mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 24

Question 230

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The diagnosis must distinguish a healthy BGP session from eligible received routes. What would demonstrate a successful correction under test?

  1. A policy test or advertised-route output confirms restricted prefixes are no longer accepted.
  2. show route protocol bgp reveals the selected path and its AS-path sequence.
  3. The upstream receives the appended path and a controlled test prefers the primary ingress.
  4. The cooperating neighbor selects the intended ingress for otherwise matching routes.

Explanation

Correct Answer

B:

For a managed network team troubleshooting an internet edge, the decisive evidence is: show route protocol BGP reveals the selected path and its AS-path sequence. This validates the action: Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified. Because: In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos policy terms are evaluated in configured order and a terminating action can end processing early. The appropriate correction for the reported case is: Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified.

C:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. Fixing that different mechanism would not address the current root cause: In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.

D:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Its verification is distinct from the reported condition: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 231

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The internal forwarding path must remain stable when one uplink fails. For which use case is this feature the best match?

  1. Use OSPF interarea summarization when contiguous reachability can be represented safely.
  2. Use BFD to shorten routing failure detection without relying solely on OSPF dead timers.
  3. Use passive OSPF interfaces for stub LANs without routing neighbors.
  4. Use explicit per-interface OSPF area membership to form an approved internal adjacency.

Explanation

Correct Answer

C:

For a national enterprise designing OSPF between offices, this mechanism fits the requirement: Use passive OSPF interfaces for stub LANs without routing neighbors. The design is appropriate because: A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos. In this scenario, the observed issue is: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The corresponding implementation is: Configure supported OSPF passive behavior on the host-facing interface.

Incorrect Answers

A:

An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. The appropriate correction for the reported case is: Configure supported OSPF passive behavior on the host-facing interface.

B:

Bidirectional Forwarding Detection can provide rapid independent liveliness detection for supported routing peers. Fixing that different mechanism would not address the current root cause: a passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos.

D:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Its verification is distinct from the reported condition: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The internal forwarding path must remain stable when one uplink fails.

Question 232

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The engineer must verify both BGP EVPN signaling and underlay reachability. Which technical mechanism most directly explains the symptom?

  1. EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment.
  2. EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE.
  3. EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership.
  4. EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information.

Explanation

Correct Answer

D:

For a service provider offering isolated VXLAN services, the governing mechanism is: EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. It explains the reported symptom: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The intended response is: Enable a supported EVPN BGP signaling relationship with the intended route targets and instances. Verification: show route table BGP.evpn.0 or equivalent EVPN table contains valid remote routes.

Incorrect Answers

A:

EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment. This alternative mechanism does not match the current fault.

B:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. Fixing that different mechanism would not address the current root cause: EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information.

C:

EVPN route type 3 carries inclusive multicast Ethernet tag information used to establish BUM replication membership. Its verification is distinct from the reported condition: Two VXLAN leaf switches have IP reachability but do not exchange learned remote MAC reachability. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 233

At a hospital onboarding diverse employee devices, a Junos specialist investigates this scenario: A RADIUS server outage causes all access switches to block critical devices with no approved fallback behavior. Critical permitted endpoints need a documented authentication fallback. What would demonstrate a successful correction under test?

  1. Existing and new devices follow the approved fallback behavior while the server is unreachable.
  2. An EAPOL attempt leads to the intended RADIUS Access-Request and a resulting authorization decision.
  3. The intended printer gains restricted access while an unrecognized MAC does not inherit privileged resources.
  4. An authorized laptop passes EAP authentication and the controlled port enters an approved authorized state.

Explanation

Correct Answer

A:

For a hospital onboarding diverse employee devices, the decisive evidence is: Existing and new devices follow the approved fallback behavior while the server is unreachable. This validates the action: Set an explicit supported fallback policy and test a simulated RADIUS timeout. Because: Server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

In common 802.1X switching, the supplicant exchanges EAPOL with the authenticator, which relays authentication toward a RADIUS server. The appropriate correction for the reported case is: Set an explicit supported fallback policy and test a simulated RADIUS timeout.

C:

MAC RADIUS can authenticate eligible non-802.1X endpoints using MAC-based identity against approved RADIUS policy. Fixing that different mechanism would not address the current root cause: server fail fallback controls permit, deny, cached access or restricted VLAN assignment when authentication infrastructure is unavailable.

D:

802.1X uses a supplicant, switch authenticator and authentication server to validate identity before controlled port access. Its verification is distinct from the reported condition: A RADIUS server outage causes all access switches to block critical devices with no approved fallback behavior. Critical permitted endpoints need a documented authentication fallback.

Question 234

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: Repeated topology flaps produce transient internal route changes and high routing-process load. The correction must not expose administrative network prefixes. What would demonstrate a successful correction under test?

  1. Remote areas receive the expected summarized routes and excluded addresses do not blackhole.
  2. OSPF topology and route-change counters settle after fault correction.
  3. Trace messages show the relevant neighbor-state transition and correction removes the repeat failure.
  4. The peer appears in show ospf neighbor and the local interface appears in show ospf interface.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, the decisive evidence is: OSPF topology and route-change counters settle after fault correction. This validates the action: Find the unstable interface or neighbor and stabilize its physical or protocol conditions. Because: Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. The appropriate correction for the reported case is: Find the unstable interface or neighbor and stabilize its physical or protocol conditions.

C:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Fixing that different mechanism would not address the current root cause: link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB.

D:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Its verification is distinct from the reported condition: Repeated topology flaps produce transient internal route changes and high routing-process load. The correction must not expose administrative network prefixes.

Question 235

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: Junos CoS classifiers and schedulers are configured but packets continue to use unexpected default queues. Classification and downstream remarking must not be confused. Which design objective is best served by this mechanism?

  1. Use classification for local queue selection and rewrite for downstream codepoint presentation.
  2. Use scheduler transmit rates to allocate egress bandwidth among traffic classes.
  3. Use a scheduler map to connect forwarding classes to egress scheduling behavior.
  4. Use 802.1p classification on trusted VLAN-tagged Ethernet traffic.

Explanation

Correct Answer

C:

For a financial services network enforcing trusted DSCP markings, this mechanism fits the requirement: Use a scheduler map to connect forwarding classes to egress scheduling behavior. The design is appropriate because: A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. In this scenario, the observed issue is: Junos CoS classifiers and schedulers are configured but packets continue to use unexpected default queues. The corresponding implementation is: Attach the intended scheduler map to the correct supported egress interface.

Incorrect Answers

A:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. The appropriate correction for the reported case is: Attach the intended scheduler map to the correct supported egress interface.

B:

Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. Fixing that different mechanism would not address the current root cause: a scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior.

D:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. Its verification is distinct from the reported condition: Junos CoS classifiers and schedulers are configured but packets continue to use unexpected default queues. Classification and downstream remarking must not be confused.

Question 236

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: Two available OSPF WAN paths use the less desirable circuit even though both adjacencies are healthy. The internal forwarding path must remain stable when one uplink fails. Which response best restores the intended behavior?

  1. Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.
  2. Enable limited OSPF traceoptions with bounded logging, capture the failure and remove them afterward.
  3. Configure appropriate ABR area-range summarization with valid aggregate boundaries.
  4. Set appropriate interface metrics that reflect the desired route costs across the topology.

Explanation

Correct Answer

D:

For a national enterprise designing OSPF between offices, the direct corrective action is: Set appropriate interface metrics that reflect the desired route costs across the topology. This addresses the mechanism: OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. Confirm by checking: The intended path has lower total cost and appears as the active route for a test prefix. During rollout, check bidirectional traffic and backup capacity before adjusting link metrics.

Incorrect Answers

A:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. The appropriate correction for the reported case is: Set appropriate interface metrics that reflect the desired route costs across the topology.

B:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Fixing that different mechanism would not address the current root cause: OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits.

C:

An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. Its verification is distinct from the reported condition: Two available OSPF WAN paths use the less desirable circuit even though both adjacencies are healthy. The internal forwarding path must remain stable when one uplink fails.

Question 237

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A BGP neighbor uses an AS number above the two-byte range but older configuration assumes a 16-bit value. The chosen route must have a valid data-plane next hop. Which technical mechanism most directly explains the symptom?

  1. BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing.
  2. Junos route filters distinguish exact matching from longer or longer-prefix patterns.
  3. In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.
  4. A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint.

Explanation

Correct Answer

A:

For an enterprise core exchanging BGP routes over redundant WAN paths, the governing mechanism is: BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing. It explains the reported symptom: A BGP neighbor uses an AS number above the two-byte range but older configuration assumes a 16-bit value. The intended response is: Configure the correct complete AS value on both peers using supported BGP capability negotiation. Verification: The BGP OPEN handshake succeeds with the full expected ASN.

Incorrect Answers

B:

Junos route filters distinguish exact matching from longer or longer-prefix patterns. This alternative mechanism does not match the current fault.

C:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Fixing that different mechanism would not address the current root cause: BGP supports 4-octet autonomous system numbering through compatible capabilities and AS processing.

D:

A nonadjacent eBGP neighbor may require a compatible multihop TTL and suitable route to the remote endpoint. Its verification is distinct from the reported condition: A BGP neighbor uses an AS number above the two-byte range but older configuration assumes a 16-bit value. The chosen route must have a valid data-plane next hop.

Question 238

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: An ASM receiver joins a group without selecting one specific sender but engineers search only (S,G) entries. The corrected tree must respect source and group authorization. What important rollout safeguard is most relevant here?

  1. Verify MSDP or supported PIM-based state synchronization according to the chosen anycast model.
  2. Check the RP mapping before assuming a source-specific join is mandatory for ASM.
  3. Do not interpret (*,G) shared-tree membership as proof that a particular source is forwarding.
  4. Verify unicast routing to the source or RP before expecting successful reverse-path checks.

Explanation

Correct Answer

B:

For a multimedia training network running Junos multicast routers, the relevant safeguard is: Check the RP mapping before assuming a source-specific join is mandatory for ASM. It matters while implementing: Verify receiver joins and the relevant shared-tree multicast state toward the RP. The fault involves: Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. The required acceptance result remains: The network reports expected (*,G) membership and delivers approved ASM traffic.

Incorrect Answers

A:

Anycast RP permits multiple rendezvous points to share one RP address with routing choosing a reachable instance. The appropriate correction for the reported case is: Check the RP mapping before assuming a source-specific join is mandatory for ASM.

C:

(S,G) multicast state identifies one particular source S and destination group G. Fixing that different mechanism would not address the current root cause: shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources.

D:

PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. Its verification is distinct from the reported condition: An ASM receiver joins a group without selecting one specific sender but engineers search only (S,G) entries. The corrected tree must respect source and group authorization.

Question 239

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. The network must keep critical application latency within policy. When would the described mechanism be appropriate?

  1. Use BA DSCP classification when trustworthy upstream packet markings exist.
  2. Use scheduler transmit rates to allocate egress bandwidth among traffic classes.
  3. Use multifield CoS classification when packet markings are absent or untrusted.
  4. Use packet-loss priority to differentiate discard behavior within forwarding treatment.

Explanation

Correct Answer

C:

For a congested enterprise WAN carrying video, voice and backups, this mechanism fits the requirement: Use multifield CoS classification when packet markings are absent or untrusted. The design is appropriate because: A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. In this scenario, the observed issue is: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. The corresponding implementation is: Create a narrowly matched classifier filter and apply it at the correct ingress logical interface.

Incorrect Answers

A:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. The appropriate correction for the reported case is: Create a narrowly matched classifier filter and apply it at the correct ingress logical interface.

B:

Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. Fixing that different mechanism would not address the current root cause: a multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class.

D:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. Its verification is distinct from the reported condition: Voice packets arrive without reliable DSCP markings but their source and application characteristics can be matched. The network must keep critical application latency within policy. When would the described mechanism be appropriate.

Question 240

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: OSPF automatically assigned metrics do not distinguish two high-speed interfaces at the intended precision. The correction must not expose administrative network prefixes. Which limitation should guide the change control?

  1. Verify both ends and vendor interoperability before changing interface type.
  2. Do not reset stable adjacencies merely because a non-DR neighbor is TwoWay on broadcast media.
  3. Avoid shortening dead timers without checking CPU load and adjacent platform support.
  4. Keep reference bandwidth consistent across routers to avoid asymmetric route decisions.

Explanation

Correct Answer

D:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Keep reference bandwidth consistent across routers to avoid asymmetric route decisions. It matters while implementing: Set a suitable reference bandwidth for automatic cost calculation on relevant OSPF speakers. The fault involves: OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain. The required acceptance result remains: show ospf interface reports costs appropriate to the configured link speeds.

Incorrect Answers

A:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. The appropriate correction for the reported case is: Keep reference bandwidth consistent across routers to avoid asymmetric route decisions.

B:

OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. Fixing that different mechanism would not address the current root cause: OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain.

C:

Neighbor compatibility depends on matching Hello and dead intervals for the participating link. Its verification is distinct from the reported condition: OSPF automatically assigned metrics do not distinguish two high-speed interfaces at the intended precision. The correction must not expose administrative network prefixes.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests