mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 26

Question 250

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The chosen route must have a valid data-plane next hop. What important rollout safeguard is most relevant here?

  1. Check local preference and next-hop reachability first because they can override this comparison.
  2. Do not prepend sensitive internal ASNs indiscriminately or claim guaranteed internet-wide steering.
  3. Account for protocol default export rules and route activity before assuming all table entries advertise.
  4. Check symmetry, device scale and policy before enabling multipath on unequal links.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the relevant safeguard is: Do not prepend sensitive internal ASNs indiscriminately or claim guaranteed internet-wide steering. It matters while implementing: Apply targeted AS-path prepend in an authorized export policy for the backup link. The fault involves: AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. The required acceptance result remains: The upstream receives the appended path and a controlled test prefers the primary ingress.

Incorrect Answers

A:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. The appropriate correction for the reported case is: Do not prepend sensitive internal ASNs indiscriminately or claim guaranteed internet-wide steering.

C:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Fixing that different mechanism would not address the current root cause: AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection.

D:

BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. Its verification is distinct from the reported condition: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The chosen route must have a valid data-plane next hop.

Question 251

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The internal forwarding path must remain stable when one uplink fails. For which use case is this feature the best match?

  1. Use OSPF LSDB inspection before changing unrelated next-hop forwarding settings.
  2. Use BFD to shorten routing failure detection without relying solely on OSPF dead timers.
  3. Use matching Hello and dead timers when a link needs a stable OSPF neighbor relationship.
  4. Use explicit per-interface OSPF area membership to form an approved internal adjacency.

Explanation

Correct Answer

C:

For a national enterprise designing OSPF between offices, this mechanism fits the requirement: Use matching Hello and dead timers when a link needs a stable OSPF neighbor relationship. The design is appropriate because: Neighbor compatibility depends on matching Hello and dead intervals for the participating link. In this scenario, the observed issue is: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The corresponding implementation is: Align supported OSPF Hello and dead intervals on both neighboring interfaces.

Incorrect Answers

A:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. The appropriate correction for the reported case is: Align supported OSPF Hello and dead intervals on both neighboring interfaces.

B:

Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. Fixing that different mechanism would not address the current root cause: neighbor compatibility depends on matching Hello and dead intervals for the participating link.

D:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Its verification is distinct from the reported condition: A pair of OSPF speakers exchanges packets but reports timer mismatch and no stable adjacency. The internal forwarding path must remain stable when one uplink fails.

Question 252

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: Two parallel switch uplinks form a Layer 2 loop because they were attached without a compatible aggregation design. The intended segmentation and loop prevention must remain intact. What risk must the implementation avoid?

  1. Check instance-to-VLAN mapping agreement across every switch in the region.
  2. Check ELS platform syntax rather than copying legacy switch syntax without validation.
  3. Check MAC aging and port movement before pinning static entries.
  4. Check LACP mode, member speed and VLAN consistency before bringing up the bundle.

Explanation

Correct Answer

D:

For a campus network built with Juniper EX switches, the relevant safeguard is: Check LACP mode, member speed and VLAN consistency before bringing up the bundle. It matters while implementing: Configure supported LACP or static aggregated Ethernet on both ends as appropriate. The fault involves: A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. The required acceptance result remains: The aggregate reports active members and traffic survives loss of one constituent link.

Incorrect Answers

A:

Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances. The appropriate correction for the reported case is: Check LACP mode, member speed and VLAN consistency before bringing up the bundle.

B:

Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. Fixing that different mechanism would not address the current root cause: a link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree.

C:

Layer 2 switches learn source MAC addresses on ingress ports and forward known unicast using their MAC tables. Its verification is distinct from the reported condition: Two parallel switch uplinks form a Layer 2 loop because they were attached without a compatible aggregation design. The intended segmentation and loop prevention must remain intact.

Question 253

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A service provider must carry identical customer VLAN IDs from different tenants without mixing their traffic. The proposed behavior must be validated on actual switching ports. Which technical mechanism most directly explains the symptom?

  1. IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.
  2. A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate.
  3. Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces.
  4. Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU.

Explanation

Correct Answer

A:

For a data-center access fabric using tagged trunks, the governing mechanism is: IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. It explains the reported symptom: A service provider must carry identical customer VLAN IDs from different tenants without mixing their traffic. The intended response is: Configure supported provider bridging with a distinct service tag for each tenant context. Verification: Captures show preserved inner customer tags inside the expected outer service tag.

Incorrect Answers

B:

A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate. This alternative mechanism does not match the current fault.

C:

Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. Fixing that different mechanism would not address the current root cause: IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag.

D:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Its verification is distinct from the reported condition: A service provider must carry identical customer VLAN IDs from different tenants without mixing their traffic. The proposed behavior must be validated on actual switching ports.

Question 254

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: EVPN route advertisements are received but encapsulated VXLAN data packets fail between leaf switches. The tenant traffic must remain isolated across the overlay. What verification result should the engineer expect?

  1. The remote IP-VRF learns the approved prefix with valid overlay next-hop resolution.
  2. A test VXLAN packet reaches the remote VTEP with successful decapsulation and host delivery.
  3. A test host in one VLAN exchanges frames only with its matching remote VNI segment.
  4. Each PE sees its expected remote multihoming peers and a consistent segment identity.

Explanation

Correct Answer

B:

For a Junos EVPN-VXLAN leaf-spine fabric, the decisive evidence is: A test VXLAN packet reaches the remote VTEP with successful decapsulation and host delivery. This validates the action: Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability. Because: VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. The appropriate correction for the reported case is: Repair underlay routes, relevant UDP encapsulation permission and VTEP reachability.

C:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Fixing that different mechanism would not address the current root cause: VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity.

D:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Its verification is distinct from the reported condition: EVPN route advertisements are received but encapsulated VXLAN data packets fail between leaf switches. The tenant traffic must remain isolated across the overlay.

Question 255

At an enterprise replacing legacy IP handsets, a Junos specialist investigates this scenario: A high-capacity phone reports insufficient power even though the switch's overall power budget is adequate. The team must check phone support and PoE capacity before cutover. What important rollout safeguard is most relevant here?

  1. Confirm phone model and manufacturer support instead of assuming all endpoints interpret MED TLVs.
  2. Do not exceed chassis supply or line-card power availability based only on per-port ratings.
  3. Review platform limits before claiming all phone accessories can receive unlimited PoE.
  4. Do not blindly trust DSCP or 802.1p markings from untrusted downstream computers.

Explanation

Correct Answer

C:

For an enterprise replacing legacy IP handsets, the relevant safeguard is: Review platform limits before claiming all phone accessories can receive unlimited PoE. It matters while implementing: Check LLDP-MED power negotiation and available power on the phone's switch interface. The fault involves: Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. The required acceptance result remains: Switch and phone agree on the needed power allocation and optional hardware stays enabled.

Incorrect Answers

A:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. The appropriate correction for the reported case is: Review platform limits before claiming all phone accessories can receive unlimited PoE.

B:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Fixing that different mechanism would not address the current root cause: supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions.

D:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. Its verification is distinct from the reported condition: A high-capacity phone reports insufficient power even though the switch's overall power budget is adequate. The team must check phone support and PoE capacity before cutover.

Question 256

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: An OSPF route and a BGP route for the same prefix are both learned but only one enters active forwarding. The routing change must preserve control-plane consistency across areas. What protocol behavior accounts for this failure?

  1. OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs.
  2. The OSPF router ID uniquely identifies an originator of link-state information within the routing domain.
  3. Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully.
  4. Junos first chooses active routing-table entries using protocol route preference before forwarding installation.

Explanation

Correct Answer

D:

For a university separating multiple OSPF areas, the governing mechanism is: Junos first chooses active routing-table entries using protocol route preference before forwarding installation. It explains the reported symptom: An OSPF route and a BGP route for the same prefix are both learned but only one enters active forwarding. The intended response is: Compare route preference and next-hop resolution before modifying any active path policy. Verification: show route detail indicates the active entry and its protocol preference for the prefix.

Incorrect Answers

A:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. This alternative mechanism does not match the current fault.

B:

The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. Fixing that different mechanism would not address the current root cause: junos first chooses active routing-table entries using protocol route preference before forwarding installation.

C:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Its verification is distinct from the reported condition: An OSPF route and a BGP route for the same prefix are both learned but only one enters active forwarding. The routing change must preserve control-plane consistency across areas.

Question 257

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: A busy output queue suffers severe tail drop and interactive applications need controlled early loss behavior. The improvement must not starve business traffic. What protocol behavior accounts for this failure?

  1. A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion.
  2. A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class.
  3. A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.
  4. A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior.

Explanation

Correct Answer

A:

For a campus switch team configuring Junos egress queues, the governing mechanism is: A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. It explains the reported symptom: A busy output queue suffers severe tail drop and interactive applications need controlled early loss behavior. The intended response is: Apply a suitable RED or weighted drop profile through the appropriate scheduler. Verification: Congestion tests show the intended early-drop curve without unbounded queue growth.

Incorrect Answers

B:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. This alternative mechanism does not match the current fault.

C:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Fixing that different mechanism would not address the current root cause: a Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion.

D:

A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. Its verification is distinct from the reported condition: A busy output queue suffers severe tail drop and interactive applications need controlled early loss behavior. The improvement must not starve business traffic.

Question 258

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The engineer must verify both BGP EVPN signaling and underlay reachability. Which operational result would most clearly confirm the fix?

  1. A test host in one VLAN exchanges frames only with its matching remote VNI segment.
  2. A maximum-size approved test payload crosses the VXLAN tunnel without fragmentation-related failure.
  3. Only the elected active side forwards tenant traffic until controlled failover.
  4. The remote IP-VRF learns the approved prefix with valid overlay next-hop resolution.

Explanation

Correct Answer

B:

For a service provider offering isolated VXLAN services, the decisive evidence is: A maximum-size approved test payload crosses the VXLAN tunnel without fragmentation-related failure. This validates the action: Provide sufficient underlay MTU for the intended inner payload or constrain end-host MTU safely. Because: VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. The appropriate correction for the reported case is: Provide sufficient underlay MTU for the intended inner payload or constrain end-host MTU safely.

C:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. Fixing that different mechanism would not address the current root cause: VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames.

D:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Its verification is distinct from the reported condition: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 259

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A Junos switch physical port is configured without suitable Layer 2 logical interface family and VLAN traffic never bridges. The service must preserve tags without bridging unrelated tenants. What requirement most specifically calls for this approach?

  1. Use private VLAN isolated ports for same-subnet tenant isolation.
  2. Use Q-in-Q to transport customer VLAN tags through a provider Ethernet domain.
  3. Use family ethernet-switching on supported switch logical interfaces.
  4. Use root protection to keep the intended spanning-tree root hierarchy.

Explanation

Correct Answer

C:

For a provider Ethernet network carrying customer Layer 2 services, this mechanism fits the requirement: Use family ethernet-switching on supported switch logical interfaces. The design is appropriate because: Junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces. In this scenario, the observed issue is: A Junos switch physical port is configured without suitable Layer 2 logical interface family and VLAN traffic never bridges. The corresponding implementation is: Configure the intended ethernet-switching family and interface mode at supported hierarchy.

Incorrect Answers

A:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. The appropriate correction for the reported case is: Configure the intended ethernet-switching family and interface mode at supported hierarchy.

B:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. Fixing that different mechanism would not address the current root cause: junos enhanced Layer 2 switching uses family ethernet-switching configuration on eligible logical interfaces.

D:

Root protection can prevent a specified port from accepting an unexpected superior root advertisement. Its verification is distinct from the reported condition: A Junos switch physical port is configured without suitable Layer 2 logical interface family and VLAN traffic never bridges. The service must preserve tags without bridging unrelated tenants.

Question 260

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Two adjacent switches use MSTP but appear to occupy different regions despite a shared physical trunk. The change must retain both link resilience and correct VLAN isolation. What is the most appropriate correction to implement?

  1. Assign the appropriate VLANs to the intended MST instances and set designated roots.
  2. Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN.
  3. Configure supported VSTP membership and root priorities for the chosen VLANs.
  4. Align the MSTP region attributes and intended VLAN mappings across the switches.

Explanation

Correct Answer

D:

For a large enterprise updating redundant switch links, the direct corrective action is: Align the MSTP region attributes and intended VLAN mappings across the switches. This addresses the mechanism: MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. Confirm by checking: Operational state shows common region information and expected instance boundaries. During rollout, avoid partial region updates that temporarily create different spanning-tree domains.

Incorrect Answers

A:

Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances. The appropriate correction for the reported case is: Align the MSTP region attributes and intended VLAN mappings across the switches.

B:

Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. Fixing that different mechanism would not address the current root cause: MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest.

C:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. Its verification is distinct from the reported condition: Two adjacent switches use MSTP but appear to occupy different regions despite a shared physical trunk. The change must retain both link resilience and correct VLAN isolation.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests