mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 16

Question 150

At a medical facility deploying high-power conference phones, a Junos specialist investigates this scenario: A phone's integrated PC switch port works but the downstream computer never reaches the data VLAN. The phone network must retain appropriate VLAN and voice QoS treatment. For which use case is this feature the best match?

  1. Use LLDP to discover directly connected Ethernet neighbors.
  2. Use a dual-use access port to serve an IP phone plus an attached workstation.
  3. Use PoE classification to allocate suitable endpoint power safely.
  4. Use LLDP power negotiation for compatible phones with varying power requirements.

Explanation

Correct Answer

B:

For a medical facility deploying high-power conference phones, this mechanism fits the requirement: Use a dual-use access port to serve an IP phone plus an attached workstation. The design is appropriate because: An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior. In this scenario, the observed issue is: A phone's integrated PC switch port works but the downstream computer never reaches the data VLAN. The corresponding implementation is: Validate the phone passthrough configuration and Junos port VLAN membership for both traffic types.

Incorrect Answers

A:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. The appropriate correction for the reported case is: Validate the phone passthrough configuration and Junos port VLAN membership for both traffic types.

C:

PoE power classification informs the power source of the powered device's required allocation. Fixing that different mechanism would not address the current root cause: An Ethernet phone can bridge tagged voice traffic and untagged workstation traffic with appropriate VLAN behavior.

D:

Supported LLDP-MED or LLDP power TLVs can negotiate endpoint power requirements beyond static class assumptions. Its verification is distinct from the reported condition: A phone's integrated PC switch port works but the downstream computer never reaches the data VLAN. The phone network must retain appropriate VLAN and voice QoS treatment.

Question 151

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: OSPF adjacency troubleshooting reveals two different devices using the same router identifier. The internal forwarding path must remain stable when one uplink fails. For which use case is this feature the best match?

  1. Use SPF diagnostics to identify repeated topology-triggered route recalculation.
  2. Use a consistent OSPF reference bandwidth to distinguish modern link capacities.
  3. Assign unique router IDs to routers participating in the same OSPF routing domain.
  4. Use OSPF traceoptions for short targeted troubleshooting of protocol state transitions.

Explanation

Correct Answer

C:

For a national enterprise designing OSPF between offices, this mechanism fits the requirement: Assign unique router IDs to routers participating in the same OSPF routing domain. The design is appropriate because: The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. In this scenario, the observed issue is: OSPF adjacency troubleshooting reveals two different devices using the same router identifier. The corresponding implementation is: Configure distinct stable router IDs and restart or refresh affected protocol processes as supported.

Incorrect Answers

A:

Link-state SPF recalculation is triggered by topology changes and must converge over a coherent LSDB. The appropriate correction for the reported case is: Configure distinct stable router IDs and restart or refresh affected protocol processes as supported.

B:

OSPF automatic cost derives from reference bandwidth, which must be planned consistently in the domain. Fixing that different mechanism would not address the current root cause: the OSPF router ID uniquely identifies an originator of link-state information within the routing domain.

D:

Junos routing traceoptions can record protocol events for focused diagnosis when enabled carefully. Its verification is distinct from the reported condition: OSPF adjacency troubleshooting reveals two different devices using the same router identifier. The internal forwarding path must remain stable when one uplink fails.

Question 152

At a financial services network enforcing trusted DSCP markings, a Junos specialist investigates this scenario: Traffic is internally classified correctly but leaves the site with DSCP markings that an upstream provider does not recognize. Classification and downstream remarking must not be confused. Which technical mechanism most directly explains the symptom?

  1. A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority.
  2. Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets.
  3. The ingress trust boundary decides whether external markings should be accepted or reclassified.
  4. Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints.

Explanation

Correct Answer

D:

For a financial services network enforcing trusted DSCP markings, the governing mechanism is: Junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints. It explains the reported symptom: Traffic is internally classified correctly but leaves the site with DSCP markings that an upstream provider does not recognize. The intended response is: Apply a supported DSCP rewrite rule on the designated egress interface. Verification: Packet captures on egress show the agreed DSCP values for representative classes.

Incorrect Answers

A:

A behavior aggregate classifier maps incoming codepoint values to local forwarding class and loss priority. This alternative mechanism does not match the current fault.

B:

Classification determines internal forwarding class while rewrite rules modify markings on outgoing packets. Fixing that different mechanism would not address the current root cause: junos rewrite rules map internal forwarding class and loss-priority information to outgoing packet codepoints.

C:

The ingress trust boundary decides whether external markings should be accepted or reclassified. Its verification is distinct from the reported condition: Traffic is internally classified correctly but leaves the site with DSCP markings that an upstream provider does not recognize. Classification and downstream remarking must not be confused.

Question 153

At a Junos EVPN-VXLAN leaf-spine fabric, a Junos specialist investigates this scenario: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The tenant traffic must remain isolated across the overlay. What protocol behavior accounts for this failure?

  1. EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment.
  2. VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames.
  3. EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment.
  4. EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior.

Explanation

Correct Answer

A:

For a Junos EVPN-VXLAN leaf-spine fabric, the governing mechanism is: EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment. It explains the reported symptom: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The intended response is: Verify supported split-horizon or ESI label handling for the affected multihomed path. Verification: A loop test shows that frames from the segment are not reflected back through a peer attachment.

Incorrect Answers

B:

VXLAN adds outer Ethernet, IP, UDP and VXLAN encapsulation overhead to tenant frames. This alternative mechanism does not match the current fault.

C:

EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Fixing that different mechanism would not address the current root cause: EVPN multihoming split-horizon mechanisms prevent reflected traffic from looping across a common Ethernet segment.

D:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Its verification is distinct from the reported condition: Traffic received from one EVPN multihomed Ethernet segment is re-forwarded through another PE back into that same segment. The tenant traffic must remain isolated across the overlay.

Question 154

At a campus distributing IP video to several buildings, a Junos specialist investigates this scenario: Two multicast routers share a source LAN and operators cannot determine which device registers a new ASM source. The group traffic must reach interested receivers without flooding other locations. Which observation proves this requirement has been satisfied?

  1. An allowed test group crosses the boundary while a restricted group does not.
  2. The expected DR handles source registration and state transitions during controlled failover.
  3. show pim neighbors lists the expected adjacent router on the planned interface.
  4. show multicast route or PIM state contains the planned source-group combination.

Explanation

Correct Answer

B:

For a campus distributing IP video to several buildings, the decisive evidence is: The expected DR handles source registration and state transitions during controlled failover. This validates the action: Confirm neighbor priorities and configured DR role on the shared segment. Because: PIM designated-router election selects the local router responsible for certain first-hop PIM functions. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Multicast group and routing policies can limit which group ranges and sources cross specified boundaries. The appropriate correction for the reported case is: Confirm neighbor priorities and configured DR role on the shared segment.

C:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. Fixing that different mechanism would not address the current root cause: PIM designated-router election selects the local router responsible for certain first-hop PIM functions.

D:

(S,G) multicast state identifies one particular source S and destination group G. Its verification is distinct from the reported condition: Two multicast routers share a source LAN and operators cannot determine which device registers a new ASM source. The group traffic must reach interested receivers without flooding other locations.

Question 155

At a congested enterprise WAN carrying video, voice and backups, a Junos specialist investigates this scenario: Junos CoS classifiers and schedulers are configured but packets continue to use unexpected default queues. The network must keep critical application latency within policy. Which operational change most directly resolves the observed failure?

  1. Configure the supported shaper and subordinate scheduler policy according to the actual forwarding hierarchy.
  2. Assign appropriate scheduler transmit-rate settings for the required class and validate link capacity.
  3. Attach the intended scheduler map to the correct supported egress interface.
  4. Mark the appropriate lower-value traffic with a higher packet-loss priority through supported classification.

Explanation

Correct Answer

C:

For a congested enterprise WAN carrying video, voice and backups, the direct corrective action is: Attach the intended scheduler map to the correct supported egress interface. This addresses the mechanism: A scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior. Confirm by checking: Interface queue statistics reflect the configured scheduler allocation under test. During rollout, verify the actual output interface and aggregate hierarchy rather than binding a map to the wrong unit.

Incorrect Answers

A:

Hierarchical CoS policies coordinate parent traffic shaping with child class queues or scheduler allocation where supported. The appropriate correction for the reported case is: Attach the intended scheduler map to the correct supported egress interface.

B:

Junos schedulers control bandwidth allocation among queues using configured transmission rates and priorities. Fixing that different mechanism would not address the current root cause: a scheduler map must be associated with the appropriate interface for selected class-to-scheduler behavior.

D:

Junos packet-loss priority provides an additional attribute for drop-profile selection under queue pressure. Its verification is distinct from the reported condition: Junos CoS classifiers and schedulers are configured but packets continue to use unexpected default queues. The network must keep critical application latency within policy.

Question 156

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: Two route reflectors use inconsistent cluster settings and reflected path behavior differs after failover. The chosen route must have a valid data-plane next hop. Which configuration adjustment should be made first to address this issue?

  1. Correct the unintended AS-path manipulation or routing leak rather than disabling loop protection.
  2. Deploy supported route-reflector clusters and designate approved clients with appropriate topology.
  3. Enable advertise-inactive only for the intentional peer context and test its effect.
  4. Align the designed cluster identifier among redundant reflectors serving the same cluster.

Explanation

Correct Answer

D:

For an enterprise core exchanging BGP routes over redundant WAN paths, the direct corrective action is: Align the designed cluster identifier among redundant reflectors serving the same cluster. This addresses the mechanism: Route reflector cluster identifiers participate in loop detection on reflected BGP paths. Confirm by checking: Reflected routes contain expected cluster-list information and survive individual reflector failure. During rollout, do not reuse cluster identifiers carelessly across unrelated reflection domains.

Incorrect Answers

A:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. The appropriate correction for the reported case is: Align the designed cluster identifier among redundant reflectors serving the same cluster.

B:

Ordinary iBGP split-horizon rules avoid re-advertising routes between iBGP peers; route reflectors provide controlled reflection. Fixing that different mechanism would not address the current root cause: route reflector cluster identifiers participate in loop detection on reflected BGP paths.

C:

Junos normally exports active routes; supported advertise-inactive can announce an eligible inactive BGP route in some cases. Its verification is distinct from the reported condition: Two route reflectors use inconsistent cluster settings and reflected path behavior differs after failover. The chosen route must have a valid data-plane next hop.

Question 157

At an enterprise core exchanging BGP routes over redundant WAN paths, a Junos specialist investigates this scenario: A BGP neighbor is configured correctly but remains in Connect or Active state across a protected interconnect. The chosen route must have a valid data-plane next hop. Which response best restores the intended behavior?

  1. Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect.
  2. Enable the authorized inet6-unicast family consistently at relevant BGP group or peer scope.
  3. Configure the intended inet-unicast family on the authorized BGP peering.
  4. Set an intentional higher local preference on routes learned at the chosen ingress boundary.

Explanation

Correct Answer

A:

For an enterprise core exchanging BGP routes over redundant WAN paths, the direct corrective action is: Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect. This addresses the mechanism: BGP depends on a reachable TCP transport path, normally using destination port 179. Confirm by checking: The neighbor establishes its TCP session and BGP state changes to Established. During rollout, restrict BGP port access to approved neighbors rather than exposing it globally.

Incorrect Answers

B:

BGP address-family negotiation determines whether IPv6 unicast NLRI can be exchanged. The appropriate correction for the reported case is: Check source reachability and permit the specifically authorized BGP TCP flow across the interconnect.

C:

BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. Fixing that different mechanism would not address the current root cause: BGP depends on a reachable TCP transport path, normally using destination port 179.

D:

BGP LOCAL_PREF determines preferred exit within an AS; higher values generally win over lower ones. Its verification is distinct from the reported condition: A BGP neighbor is configured correctly but remains in Connect or Active state across a protected interconnect. The chosen route must have a valid data-plane next hop.

Question 158

At a campus network built with Juniper EX switches, a Junos specialist investigates this scenario: Two adjacent switches use MSTP but appear to occupy different regions despite a shared physical trunk. The intended segmentation and loop prevention must remain intact. What risk must the implementation avoid?

  1. Check MVRP support and trunk trust before propagating new VLANs across the network.
  2. Avoid partial region updates that temporarily create different spanning-tree domains.
  3. Check instance-to-VLAN mapping agreement across every switch in the region.
  4. Check all intermediary devices rather than changing only the ingress port.

Explanation

Correct Answer

B:

For a campus network built with Juniper EX switches, the relevant safeguard is: Avoid partial region updates that temporarily create different spanning-tree domains. It matters while implementing: Align the MSTP region attributes and intended VLAN mappings across the switches. The fault involves: MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest. The required acceptance result remains: Operational state shows common region information and expected instance boundaries.

Incorrect Answers

A:

Multiple VLAN Registration Protocol exchanges VLAN registration information between participating bridged devices. The appropriate correction for the reported case is: Avoid partial region updates that temporarily create different spanning-tree domains.

C:

Multiple Spanning Tree Protocol maps selected VLANs into common spanning-tree instances. Fixing that different mechanism would not address the current root cause: MSTP region membership depends on compatible region name, revision and VLAN-to-instance mapping digest.

D:

Adding an outer VLAN tag increases Ethernet frame size and may exceed an interface's supported MTU. Its verification is distinct from the reported condition: Two adjacent switches use MSTP but appear to occupy different regions despite a shared physical trunk. The intended segmentation and loop prevention must remain intact.

Question 159

At a national enterprise designing OSPF between offices, a Junos specialist investigates this scenario: A team treats a two-way neighbor state as a complete adjacency on every network type. The internal forwarding path must remain stable when one uplink fails. What would demonstrate a successful correction under test?

  1. show ospf database and downstream routes reflect only the approved summaries.
  2. The missing prefix is visible in an appropriate LSA and the downstream route becomes active.
  3. Expected transit adjacencies reach Full while eligible non-DR neighbors may remain TwoWay.
  4. show ospf neighbor shows the intended DR and BDR roles and stable adjacency states.

Explanation

Correct Answer

C:

For a national enterprise designing OSPF between offices, the decisive evidence is: Expected transit adjacencies reach Full while eligible non-DR neighbors may remain TwoWay. This validates the action: Read network type and DR/BDR election results when interpreting show ospf neighbor. Because: OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

OSPF interarea summary-LSA generation can be governed with supported routing policies on ABRs. The appropriate correction for the reported case is: Read network type and DR/BDR election results when interpreting show ospf neighbor.

B:

The link-state database and area LSA contents determine which routes the OSPF calculation can derive. Fixing that different mechanism would not address the current root cause: OSPF neighbor states depend on interface topology and DR roles; not every TwoWay relation becomes Full.

D:

On broadcast multiaccess networks OSPF elects a designated router and backup designated router to manage adjacencies. Its verification is distinct from the reported condition: A team treats a two-way neighbor state as a complete adjacency on every network type. The internal forwarding path must remain stable when one uplink fails.

Question 160

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The change must retain both link resilience and correct VLAN isolation. Which design objective is best served by this mechanism?

  1. Use Q-in-Q to transport customer VLAN tags through a provider Ethernet domain.
  2. Use a private VLAN promiscuous port to provide common gateway access.
  3. Use MSTP to preserve redundancy without Layer 2 forwarding loops.
  4. Use distinct Q-in-Q outer tags to isolate tenants with overlapping inner VLANs.

Explanation

Correct Answer

D:

For a large enterprise updating redundant switch links, this mechanism fits the requirement: Use distinct Q-in-Q outer tags to isolate tenants with overlapping inner VLANs. The design is appropriate because: A provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate. In this scenario, the observed issue is: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The corresponding implementation is: Assign distinct outer service VLAN identities to the independent customer services.

Incorrect Answers

A:

IEEE 802.1ad Q-in-Q encapsulates customer-tagged frames with an outer service VLAN tag. The appropriate correction for the reported case is: Assign distinct outer service VLAN identities to the independent customer services.

B:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. Fixing that different mechanism would not address the current root cause: a provider S-VLAN or equivalent encapsulation boundary is needed to keep identical customer C-VLAN numbers separate.

C:

Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. Its verification is distinct from the reported condition: Two customers using overlapping inner VLAN IDs communicate unexpectedly after a service-provider bridging change. The change must retain both link resilience and correct VLAN isolation.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests