mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 14

Question 130

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The correction must not expose administrative network prefixes. What is the most likely design-related cause?

  1. OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.
  2. OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.
  3. OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments.
  4. The OSPF router ID uniquely identifies an originator of link-state information within the routing domain.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, the governing mechanism is: OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. It explains the reported symptom: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The intended response is: Validate the IPv6 link-local adjacency and correct outgoing logical interface for the route. Verification: An IPv6 destination installs with an expected link-local next hop and forwards successfully.

Incorrect Answers

A:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. This alternative mechanism does not match the current fault.

C:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Fixing that different mechanism would not address the current root cause: OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.

D:

The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. Its verification is distinct from the reported condition: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The correction must not expose administrative network prefixes.

Question 131

At a managed network team troubleshooting an internet edge, a Junos specialist investigates this scenario: An enterprise wants to protect a BGP session from a spoofed adjacent TCP peer. The diagnosis must distinguish a healthy BGP session from eligible received routes. What important rollout safeguard is most relevant here?

  1. Do not prepend sensitive internal ASNs indiscriminately or claim guaranteed internet-wide steering.
  2. Do not treat a neighbor's Established state as proof that its prefixes were accepted.
  3. Coordinate secret rotations to avoid synchronized loss of redundant sessions.
  4. Validate route reachability to the peer loopback before changing route policy.

Explanation

Correct Answer

C:

For a managed network team troubleshooting an internet edge, the relevant safeguard is: Coordinate secret rotations to avoid synchronized loss of redundant sessions. It matters while implementing: Enable matching supported BGP authentication keys on both sides and test staged replacement. The fault involves: Compatible TCP-level BGP authentication methods can verify the configured neighbor relationship. The required acceptance result remains: The authorized peer establishes while a test using incorrect credentials is refused.

Incorrect Answers

A:

AS-path prepending lengthens a path in selected outbound advertisements and may influence upstream BGP selection. The appropriate correction for the reported case is: Coordinate secret rotations to avoid synchronized loss of redundant sessions.

B:

Hidden and inactive BGP paths can result from next-hop resolution, policy rejection and competing path selection. Fixing that different mechanism would not address the current root cause: compatible TCP-level BGP authentication methods can verify the configured neighbor relationship.

D:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. Its verification is distinct from the reported condition: An enterprise wants to protect a BGP session from a spoofed adjacent TCP peer. The diagnosis must distinguish a healthy BGP session from eligible received routes.

Question 132

At a branch router serving several application classes, a Junos specialist investigates this scenario: A low-latency voice service waits behind large file transfers even when its traffic is correctly classified. The team must validate packet drops by actual queue statistics. What important rollout safeguard is most relevant here?

  1. Check percentages and priority interactions before promising absolute throughput for every burst.
  2. Do not trust unverified DSCP values from arbitrary user-controlled ports.
  3. Confirm platform feature support and monitor shaping delays for latency-sensitive traffic.
  4. Control priority traffic volume to avoid starving all other egress queues.

Explanation

Correct Answer

D:

For a branch router serving several application classes, the relevant safeguard is: Control priority traffic volume to avoid starving all other egress queues. It matters while implementing: Configure an appropriate constrained high-priority scheduler for the approved real-time class. The fault involves: A scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested. The required acceptance result remains: Voice queue delay remains within the target while lower classes still receive required service.

Incorrect Answers

A:

Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. The appropriate correction for the reported case is: Control priority traffic volume to avoid starving all other egress queues.

B:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. Fixing that different mechanism would not address the current root cause: a scheduler can prioritize selected latency-sensitive queues over other queues when the interface is congested.

C:

Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. Its verification is distinct from the reported condition: A low-latency voice service waits behind large file transfers even when its traffic is correctly classified. The team must validate packet drops by actual queue statistics.

Question 133

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: An OSPF stub area receives or expects external LSA behavior incompatible with its intended design. The correction must not expose administrative network prefixes. What is the most likely design-related cause?

  1. A conventional stub area limits external LSAs and uses a suitable default route for outside reachability.
  2. Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes.
  3. OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments.
  4. OSPF neighbors on a common link must agree on the area identifier used in Hello processing.

Explanation

Correct Answer

A:

For a healthcare organization connecting redundant facilities, the governing mechanism is: A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. It explains the reported symptom: An OSPF stub area receives or expects external LSA behavior incompatible with its intended design. The intended response is: Configure a compatible stub-area type throughout the area and validate ABR default behavior. Verification: Area routers learn a usable default route without inappropriate external LSAs.

Incorrect Answers

B:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. This alternative mechanism does not match the current fault.

C:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Fixing that different mechanism would not address the current root cause: a conventional stub area limits external LSAs and uses a suitable default route for outside reachability.

D:

OSPF neighbors on a common link must agree on the area identifier used in Hello processing. Its verification is distinct from the reported condition: An OSPF stub area receives or expects external LSA behavior incompatible with its intended design. The correction must not expose administrative network prefixes.

Question 134

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A static route is present in the local Junos routing table but other OSPF routers never learn it. The correction must not expose administrative network prefixes. Which operational result would most clearly confirm the fix?

  1. Other OSPFv3 routers learn the specified external IPv6 prefix without unrelated statics.
  2. show route protocol ospf on another router reveals the advertised external prefix.
  3. Branch routers receive a default route and reach the approved upstream network.
  4. An IPv6 destination installs with an expected link-local next hop and forwards successfully.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, the decisive evidence is: show route protocol ospf on another router reveals the advertised external prefix. This validates the action: Create a tightly scoped policy matching the intended static prefix and apply it as an OSPF export policy. Because: Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Junos requires a suitable route export policy to originate eligible non-OSPFv3 routes. The appropriate correction for the reported case is: Create a tightly scoped policy matching the intended static prefix and apply it as an OSPF export policy.

C:

A scoped OSPF default-route export can advertise 0.0.0.0/0 when the default is valid. Fixing that different mechanism would not address the current root cause: junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability.

D:

OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. Its verification is distinct from the reported condition: A static route is present in the local Junos routing table but other OSPF routers never learn it. The correction must not expose administrative network prefixes.

Question 135

At a university separating multiple OSPF areas, a Junos specialist investigates this scenario: OSPF automatically assigned metrics do not distinguish two high-speed interfaces at the intended precision. The routing change must preserve control-plane consistency across areas. What is the most appropriate correction to implement?

  1. Configure the same transit area and peer router identifiers at both virtual-link endpoints.
  2. Create a tightly scoped policy matching the intended static prefix and apply it as an OSPF export policy.
  3. Set a suitable reference bandwidth for automatic cost calculation on relevant OSPF speakers.
  4. Configure appropriate ABR area-range summarization with valid aggregate boundaries.

Explanation

Correct Answer

C:

For a university separating multiple OSPF areas, the direct corrective action is: Set a suitable reference bandwidth for automatic cost calculation on relevant OSPF speakers. This addresses the mechanism: OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain. Confirm by checking: show ospf interface reports costs appropriate to the configured link speeds. During rollout, keep reference bandwidth consistent across routers to avoid asymmetric route decisions.

Incorrect Answers

A:

A supported OSPF virtual link can logically extend the backbone through a nonstub transit area between eligible ABRs. The appropriate correction for the reported case is: Set a suitable reference bandwidth for automatic cost calculation on relevant OSPF speakers.

B:

Junos OSPF normally requires explicit export policy to redistribute eligible non-OSPF routes as external reachability. Fixing that different mechanism would not address the current root cause: OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain.

D:

An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. Its verification is distinct from the reported condition: OSPF automatically assigned metrics do not distinguish two high-speed interfaces at the intended precision. The routing change must preserve control-plane consistency across areas.

Question 136

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The change must retain both link resilience and correct VLAN isolation. Which observation proves this requirement has been satisfied?

  1. The aggregate reports active members and traffic survives loss of one constituent link.
  2. show ethernet-switching interfaces displays the assigned VLAN and test hosts reach only its subnet.
  3. Isolated and community hosts reach the shared gateway while tenant-to-tenant restrictions remain.
  4. A test superior BPDU is blocked and the authorized root stays unchanged.

Explanation

Correct Answer

D:

For a large enterprise updating redundant switch links, the decisive evidence is: A test superior BPDU is blocked and the authorized root stays unchanged. This validates the action: Configure supported spanning-tree root protection on the relevant downstream boundary. Because: Root protection can prevent a specified port from accepting an unexpected superior root advertisement. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

A link aggregation group presents multiple member links as one logical Ethernet interface when both peers agree. The appropriate correction for the reported case is: Configure supported spanning-tree root protection on the relevant downstream boundary.

B:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. Fixing that different mechanism would not address the current root cause: root protection can prevent a specified port from accepting an unexpected superior root advertisement.

C:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. Its verification is distinct from the reported condition: An unintended downstream switch claims a better spanning-tree root identifier than the designated distribution switch. The change must retain both link resilience and correct VLAN isolation.

Question 137

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The team must validate neighbor state rather than assume basic IP reachability proves routing. What is the most appropriate correction to implement?

  1. Configure supported OSPF passive behavior on the host-facing interface.
  2. Enable a compatible supported authentication method and matching keys for both authorized peers.
  3. Configure appropriate ABR area-range summarization with valid aggregate boundaries.
  4. Enable OSPF on the intended logical interface under the appropriate area and confirm its interface parameters.

Explanation

Correct Answer

A:

For a regional provider operating Junos-based branch routers, the direct corrective action is: Configure supported OSPF passive behavior on the host-facing interface. This addresses the mechanism: A passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos. Confirm by checking: The subnet is reachable from OSPF peers while no neighbor forms on the passive port. During rollout, check platform semantics and ensure transit interfaces are not made passive inadvertently.

Incorrect Answers

B:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. The appropriate correction for the reported case is: Configure supported OSPF passive behavior on the host-facing interface.

C:

An OSPF area border router can originate summarized interarea reachability when prefixes allow aggregation. Fixing that different mechanism would not address the current root cause: a passive OSPF interface can advertise attached reachability while suppressing neighbor-discovery Hellos.

D:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. Its verification is distinct from the reported condition: A connected LAN should be advertised as internal reachability without forming OSPF adjacencies with attached hosts. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 138

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The design must avoid forwarding loops during failover. Which response best restores the intended behavior?

  1. Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes.
  2. Provide sufficient underlay MTU for the intended inner payload or constrain end-host MTU safely.
  3. Align the intended VLAN-to-VNI mapping across participating leaf switches.
  4. Configure supported all-active Ethernet segment multihoming and consistent ESI state.

Explanation

Correct Answer

B:

For a multihomed data center using redundant Ethernet segments, the direct corrective action is: Provide sufficient underlay MTU for the intended inner payload or constrain end-host MTU safely. This addresses the mechanism: VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. Confirm by checking: A maximum-size approved test payload crosses the VXLAN tunnel without fragmentation-related failure. During rollout, check every underlay hop rather than changing only the leaf switch MTU.

Incorrect Answers

A:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. The appropriate correction for the reported case is: Provide sufficient underlay MTU for the intended inner payload or constrain end-host MTU safely.

C:

VXLAN uses a 24-bit VNI to identify a logical overlay segment associated with local bridging context. Fixing that different mechanism would not address the current root cause: VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames.

D:

EVPN all-active multihoming permits multiple PEs to forward eligible known-unicast traffic with appropriate control-plane loop prevention. Its verification is distinct from the reported condition: Small tenant packets traverse a VXLAN overlay but near-MTU application packets are dropped. The design must avoid forwarding loops during failover.

Question 139

At a live-event venue using routed multicast streaming, a Junos specialist investigates this scenario: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The change must preserve source identity and avoid multicast loops. What important rollout safeguard is most relevant here?

  1. Correlate RPF and PIM state before making indiscriminate VLAN flooding changes.
  2. Check the RP mapping before assuming a source-specific join is mandatory for ASM.
  3. Validate host and switch feature support before relying on source filtering.
  4. Do not interpret (*,G) shared-tree membership as proof that a particular source is forwarding.

Explanation

Correct Answer

C:

For a live-event venue using routed multicast streaming, the relevant safeguard is: Validate host and switch feature support before relying on source filtering. It matters while implementing: Enable supported IGMPv3 processing and make hosts join the approved source-group pair. The fault involves: IGMPv3 membership records can identify source filters that enable explicit SSM interest. The required acceptance result remains: show igmp group displays the intended source filter and unwanted senders do not reach the host.

Incorrect Answers

A:

Multicast forwarding depends on per-group and per-source route state in addition to host membership. The appropriate correction for the reported case is: Validate host and switch feature support before relying on source filtering.

B:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Fixing that different mechanism would not address the current root cause: IGMPv3 membership records can identify source filters that enable explicit SSM interest.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: Hosts need one multicast source in a group but IGMPv2 membership cannot express the chosen source. The change must preserve source identity and avoid multicast loops.

Question 140

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The overlay must relearn host reachability without stale tunnel selection. What is the most appropriate correction to implement?

  1. Enable a supported EVPN BGP signaling relationship with the intended route targets and instances.
  2. Set approved export and import route targets for each isolated tenant EVPN service.
  3. Verify the local MAC/IP advertisement and its acceptance through the correct EVPN instance.
  4. Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets.

Explanation

Correct Answer

D:

For an enterprise migrating virtual machines between racks, the direct corrective action is: Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets. This addresses the mechanism: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs. Confirm by checking: The remote IP-VRF learns the approved prefix with valid overlay next-hop resolution. During rollout, verify IRB and route-target configuration and avoid leaking unrelated tenant subnets.

Incorrect Answers

A:

EVPN uses a BGP signaling address family to distribute Ethernet reachability and related control-plane information. The appropriate correction for the reported case is: Advertise the intended IP prefixes through an eligible EVPN routing instance and import targets.

B:

EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. Fixing that different mechanism would not address the current root cause: EVPN route type 5 conveys IP prefix reachability and can support routed overlay designs.

C:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Its verification is distinct from the reported condition: An overlay needs to advertise routed IP subnet reachability without enumerating every individual host MAC. The overlay must relearn host reachability without stale tunnel selection.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests