridging condition causes a blocking port to stop receiving BPDUs and risk forwarding a loop. The proposed behavior must be validated on actual switching ports. Which technical mechanism most directly explains the symptom?

  1. MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior.
  2. Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states.
  3. Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain.
  4. Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear.

Explanation

Correct Answer

D:

For a data-center access fabric using tagged trunks, the governing mechanism is: Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. It explains the reported symptom: A one-way bridging condition causes a blocking port to stop receiving BPDUs and risk forwarding a loop. The intended response is: Enable supported loop protection on applicable redundant switching links. Verification: A simulated BPDU loss creates a protected state without allowing a loop.

Incorrect Answers

A:

MSTP region boundaries interact with neighboring spanning-tree variants through common spanning-tree behavior. This alternative mechanism does not match the current fault.

B:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Fixing that different mechanism would not address the current root cause: loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear.

C:

Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. Its verification is distinct from the reported condition: A one-way bridging condition causes a blocking port to stop receiving BPDUs and risk forwarding a loop. The proposed behavior must be validated on actual switching ports.

Question 401

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The improvement must not starve business traffic. For which use case is this feature the best match?

  1. Use BA DSCP classification when trustworthy upstream packet markings exist.
  2. Use per-queue statistics to diagnose CoS congestion rather than relying on aggregate utilization.
  3. Use multifield CoS classification when packet markings are absent or untrusted.
  4. Use trusted classification boundaries to prevent unauthorized QoS escalation.

Explanation

Correct Answer

A:

For a campus switch team configuring Junos egress queues, this mechanism fits the requirement: Use BA DSCP classification when trustworthy upstream packet markings exist. The design is appropriate because: A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. In this scenario, the observed issue is: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The corresponding implementation is: Attach the appropriate DSCP BA classifier to the trusted ingress interface.

Incorrect Answers

B:

Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. The appropriate correction for the reported case is: Attach the appropriate DSCP BA classifier to the trusted ingress interface.

C:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. Fixing that different mechanism would not address the current root cause: a behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.

D:

The ingress trust boundary decides whether external markings should be accepted or reclassified. Its verification is distinct from the reported condition: A provider supplies correctly DSCP-marked packets but the Junos edge handles all traffic as best effort. The improvement must not starve business traffic.

Question 402

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A redundant Layer 2 ring creates a broadcast storm when multiple paths forward simultaneously. The service must preserve tags without bridging unrelated tenants. Which configuration adjustment should be made first to address this issue?

  1. Verify MAC learning and the relevant source port/VLAN association.
  2. Enable a consistent MSTP topology and verify the expected alternate-port state.
  3. Enable supported MVRP on intended links and validate the dynamically registered VLAN membership.
  4. Set the intended VLAN membership on the access logical interface and verify the port mode.

Explanation

Correct Answer

B:

For a provider Ethernet network carrying customer Layer 2 services, the direct corrective action is: Enable a consistent MSTP topology and verify the expected alternate-port state. This addresses the mechanism: Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Confirm by checking: A loop-free topology has one blocked alternate path that activates after a controlled failure. During rollout, do not disable STP on an uncontrolled ring just to force all links forwarding.

Incorrect Answers

A:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. The appropriate correction for the reported case is: Enable a consistent MSTP topology and verify the expected alternate-port state.

C:

Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. Fixing that different mechanism would not address the current root cause: spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states.

D:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: A redundant Layer 2 ring creates a broadcast storm when multiple paths forward simultaneously. The service must preserve tags without bridging unrelated tenants.

Question 403

At an enterprise replacing legacy IP handsets, a Junos specialist investigates this scenario: A phone boots on one switch but repeatedly power-cycles when many phones connect to another switch. The team must check phone support and PoE capacity before cutover. Which limitation should guide the change control?

  1. Review platform limits before claiming all phone accessories can receive unlimited PoE.
  2. Verify the negotiated class and switch feature support before overriding port power limits.
  3. Do not exceed chassis supply or line-card power availability based only on per-port ratings.
  4. Do not blindly trust DSCP or 802.1p markings from untrusted downstream computers.

Explanation

Correct Answer

C:

For an enterprise replacing legacy IP handsets, the relevant safeguard is: Do not exceed chassis supply or line-card power availability based only on per-port ratings. It matters while implementing: Verify total PoE capacity and allocate sufficient per-port power for the installed phones. The fault involves: PoE availability depends on available switch power budget and each attached device's negotiated consumption. The required acceptance result remains: The phone stays powered under a representative simultaneous high-load endpoint test.

Incorrect Answers

A:

Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. The appropriate correction for the reported case is: Do not exceed chassis supply or line-card power availability based only on per-port ratings.

B:

PoE power classification informs the power source of the powered device's required allocation. Fixing that different mechanism would not address the current root cause: poE availability depends on available switch power budget and each attached device's negotiated consumption.

D:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. Its verification is distinct from the reported condition: A phone boots on one switch but repeatedly power-cycles when many phones connect to another switch. The team must check phone support and PoE capacity before cutover.

Question 404

At a corporate campus enforcing wired network access, a Junos specialist investigates this scenario: An employee connects a corporate laptop but the switch keeps the port unauthorized even though the IP network is functional. Unknown endpoints must not gain access to protected internal VLANs. What protocol behavior accounts for this failure?

  1. A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it.
  2. Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response.
  3. MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy.
  4. 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access.

Explanation

Correct Answer

D:

For a corporate campus enforcing wired network access, the governing mechanism is: 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. It explains the reported symptom: An employee connects a corporate laptop but the switch keeps the port unauthorized even though the IP network is functional. The intended response is: Configure supported dot1x authenticator and RADIUS settings and verify valid supplicant credentials. Verification: An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state.

Incorrect Answers

A:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. This alternative mechanism does not match the current fault.

B:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. Fixing that different mechanism would not address the current root cause: 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access.

C:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. Its verification is distinct from the reported condition: An employee connects a corporate laptop but the switch keeps the port unauthorized even though the IP network is functional. Unknown endpoints must not gain access to protected internal VLANs.

Question 405

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A BGP import policy changes but the operator wants to re-evaluate learned routes without tearing down a healthy peering. The change must not introduce an unwanted autonomous-system route leak. Which observation proves this requirement has been satisfied?

  1. Accepted routes reflect the updated policy while the TCP/BGP session remains Established.
  2. Reflector clients receive BGP routes from other clients through the reflector.
  3. The peer exchanges a test IPv4 prefix and the route enters inet.0 when eligible.
  4. show bgp neighbor reports the expected local source and established peer endpoint.

Explanation

Correct Answer

A:

For a large organization using Junos route reflectors, the decisive evidence is: Accepted routes reflect the updated policy while the TCP/BGP session remains Established. This validates the action: Request a supported inbound route refresh for the affected peer after validating the new policy. Because: BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. The appropriate correction for the reported case is: Request a supported inbound route refresh for the affected peer after validating the new policy.

C:

BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. Fixing that different mechanism would not address the current root cause: BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it.

D:

Both ends of a loopback-based BGP session must reach and recognize the configured local addresses. Its verification is distinct from the reported condition: A BGP import policy changes but the operator wants to re-evaluate learned routes without tearing down a healthy peering. The change must not introduce an unwanted autonomous-system route leak.

Question 406

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The correction must not expose administrative network prefixes. What requirement most specifically calls for this approach?

  1. Use NSSA when a limited external-route origin must exist inside an OSPF area.
  2. Use link-local addressing to interpret OSPFv3 IPv6 neighbor and next-hop behavior.
  3. Use OSPF authentication to control trusted routing neighbors on supported links.
  4. Use OSPFv3 for link-state routing of eligible IPv6 enterprise prefixes.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, this mechanism fits the requirement: Use link-local addressing to interpret OSPFv3 IPv6 neighbor and next-hop behavior. The design is appropriate because: OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. In this scenario, the observed issue is: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The corresponding implementation is: Validate the IPv6 link-local adjacency and correct outgoing logical interface for the route.

Incorrect Answers

A:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. The appropriate correction for the reported case is: Validate the IPv6 link-local adjacency and correct outgoing logical interface for the route.

C:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. Fixing that different mechanism would not address the current root cause: OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.

D:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Its verification is distinct from the reported condition: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The correction must not expose administrative network prefixes.

Question 407

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: Branch OSPF peers need one controlled default exit but the upstream router floods many unnecessary external routes. The correction must not expose administrative network prefixes. Which design objective is best served by this mechanism?

  1. Use OSPF export policy to originate selected external routes from an ASBR.
  2. Use SPF diagnostics to identify repeated topology-triggered route recalculation.
  3. Use a selective OSPF external default route for simple branch egress.
  4. Use interarea-prefix LSAs to propagate IPv6 reachability between OSPFv3 areas.

Explanation

Correct Answer

C:

For a healthcare organization connecting redundant facilities, this mechanism fits the requirement: Use a selective OSPF external default route for simple branch egress. The design is appropriate because: A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. In this scenario, the observed issue is: Branch OSPF peers need one controlled default exit but the upstream router floods many unnecessary external routes. The corresponding implementation is: Export only the authorized default route and confirm its next-hop and forwarding path.

Incorrect Answers

A:

Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. The appropriate correction for the reported case is: Export only the authorized default route and confirm its next-hop and forwarding path.

B:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. Fixing that different mechanism would not address the current root cause: a scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid.

D:

OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries. Its verification is distinct from the reported condition: Branch OSPF peers need one controlled default exit but the upstream router floods many unnecessary external routes. The correction must not expose administrative network prefixes.

Question 408

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The corrected tree must respect source and group authorization. What is the most likely design-related cause?

  1. PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges.
  2. Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point.
  3. Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance.
  4. PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain.

Explanation

Correct Answer

D:

For a multimedia training network running Junos multicast routers, the governing mechanism is: PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. It explains the reported symptom: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The intended response is: Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope. Verification: Routers learn the expected RP mapping and group traffic builds a valid shared tree.

Incorrect Answers

A:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. This alternative mechanism does not match the current fault.

B:

Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. Fixing that different mechanism would not address the current root cause: PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain.

C:

Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. Its verification is distinct from the reported condition: A large multicast domain requires dynamic discovery of candidate RPs instead of maintaining every mapping manually. The corrected tree must respect source and group authorization.

Question 409

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: Traffic continues on a downstream path after the final interested receiver leaves the group. The group traffic must reach interested receivers without flooding other locations. What protocol behavior accounts for this failure?

  1. PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes.
  2. PIM designated-router election selects the local router responsible for certain first-hop PIM functions.
  3. Multicast group and routing policies can limit which group ranges and sources cross specified boundaries.
  4. Multicast Source Discovery Protocol communicates source-active information between supported RPs.

Explanation

Correct Answer

A:

For a campus distributing IP video to several buildings, the governing mechanism is: PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes. It explains the reported symptom: Traffic continues on a downstream path after the final interested receiver leaves the group. The intended response is: Inspect and correct downstream receiver removal and upstream PIM prune processing. Verification: The unneeded branch ages out or prunes while other receiver branches remain active.

Incorrect Answers

B:

PIM designated-router election selects the local router responsible for certain first-hop PIM functions. This alternative mechanism does not match the current fault.

C:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Fixing that different mechanism would not address the current root cause: PIM Join and Prune signaling maintains or removes forwarding-tree state as downstream interest changes.

D:

Multicast Source Discovery Protocol communicates source-active information between supported RPs. Its verification is distinct from the reported condition: Traffic continues on a downstream path after the final interested receiver leaves the group. The group traffic must reach interested receivers without flooding other locations.

Question 410

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: Two enterprise border routers learn equivalent external destinations but all internal traffic exits the wrong border. The change must not introduce an unwanted autonomous-system route leak. Which response best restores the intended behavior?

  1. Correct the unintended AS-path manipulation or routing leak rather than disabling loop protection.
  2. Set an intentional higher local preference on routes learned at the chosen ingress boundary.
  3. Deploy supported route-reflector clusters and designate approved clients with appropriate topology.
  4. Review peer type and the complete path decision chain before adjusting selection policy.

Explanation

Correct Answer

B:

For a large organization using Junos route reflectors, the direct corrective action is: Set an intentional higher local preference on routes learned at the chosen ingress boundary. This addresses the mechanism: BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones. Confirm by checking: An iBGP speaker selects the approved border after receiving otherwise comparable paths. During rollout, do not confuse BGP local preference with Junos protocol-level route preference.

Incorrect Answers

A:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. The appropriate correction for the reported case is: Set an intentional higher local preference on routes learned at the chosen ingress boundary.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones.

D:

Junos BGP best-path logic generally prefers the external route when preceding comparisons tie. Its verification is distinct from the reported condition: Two enterprise border routers learn equivalent external destinations but all internal traffic exits the wrong border. The change must not introduce an unwanted autonomous-system route leak.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests