mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 36

Question 350

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which technical mechanism most directly explains the symptom?

  1. Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully.
  2. Neighbor compatibility depends on matching Hello and dead intervals for the participating link.
  3. OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments.
  4. OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.

Explanation

Correct Answer

B:

For a regional provider operating Junos-based branch routers, the governing mechanism is: Neighbor compatibility depends on matching Hello and dead intervals for the participating link. It explains the reported symptom: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The intended response is: Align supported OSPF Hello and dead intervals on both neighboring interfaces. Verification: show ospf neighbor reaches Full and periodic Hellos remain within the agreed dead interval.

Incorrect Answers

A:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. This alternative mechanism does not match the current fault.

C:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Fixing that different mechanism would not address the current root cause: neighbor compatibility depends on matching Hello and dead intervals for the participating link.

D:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Its verification is distinct from the reported condition: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 351

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: A dual-homed Ethernet segment loses reachability after one attached PE fails because remote devices lack proper multihoming state. The overlay must relearn host reachability without stale tunnel selection. What is the most appropriate correction to implement?

  1. Enable a supported EVPN BGP signaling relationship with the intended route targets and instances.
  2. Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes.
  3. Validate the Ethernet A-D advertisements and intended multihoming failover configuration.
  4. Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability.

Explanation

Correct Answer

C:

For an enterprise migrating virtual machines between racks, the direct corrective action is: Validate the Ethernet A-D advertisements and intended multihoming failover configuration. This addresses the mechanism: EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Confirm by checking: Remote PEs update reachability promptly when the attached PE withdraws its Ethernet segment route. During rollout, check all-active versus single-active semantics before changing failover advertisements.

Incorrect Answers

A:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. The appropriate correction for the reported case is: Validate the Ethernet A-D advertisements and intended multihoming failover configuration.

B:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Fixing that different mechanism would not address the current root cause: EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior.

D:

VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. Its verification is distinct from the reported condition: A dual-homed Ethernet segment loses reachability after one attached PE fails because remote devices lack proper multihoming state. The overlay must relearn host reachability without stale tunnel selection.

Question 352

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An OSPF route and a BGP route for the same prefix are both learned but only one enters active forwarding. The correction must not expose administrative network prefixes. Which observation proves this requirement has been satisfied?

  1. show ospf database and downstream routes reflect only the approved summaries.
  2. The selected destination shows multiple eligible next hops and traffic load sharing is observable.
  3. The neighbor leaves ExStart and reaches Full with synchronized link-state databases.
  4. show route detail indicates the active entry and its protocol preference for the prefix.

Explanation

Correct Answer

D:

For a healthcare organization connecting redundant facilities, the decisive evidence is: show route detail indicates the active entry and its protocol preference for the prefix. This validates the action: Compare route preference and next-hop resolution before modifying any active path policy. Because: Junos first chooses active routing-table entries using protocol route preference before forwarding installation. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. The appropriate correction for the reported case is: Compare route preference and next-hop resolution before modifying any active path policy.

B:

OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior. Fixing that different mechanism would not address the current root cause: junos first chooses active routing-table entries using protocol route preference before forwarding installation.

C:

Database-description exchange can fail when peers disagree on the IP MTU for a common OSPF link. Its verification is distinct from the reported condition: An OSPF route and a BGP route for the same prefix are both learned but only one enters active forwarding. The correction must not expose administrative network prefixes.

Question 353

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: A remote VTEP cannot locate a host MAC in another VXLAN segment even though the BGP EVPN session is established. The tenant traffic must remain isolated across the overlay. Which design objective is best served by this mechanism?

  1. Use EVPN type-2 routes to announce host MAC and optional IP reachability.
  2. Use BGP EVPN as a control plane for distributed Ethernet overlay information.
  3. Use EVPN type-3 routes for overlay BUM membership and replication discovery.
  4. Use EVPN type-5 routes for routed IP-prefix reachability between EVPN sites.

Explanation

Correct Answer

A:

For a Junos EVPN-VXLAN leaf-spine fabric, this mechanism fits the requirement: Use EVPN type-2 routes to announce host MAC and optional IP reachability. The design is appropriate because: EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. In this scenario, the observed issue is: A remote VTEP cannot locate a host MAC in another VXLAN segment even though the BGP EVPN session is established. The corresponding implementation is: Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance.

Incorrect Answers

B:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. The appropriate correction for the reported case is: Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance.

C:

EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership. Fixing that different mechanism would not address the current root cause: EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.

D:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Its verification is distinct from the reported condition: A remote VTEP cannot locate a host MAC in another VXLAN segment even though the BGP EVPN session is established. The tenant traffic must remain isolated across the overlay.

Question 354

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The design must avoid forwarding loops during failover. When would the described mechanism be appropriate?

  1. Use EVPN split horizon to prevent bridging loops across dual-homed Ethernet segments.
  2. Use BGP EVPN as a control plane for distributed Ethernet overlay information.
  3. Use EVPN MAC mobility signaling when a host changes its overlay attachment location.
  4. Use EVPN DF election to control redundant BUM forwarding on multihomed segments.

Explanation

Correct Answer

B:

For a multihomed data center using redundant Ethernet segments, this mechanism fits the requirement: Use BGP EVPN as a control plane for distributed Ethernet overlay information. The design is appropriate because: EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. In this scenario, the observed issue is: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The corresponding implementation is: Enable a supported EVPN BGP signaling relationship with the intended route targets and instances.

Incorrect Answers

A:

EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment. The appropriate correction for the reported case is: Enable a supported EVPN BGP signaling relationship with the intended route targets and instances.

C:

EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. Fixing that different mechanism would not address the current root cause: EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information.

D:

EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments. Its verification is distinct from the reported condition: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The design must avoid forwarding loops during failover. When would the described mechanism be appropriate.

Question 355

At a school building a restricted guest onboarding network, a Junos specialist investigates this scenario: A switch port configured for 802.1X, MAC RADIUS and captive portal grants unexpected access because the fallback sequence is misunderstood. Only approved identities may enter privileged enterprise segments. Which design objective is best served by this mechanism?

  1. Use MAC RADIUS as a controlled fallback for devices lacking 802.1X support.
  2. Use 802.1X port-based authentication for credential-aware enterprise clients.
  3. Use ordered multi-method access authentication for mixed enterprise endpoints.
  4. Use a guest VLAN for limited access by suitable non-802.1X devices.

Explanation

Correct Answer

C:

For a school building a restricted guest onboarding network, this mechanism fits the requirement: Use ordered multi-method access authentication for mixed enterprise endpoints. The design is appropriate because: Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. In this scenario, the observed issue is: A switch port configured for 802.1X, MAC RADIUS and captive portal grants unexpected access because the fallback sequence is misunderstood. The corresponding implementation is: Inspect and configure the supported 802.1X then MAC RADIUS then portal method order for that port.

Incorrect Answers

A:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. The appropriate correction for the reported case is: Inspect and configure the supported 802.1X then MAC RADIUS then portal method order for that port.

B:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Fixing that different mechanism would not address the current root cause: multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response.

D:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Its verification is distinct from the reported condition: A switch port configured for 802.1X, MAC RADIUS and captive portal grants unexpected access because the fallback sequence is misunderstood. Only approved identities may enter privileged enterprise segments.

Question 356

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: A conferencing application expects an unknown multicast source but engineers require each client to specify a sender IP. The group traffic must reach interested receivers without flooding other locations. Which observation proves this requirement has been satisfied?

  1. show pim join reports an expected entry and packets follow the joined multicast branch.
  2. Only joined receiver ports receive the test multicast frames during stable operation.
  3. show pim rps reports the planned RP and receivers join the corresponding tree.
  4. A receiver can join G and obtain traffic from an approved discovered sender.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, the decisive evidence is: A receiver can join G and obtain traffic from an approved discovered sender. This validates the action: Design a suitable ASM group with functioning IGMP membership and rendezvous-point information. Because: Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. The appropriate correction for the reported case is: Design a suitable ASM group with functioning IGMP membership and rendezvous-point information.

B:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Fixing that different mechanism would not address the current root cause: any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism.

C:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Its verification is distinct from the reported condition: A conferencing application expects an unknown multicast source but engineers require each client to specify a sender IP. The group traffic must reach interested receivers without flooding other locations.

Question 357

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: The operations team sees (S,G) entries and assumes they mean every source may send to a joined group. The team should test joins and forwarding separately. What verification result should the engineer expect?

  1. show multicast route or PIM state contains the planned source-group combination.
  2. Subscribers join the selected multicast group and receive matching test packets.
  3. The RP learns the source and joined downstream receivers begin receiving the stream.
  4. show pim rps reports the planned RP and receivers join the corresponding tree.

Explanation

Correct Answer

A:

For an enterprise telemetry network with multicast subscribers, the decisive evidence is: show multicast route or PIM state contains the planned source-group combination. This validates the action: Inspect the source and group state to diagnose the correct sender-specific distribution tree. Because: (S,G) multicast state identifies one particular source S and destination group G. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. The appropriate correction for the reported case is: Inspect the source and group state to diagnose the correct sender-specific distribution tree.

C:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. Fixing that different mechanism would not address the current root cause: (S,G) multicast state identifies one particular source S and destination group G.

D:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Its verification is distinct from the reported condition: The operations team sees (S,G) entries and assumes they mean every source may send to a joined group. The team should test joins and forwarding separately.

Question 358

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: An enterprise iBGP network cannot scale because every routing speaker requires a direct adjacency with every other speaker. The change must not introduce an unwanted autonomous-system route leak. What verification result should the engineer expect?

  1. Reflected routes contain expected cluster-list information and survive individual reflector failure.
  2. Reflector clients receive BGP routes from other clients through the reflector.
  3. The peer exchanges a test IPv4 prefix and the route enters inet.0 when eligible.
  4. The revised advertisement no longer contains an invalid local-AS loop and becomes eligible.

Explanation

Correct Answer

B:

For a large organization using Junos route reflectors, the decisive evidence is: Reflector clients receive BGP routes from other clients through the reflector. This validates the action: Deploy supported route-reflector clusters and designate approved clients with appropriate topology. Because: Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. The appropriate correction for the reported case is: Deploy supported route-reflector clusters and designate approved clients with appropriate topology.

C:

BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. Fixing that different mechanism would not address the current root cause: ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection.

D:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. Its verification is distinct from the reported condition: An enterprise iBGP network cannot scale because every routing speaker requires a direct adjacency with every other speaker. The change must not introduce an unwanted autonomous-system route leak.

Question 359

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A BGP update is received but appears hidden because the announced next-hop address cannot be resolved in the routing table. The change must not introduce an unwanted autonomous-system route leak. For which use case is this feature the best match?

  1. Use stable loopback addresses for resilient internal BGP sessions.
  2. Use BGP prefix limits to protect route-table capacity from excessive peer announcements.
  3. Use next-hop resolution to determine BGP route eligibility for active forwarding.
  4. Use next-hop self when internal clients cannot route to external BGP next-hop addresses.

Explanation

Correct Answer

C:

For a large organization using Junos route reflectors, this mechanism fits the requirement: Use next-hop resolution to determine BGP route eligibility for active forwarding. The design is appropriate because: A usable BGP route requires an eligible reachable forwarding next hop before it can become active. In this scenario, the observed issue is: A BGP update is received but appears hidden because the announced next-hop address cannot be resolved in the routing table. The corresponding implementation is: Repair the underlay route to the received BGP next hop or apply a deliberate next-hop policy.

Incorrect Answers

A:

Both ends of a loopback-based BGP session must reach and recognize the configured local addresses. The appropriate correction for the reported case is: Repair the underlay route to the received BGP next hop or apply a deliberate next-hop policy.

B:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. Fixing that different mechanism would not address the current root cause: a usable BGP route requires an eligible reachable forwarding next hop before it can become active.

D:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Its verification is distinct from the reported condition: A BGP update is received but appears hidden because the announced next-hop address cannot be resolved in the routing table. The change must not introduce an unwanted autonomous-system route leak.

Question 360

At a branch router serving several application classes, a Junos specialist investigates this scenario: Users report poor application performance but staff rely solely on interface utilization and ignore per-queue drops. The team must validate packet drops by actual queue statistics. Which precaution should be checked before committing the change?

  1. Do not treat packet-loss priority as a substitute for guaranteed bandwidth or physical capacity.
  2. Control priority traffic volume to avoid starving all other egress queues.
  3. Check both classification and rewrite stages because they solve different problems.
  4. Do not infer an absence of congestion from a low five-minute average utilization value alone.

Explanation

Correct Answer

D:

For a branch router serving several application classes, the relevant safeguard is: Do not infer an absence of congestion from a low five-minute average utilization value alone. It matters while implementing: Inspect Junos interface queue statistics and correlate drops with traffic class and times. The fault involves: Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. The required acceptance result remains: A representative load shows which class drops packets and the verified correction reduces them.

Incorrect Answers

A:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. The appropriate correction for the reported case is: Do not infer an absence of congestion from a low five-minute average utilization value alone.

B:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. Fixing that different mechanism would not address the current root cause: per-queue counters reveal forwarding class use, transmission and discard behavior during congestion.

C:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Its verification is distinct from the reported condition: Users report poor application performance but staff rely solely on interface utilization and ignore per-queue drops. The team must validate packet drops by actual queue statistics.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests