mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 46

Question 450

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a manually configured destination prefix has no usable forwarding adjacency. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Change the device hostname to match the prefix.
  2. Reference an appropriate reachable next-hop group for the static route.
  3. Use a MAC move event as a static route next hop.
  4. Record the route only in syslog without installing it.

Explanation

Correct Answer

B:

A static route needs a viable forwarding disposition or next-hop resolution. For Delta-6, confirm the actual outcome: the static prefix is installed with a valid resolved forwarding next hop.

Incorrect Answers

A:

“Change the device hostname to match the prefix” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

C:

“Use a MAC move event as a static route next hop” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

D:

“Record the route only in syslog without installing it” targets a different operation from the reported requirement: “a manually configured destination prefix has no usable forwarding adjacency”. A static route needs a viable forwarding disposition or next-hop resolution. Use the appropriate method: Reference an appropriate reachable next-hop group for the static route.

Question 451

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that operations need machine-readable configuration and operational state. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Treat free-form screen text as the sole authoritative schema.
  2. Infer device state only from an external spreadsheet.
  3. Use SR Linux model-driven YANG configuration and state models.
  4. Store all device configuration in manually maintained CLI screenshots.

Explanation

Correct Answer

C:

YANG describes a structured data model that management clients can interpret. For Atlas-7, confirm the actual outcome: retrieved modeled configuration and state reflect the target object accurately.

Incorrect Answers

A:

“Treat free-form screen text as the sole authoritative schema” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

B:

“Infer device state only from an external spreadsheet” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Store all device configuration in manually maintained CLI screenshots” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 452

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a policy requires a destination prefix to be explicitly discarded. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Create an EVPN Type 2 MAC advertisement for all discarded packets.
  2. Assign a CLI shortcut that echoes the prefix.
  3. Publish the prefix as a bridged access VLAN.
  4. Use a properly scoped static blackhole disposition for that prefix.

Explanation

Correct Answer

D:

A blackhole route deliberately discards matching traffic rather than forwarding it. For Harbor-1, confirm the actual outcome: the targeted prefix resolves to discard while unrelated prefixes keep valid paths.

Incorrect Answers

A:

“Create an EVPN Type 2 MAC advertisement for all discarded packets” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix.

B:

“Assign a CLI shortcut that echoes the prefix” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix.

C:

“Publish the prefix as a bridged access VLAN” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix.

Question 453

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a support team wants reusable context values across diagnostic commands. The planned change is "Use supported CLI environment variables for repeatable command contexts." Which post-change observation best validates the intended technical behavior?

  1. Verify that the intended CLI context resolves consistently during diagnostics.
  2. Check only that the device hostname is listed in the inventory, without examining cli environment settings behavior.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required cli environment settings condition.

Explanation

Correct Answer

A:

Environment variables organize command-line context rather than protocol forwarding. The option uses “Verify that the intended CLI context resolves consistently during diagnostics” to address “a support team wants reusable context values across diagnostic commands”. The acceptance test is: the intended CLI context resolves consistently during diagnostics. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

B:

“Check only that the device hostname is listed in the inventory, without examining cli environment settings behavior” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. The confirming result is: the intended CLI context resolves consistently during diagnostics. Confirm that the replacement leaf reaches the expected operational state.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. The confirming result is: the intended CLI context resolves consistently during diagnostics. Confirm that the replacement leaf reaches the expected operational state.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required cli environment settings condition” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. The confirming result is: the intended CLI context resolves consistently during diagnostics. Confirm that the replacement leaf reaches the expected operational state.

Question 454

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that a large route display contains noise and a specific match must be isolated. Which engineering action best satisfies this request?

  1. Block the route through an ACL to make it disappear.
  2. Apply supported CLI filtering to narrow the displayed results.
  3. Remove the routing protocol configuration to reduce output.
  4. Edit a syslog file and assume the route table is filtered.

Explanation

Correct Answer

B:

Output filtering changes the view without changing routing behavior. For Summit-4, confirm the actual outcome: the filtered display includes the target entries while forwarding stays unchanged.

Incorrect Answers

A:

“Block the route through an ACL to make it disappear” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results.

C:

“Remove the routing protocol configuration to reduce output” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results.

D:

“Edit a syslog file and assume the route table is filtered” targets a different operation from the reported requirement: “a large route display contains noise and a specific match must be isolated”. Output filtering changes the view without changing routing behavior. Use the appropriate method: Apply supported CLI filtering to narrow the displayed results.

Question 455

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that two remote VTEPs must carry a tenant overlay across routed links. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Convert every spine interface to an untagged access port.
  2. Treat the tenant service route target as an underlay IP gateway.
  3. Configure matching VTEP reachability and VXLAN overlay endpoint settings.
  4. Use BFD alone as a replacement for VXLAN packet encapsulation.

Explanation

Correct Answer

C:

VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. For Pine-9, confirm the actual outcome: the configured endpoints exchange tenant traffic over reachable underlay paths.

Incorrect Answers

A:

“Convert every spine interface to an untagged access port” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings. Confirm that the replacement leaf reaches the expected operational state.

B:

“Treat the tenant service route target as an underlay IP gateway” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings. Confirm that the replacement leaf reaches the expected operational state.

D:

“Use BFD alone as a replacement for VXLAN packet encapsulation” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings. Confirm that the replacement leaf reaches the expected operational state.

Question 456

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a management client needs a structured request-response configuration interface. A peer suggested: "Send an Ethernet broadcast as a configuration API request" That did not solve the constraint. What should be chosen instead?

  1. Send an Ethernet broadcast as a configuration API request.
  2. Poll an unrelated time server for router configuration state.
  3. Edit platform binaries directly to change configuration.
  4. Use the supported SR Linux JSON-RPC management interface.

Explanation

Correct Answer

D:

JSON-RPC offers a structured management access method instead of screen scraping. The option uses “Use the supported SR Linux JSON-RPC management interface” to address “a management client needs a structured request-response configuration interface”. The result must be observed on the affected component.

Incorrect Answers

A:

“Send an Ethernet broadcast as a configuration API request” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface.

B:

“Poll an unrelated time server for router configuration state” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface.

C:

“Edit platform binaries directly to change configuration” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface.

Question 457

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that a control protocol is intermittently dropped after aggressive protection settings. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Review CPM classification and policer rates against required control traffic.
  2. Increase interface CRC counters manually to hide packet drops.
  3. Change the system time zone to eliminate policing.
  4. Disable every routing policy to bypass CPU filtering.

Explanation

Correct Answer

A:

Correctly scoped policing balances CPU protection with valid protocol liveliness. The option uses “Review CPM classification and policer rates against required control traffic” to address “a control protocol is intermittently dropped after aggressive protection settings”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Increase interface CRC counters manually to hide packet drops” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic. Before onboarding, test that the intended fabric state exists.

C:

“Change the system time zone to eliminate policing” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic. Before onboarding, test that the intended fabric state exists.

D:

“Disable every routing policy to bypass CPU filtering” targets a different operation from the reported requirement: “a control protocol is intermittently dropped after aggressive protection settings”. Correctly scoped policing balances CPU protection with valid protocol liveliness. Use the appropriate method: Review CPM classification and policer rates against required control traffic. Before onboarding, test that the intended fabric state exists.

Question 458

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that a link carries packets but the application sees intermittent errors. Which engineering action best satisfies this request?

  1. Assume a green GUI icon proves no packet impairment.
  2. Inspect error, discard and packet counters for that interface.
  3. Change the route distinguisher to reset physical CRC errors.
  4. Check only the switch hostname to judge packet loss.

Explanation

Correct Answer

B:

Counters help distinguish physical or forwarding problems from configuration guesses. For Harbor-1, confirm the actual outcome: error and discard trends align with measured traffic and reported symptoms.

Incorrect Answers

A:

“Assume a green GUI icon proves no packet impairment” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

C:

“Change the route distinguisher to reset physical CRC errors” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

D:

“Check only the switch hostname to judge packet loss” targets a different operation from the reported requirement: “a link carries packets but the application sees intermittent errors”. Counters help distinguish physical or forwarding problems from configuration guesses. Use the appropriate method: Inspect error, discard and packet counters for that interface.

Question 459

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a short incident window requires evidence of selected packets without broad logging. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Export only configuration checkpoints and infer packet contents.
  2. Use a route target as a packet capture selector.
  3. Use a scoped SR Linux capture filter and inspect the captured traffic.
  4. Change an interface alias to make missing packets visible.

Explanation

Correct Answer

C:

Capture filters select packet observations for troubleshooting rather than changing policy by themselves. For Pine-9, confirm the actual outcome: the capture contains relevant matching frames from the requested interface or path.

Incorrect Answers

A:

“Export only configuration checkpoints and infer packet contents” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic. Confirm that the replacement leaf reaches the expected operational state.

B:

“Use a route target as a packet capture selector” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic. Confirm that the replacement leaf reaches the expected operational state.

D:

“Change an interface alias to make missing packets visible” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic. Confirm that the replacement leaf reaches the expected operational state.

Question 460

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that the same tenant MAC oscillates between attachments and causes instability. A peer suggested: "Turn the tenant L3 prefix into a static blackhole" That did not solve the constraint. What should be chosen instead?

  1. Turn the tenant L3 prefix into a static blackhole.
  2. Increase BGP timers without examining the shifting MAC.
  3. Change only the management username to stop MAC flaps.
  4. Inspect and apply the MAC move controls and investigate the attachment loop.

Explanation

Correct Answer

D:

MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. For Metro-8, confirm the actual outcome: MAC learning stabilizes on the intended attachment without recurrent move alarms.

Incorrect Answers

A:

“Turn the tenant L3 prefix into a static blackhole” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Increase BGP timers without examining the shifting MAC” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Change only the management username to stop MAC flaps” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop. Observe the relevant forwarding/control-plane behavior under the approved test.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests