mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 25

Question 240

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: OSPF automatically assigned metrics do not distinguish two high-speed interfaces at the intended precision. The correction must not expose administrative network prefixes. Which limitation should guide the change control?

  1. Verify both ends and vendor interoperability before changing interface type.
  2. Do not reset stable adjacencies merely because a non-DR neighbor is TwoWay on broadcast media.
  3. Avoid shortening dead timers without checking CPU load and adjacent platform support.
  4. Keep reference bandwidth consistent across routers to avoid asymmetric route decisions.

Explanation

Correct Answer

D:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Keep reference bandwidth consistent across routers to avoid asymmetric route decisions. It matters while implementing: Set a suitable reference bandwidth for automatic cost calculation on relevant OSPF speakers. The fault involves: OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain. The required acceptance result remains: show ospf interface reports costs appropriate to the configured link speeds.

Incorrect Answers

A:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. The appropriate correction for the reported case is: Keep reference bandwidth consistent across routers to avoid asymmetric route decisions.

B:

OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. Fixing that different mechanism would not address the current root cause: OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain.

C:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. Its verification is distinct from the reported condition: OSPF automatically assigned metrics do not distinguish two high-speed interfaces at the intended precision. The correction must not expose administrative network prefixes.

Question 241

At a new office connecting VoIP phones to EX access switches, a Junos specialist investigates this scenario: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The rollout must support phones and connected workstations securely. Which limitation should guide the change control?

  1. Do not blindly trust DSCP or 802.1p markings from untrusted downstream computers.
  2. Do not exceed chassis supply or line-card power availability based only on per-port ratings.
  3. Review platform limits before claiming all phone accessories can receive unlimited PoE.
  4. Check access policy and trunk tagging without granting the PC unauthorized voice-network privileges.

Explanation

Correct Answer

A:

For a new office connecting VoIP phones to EX access switches, the relevant safeguard is: Do not blindly trust DSCP or 802.1p markings from untrusted downstream computers. It matters while implementing: Classify the authorized voice traffic and apply suitable per-port QoS mapping separately from PC traffic. The fault involves: Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. The required acceptance result remains: Phone packets receive intended priority during congestion and desktop traffic cannot impersonate it.

Incorrect Answers

B:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. The appropriate correction for the reported case is: Do not blindly trust DSCP or 802.1p markings from untrusted downstream computers.

C:

Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. Fixing that different mechanism would not address the current root cause: voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment.

D:

A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. Its verification is distinct from the reported condition: A phone's voice frames receive best-effort treatment when a computer behind it saturates the uplink. The rollout must support phones and connected workstations securely.

Question 242

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: Branch OSPF peers need one controlled default exit but the upstream router floods many unnecessary external routes. The correction must not expose administrative network prefixes. What risk must the implementation avoid?

  1. Do not redistribute every static route or default route without an approved prefix filter.
  2. Avoid originating a default to a dead WAN without route tracking or failover planning.
  3. Do not reset stable adjacencies merely because a non-DR neighbor is TwoWay on broadcast media.
  4. Coordinate key rotation to avoid simultaneous loss of all redundant routing adjacencies.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Avoid originating a default to a dead WAN without route tracking or failover planning. It matters while implementing: Export only the authorized default route and confirm its next-hop and forwarding path. The fault involves: A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. The required acceptance result remains: Branch routers receive a default route and reach the approved upstream network.

Incorrect Answers

A:

Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. The appropriate correction for the reported case is: Avoid originating a default to a dead WAN without route tracking or failover planning.

C:

OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. Fixing that different mechanism would not address the current root cause: a scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid.

D:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. Its verification is distinct from the reported condition: Branch OSPF peers need one controlled default exit but the upstream router floods many unnecessary external routes. The correction must not expose administrative network prefixes.

Question 243

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The internal forwarding path must remain stable when one uplink fails. What risk must the implementation avoid?

  1. Avoid shortening dead timers without checking CPU load and adjacent platform support.
  2. Do not remove required link-local communication while tightening IPv6 filters.
  3. Treat a virtual link as a controlled exception and plan a physical backbone repair.
  4. Verify both ends and vendor interoperability before changing interface type.

Explanation

Correct Answer

C:

For a national enterprise designing OSPF between offices, the relevant safeguard is: Treat a virtual link as a controlled exception and plan a physical backbone repair. It matters while implementing: Configure the same transit area and peer router identifiers at both virtual-link endpoints. The fault involves: A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. The required acceptance result remains: The virtual link reaches the expected operational state and the remote area receives backbone routes.

Incorrect Answers

A:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. The appropriate correction for the reported case is: Treat a virtual link as a controlled exception and plan a physical backbone repair.

B:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Fixing that different mechanism would not address the current root cause: a supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs.

D:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. Its verification is distinct from the reported condition: A legacy area requires backbone reachability through a transit area while direct area-zero attachment is temporarily unavailable. The internal forwarding path must remain stable when one uplink fails.

Question 244

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: The operations team sees (S,G) entries and assumes they mean every source may send to a joined group. The group traffic must reach interested receivers without flooding other locations. Which response best restores the intended behavior?

  1. Allocate an appropriate multicast group address in a scope permitted for the enterprise distribution.
  2. Correct the unicast route or multicast RPF path so the packet arrives on the accepted upstream interface.
  3. Match and reject the prohibited source-group combinations with a suitable Junos multicast policy.
  4. Inspect the source and group state to diagnose the correct sender-specific distribution tree.

Explanation

Correct Answer

D:

For a campus distributing IP video to several buildings, the direct corrective action is: Inspect the source and group state to diagnose the correct sender-specific distribution tree. This addresses the mechanism: (S,G) multicast state identifies one particular source S and destination group G. Confirm by checking: show multicast route or PIM state contains the planned source-group combination. During rollout, do not interpret (*,G) shared-tree membership as proof that a particular source is forwarding.

Incorrect Answers

A:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. The appropriate correction for the reported case is: Inspect the source and group state to diagnose the correct sender-specific distribution tree.

B:

Multicast reverse-path forwarding verifies that a packet arrives via a valid route back toward its source or RP. Fixing that different mechanism would not address the current root cause: (S,G) multicast state identifies one particular source S and destination group G.

C:

PIM and multicast routing policy can be applied to limit permitted source and group reachability. Its verification is distinct from the reported condition: The operations team sees (S,G) entries and assumes they mean every source may send to a joined group. The group traffic must reach interested receivers without flooding other locations.

Question 245

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: Many ASM receivers depend on one RP and lose initial source discovery after that device fails. The team should test joins and forwarding separately. Which response best restores the intended behavior?

  1. Deploy supported anycast RP members with the necessary source-state exchange mechanism.
  2. Apply explicit multicast scope or PIM routing policy at the relevant domain boundary.
  3. Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling.
  4. Configure a compatible bootstrap router and candidate RP strategy within the intended administrative scope.

Explanation

Correct Answer

A:

For an enterprise telemetry network with multicast subscribers, the direct corrective action is: Deploy supported anycast RP members with the necessary source-state exchange mechanism. This addresses the mechanism: Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. Confirm by checking: After one RP fails, new group joins reach the surviving RP and active sources remain discoverable. During rollout, verify MSDP or supported PIM-based state synchronization according to the chosen anycast model.

Incorrect Answers

B:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. The appropriate correction for the reported case is: Deploy supported anycast RP members with the necessary source-state exchange mechanism.

C:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Fixing that different mechanism would not address the current root cause: anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance.

D:

PIM bootstrap router mechanisms can advertise eligible RP information to routers in the multicast domain. Its verification is distinct from the reported condition: Many ASM receivers depend on one RP and lose initial source discovery after that device fails. The team should test joins and forwarding separately.

Question 246

At a branch introducing an IP telephony access layer, a Junos specialist investigates this scenario: A phone boots on one switch but repeatedly power-cycles when many phones connect to another switch. The solution should not give workstation traffic untrusted voice privileges. Which operational result would most clearly confirm the fix?

  1. Switch power telemetry shows the correct allocated class and the phone operates stably.
  2. The phone stays powered under a representative simultaneous high-load endpoint test.
  3. Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN.
  4. The phone registers in the voice VLAN and the connected PC receives data-VLAN connectivity.

Explanation

Correct Answer

B:

For a branch introducing an IP telephony access layer, the decisive evidence is: The phone stays powered under a representative simultaneous high-load endpoint test. This validates the action: Verify total PoE capacity and allocate sufficient per-port power for the installed phones. Because: PoE availability depends on available switch power budget and each attached device's negotiated consumption. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

PoE power classification informs the power source of the powered device's required allocation. The appropriate correction for the reported case is: Verify total PoE capacity and allocate sufficient per-port power for the installed phones.

C:

A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. Fixing that different mechanism would not address the current root cause: poE availability depends on available switch power budget and each attached device's negotiated consumption.

D:

An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior. Its verification is distinct from the reported condition: A phone boots on one switch but repeatedly power-cycles when many phones connect to another switch. The solution should not give workstation traffic untrusted voice privileges.

Question 247

At a managed office network with printers and laptops, a Junos specialist investigates this scenario: A guest must accept access conditions in a browser before reaching a limited public LAN. The switch must distinguish identity failures from absent authentication responses. What would demonstrate a successful correction under test?

  1. Each simulated endpoint type follows the correct method and receives its matching access policy.
  2. The wrong-credential test client reaches only the intended reject services and not protected LANs.
  3. The guest sees the authorized portal and only obtains permitted access after the expected process.
  4. An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state.

Explanation

Correct Answer

C:

For a managed office network with printers and laptops, the decisive evidence is: The guest sees the authorized portal and only obtains permitted access after the expected process. This validates the action: Configure supported captive-portal access and browser redirection with suitable authentication infrastructure. Because: Captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Multiple authentication methods can have defined precedence and permitted fallback behavior depending on endpoint response. The appropriate correction for the reported case is: Configure supported captive-portal access and browser redirection with suitable authentication infrastructure.

B:

A RADIUS Access-Reject event is distinct from a silent client and can be mapped to an appropriate reject VLAN. Fixing that different mechanism would not address the current root cause: captive portal authentication can redirect eligible unauthenticated traffic to an approved web-based onboarding flow.

D:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Its verification is distinct from the reported condition: A guest must accept access conditions in a browser before reaching a limited public LAN. The switch must distinguish identity failures from absent authentication responses.

Question 248

At a new office connecting VoIP phones to EX access switches, a Junos specialist investigates this scenario: A phone's integrated PC switch port works but the downstream computer never reaches the data VLAN. The rollout must support phones and connected workstations securely. Which limitation should guide the change control?

  1. Do not exceed chassis supply or line-card power availability based only on per-port ratings.
  2. Verify the negotiated class and switch feature support before overriding port power limits.
  3. Do not blindly trust DSCP or 802.1p markings from untrusted downstream computers.
  4. Verify 802.1X and MAC RADIUS behavior separately for phone and PC identities.

Explanation

Correct Answer

D:

For a new office connecting VoIP phones to EX access switches, the relevant safeguard is: Verify 802.1X and MAC RADIUS behavior separately for phone and PC identities. It matters while implementing: Validate the phone passthrough configuration and Junos port VLAN membership for both traffic types. The fault involves: An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior. The required acceptance result remains: The phone registers in the voice VLAN and the connected PC receives data-VLAN connectivity.

Incorrect Answers

A:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. The appropriate correction for the reported case is: Verify 802.1X and MAC RADIUS behavior separately for phone and PC identities.

B:

PoE power classification informs the power source of the powered device's required allocation. Fixing that different mechanism would not address the current root cause: An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior.

C:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. Its verification is distinct from the reported condition: A phone's integrated PC switch port works but the downstream computer never reaches the data VLAN. The rollout must support phones and connected workstations securely.

Question 249

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A team treats a two-way neighbor state as a complete adjacency on every network type. The team must validate neighbor state rather than assume basic IP reachability proves routing. What requirement most specifically calls for this approach?

  1. Use OSPF neighbor-state interpretation to distinguish normal election behavior from failures.
  2. Use a temporary virtual link when an OSPF backbone partition has a valid transit path.
  3. Use SPF diagnostics to identify repeated topology-triggered route recalculation.
  4. Use NSSA when a limited external-route origin must exist inside an OSPF area.

Explanation

Correct Answer

A:

For a regional provider operating Junos-based branch routers, this mechanism fits the requirement: Use OSPF neighbor-state interpretation to distinguish normal election behavior from failures. The design is appropriate because: OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. In this scenario, the observed issue is: A team treats a two-way neighbor state as a complete adjacency on every network type. The corresponding implementation is: Read network type and DR/BDR election results when interpreting show ospf neighbor.

Incorrect Answers

B:

A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. The appropriate correction for the reported case is: Read network type and DR/BDR election results when interpreting show ospf neighbor.

C:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. Fixing that different mechanism would not address the current root cause: OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full.

D:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Its verification is distinct from the reported condition: A team treats a two-way neighbor state as a complete adjacency on every network type. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 250

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The chosen route must have a valid data-plane next hop. What important rollout safeguard is most relevant here?

  1. Check local preference and next-hop reachability first because they can override this comparison.
  2. Do not prepend sensitive internal ASNs indiscriminately or claim guaranteed internet-wide steering.
  3. Account for protocol default export rules and route activity before assuming all table entries advertise.
  4. Check symmetry, device scale and policy before enabling multipath on unequal links.

Explanation

Correct Answer

B:

For an enterprise core exchanging BGP routes over redundant WAN paths, the relevant safeguard is: Do not prepend sensitive internal ASNs indiscriminately or claim guaranteed internet-wide steering. It matters while implementing: Apply targeted AS-path prepend in an authorized export policy for the backup link. The fault involves: AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. The required acceptance result remains: The upstream receives the appended path and a controlled test prefers the primary ingress.

Incorrect Answers

A:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. The appropriate correction for the reported case is: Do not prepend sensitive internal ASNs indiscriminately or claim guaranteed internet-wide steering.

C:

BGP export policy controls which eligible active routes the speaker announces to selected neighbors. Fixing that different mechanism would not address the current root cause: AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection.

D:

BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. Its verification is distinct from the reported condition: An enterprise wants to make one inbound route advertisement less attractive without withdrawing reachability. The chosen route must have a valid data-plane next hop.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests