mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 34

Question 330

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: Two available OSPF WAN paths use the less desirable circuit even though both adjacencies are healthy. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which observation proves this requirement has been satisfied?

  1. The missing prefix is visible in an appropriate LSA and the downstream route becomes active.
  2. The intended path has lower total cost and appears as the active route for a test prefix.
  3. The peer appears in show ospf neighbor and the local interface appears in show ospf interface.
  4. show ospf3 neighbor indicates a healthy IPv6 adjacency and IPv6 routes are learned.

Explanation

Correct Answer

B:

For a regional provider operating Junos-based branch routers, the decisive evidence is: The intended path has lower total cost and appears as the active route for a test prefix. This validates the action: Set appropriate interface metrics that reflect the desired route costs across the topology. Because: OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. The appropriate correction for the reported case is: Set appropriate interface metrics that reflect the desired route costs across the topology.

C:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Fixing that different mechanism would not address the current root cause: OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits.

D:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Its verification is distinct from the reported condition: Two available OSPF WAN paths use the less desirable circuit even though both adjacencies are healthy. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 331

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A desktop plugged into an EX switch receives traffic from an unexpected user VLAN. The proposed behavior must be validated on actual switching ports. Which underlying distinction should guide troubleshooting?

  1. Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN.
  2. BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages.
  3. An untagged Ethernet access port places endpoint traffic into its configured access VLAN.
  4. Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables.

Explanation

Correct Answer

C:

For a data-center access fabric using tagged trunks, the governing mechanism is: An untagged Ethernet access port places endpoint traffic into its configured access VLAN. It explains the reported symptom: A desktop plugged into an EX switch receives traffic from an unexpected user VLAN. The intended response is: Set the intended VLAN membership on the access logical interface and verify the port mode. Verification: show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet.

Incorrect Answers

A:

Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. This alternative mechanism does not match the current fault.

B:

BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. Fixing that different mechanism would not address the current root cause: an untagged Ethernet access port places endpoint traffic into its configured access VLAN.

D:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. Its verification is distinct from the reported condition: A desktop plugged into an EX switch receives traffic from an unexpected user VLAN. The proposed behavior must be validated on actual switching ports.

Question 332

At a corporate campus enforcing wired network access, a Junos specialist investigates this scenario: A guest must accept access conditions in a browser before reaching a limited public LAN. Unknown endpoints must not gain access to protected internal VLANs. What is the most appropriate correction to implement?

  1. Configure supported dot1x authenticator and RADIUS settings and verify valid supplicant credentials.
  2. Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity.
  3. Configure supported guest VLAN behavior and its restricted connectivity policy on the access port.
  4. Configure supported captive-portal access and browser redirection with suitable authentication infrastructure.

Explanation

Correct Answer

D:

For a corporate campus enforcing wired network access, the direct corrective action is: Configure supported captive-portal access and browser redirection with suitable authentication infrastructure. This addresses the mechanism: Captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow. Confirm by checking: The guest sees the authorized portal and only obtains permitted access after the expected process. During rollout, avoid mixing MAC RADIUS and captive portal unsupported modes without required 802.1X handling.

Incorrect Answers

A:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. The appropriate correction for the reported case is: Configure supported captive-portal access and browser redirection with suitable authentication infrastructure.

B:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. Fixing that different mechanism would not address the current root cause: captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow.

C:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Its verification is distinct from the reported condition: A guest must accept access conditions in a browser before reaching a limited public LAN. Unknown endpoints must not gain access to protected internal VLANs.

Question 333

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. Classification and downstream remarking must not be confused. Which underlying distinction should guide troubleshooting?

  1. A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class.
  2. A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior.
  3. Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints.
  4. A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.

Explanation

Correct Answer

A:

For a financial services network enforcing trusted DSCP markings, the governing mechanism is: A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. It explains the reported symptom: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. The intended response is: Create a narrowly matched classifier filter and apply it at the correct ingress logical interface. Verification: A representative phone flow enters the chosen forwarding class while ordinary traffic remains best effort.

Incorrect Answers

B:

A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. This alternative mechanism does not match the current fault.

C:

Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. Fixing that different mechanism would not address the current root cause: a multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class.

D:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Its verification is distinct from the reported condition: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. Classification and downstream remarking must not be confused.

Question 334

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: An employee connects a corporate laptop but the switch keeps the port unauthorized even though the IP network is functional. The switch must distinguish identity failures from absent authentication responses. Which configuration adjustment should be made first to address this issue?

  1. Enable MAC RADIUS as an approved method for the printer port and register the permitted device identity.
  2. Configure supported dot1x authenticator and RADIUS settings and verify valid supplicant credentials.
  3. Inspect and configure the supported 802.1X then MAC RADIUS then portal method order for that port.
  4. Configure supported guest VLAN behavior and its restricted connectivity policy on the access port.

Explanation

Correct Answer

B:

For a managed office network with printers and laptops, the direct corrective action is: Configure supported dot1x authenticator and RADIUS settings and verify valid supplicant credentials. This addresses the mechanism: 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Confirm by checking: An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state. During rollout, preserve break-glass and management paths when enabling access control on an active switch.

Incorrect Answers

A:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. The appropriate correction for the reported case is: Configure supported dot1x authenticator and RADIUS settings and verify valid supplicant credentials.

C:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. Fixing that different mechanism would not address the current root cause: 802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access.

D:

A guest VLAN can supply restricted access for supported nonresponsive clients when the authentication mode allows it. Its verification is distinct from the reported condition: An employee connects a corporate laptop but the switch keeps the port unauthorized even though the IP network is functional. The switch must distinguish identity failures from absent authentication responses.

Question 335

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: A BGP neighbor is configured correctly but remains in Connect or Active state across a protected interconnect. The diagnosis must distinguish a healthy BGP session from eligible received routes. What would demonstrate a successful correction under test?

  1. The peer receives only the approved announcements and no internal management subnets.
  2. The best route matches documented origin comparison when other earlier criteria are tied.
  3. The neighbor establishes its TCP session and BGP state changes to Established.
  4. Reflector clients receive BGP routes from other clients through the reflector.

Explanation

Correct Answer

C:

For a managed network team troubleshooting an internet edge, the decisive evidence is: The neighbor establishes its TCP session and BGP state changes to Established. This validates the action: Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect. Because: BGP depends on a reachable TCP transport path, normally using destination port 179. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. The appropriate correction for the reported case is: Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect.

B:

BGP best-path selection considers origin type after higher-priority attributes, normally preferring IGP over EGP over incomplete. Fixing that different mechanism would not address the current root cause: BGP depends on a reachable TCP transport path, normally using destination port 179.

D:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Its verification is distinct from the reported condition: A BGP neighbor is configured correctly but remains in Connect or Active state across a protected interconnect. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 336

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A neighbor mistakenly announces hundreds of thousands of unexpected routes and threatens routing memory. The chosen route must have a valid data-plane next hop. What verification result should the engineer expect?

  1. An iBGP speaker selects the approved border after receiving otherwise comparable paths.
  2. Only intended prefix lengths pass the import or export policy.
  3. show route protocol bgp reveals the selected path and its AS-path sequence.
  4. A bounded test demonstrates alerting or session protection when the accepted limit is exceeded.

Explanation

Correct Answer

D:

For an enterprise core exchanging BGP routes over redundant WAN paths, the decisive evidence is: A bounded test demonstrates alerting or session protection when the accepted limit is exceeded. This validates the action: Configure reasonable warning and hard limits appropriate to each authorized address family. Because: A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones. The appropriate correction for the reported case is: Configure reasonable warning and hard limits appropriate to each authorized address family.

B:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. Fixing that different mechanism would not address the current root cause: a BGP prefix-limit control detects or constrains excessive received NLRI from a peer.

C:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Its verification is distinct from the reported condition: A neighbor mistakenly announces hundreds of thousands of unexpected routes and threatens routing memory. The chosen route must have a valid data-plane next hop.

Question 337

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: Branch OSPF peers need one controlled default exit but the upstream router floods many unnecessary external routes. The routing change must preserve control-plane consistency across areas. Which observation proves this requirement has been satisfied?

  1. Branch routers receive a default route and reach the approved upstream network.
  2. show route protocol ospf on another router reveals the advertised external prefix.
  3. show route detail indicates the active entry and its protocol preference for the prefix.
  4. An injected forwarding failure brings down the affected neighbor within the planned interval.

Explanation

Correct Answer

A:

For a university separating multiple OSPF areas, the decisive evidence is: Branch routers receive a default route and reach the approved upstream network. This validates the action: Export only the authorized default route and confirm its next-hop and forwarding path. Because: A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. The appropriate correction for the reported case is: Export only the authorized default route and confirm its next-hop and forwarding path.

C:

Junos first chooses active routing-table entries using protocol route preference before forwarding installation. Fixing that different mechanism would not address the current root cause: a scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid.

D:

Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. Its verification is distinct from the reported condition: Branch OSPF peers need one controlled default exit but the upstream router floods many unnecessary external routes. The routing change must preserve control-plane consistency across areas.

Question 338

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: An enterprise wants to protect a BGP session from a spoofed adjacent TCP peer. The chosen route must have a valid data-plane next hop. What verification result should the engineer expect?

  1. An IPv6 test prefix appears in received BGP routes with a reachable IPv6 next hop.
  2. The authorized peer establishes while a test using incorrect credentials is refused.
  3. The cooperating neighbor selects the intended ingress for otherwise matching routes.
  4. show bgp summary identifies the internal peer in Established state.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the decisive evidence is: The authorized peer establishes while a test using incorrect credentials is refused. This validates the action: Enable matching supported BGP authentication keys on both sides and test staged replacement. Because: Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. The appropriate correction for the reported case is: Enable matching supported BGP authentication keys on both sides and test staged replacement.

C:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Fixing that different mechanism would not address the current root cause: compatible TCP-level BGP authentication methods can verify the configured neighbor relationship.

D:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Its verification is distinct from the reported condition: An enterprise wants to protect a BGP session from a spoofed adjacent TCP peer. The chosen route must have a valid data-plane next hop.

Question 339

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: A dual-homed server should use both eligible attachments but its EVPN configuration uses a standby-only design. The engineer must verify both BGP EVPN signaling and underlay reachability. What requirement most specifically calls for this approach?

  1. Use EVPN route-target policy to control overlay route membership between tenants.
  2. Use EVPN type-1 routes for Ethernet segment reachability and efficient multihoming withdrawal.
  3. Use all-active EVPN multihoming for simultaneous eligible forwarding across redundant PEs.
  4. Use single-active EVPN multihoming when only one attached PE should forward at a time.

Explanation

Correct Answer

C:

For a service provider offering isolated VXLAN services, this mechanism fits the requirement: Use all-active EVPN multihoming for simultaneous eligible forwarding across redundant PEs. The design is appropriate because: EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention. In this scenario, the observed issue is: A dual-homed server should use both eligible attachments but its EVPN configuration uses a standby-only design. The corresponding implementation is: Configure supported all-active Ethernet segment multihoming and consistent ESI state.

Incorrect Answers

A:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. The appropriate correction for the reported case is: Configure supported all-active Ethernet segment multihoming and consistent ESI state.

B:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Fixing that different mechanism would not address the current root cause: EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention.

D:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. Its verification is distinct from the reported condition: A dual-homed server should use both eligible attachments but its EVPN configuration uses a standby-only design. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 340

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The tenant traffic must remain isolated across the overlay. What would demonstrate a successful correction under test?

  1. A remote EVPN MAC table resolves the host to the expected originating VTEP.
  2. Remote leaves update the affected MAC destination to the new VTEP after the controlled move.
  3. Only matching tenant MAC and prefix advertisements enter each isolated EVPN instance.
  4. The remote IP-VRF learns the approved prefix with valid overlay next-hop resolution.

Explanation

Correct Answer

D:

For a Junos EVPN-VXLAN leaf-spine fabric, the decisive evidence is: The remote IP-VRF learns the approved prefix with valid overlay next-hop resolution. This validates the action: Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets. Because: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. The appropriate correction for the reported case is: Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets.

B:

EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. Fixing that different mechanism would not address the current root cause: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs.

C:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. Its verification is distinct from the reported condition: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The tenant traffic must remain isolated across the overlay.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests