mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 23

Question 220

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The team should test joins and forwarding separately. What important rollout safeguard is most relevant here?

  1. Check the RP mapping before assuming a source-specific join is mandatory for ASM.
  2. Check querier and router-port discovery so memberships do not age out unexpectedly.
  3. Avoid running competing unsupported querier configurations without election planning.
  4. Do not assume PIM neighbor formation proves that hosts sent IGMP membership.

Explanation

Correct Answer

D:

For an enterprise telemetry network with multicast subscribers, the relevant safeguard is: Do not assume PIM neighbor formation proves that hosts sent IGMP membership. It matters while implementing: Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports. The fault involves: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. The required acceptance result remains: show igmp group lists the expected joined group and its receiving interface.

Incorrect Answers

A:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. The appropriate correction for the reported case is: Do not assume PIM neighbor formation proves that hosts sent IGMP membership.

B:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Fixing that different mechanism would not address the current root cause: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router.

C:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Its verification is distinct from the reported condition: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The team should test joins and forwarding separately.

Question 221

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: An ASM receiver joins G but routers disagree about the RP responsible for the group. The team should test joins and forwarding separately. For which use case is this feature the best match?

  1. Use a consistent RP mapping to support any-source multicast group discovery.
  2. Use PIM Register messages to introduce ASM sources to a rendezvous point.
  3. Use multicast scoping to contain group distribution within approved regions.
  4. Use PIM designated-router selection to coordinate multicast functions on shared links.

Explanation

Correct Answer

A:

For an enterprise telemetry network with multicast subscribers, this mechanism fits the requirement: Use a consistent RP mapping to support any-source multicast group discovery. The design is appropriate because: PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. In this scenario, the observed issue is: An ASM receiver joins G but routers disagree about the RP responsible for the group. The corresponding implementation is: Configure or correct the intended RP mapping for the affected group range throughout the domain.

Incorrect Answers

B:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. The appropriate correction for the reported case is: Configure or correct the intended RP mapping for the affected group range throughout the domain.

C:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. Fixing that different mechanism would not address the current root cause: PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs.

D:

PIM designated-router election selects the local router responsible for certain first-hop PIM functions. Its verification is distinct from the reported condition: An ASM receiver joins G but routers disagree about the RP responsible for the group. The team should test joins and forwarding separately.

Question 222

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: Traffic needs to use two genuinely equal-cost OSPF paths but only one forwarding next hop appears. The internal forwarding path must remain stable when one uplink fails. What is the most likely design-related cause?

  1. The link-state database and area LSA contents determine which routes the OSPF calculation can derive.
  2. OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior.
  3. Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.
  4. A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas.

Explanation

Correct Answer

B:

For a national enterprise designing OSPF between offices, the governing mechanism is: OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior. It explains the reported symptom: Traffic needs to use two genuinely equal-cost OSPF paths but only one forwarding next hop appears. The intended response is: Validate equal route metrics and supported forwarding next-hop installation for both eligible paths. Verification: The selected destination shows multiple eligible next hops and traffic load sharing is observable.

Incorrect Answers

A:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. This alternative mechanism does not match the current fault.

C:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. Fixing that different mechanism would not address the current root cause: OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior.

D:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Its verification is distinct from the reported condition: Traffic needs to use two genuinely equal-cost OSPF paths but only one forwarding next hop appears. The internal forwarding path must remain stable when one uplink fails.

Question 223

At a data-center access fabric using tagged trunks, a Junos specialist investigates this scenario: A redundant Layer 2 ring creates a broadcast storm when multiple paths forward simultaneously. The proposed behavior must be validated on actual switching ports. Which precaution should be checked before committing the change?

  1. Check all intermediary devices rather than changing only the ingress port.
  2. Preserve redundant root placement and test topology changes outside production peaks.
  3. Do not disable STP on an uncontrolled ring just to force all links forwarding.
  4. Check management and voice traffic before moving the physical switch port.

Explanation

Correct Answer

C:

For a data-center access fabric using tagged trunks, the relevant safeguard is: Do not disable STP on an uncontrolled ring just to force all links forwarding. It matters while implementing: Enable a consistent MSTP topology and verify the expected alternate-port state. The fault involves: Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. The required acceptance result remains: A loop-free topology has one blocked alternate path that activates after a controlled failure.

Incorrect Answers

A:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. The appropriate correction for the reported case is: Do not disable STP on an uncontrolled ring just to force all links forwarding.

B:

Spanning-tree root selection uses bridge identifiers and configured priorities within the relevant instance. Fixing that different mechanism would not address the current root cause: spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states.

D:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: A redundant Layer 2 ring creates a broadcast storm when multiple paths forward simultaneously. The proposed behavior must be validated on actual switching ports.

Question 224

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A BGP import policy changes but the operator wants to re-evaluate learned routes without tearing down a healthy peering. The routing policy must retain intended primary and backup paths. What is the most likely design-related cause?

  1. Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection.
  2. BGP community attributes carry policy tags that importing or exporting routers can match.
  3. Route reflector cluster identifiers participate in loop detection on reflected BGP paths.
  4. BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it.

Explanation

Correct Answer

D:

For a dual-homed business network peering with two upstream providers, the governing mechanism is: BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it. It explains the reported symptom: A BGP import policy changes but the operator wants to re-evaluate learned routes without tearing down a healthy peering. The intended response is: Request a supported inbound route refresh for the affected peer after validating the new policy. Verification: Accepted routes reflect the updated policy while the TCP/BGP session remains Established.

Incorrect Answers

A:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. This alternative mechanism does not match the current fault.

B:

BGP community attributes carry policy tags that importing or exporting routers can match. Fixing that different mechanism would not address the current root cause: BGP route refresh permits eligible peers to request readvertisement after policy changes when both support it.

C:

Route reflector cluster identifiers participate in loop detection on reflected BGP paths. Its verification is distinct from the reported condition: A BGP import policy changes but the operator wants to re-evaluate learned routes without tearing down a healthy peering. The routing policy must retain intended primary and backup paths.

Question 225

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A route is absent from the active table even though BGP packet counters show received updates. The routing policy must retain intended primary and backup paths. Which underlying distinction should guide troubleshooting?

  1. Hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection.
  2. A BGP prefix-limit control detects or constrains excessive received NLRI from a peer.
  3. Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection.
  4. BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support.

Explanation

Correct Answer

A:

For a dual-homed business network peering with two upstream providers, the governing mechanism is: Hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection. It explains the reported symptom: A route is absent from the active table even though BGP packet counters show received updates. The intended response is: Inspect show route hidden detail plus peer and policy diagnostics for the specific prefix. Verification: The reason for exclusion is identified and a corrected route becomes eligible without collateral changes.

Incorrect Answers

B:

A BGP prefix-limit control detects or constrains excessive received NLRI from a peer. This alternative mechanism does not match the current fault.

C:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection.

D:

BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. Its verification is distinct from the reported condition: A route is absent from the active table even though BGP packet counters show received updates. The routing policy must retain intended primary and backup paths.

Question 226

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: An OSPF-enabled router has a reachable interface but has no adjacency on that subnet. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which design objective is best served by this mechanism?

  1. Use OSPF ECMP for balanced forwarding across equivalent internal paths.
  2. Use explicit per-interface OSPF area membership to form an approved internal adjacency.
  3. Use area 0 as the backbone of a multi-area OSPF routing domain.
  4. Use OSPF point-to-point network type on an isolated two-router link.

Explanation

Correct Answer

B:

For a regional provider operating Junos-based branch routers, this mechanism fits the requirement: Use explicit per-interface OSPF area membership to form an approved internal adjacency. The design is appropriate because: OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. In this scenario, the observed issue is: An OSPF-enabled router has a reachable interface but has no adjacency on that subnet. The corresponding implementation is: Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.

Incorrect Answers

A:

OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior. The appropriate correction for the reported case is: Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.

C:

OSPF interarea routing normally relies on connectivity through area 0 and correctly placed area border routers. Fixing that different mechanism would not address the current root cause: OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.

D:

OSPF interface network type influences neighbor formation and whether DR and BDR election is used. Its verification is distinct from the reported condition: An OSPF-enabled router has a reachable interface but has no adjacency on that subnet. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 227

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: Two routers in the same enterprise AS exchange IP reachability but their intended iBGP session never establishes. The routing policy must retain intended primary and backup paths. What verification result should the engineer expect?

  1. An iBGP speaker selects the approved border after receiving otherwise comparable paths.
  2. The authorized peer establishes while a test using incorrect credentials is refused.
  3. show bgp summary identifies the internal peer in Established state.
  4. The neighbor establishes its TCP session and BGP state changes to Established.

Explanation

Correct Answer

C:

For a dual-homed business network peering with two upstream providers, the decisive evidence is: show BGP summary identifies the internal peer in Established state. This validates the action: Configure the approved internal BGP group with correct peer addresses and peer AS membership. Because: iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones. The appropriate correction for the reported case is: Configure the approved internal BGP group with correct peer addresses and peer AS membership.

B:

Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. Fixing that different mechanism would not address the current root cause: iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses.

D:

BGP depends on a reachable TCP transport path, normally using destination port 179. Its verification is distinct from the reported condition: Two routers in the same enterprise AS exchange IP reachability but their intended iBGP session never establishes. The routing policy must retain intended primary and backup paths.

Question 228

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: Users report poor application performance but staff rely solely on interface utilization and ignore per-queue drops. The improvement must not starve business traffic. For which use case is this feature the best match?

  1. Use 802.1p classification on trusted VLAN-tagged Ethernet traffic.
  2. Use BA DSCP classification when trustworthy upstream packet markings exist.
  3. Use configured drop profiles for controlled congestion management.
  4. Use per-queue statistics to diagnose CoS congestion rather than relying on aggregate utilization.

Explanation

Correct Answer

D:

For a campus switch team configuring Junos egress queues, this mechanism fits the requirement: Use per-queue statistics to diagnose CoS congestion rather than relying on aggregate utilization. The design is appropriate because: Per-queue counters reveal forwarding class use, transmission and discard behavior during congestion. In this scenario, the observed issue is: Users report poor application performance but staff rely solely on interface utilization and ignore per-queue drops. The corresponding implementation is: Inspect Junos interface queue statistics and correlate drops with traffic class and times.

Incorrect Answers

A:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. The appropriate correction for the reported case is: Inspect Junos interface queue statistics and correlate drops with traffic class and times.

B:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Fixing that different mechanism would not address the current root cause: per-queue counters reveal forwarding class use, transmission and discard behavior during congestion.

C:

A Junos drop profile can define queue occupancy thresholds and drop probabilities before absolute congestion. Its verification is distinct from the reported condition: Users report poor application performance but staff rely solely on interface utilization and ignore per-queue drops. The improvement must not starve business traffic.

Question 229

At a campus switch team configuring Junos egress queues, a Junos specialist investigates this scenario: A branch wants to smooth excess traffic over time but a policy immediately discards every burst above a fixed threshold. The improvement must not starve business traffic. What is the most likely design-related cause?

  1. Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit.
  2. A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class.
  3. IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification.
  4. The ingress trust boundary decides whether external markings should be accepted or reclassified.

Explanation

Correct Answer

A:

For a campus switch team configuring Junos egress queues, the governing mechanism is: Shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit. It explains the reported symptom: A branch wants to smooth excess traffic over time but a policy immediately discards every burst above a fixed threshold. The intended response is: Use appropriate egress shaping for the traffic that must be rate-smoothed instead of indiscriminate ingress policing. Verification: A burst is transmitted at a controlled rate without the same avoidable tail drops.

Incorrect Answers

B:

A multifield firewall filter can classify selected packets using header fields and set an appropriate forwarding class. This alternative mechanism does not match the current fault.

C:

IEEE 802.1p priority values in tagged Ethernet frames can drive behavior aggregate Layer 2 CoS classification. Fixing that different mechanism would not address the current root cause: shaping buffers excess eligible traffic to pace transmission whereas policing marks or drops traffic that exceeds a limit.

D:

The ingress trust boundary decides whether external markings should be accepted or reclassified. Its verification is distinct from the reported condition: A branch wants to smooth excess traffic over time but a policy immediately discards every burst above a fixed threshold. The improvement must not starve business traffic.

Question 230

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The diagnosis must distinguish a healthy BGP session from eligible received routes. What would demonstrate a successful correction under test?

  1. A policy test or advertised-route output confirms restricted prefixes are no longer accepted.
  2. show route protocol bgp reveals the selected path and its AS-path sequence.
  3. The upstream receives the appended path and a controlled test prefers the primary ingress.
  4. The cooperating neighbor selects the intended ingress for otherwise matching routes.

Explanation

Correct Answer

B:

For a managed network team troubleshooting an internet edge, the decisive evidence is: show route protocol BGP reveals the selected path and its AS-path sequence. This validates the action: Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified. Because: In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos policy terms are evaluated in configured order and a terminating action can end processing early. The appropriate correction for the reported case is: Inspect AS-path attributes and modify permitted policy only if a different transit choice is justified.

C:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. Fixing that different mechanism would not address the current root cause: In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie.

D:

BGP MED can signal a preferred ingress point to a neighboring AS subject to the neighbor's selection policy. Its verification is distinct from the reported condition: Two candidate BGP routes have equal local preference and differ primarily in the number of AS hops. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests