mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 35

Question 340

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The tenant traffic must remain isolated across the overlay. What would demonstrate a successful correction under test?

  1. A remote EVPN MAC table resolves the host to the expected originating VTEP.
  2. Remote leaves update the affected MAC destination to the new VTEP after the controlled move.
  3. Only matching tenant MAC and prefix advertisements enter each isolated EVPN instance.
  4. The remote IP-VRF learns the approved prefix with valid overlay next-hop resolution.

Explanation

Correct Answer

D:

For a Junos EVPN-VXLAN leaf-spine fabric, the decisive evidence is: The remote IP-VRF learns the approved prefix with valid overlay next-hop resolution. This validates the action: Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets. Because: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. The appropriate correction for the reported case is: Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets.

B:

EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. Fixing that different mechanism would not address the current root cause: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs.

C:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. Its verification is distinct from the reported condition: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The tenant traffic must remain isolated across the overlay.

Question 341

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: A policer causes unexpected drops on short application bursts even though the long-term average rate is modest. The network must keep critical application latency within policy. What would demonstrate a successful correction under test?

  1. The compliant test burst passes while sustained traffic beyond the policy is limited.
  2. Voice queue delay remains within the target while lower classes still receive required service.
  3. Congestion tests show the intended early-drop curve without unbounded queue growth.
  4. Queue counters show the intended class receives its planned share during a controlled load.

Explanation

Correct Answer

A:

For a congested enterprise WAN carrying video, voice and backups, the decisive evidence is: The compliant test burst passes while sustained traffic beyond the policy is limited. This validates the action: Tune supported policer bandwidth and burst size to the measured permitted traffic profile. Because: Rate policers use token or burst parameters that influence which short bursts are considered conformant. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. The appropriate correction for the reported case is: Tune supported policer bandwidth and burst size to the measured permitted traffic profile.

C:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. Fixing that different mechanism would not address the current root cause: rate policers use token or burst parameters that influence which short bursts are considered conformant.

D:

Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. Its verification is distinct from the reported condition: A policer causes unexpected drops on short application bursts even though the long-term average rate is modest. The network must keep critical application latency within policy.

Question 342

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: A route is absent from the active table even though BGP packet counters show received updates. The change must not introduce an unwanted autonomous-system route leak. For which use case is this feature the best match?

  1. Use next-hop resolution to determine BGP route eligibility for active forwarding.
  2. Use hidden-route and peer diagnostics to explain missing BGP advertisements.
  3. Use BGP route reflectors to scale internal route distribution beyond a full mesh.
  4. Use next-hop self when internal clients cannot route to external BGP next-hop addresses.

Explanation

Correct Answer

B:

For a large organization using Junos route reflectors, this mechanism fits the requirement: Use hidden-route and peer diagnostics to explain missing BGP advertisements. The design is appropriate because: Hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection. In this scenario, the observed issue is: A route is absent from the active table even though BGP packet counters show received updates. The corresponding implementation is: Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix.

Incorrect Answers

A:

A usable BGP route requires an eligible reachable forwarding next hop before it can become active. The appropriate correction for the reported case is: Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection.

D:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Its verification is distinct from the reported condition: A route is absent from the active table even though BGP packet counters show received updates. The change must not introduce an unwanted autonomous-system route leak.

Question 343

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: Multicast packets never cross an inter-router link and no PIM adjacency appears although IP unicast works. The change must preserve source identity and avoid multicast loops. Which configuration adjustment should be made first to address this issue?

  1. Design a suitable ASM group with functioning IGMP membership and rendezvous-point information.
  2. Configure or correct the intended RP mapping for the affected group range throughout the domain.
  3. Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic.
  4. Enable supported IGMPv3 processing and make hosts join the approved source-group pair.

Explanation

Correct Answer

C:

For a live-event venue using routed multicast streaming, the direct corrective action is: Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic. This addresses the mechanism: PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. Confirm by checking: show pim neighbors lists the expected adjacent router on the planned interface. During rollout, avoid enabling PIM on unrelated edge ports or firewall zones by default.

Incorrect Answers

A:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. The appropriate correction for the reported case is: Enable compatible PIM on the appropriate routed interfaces and allow required multicast control traffic.

B:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Fixing that different mechanism would not address the current root cause: PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges.

D:

IGMPv3 membership records can identify source filters that enable explicit SSM interest. Its verification is distinct from the reported condition: Multicast packets never cross an inter-router link and no PIM adjacency appears although IP unicast works. The change must preserve source identity and avoid multicast loops.

Question 344

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: Two routers connected by one Ethernet segment have mismatched OSPF area assignments and never become neighbors. The routing change must preserve control-plane consistency across areas. What requirement most specifically calls for this approach?

  1. Use interarea-prefix LSAs to propagate IPv6 reachability between OSPFv3 areas.
  2. Use area 0 as the backbone of a multi-area OSPF routing domain.
  3. Use explicit per-interface OSPF area membership to form an approved internal adjacency.
  4. Use identical area configuration on directly adjacent OSPF participants.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, this mechanism fits the requirement: Use identical area configuration on directly adjacent OSPF participants. The design is appropriate because: OSPF neighbors on a common link must agree on the area identifier used in Hello processing. In this scenario, the observed issue is: Two routers connected by one Ethernet segment have mismatched OSPF area assignments and never become neighbors. The corresponding implementation is: Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design.

Incorrect Answers

A:

OSPFv3 interarea-prefix LSAs convey reachable IPv6 prefixes across area boundaries. The appropriate correction for the reported case is: Assign the connecting interfaces to the same intended OSPF area and validate the area boundary design.

B:

OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. Fixing that different mechanism would not address the current root cause: OSPF neighbors on a common link must agree on the area identifier used in Hello processing.

C:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Its verification is distinct from the reported condition: Two routers connected by one Ethernet segment have mismatched OSPF area assignments and never become neighbors. The routing change must preserve control-plane consistency across areas.

Question 345

At a large organization using Junos route reflectors, a Junos specialist investigates this scenario: Two BGP speakers establish a session but exchange IPv4 prefixes only and IPv6 routes remain absent. The change must not introduce an unwanted autonomous-system route leak. Which precaution should be checked before committing the change?

  1. Avoid assuming an Established IPv4 BGP session proves IPv6 NLRI capability.
  2. Check family mismatches before changing general session hold timers.
  3. Do not confuse BGP local preference with Junos protocol-level route preference.
  4. Preserve reflector redundancy and cluster design to avoid hidden routing loops.

Explanation

Correct Answer

A:

For a large organization using Junos route reflectors, the relevant safeguard is: Avoid assuming an Established IPv4 BGP session proves IPv6 NLRI capability. It matters while implementing: Enable the authorized inet6-unicast family consistently at relevant BGP group or peer scope. The fault involves: BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. The required acceptance result remains: An IPv6 test prefix appears in received BGP routes with a reachable IPv6 next hop.

Incorrect Answers

B:

BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. The appropriate correction for the reported case is: Avoid assuming an Established IPv4 BGP session proves IPv6 NLRI capability.

C:

BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones. Fixing that different mechanism would not address the current root cause: BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged.

D:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Its verification is distinct from the reported condition: Two BGP speakers establish a session but exchange IPv4 prefixes only and IPv6 routes remain absent. The change must not introduce an unwanted autonomous-system route leak.

Question 346

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: Separate PIM-SM rendezvous points cannot discover active multicast sources registered at neighboring RPs. The corrected tree must respect source and group authorization. What is the most appropriate correction to implement?

  1. Inspect the source and group state to diagnose the correct sender-specific distribution tree.
  2. Configure the required MSDP relationships between the intended ASM rendezvous points.
  3. Provide an approved IGMP querier or routed multicast interface for the VLAN.
  4. Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope.

Explanation

Correct Answer

B:

For a multimedia training network running Junos multicast routers, the direct corrective action is: Configure the required MSDP relationships between the intended ASM rendezvous points. This addresses the mechanism: Multicast Source Discovery Protocol communicates source-active information between supported RPs. Confirm by checking: show msdp source-active shows a known source and receivers on the other RP reach it. During rollout, do not assume MSDP is mandatory for every SSM or every PIM-only Anycast RP design.

Incorrect Answers

A:

(S,G) multicast state identifies one particular source S and destination group G. The appropriate correction for the reported case is: Configure the required MSDP relationships between the intended ASM rendezvous points.

C:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Fixing that different mechanism would not address the current root cause: Multicast Source Discovery Protocol communicates source-active information between supported RPs.

D:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. Its verification is distinct from the reported condition: Separate PIM-SM rendezvous points cannot discover active multicast sources registered at neighboring RPs. The corrected tree must respect source and group authorization.

Question 347

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The team must validate neighbor state rather than assume basic IP reachability proves routing. What verification result should the engineer expect?

  1. show ospf database and downstream routes reflect only the approved summaries.
  2. An IPv6 destination installs with an expected link-local next hop and forwards successfully.
  3. The subnet is reachable from OSPF peers while no neighbor forms on the passive port.
  4. The peer appears in show ospf neighbor and the local interface appears in show ospf interface.

Explanation

Correct Answer

C:

For a regional provider operating Junos-based branch routers, the decisive evidence is: The subnet is reachable from OSPF peers while no neighbor forms on the passive port. This validates the action: Configure supported OSPF passive behavior on the host-facing interface. Because: A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. The appropriate correction for the reported case is: Configure supported OSPF passive behavior on the host-facing interface.

B:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Fixing that different mechanism would not address the current root cause: a passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos.

D:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Its verification is distinct from the reported condition: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 348

At a medical facility deploying high-power conference phones, a Junos specialist investigates this scenario: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The phone network must retain appropriate VLAN and voice QoS treatment. When would the described mechanism be appropriate?

  1. Use PoE capacity planning when many phones draw power from one access switch.
  2. Use dedicated voice VLANs to separate phone and workstation traffic on a shared port.
  3. Use LLDP to discover directly connected Ethernet neighbors.
  4. Use voice-specific QoS classification on mixed phone and PC ports.

Explanation

Correct Answer

D:

For a medical facility deploying high-power conference phones, this mechanism fits the requirement: Use voice-specific QoS classification on mixed phone and PC ports. The design is appropriate because: Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. In this scenario, the observed issue is: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The corresponding implementation is: Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic.

Incorrect Answers

A:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. The appropriate correction for the reported case is: Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic.

B:

A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. Fixing that different mechanism would not address the current root cause: voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment.

C:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. Its verification is distinct from the reported condition: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The phone network must retain appropriate VLAN and voice QoS treatment. When would the described mechanism be appropriate.

Question 349

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The chosen route must have a valid data-plane next hop. Which response best restores the intended behavior?

  1. Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified.
  2. Repair the underlay route to the received BGP next hop or apply a deliberate next-hop policy.
  3. Apply approved next-hop self behavior at the correct iBGP advertisement boundary.
  4. Apply targeted AS-path prepend in an authorized export policy for the backup link.

Explanation

Correct Answer

A:

For an enterprise core exchanging BGP routes over redundant WAN paths, the direct corrective action is: Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified. This addresses the mechanism: In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Confirm by checking: show route protocol BGP reveals the selected path and its AS-path sequence. During rollout, check local preference and next-hop reachability first because they can override this comparison.

Incorrect Answers

B:

A usable BGP route requires an eligible reachable forwarding next hop before it can become active. The appropriate correction for the reported case is: Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified.

C:

IBGP propagation may retain the original eBGP next-hop attribute unless policy or configuration changes it. Fixing that different mechanism would not address the current root cause: In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.

D:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. Its verification is distinct from the reported condition: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The chosen route must have a valid data-plane next hop.

Question 350

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which technical mechanism most directly explains the symptom?

  1. Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully.
  2. Neighbor compatibility depends on matching Hello and dead intervals for the participating link.
  3. OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments.
  4. OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.

Explanation

Correct Answer

B:

For a regional provider operating Junos-based branch routers, the governing mechanism is: Neighbor compatibility depends on matching Hello and dead intervals for the participating link. It explains the reported symptom: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The intended response is: Align supported OSPF Hello and dead intervals on both neighboring interfaces. Verification: show ospf neighbor reaches Full and periodic Hellos remain within the agreed dead interval.

Incorrect Answers

A:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. This alternative mechanism does not match the current fault.

C:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Fixing that different mechanism would not address the current root cause: neighbor compatibility depends on matching Hello and dead intervals for the participating link.

D:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Its verification is distinct from the reported condition: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests