mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 45

Question 440

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that multiple tenant subnets must communicate but unrelated tenants must remain isolated. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Bridge all tenants into the same MAC-VRF to make routes unnecessary.
  2. Replace EVPN routing with logging-only policies.
  3. Share a single unrestricted default route table among customers.
  4. Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service.

Explanation

Correct Answer

D:

Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. The option uses “Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service” to address “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. The result must be observed on the affected component. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Bridge all tenants into the same MAC-VRF to make routes unnecessary” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Replace EVPN routing with logging-only policies” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Share a single unrestricted default route table among customers” targets a different operation from the reported requirement: “multiple tenant subnets must communicate but unrelated tenants must remain isolated”. Tenant-specific L3 EVPN separates inter-subnet routing from cross-customer leakage. Use the appropriate method: Use tenant-specific IP-VRF routing with the intended L3 EVPN overlay service. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 441

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that the overlay needs to advertise IP routing reachability beyond individual MAC entries. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use appropriate EVPN Type 5 IP prefix advertisements.
  2. Treat an interface ACL entry as an EVPN IP route.
  3. Use only Type 3 membership routes to represent all routed prefixes.
  4. Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement.

Explanation

Correct Answer

A:

IP prefix routes advertise Layer 3 destination reachability within EVPN. The option uses “Use appropriate EVPN Type 5 IP prefix advertisements” to address “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Treat an interface ACL entry as an EVPN IP route” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Before onboarding, test that the intended fabric state exists.

C:

“Use only Type 3 membership routes to represent all routed prefixes” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Before onboarding, test that the intended fabric state exists.

D:

“Assign a MAC-VRF bridge flood-list in place of an L3 prefix advertisement” targets a different operation from the reported requirement: “the overlay needs to advertise IP routing reachability beyond individual MAC entries”. IP prefix routes advertise Layer 3 destination reachability within EVPN. Use the appropriate method: Use appropriate EVPN Type 5 IP prefix advertisements. Before onboarding, test that the intended fabric state exists.

Question 442

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that a route is present but only one of several equal-cost paths is actually eligible. Which engineering action best satisfies this request?

  1. Change a VLAN name to rebalance layer 3 forwarding.
  2. Inspect installed route and next-hop eligibility before changing link policy.
  3. Assume BGP established state guarantees that every path is in ECMP.
  4. Modify a tenant ACL without checking next-hop selection.

Explanation

Correct Answer

B:

Only installed eligible equal-cost next hops can participate in forwarding. For Pine-9, confirm the actual outcome: the route has the expected eligible next-hop set in forwarding state.

Incorrect Answers

A:

“Change a VLAN name to rebalance layer 3 forwarding” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy. Confirm that the replacement leaf reaches the expected operational state.

C:

“Assume BGP established state guarantees that every path is in ECMP” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy. Confirm that the replacement leaf reaches the expected operational state.

D:

“Modify a tenant ACL without checking next-hop selection” targets a different operation from the reported requirement: “a route is present but only one of several equal-cost paths is actually eligible”. Only installed eligible equal-cost next hops can participate in forwarding. Use the appropriate method: Inspect installed route and next-hop eligibility before changing link policy. Confirm that the replacement leaf reaches the expected operational state.

Question 443

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that a risky change requires a reliable return point. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Rely on a single CLI screenshot as an automatic rollback.
  2. Change random route preferences to force recovery.
  3. Take and retain a configuration checkpoint before applying the change.
  4. Delete all prior configuration history before testing.

Explanation

Correct Answer

C:

A checkpoint provides an explicit configuration reference for controlled rollback. For Summit-4, confirm the actual outcome: the recorded checkpoint is available and maps to the intended prechange state.

Incorrect Answers

A:

“Rely on a single CLI screenshot as an automatic rollback” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change.

B:

“Change random route preferences to force recovery” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change.

D:

“Delete all prior configuration history before testing” targets a different operation from the reported requirement: “a risky change requires a reliable return point”. A checkpoint provides an explicit configuration reference for controlled rollback. Use the appropriate method: Take and retain a configuration checkpoint before applying the change.

Question 444

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that an EVPN segment needs remote membership discovery for broadcast and unknown traffic. Which engineering action best satisfies this request?

  1. Disable VXLAN on the remote nodes to discover flood members.
  2. Use Type 5 prefixes alone as broadcast membership advertisement.
  3. Use a JSON-RPC TLS profile as the overlay membership signal.
  4. Check the EVPN Type 3 inclusive multicast Ethernet tag signaling.

Explanation

Correct Answer

D:

Inclusive multicast routes help identify remote members for segment-wide traffic handling. For Ridge-2, confirm the actual outcome: the tenant EVPN instance shows expected participating remote VTEPs.

Incorrect Answers

A:

“Disable VXLAN on the remote nodes to discover flood members” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. Use the appropriate method: Check the EVPN Type 3 inclusive multicast Ethernet tag signaling.

B:

“Use Type 5 prefixes alone as broadcast membership advertisement” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. Use the appropriate method: Check the EVPN Type 3 inclusive multicast Ethernet tag signaling.

C:

“Use a JSON-RPC TLS profile as the overlay membership signal” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. Use the appropriate method: Check the EVPN Type 3 inclusive multicast Ethernet tag signaling.

Question 445

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a management client needs a structured request-response configuration interface. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use the supported SR Linux JSON-RPC management interface.
  2. Poll an unrelated time server for router configuration state.
  3. Send an Ethernet broadcast as a configuration API request.
  4. Edit platform binaries directly to change configuration.

Explanation

Correct Answer

A:

JSON-RPC offers a structured management access method instead of screen scraping. For Pine-9, confirm the actual outcome: a correctly authorized JSON-RPC request returns the expected modeled response.

Incorrect Answers

B:

“Poll an unrelated time server for router configuration state” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface. Confirm that the replacement leaf reaches the expected operational state.

C:

“Send an Ethernet broadcast as a configuration API request” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface. Confirm that the replacement leaf reaches the expected operational state.

D:

“Edit platform binaries directly to change configuration” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface. Confirm that the replacement leaf reaches the expected operational state.

Question 446

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that traffic must route between tenant subnets while maintaining VRF isolation across VTEPs. The planned change is "Use a correctly designed symmetric IRB L3 EVPN routing model." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that inter-subnet flows follow intended IP-VRF routing and VTEP endpoints.
  3. Use an unrelated tenant dashboard as proof, without verifying the required symmetric inter-subnet forwarding condition.
  4. Check only that the device hostname is listed in the inventory, without examining symmetric inter-subnet forwarding behavior.

Explanation

Correct Answer

B:

Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. The option uses “Verify that inter-subnet flows follow intended IP-VRF routing and VTEP endpoints” to address “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. The acceptance test is: inter-subnet flows follow intended IP-VRF routing and VTEP endpoints.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. The confirming result is: inter-subnet flows follow intended IP-VRF routing and VTEP endpoints.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required symmetric inter-subnet forwarding condition” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. The confirming result is: inter-subnet flows follow intended IP-VRF routing and VTEP endpoints.

D:

“Check only that the device hostname is listed in the inventory, without examining symmetric inter-subnet forwarding behavior” targets a different operation from the reported requirement: “traffic must route between tenant subnets while maintaining VRF isolation across VTEPs”. Symmetric IRB uses distributed tenant routing constructs to support inter-subnet traffic over the overlay. The confirming result is: inter-subnet flows follow intended IP-VRF routing and VTEP endpoints.

Question 447

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that an on-call engineer needs a compact human-readable comparison of many interfaces. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Force binary packet capture as the only display format.
  2. Export full model trees when a focused overview is needed.
  3. Use the CLI table presentation where supported.
  4. Disable interface statistics to shorten every command.

Explanation

Correct Answer

C:

Table presentation makes repeated fields easier to compare interactively. For Delta-6, confirm the actual outcome: the displayed table contains the intended interfaces and columns.

Incorrect Answers

A:

“Force binary packet capture as the only display format” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

B:

“Export full model trees when a focused overview is needed” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

D:

“Disable interface statistics to shorten every command” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

Question 448

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that an EVPN segment needs remote membership discovery for broadcast and unknown traffic. The planned change is "Check the EVPN Type 3 inclusive multicast Ethernet tag signaling." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required evpn inclusive multicast condition.
  2. Check only that the device hostname is listed in the inventory, without examining evpn inclusive multicast behavior.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that the tenant EVPN instance shows expected participating remote VTEPs.

Explanation

Correct Answer

D:

Inclusive multicast routes help identify remote members for segment-wide traffic handling. The option uses “Verify that the tenant EVPN instance shows expected participating remote VTEPs” to address “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. The acceptance test is: the tenant EVPN instance shows expected participating remote VTEPs.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required evpn inclusive multicast condition” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. The confirming result is: the tenant EVPN instance shows expected participating remote VTEPs.

B:

“Check only that the device hostname is listed in the inventory, without examining evpn inclusive multicast behavior” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. The confirming result is: the tenant EVPN instance shows expected participating remote VTEPs.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “an EVPN segment needs remote membership discovery for broadcast and unknown traffic”. Inclusive multicast routes help identify remote members for segment-wide traffic handling. The confirming result is: the tenant EVPN instance shows expected participating remote VTEPs.

Question 449

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that an operator needs live interface operational data rather than only intended settings. Which engineering action best satisfies this request?

  1. Inspect the operational state datastore or state-oriented CLI view.
  2. Read only the saved configuration and assume it proves link status.
  3. Replace the interface with a loopback to create an up indicator.
  4. Check only user role names to determine physical link health.

Explanation

Correct Answer

A:

Operational state exposes what the system reports now rather than merely requested configuration. For Ridge-2, confirm the actual outcome: the relevant state paths show current link and counter values.

Incorrect Answers

B:

“Read only the saved configuration and assume it proves link status” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view.

C:

“Replace the interface with a loopback to create an up indicator” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view.

D:

“Check only user role names to determine physical link health” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. Use the appropriate method: Inspect the operational state datastore or state-oriented CLI view.

Question 450

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a manually configured destination prefix has no usable forwarding adjacency. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Change the device hostname to match the prefix.
  2. Reference an appropriate reachable next-hop group for the static route.
  3. Use a MAC move event as a static route next hop.
  4. Record the route only in syslog without installing it.

Explanation

Correct Answer

B:

A static route needs a viable forwarding disposition or next-hop resolution. For Delta-6, confirm the actual outcome: the static prefix is installed with a valid resolved forwarding next hop.

Incorrect Answers

A:

“Change the device hostname to match the prefix” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

C:

“Use a MAC move event as a static route next hop” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

D:

“Record the route only in syslog without installing it” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests