mcAfee Secure Website
exam =5
exam =6

Exam Code: JN0-650

Exam Name: Enterprise Routing and Switching, Professional (JNCIP-ENT)

Certification Provider: Juniper

Corresponding Certification: JNCIP-ENT

Juniper JN0-650 Questions & Answers

Reliable & Actual Study Materials for JN0-650 Exam Success

107 Questions & Answers with Testing Engine

"JN0-650: Enterprise Routing and Switching, Professional (JNCIP-ENT)" Testing Engine covers all the knowledge points of the real Juniper JN0-650 exam.

The latest actual JN0-650 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at JN0-650 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Juniper Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Juniper JN0-650 Practice Test 13

Question 120

At a multimedia training network running Junos multicast routers, a Junos specialist investigates this scenario: An enterprise deploys IPv6 group delivery but attempts to identify receivers with ordinary IPv6 unicast addresses. The corrected tree must respect source and group authorization. When would the described mechanism be appropriate?

  1. Use IPv4 multicast addressing when a sender must distribute the same traffic to many receivers.
  2. Use a consistent RP mapping to support any-source multicast group discovery.
  3. Use (*,G) state when receiving any-source multicast through a shared tree.
  4. Use scoped IPv6 multicast addresses for one-to-many IPv6 applications.

Explanation

Correct Answer

D:

For a multimedia training network running Junos multicast routers, this mechanism fits the requirement: Use scoped IPv6 multicast addresses for one-to-many IPv6 applications. The design is appropriate because: IPv6 multicast destinations begin in the FF00::/8 range and include scope information. In this scenario, the observed issue is: An enterprise deploys IPv6 group delivery but attempts to identify receivers with ordinary IPv6 unicast addresses. The corresponding implementation is: Select a suitable IPv6 multicast group and scope for the approved application.

Incorrect Answers

A:

IPv4 multicast traffic uses group addresses from 224.0.0.0 through 239.255.255.255 rather than ordinary unicast host destinations. The appropriate correction for the reported case is: Select a suitable IPv6 multicast group and scope for the approved application.

B:

PIM-SM shared-tree construction depends on consistent mappings of multicast groups to suitable RPs. Fixing that different mechanism would not address the current root cause: IPv6 multicast destinations begin in the FF00::/8 range and include scope information.

C:

Shared-tree (*,G) state expresses interest in traffic to group G from potentially multiple sources. Its verification is distinct from the reported condition: An enterprise deploys IPv6 group delivery but attempts to identify receivers with ordinary IPv6 unicast addresses. The corrected tree must respect source and group authorization. When would the described mechanism be appropriate.

Question 121

At a multihomed data center using redundant Ethernet segments, a Junos specialist investigates this scenario: Multiple PEs attach to one Ethernet segment but cannot discover consistent peers for multihoming decisions. The design must avoid forwarding loops during failover. What is the most appropriate correction to implement?

  1. Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes.
  2. Select a supported single-active multihoming design and check ESI and DF behavior.
  3. Verify the designated-forwarder election and associated multihoming mode for the affected VLAN or Ethernet tag.
  4. Validate the Ethernet A-D advertisements and intended multihoming failover configuration.

Explanation

Correct Answer

A:

For a multihomed data center using redundant Ethernet segments, the direct corrective action is: Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes. This addresses the mechanism: EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment. Confirm by checking: Each PE sees its expected remote multihoming peers and a consistent segment identity. During rollout, avoid accidentally reusing an Ethernet segment identifier for unrelated customer attachments.

Incorrect Answers

B:

EVPN single-active multihoming restricts the forwarding role on an Ethernet segment to a selected active PE. The appropriate correction for the reported case is: Verify compatible Ethernet segment identifiers and advertisement of type-4 segment routes.

C:

EVPN DF election coordinates BUM forwarding responsibilities for applicable multihomed Ethernet segments. Fixing that different mechanism would not address the current root cause: EVPN Ethernet Segment route type 4 supports discovery of PEs connected to the same Ethernet segment.

D:

EVPN Ethernet Auto-Discovery route type 1 participates in multihoming reachability and mass-withdraw behavior. Its verification is distinct from the reported condition: Multiple PEs attach to one Ethernet segment but cannot discover consistent peers for multihoming decisions. The design must avoid forwarding loops during failover.

Question 122

At a provider Ethernet network carrying customer Layer 2 services, a Junos specialist investigates this scenario: A redundant Layer 2 ring creates a broadcast storm when multiple paths forward simultaneously. The service must preserve tags without bridging unrelated tenants. When would the described mechanism be appropriate?

  1. Use access VLAN assignment for a single untagged user segment.
  2. Use MSTP to preserve redundancy without Layer 2 forwarding loops.
  3. Use a private VLAN promiscuous port to provide common gateway access.
  4. Use loop protection where missing BPDUs could cause erroneous forwarding.

Explanation

Correct Answer

B:

For a provider Ethernet network carrying customer Layer 2 services, this mechanism fits the requirement: Use MSTP to preserve redundancy without Layer 2 forwarding loops. The design is appropriate because: Spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states. In this scenario, the observed issue is: A redundant Layer 2 ring creates a broadcast storm when multiple paths forward simultaneously. The corresponding implementation is: Enable a consistent MSTP topology and verify the expected alternate-port state.

Incorrect Answers

A:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. The appropriate correction for the reported case is: Enable a consistent MSTP topology and verify the expected alternate-port state.

C:

Private VLAN promiscuous ports can communicate with applicable secondary VLAN ports, providing a shared exit. Fixing that different mechanism would not address the current root cause: spanning tree prevents bridging loops by keeping appropriate redundant ports in nondesignated states.

D:

Loop protection helps guard against unsafe port state changes when expected spanning-tree BPDUs disappear. Its verification is distinct from the reported condition: A redundant Layer 2 ring creates a broadcast storm when multiple paths forward simultaneously. The service must preserve tags without bridging unrelated tenants. When would the described mechanism be appropriate.

Question 123

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: A control-plane restart triggers avoidable route withdrawal despite forwarding continuing on a capable BGP neighbor. The routing policy must retain intended primary and backup paths. What protocol behavior accounts for this failure?

  1. BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system.
  2. A BGP import policy determines which incoming route advertisements are accepted into the routing table.
  3. BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions.
  4. BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship.

Explanation

Correct Answer

C:

For a dual-homed business network peering with two upstream providers, the governing mechanism is: BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions. It explains the reported symptom: A control-plane restart triggers avoidable route withdrawal despite forwarding continuing on a capable BGP neighbor. The intended response is: Configure compatible graceful-restart behavior and timers across designated peers. Verification: A controlled restart retains eligible forwarding for the negotiated grace interval and recovers correctly.

Incorrect Answers

A:

BGP AS-path loop detection normally prevents accepting routes already traversing the local autonomous system. This alternative mechanism does not match the current fault.

B:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. Fixing that different mechanism would not address the current root cause: BGP graceful restart can preserve selected forwarding state during brief compatible control-plane interruptions.

D:

BGP OPEN messages carry AS information and external peers must agree on their intended local and remote AS relationship. Its verification is distinct from the reported condition: A control-plane restart triggers avoidable route withdrawal despite forwarding continuing on a capable BGP neighbor. The routing policy must retain intended primary and backup paths.

Question 124

At an enterprise migrating virtual machines between racks, a Junos specialist investigates this scenario: A tenant's EVPN route appears in another tenant's MAC table despite separate VLAN names. The overlay must relearn host reachability without stale tunnel selection. Which operational result would most clearly confirm the fix?

  1. A test VXLAN packet reaches the remote VTEP with successful decapsulation and host delivery.
  2. Remote leaves update the affected MAC destination to the new VTEP after the controlled move.
  3. A remote EVPN MAC table resolves the host to the expected originating VTEP.
  4. Only matching tenant MAC and prefix advertisements enter each isolated EVPN instance.

Explanation

Correct Answer

D:

For an enterprise migrating virtual machines between racks, the decisive evidence is: Only matching tenant MAC and prefix advertisements enter each isolated EVPN instance. This validates the action: Set approved export and import route targets for each isolated tenant EVPN service. Because: EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

VXLAN tunnels require IP reachability between VTEP addresses and adequate underlay transport capacity. The appropriate correction for the reported case is: Set approved export and import route targets for each isolated tenant EVPN service.

B:

EVPN MAC mobility information can signal updated reachability and help distinguish a newer MAC location. Fixing that different mechanism would not address the current root cause: EVPN route targets determine which routes are imported into the relevant EVPN instances and tenant contexts.

C:

EVPN route type 2 advertises MAC reachability and can include associated IP information for hosts. Its verification is distinct from the reported condition: A tenant's EVPN route appears in another tenant's MAC table despite separate VLAN names. The overlay must relearn host reachability without stale tunnel selection.

Question 125

At a regional provider operating Junos-based branch routers, a Junos specialist investigates this scenario: A branch area needs to redistribute local prefixes but must still avoid full external LSA flooding. The team must validate neighbor state rather than assume basic IP reachability proves routing. Which technical mechanism most directly explains the symptom?

  1. A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas.
  2. A conventional stub area limits external LSAs and uses a suitable default route for outside reachability.
  3. OSPF protocol authentication checks configured credentials for applicable neighbor exchanges.
  4. The OSPF router ID uniquely identifies an originator of link-state information within the routing domain.

Explanation

Correct Answer

A:

For a regional provider operating Junos-based branch routers, the governing mechanism is: A not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas. It explains the reported symptom: A branch area needs to redistribute local prefixes but must still avoid full external LSA flooding. The intended response is: Configure a consistent NSSA area and permitted redistribution at the branch ASBR. Verification: The local type-7 advertisement appears and translated external reachability is available outside the NSSA.

Incorrect Answers

B:

A conventional stub area limits external LSAs and uses a suitable default route for outside reachability. This alternative mechanism does not match the current fault.

C:

OSPF protocol authentication checks configured credentials for applicable neighbor exchanges. Fixing that different mechanism would not address the current root cause: a not-so-stubby area allows local external routes using type-7 LSAs and an ABR can translate them toward other areas.

D:

The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. Its verification is distinct from the reported condition: A branch area needs to redistribute local prefixes but must still avoid full external LSA flooding. The team must validate neighbor state rather than assume basic IP reachability proves routing.

Question 126

At a medical facility deploying high-power conference phones, a Junos specialist investigates this scenario: A newly connected desk phone remains in the data VLAN although the switch has a dedicated tagged voice VLAN. The phone network must retain appropriate VLAN and voice QoS treatment. Which observation proves this requirement has been satisfied?

  1. show lldp neighbors identifies the intended adjacent device and receiving port.
  2. The phone adopts the approved voice VLAN tag and registers using the expected voice network.
  3. Voice traffic uses the approved tagged VLAN while the PC remains in the data VLAN.
  4. Phone packets receive intended priority during congestion and desktop traffic cannot impersonate it.

Explanation

Correct Answer

B:

For a medical facility deploying high-power conference phones, the decisive evidence is: The phone adopts the approved voice VLAN tag and registers using the expected voice network. This validates the action: Publish the intended LLDP-MED voice network policy on the switch access port. Because: LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones. An unrelated successful test would not prove this specific issue is resolved.

Incorrect Answers

A:

Link Layer Discovery Protocol advertises local chassis and port information to directly attached compatible devices. The appropriate correction for the reported case is: Publish the intended LLDP-MED voice network policy on the switch access port.

C:

A voice VLAN permits supported tagged phone traffic to use a separate VLAN from ordinary untagged data traffic. Fixing that different mechanism would not address the current root cause: LLDP-MED network policy information can advertise voice VLAN and QoS settings to compatible phones.

D:

Voice VLAN tagging and QoS classification must be mapped to the correct switch forwarding treatment. Its verification is distinct from the reported condition: A newly connected desk phone remains in the data VLAN although the switch has a dedicated tagged voice VLAN. The phone network must retain appropriate VLAN and voice QoS treatment.

Question 127

At a large enterprise updating redundant switch links, a Junos specialist investigates this scenario: A campus needs certain incoming traffic to enter a VLAN based on packet attributes rather than only the fixed physical port. The change must retain both link resilience and correct VLAN isolation. Which design objective is best served by this mechanism?

  1. Use access VLAN assignment for a single untagged user segment.
  2. Use private VLAN communities for grouped same-subnet connectivity.
  3. Use filter-based VLAN classification when traffic attributes determine VLAN placement.
  4. Use L2PT to preserve customer Layer 2 control protocols across a service-provider tunnel.

Explanation

Correct Answer

C:

For a large enterprise updating redundant switch links, this mechanism fits the requirement: Use filter-based VLAN classification when traffic attributes determine VLAN placement. The design is appropriate because: Filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN. In this scenario, the observed issue is: A campus needs certain incoming traffic to enter a VLAN based on packet attributes rather than only the fixed physical port. The corresponding implementation is: Configure a supported Layer 2 firewall filter with the intended VLAN assignment action.

Incorrect Answers

A:

An untagged Ethernet access port places endpoint traffic into its configured access VLAN. The appropriate correction for the reported case is: Configure a supported Layer 2 firewall filter with the intended VLAN assignment action.

B:

Private VLAN community ports support intra-community traffic while preventing communication with other communities. Fixing that different mechanism would not address the current root cause: filter-based VLANs can classify ingress frames and assign eligible traffic to a selected VLAN.

D:

Layer 2 protocol tunneling can transport specified customer control frames across a separate provider bridging domain. Its verification is distinct from the reported condition: A campus needs certain incoming traffic to enter a VLAN based on packet attributes rather than only the fixed physical port. The change must retain both link resilience and correct VLAN isolation.

Question 128

At an enterprise telemetry network with multicast subscribers, a Junos specialist investigates this scenario: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The team should test joins and forwarding separately. Which limitation should guide the change control?

  1. Consider unwanted sources and multicast boundary controls in an open ASM group.
  2. Avoid enabling PIM on unrelated edge ports or firewall zones by default.
  3. Check IGMPv3 support and SSM address-range policy before switching away from ASM.
  4. Verify unicast routing to the source or RP before expecting successful reverse-path checks.

Explanation

Correct Answer

D:

For an enterprise telemetry network with multicast subscribers, the relevant safeguard is: Verify unicast routing to the source or RP before expecting successful reverse-path checks. It matters while implementing: Enable compatible sparse-mode PIM and verify receiver-driven upstream join signaling. The fault involves: PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere. The required acceptance result remains: show pim join reports an expected entry and packets follow the joined multicast branch.

Incorrect Answers

A:

Any-source multicast allows receivers to request a group independent of a specific source, typically using a shared-tree mechanism. The appropriate correction for the reported case is: Verify unicast routing to the source or RP before expecting successful reverse-path checks.

B:

PIM routers discover routing neighbors on participating interfaces through PIM Hello exchanges. Fixing that different mechanism would not address the current root cause: PIM sparse mode builds multicast forwarding paths in response to explicit joins rather than flooding everywhere.

C:

Source-specific multicast uses explicit (S,G) interests and does not require an ASM rendezvous point. Its verification is distinct from the reported condition: An upstream multicast router receives no distribution request even though a downstream receiver requires the stream. The team should test joins and forwarding separately.

Question 129

At a dual-homed business network peering with two upstream providers, a Junos specialist investigates this scenario: An upstream BGP neighbor must recognize which advertised prefixes belong to a special handling category. The routing policy must retain intended primary and backup paths. Which technical mechanism most directly explains the symptom?

  1. BGP community attributes carry policy tags that importing or exporting routers can match.
  2. iBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses.
  3. A BGP import policy determines which incoming route advertisements are accepted into the routing table.
  4. BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes.

Explanation

Correct Answer

A:

For a dual-homed business network peering with two upstream providers, the governing mechanism is: BGP community attributes carry policy tags that importing or exporting routers can match. It explains the reported symptom: An upstream BGP neighbor must recognize which advertised prefixes belong to a special handling category. The intended response is: Attach a defined community to only the selected prefixes and configure matching remote policy. Verification: show route extensive or advertised-route output includes the expected community on the intended prefixes.

Incorrect Answers

B:

IBGP requires compatible local and remote AS settings, TCP reachability and correct neighbor addresses. This alternative mechanism does not match the current fault.

C:

A BGP import policy determines which incoming route advertisements are accepted into the routing table. Fixing that different mechanism would not address the current root cause: BGP community attributes carry policy tags that importing or exporting routers can match.

D:

BGP NLRI family selection must include inet-unicast for eligible IPv4 unicast prefixes. Its verification is distinct from the reported condition: An upstream BGP neighbor must recognize which advertised prefixes belong to a special handling category. The routing policy must retain intended primary and backup paths.

Question 130

At a healthcare organization connecting redundant facilities, a Junos specialist investigates this scenario: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The correction must not expose administrative network prefixes. What is the most likely design-related cause?

  1. OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area.
  2. OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.
  3. OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments.
  4. The OSPF router ID uniquely identifies an originator of link-state information within the routing domain.

Explanation

Correct Answer

B:

For a healthcare organization connecting redundant facilities, the governing mechanism is: OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link. It explains the reported symptom: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The intended response is: Validate the IPv6 link-local adjacency and correct outgoing logical interface for the route. Verification: An IPv6 destination installs with an expected link-local next hop and forwards successfully.

Incorrect Answers

A:

OSPF neighbor discovery requires the relevant logical interface to participate in the correct routing instance and area. This alternative mechanism does not match the current fault.

C:

OSPFv3 is a distinct link-state protocol requiring correct interface and area enablement for IPv6 environments. Fixing that different mechanism would not address the current root cause: OSPFv3 neighbor exchanges and next-hop forwarding commonly use IPv6 link-local addresses on the adjoining link.

D:

The OSPF router ID uniquely identifies an originator of link-state information within the routing domain. Its verification is distinct from the reported condition: A team expects an IPv6 OSPFv3 next hop to appear only as a global unicast address. The correction must not expose administrative network prefixes.

Enterprise Routing and Switching, Professional (JNCIP-ENT) (JN0-650) Practice Tests