mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 22

Question 210

At a service provider offering isolated VXLAN services, a Junos specialist investigates this scenario: A multihomed VXLAN service receives duplicate flooded frames from two attached PEs. The engineer must verify both BGP EVPN signaling and underlay reachability. What is the most likely design-related cause?

  1. EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts.
  2. EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments.
  3. EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs.
  4. VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context.

Explanation

Correct Answer

B:

For a service provider offering isolated VXLAN services, the governing mechanism is: EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments. It explains the reported symptom: A multihomed VXLAN service receives duplicate flooded frames from two attached PEs. The intended response is: Verify the designated-forwarder election and associated multihoming mode for the affected VLAN or Ethernet tag. Verification: Only the expected DF forwards designated BUM traffic on the multihomed segment.

Incorrect Answers

A:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. This alternative mechanism does not match the current fault.

C:

EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Fixing that different mechanism would not address the current root cause: EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments.

D:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Its verification is distinct from the reported condition: A multihomed VXLAN service receives duplicate flooded frames from two attached PEs. The engineer must verify both BGP EVPN signaling and underlay reachability.

Question 211

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An OSPF connection on a shared segment must reject unauthorized routing speakers. The correction must not expose administrative network prefixes. Which precaution should be checked before committing the change?

  1. Check bidirectional traffic and backup capacity before adjusting link metrics.
  2. Verify translation and filtering so unwanted branch routes do not escape the area.
  3. Coordinate key rotation to avoid simultaneous loss of all redundant routing adjacencies.
  4. Coordinate identity changes because LSAs and neighbor databases can be rebuilt.

Explanation

Correct Answer

C:

For a healthcare organization connecting redundant facilities, the relevant safeguard is: Coordinate key rotation to avoid simultaneous loss of all redundant routing adjacencies. It matters while implementing: Enable a compatible supported authentication method and matching keys for both authorized peers. The fault involves: OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. The required acceptance result remains: Correctly configured peers form an adjacency and an invalid-key test is rejected.

Incorrect Answers

A:

OSPF shortest-path selection is driven by cumulative link metrics rather than a human label for preferred circuits. The appropriate correction for the reported case is: Coordinate key rotation to avoid simultaneous loss of all redundant routing adjacencies.

B:

A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. Fixing that different mechanism would not address the current root cause: OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.

D:

The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. Its verification is distinct from the reported condition: An OSPF connection on a shared segment must reject unauthorized routing speakers. The correction must not expose administrative network prefixes.

Question 212

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The service must preserve tags without bridging unrelated tenants. For which use case is this feature the best match?

  1. Use MVRP where authorized VLAN registration must propagate dynamically.
  2. Use BPDU protection on host access ports to prevent rogue Layer 2 bridges.
  3. Use MSTP to preserve redundancy without Layer 2 forwarding loops.
  4. Use L2PT to preserve customer Layer 2 control protocols across a service-provider tunnel.

Explanation

Correct Answer

D:

For a provider Ethernet network carrying customer Layer 2 services, this mechanism fits the requirement: Use L2PT to preserve customer Layer 2 control protocols across a service-provider tunnel. The design is appropriate because: Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. In this scenario, the observed issue is: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The corresponding implementation is: Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN.

Incorrect Answers

A:

Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. The appropriate correction for the reported case is: Enable the supported L2PT mechanism for the selected customer control protocol and service VLAN.

B:

BPDU protection can prevent an edge interface from accepting unauthorized bridge control messages. Fixing that different mechanism would not address the current root cause: layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain.

C:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Its verification is distinct from the reported condition: Customer spanning-tree BPDUs must traverse a provider Layer 2 network without controlling the provider's own spanning tree. The service must preserve tags without bridging unrelated tenants.

Question 213

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: A campus needs certain incoming traffic to enter a VLAN based on packet attributes rather than only the fixed physical port. The intended segmentation and loop prevention must remain intact. Which operational result would most clearly confirm the fix?

  1. Matching test traffic enters the designated VLAN while nonmatching traffic follows default handling.
  2. Two isolated test devices cannot communicate directly but each can reach the authorized gateway.
  3. show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet.
  4. A simulated BPDU loss creates a protected state without allowing a loop.

Explanation

Correct Answer

A:

For a campus network built with Juniper EX switches, the decisive evidence is: Matching test traffic enters the designated VLAN while nonmatching traffic follows default handling. This validates the action: Configure a supported Layer 2 firewall filter with the intended VLAN assignment action. Because: Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

B:

Private VLAN isolated ports restrict communication with peer isolated ports while allowing designated promiscuous connectivity. The appropriate correction for the reported case is: Configure a supported Layer 2 firewall filter with the intended VLAN assignment action.

C:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN.

D:

Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. Its verification is distinct from the reported condition: A campus needs certain incoming traffic to enter a VLAN based on packet attributes rather than only the fixed physical port. The intended segmentation and loop prevention must remain intact.

Question 214

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The corrected tree must respect source and group authorization. Which observation proves this requirement has been satisfied?

  1. The RP learns the source and joined downstream receivers begin receiving the stream.
  2. Only packets from the selected source reach receivers of that SSM group.
  3. The network reports expected (*,G) membership and delivers approved ASM traffic.
  4. show multicast route or PIM state contains the planned source-group combination.

Explanation

Correct Answer

B:

For a multimedia training network running Junos multicast routers, the decisive evidence is: Only packets from the selected source reach receivers of that SSM group. This validates the action: Use an approved SSM group and source-aware receiver membership with compatible PIM behavior. Because: Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

In PIM sparse-mode ASM, a first-hop designated router can register new source traffic with the RP. The appropriate correction for the reported case is: Use an approved SSM group and source-aware receiver membership with compatible PIM behavior.

C:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Fixing that different mechanism would not address the current root cause: source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: A receiver knows the multicast publisher IP but unnecessary RP dependencies delay traffic setup. The corrected tree must respect source and group authorization.

Question 215

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An external BGP peering repeatedly fails negotiation because the configured peer AS differs from the neighbor's actual AS. The diagnosis must distinguish a healthy BGP session from eligible received routes. What would demonstrate a successful correction under test?

  1. An iBGP speaker selects the approved border after receiving otherwise comparable paths.
  2. show route protocol bgp reveals the selected path and its AS-path sequence.
  3. show bgp neighbor reports Established with the expected external peer AS.
  4. The selected route has multiple eligible forwarding next hops and a traffic test uses both paths.

Explanation

Correct Answer

C:

For a managed network team troubleshooting an internet edge, the decisive evidence is: show BGP neighbor reports Established with the expected external peer AS. This validates the action: Correct the peer-as setting for the specific external BGP neighbor and recheck the session. Because: BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones. The appropriate correction for the reported case is: Correct the peer-as setting for the specific external BGP neighbor and recheck the session.

B:

In Junos BGP best-path selection an eligible shorter AS path is generally preferred after higher-priority criteria tie. Fixing that different mechanism would not address the current root cause: BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship.

D:

BGP multipath behavior is separate from ordinary best-path selection and requires compatible path attributes and support. Its verification is distinct from the reported condition: An external BGP peering repeatedly fails negotiation because the configured peer AS differs from the neighbor's actual AS. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 216

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: A virtual machine moves between leaf switches but stale remote MAC advertisements keep traffic on the old VTEP. The design must avoid forwarding loops during failover. What verification result should the engineer expect?

  1. A remote EVPN MAC table resolves the host to the expected originating VTEP.
  2. Both participating leaves advertise the same segment identity and remote EVPN state reflects multihoming.
  3. Only matching tenant MAC and prefix advertisements enter each isolated EVPN instance.
  4. Remote leaves update the affected MAC destination to the new VTEP after the controlled move.

Explanation

Correct Answer

D:

For a multihomed data center using redundant Ethernet segments, the decisive evidence is: Remote leaves update the affected MAC destination to the new VTEP after the controlled move. This validates the action: Verify advertisement and processing of the relevant MAC mobility extended community or sequence information. Because: EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. The appropriate correction for the reported case is: Verify advertisement and processing of the relevant MAC mobility extended community or sequence information.

B:

A common Ethernet Segment Identifier identifies the shared multihomed Ethernet segment for EVPN coordination. Fixing that different mechanism would not address the current root cause: EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location.

C:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. Its verification is distinct from the reported condition: A virtual machine moves between leaf switches but stale remote MAC advertisements keep traffic on the old VTEP. The design must avoid forwarding loops during failover.

Question 217

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The correction must not expose administrative network prefixes. What requirement most specifically calls for this approach?

  1. Use OSPFv3 export policy for approved external IPv6 reachability.
  2. Use OSPF ECMP for balanced forwarding across equivalent internal paths.
  3. Use OSPF ABR summary policy to control which interarea prefixes propagate.
  4. Use SPF diagnostics to identify repeated topology-triggered route recalculation.

Explanation

Correct Answer

A:

For a healthcare organization connecting redundant facilities, this mechanism fits the requirement: Use OSPFv3 export policy for approved external IPv6 reachability. The design is appropriate because: Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. In this scenario, the observed issue is: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The corresponding implementation is: Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process.

Incorrect Answers

B:

OSPF can compute equal-cost paths; forwarding utilization depends on installed next hops and platform ECMP behavior. The appropriate correction for the reported case is: Match the intended IPv6 static route in a scoped export policy under the OSPFv3 process.

C:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. Fixing that different mechanism would not address the current root cause: junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.

D:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. Its verification is distinct from the reported condition: An IPv6 static prefix is installed locally but not redistributed to the OSPFv3 domain. The correction must not expose administrative network prefixes.

Question 218

At a new office connecting VoIP phones to EX access switches, a Junos specialist investigates this scenario: A new IP phone requests a higher supported power class but is limited to a default allocation and fails to start. The rollout must support phones and connected workstations securely. When would the described mechanism be appropriate?

  1. Use LLDP to discover directly connected Ethernet neighbors.
  2. Use PoE classification to allocate suitable endpoint power safely.
  3. Use LLDP-MED to signal voice VLAN settings to compatible IP phones.
  4. Use PoE capacity planning when many phones draw power from one access switch.

Explanation

Correct Answer

B:

For a new office connecting VoIP phones to EX access switches, this mechanism fits the requirement: Use PoE classification to allocate suitable endpoint power safely. The design is appropriate because: PoE power classification informs the power source of the powered device's required allocation. In this scenario, the observed issue is: A new IP phone requests a higher supported power class but is limited to a default allocation and fails to start. The corresponding implementation is: Enable appropriate PoE class handling and compatible power negotiation for the phone.

Incorrect Answers

A:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. The appropriate correction for the reported case is: Enable appropriate PoE class handling and compatible power negotiation for the phone.

C:

LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. Fixing that different mechanism would not address the current root cause: poE power classification informs the power source of the powered device's required allocation.

D:

PoE availability depends on available switch power budget and each attached device's negotiated consumption. Its verification is distinct from the reported condition: A new IP phone requests a higher supported power class but is limited to a default allocation and fails to start. The rollout must support phones and connected workstations securely. When would the described mechanism be appropriate.

Question 219

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: A malfunctioning device saturates one VLAN with broadcasts and causes widespread host loss. The intended segmentation and loop prevention must remain intact. Which precaution should be checked before committing the change?

  1. Use only on appropriate port roles or legitimate topology changes may be disrupted.
  2. Validate interoperability with non-VSTP neighbors before splitting root placement.
  3. Avoid very low thresholds that block legitimate discovery bursts.
  4. Check management and voice traffic before moving the physical switch port.

Explanation

Correct Answer

C:

For a campus network built with Juniper EX switches, the relevant safeguard is: Avoid very low thresholds that block legitimate discovery bursts. It matters while implementing: Apply suitable storm-control thresholds to the affected edge ports. The fault involves: Layer 2 storm control limits specified excessive broadcast or multicast traffic on a port. The required acceptance result remains: A controlled burst is limited while ordinary ARP and discovery traffic remains functional.

Incorrect Answers

A:

Root protection can prevent a specified port from accepting an unexpected superior root advertisement. The appropriate correction for the reported case is: Avoid very low thresholds that block legitimate discovery bursts.

B:

VLAN Spanning Tree Protocol allows separate tree instances for selected VLANs and can choose different roots. Fixing that different mechanism would not address the current root cause: layer 2 storm control limits specified excessive broadcast or multicast traffic on a port.

D:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Its verification is distinct from the reported condition: A malfunctioning device saturates one VLAN with broadcasts and causes widespread host loss. The intended segmentation and loop prevention must remain intact.

Question 220

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The team should test joins and forwarding separately. What important rollout safeguard is most relevant here?

  1. Check the RP mapping before assuming a source-specific join is mandatory for ASM.
  2. Check querier and router-port discovery so memberships do not age out unexpectedly.
  3. Avoid running competing unsupported querier configurations without election planning.
  4. Do not assume PIM neighbor formation proves that hosts sent IGMP membership.

Explanation

Correct Answer

D:

For an enterprise telemetry network with multicast subscribers, the relevant safeguard is: Do not assume PIM neighbor formation proves that hosts sent IGMP membership. It matters while implementing: Enable appropriate IGMP processing on the receiver VLAN and validate group membership reports. The fault involves: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router. The required acceptance result remains: show igmp group lists the expected joined group and its receiving interface.

Incorrect Answers

A:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. The appropriate correction for the reported case is: Do not assume PIM neighbor formation proves that hosts sent IGMP membership.

B:

IGMP snooping lets a Layer 2 switch learn interested receiver ports and limit multicast flooding within a VLAN. Fixing that different mechanism would not address the current root cause: IGMP membership reports convey IPv4 receiver interest from hosts to their local multicast router.

C:

IGMP membership maintenance relies on periodic queries from a suitable multicast querier. Its verification is distinct from the reported condition: A router with a healthy PIM uplink cannot discover which attached IPv4 LAN users want a multicast group. The team should test joins and forwarding separately.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests