mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 47

Question 460

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that the same tenant MAC oscillates between attachments and causes instability. A peer suggested: "Turn the tenant L3 prefix into a static blackhole" That did not solve the constraint. What should be chosen instead?

  1. Turn the tenant L3 prefix into a static blackhole.
  2. Increase BGP timers without examining the shifting MAC.
  3. Change only the management username to stop MAC flaps.
  4. Inspect and apply the MAC move controls and investigate the attachment loop.

Explanation

Correct Answer

D:

MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. For Metro-8, confirm the actual outcome: MAC learning stabilizes on the intended attachment without recurrent move alarms.

Incorrect Answers

A:

“Turn the tenant L3 prefix into a static blackhole” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Increase BGP timers without examining the shifting MAC” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Change only the management username to stop MAC flaps” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 461

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that unexpected packets target the switch control plane and risk exhausting CPU. The planned change is "Use the CPM filter and appropriate control-plane policers." Which post-change observation best validates the intended technical behavior?

  1. Verify that legitimate control traffic passes within policy while unwanted rates are constrained.
  2. Check only that the device hostname is listed in the inventory, without examining control-plane protection behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required control-plane protection condition.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

A:

Control-plane filters and policers protect protocol and management processing capacity. The option uses “Verify that legitimate control traffic passes within policy while unwanted rates are constrained” to address “unexpected packets target the switch control plane and risk exhausting CPU”. The acceptance test is: legitimate control traffic passes within policy while unwanted rates are constrained. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

B:

“Check only that the device hostname is listed in the inventory, without examining control-plane protection behavior” targets a different operation from the reported requirement: “unexpected packets target the switch control plane and risk exhausting CPU”. Control-plane filters and policers protect protocol and management processing capacity. The confirming result is: legitimate control traffic passes within policy while unwanted rates are constrained. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required control-plane protection condition” targets a different operation from the reported requirement: “unexpected packets target the switch control plane and risk exhausting CPU”. Control-plane filters and policers protect protocol and management processing capacity. The confirming result is: legitimate control traffic passes within policy while unwanted rates are constrained. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “unexpected packets target the switch control plane and risk exhausting CPU”. Control-plane filters and policers protect protocol and management processing capacity. The confirming result is: legitimate control traffic passes within policy while unwanted rates are constrained. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 462

In the fictional Pine-9 west pod, a replacement leaf with configuration review requirements, the team reports that an expanding data hall requires extra fabric path capacity without redesigning every leaf. A peer suggested: "Insert a single Layer 2 hub between all existing spines" That did not solve the constraint. What should be chosen instead?

  1. Remove the routed underlay and create one broadcast domain.
  2. Add compatible spine capacity and attach the fabric leaves to it.
  3. Insert a single Layer 2 hub between all existing spines.
  4. Force every leaf to forward through its physical neighbor leaf.

Explanation

Correct Answer

B:

Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. The option uses “Add compatible spine capacity and attach the fabric leaves to it” to address “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. The result must be observed on the affected component. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Remove the routed underlay and create one broadcast domain” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Confirm that the replacement leaf reaches the expected operational state.

C:

“Insert a single Layer 2 hub between all existing spines” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Confirm that the replacement leaf reaches the expected operational state.

D:

“Force every leaf to forward through its physical neighbor leaf” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Confirm that the replacement leaf reaches the expected operational state.

Question 463

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that the monitoring platform is flooded with low-priority diagnostic records. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Disable all logging including faults and security events.
  2. Change tenant VRFs to control severity thresholds.
  3. Tune supported logging levels and destinations while retaining important events.
  4. Drop BGP adjacencies to reduce syslog volume.

Explanation

Correct Answer

C:

Severity and destination selection reduce noise without removing necessary fault evidence. For Summit-4, confirm the actual outcome: critical events remain visible while routine noise is reduced.

Incorrect Answers

A:

“Disable all logging including faults and security events” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. Use the appropriate method: Tune supported logging levels and destinations while retaining important events.

B:

“Change tenant VRFs to control severity thresholds” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. Use the appropriate method: Tune supported logging levels and destinations while retaining important events.

D:

“Drop BGP adjacencies to reduce syslog volume” targets a different operation from the reported requirement: “the monitoring platform is flooded with low-priority diagnostic records”. Severity and destination selection reduce noise without removing necessary fault evidence. Use the appropriate method: Tune supported logging levels and destinations while retaining important events.

Question 464

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that automation must distinguish configured interface intent from observed link health. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Treat desired admin state as proof of operational signal.
  2. Use an EVPN route target as the source of optics health.
  3. Rely on VLAN names as physical transceiver measurements.
  4. Read the appropriate modeled configuration and state objects separately.

Explanation

Correct Answer

D:

A configured value and an operationally measured value answer different questions. For Metro-8, confirm the actual outcome: the model shows both intended admin setting and actual operational status.

Incorrect Answers

A:

“Treat desired admin state as proof of operational signal” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Use an EVPN route target as the source of optics health” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Rely on VLAN names as physical transceiver measurements” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. Use the appropriate method: Read the appropriate modeled configuration and state objects separately. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 465

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that newly powered switches should receive initial configuration with minimal manual access. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Provide the required ZTP discovery and bootstrap information through supported services.
  2. Expect a device to discover complete configuration from EVPN route targets alone.
  3. Configure only a tenant MAC-VRF on a disconnected laptop.
  4. Assume DNS hostname changes automatically create the bootstrap configuration.

Explanation

Correct Answer

A:

ZTP depends on reachable bootstrap infrastructure and device discovery behavior. For Delta-6, confirm the actual outcome: the device discovers its bootstrap source and applies the intended initial configuration.

Incorrect Answers

B:

“Expect a device to discover complete configuration from EVPN route targets alone” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

C:

“Configure only a tenant MAC-VRF on a disconnected laptop” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

D:

“Assume DNS hostname changes automatically create the bootstrap configuration” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Use the appropriate method: Provide the required ZTP discovery and bootstrap information through supported services.

Question 466

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that operations need machine-readable configuration and operational state. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Store all device configuration in manually maintained CLI screenshots.
  2. Use SR Linux model-driven YANG configuration and state models.
  3. Treat free-form screen text as the sole authoritative schema.
  4. Infer device state only from an external spreadsheet.

Explanation

Correct Answer

B:

YANG describes a structured data model that management clients can interpret. For Summit-4, confirm the actual outcome: retrieved modeled configuration and state reflect the target object accurately.

Incorrect Answers

A:

“Store all device configuration in manually maintained CLI screenshots” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models.

C:

“Treat free-form screen text as the sole authoritative schema” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models.

D:

“Infer device state only from an external spreadsheet” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. Use the appropriate method: Use SR Linux model-driven YANG configuration and state models.

Question 467

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that two engineers are comparing configured state with a pending change. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use an ACL counter as a substitute for configuration comparison.
  2. Discard the running view and trust only an offline screenshot.
  3. Compare the running and candidate views rather than treating them as identical.
  4. Assume any staged edit is automatically committed.

Explanation

Correct Answer

C:

Running and candidate configurations represent different phases of an edit transaction. The option uses “Compare the running and candidate views rather than treating them as identical” to address “two engineers are comparing configured state with a pending change”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use an ACL counter as a substitute for configuration comparison” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. Use the appropriate method: Compare the running and candidate views rather than treating them as identical. Before onboarding, test that the intended fabric state exists.

B:

“Discard the running view and trust only an offline screenshot” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. Use the appropriate method: Compare the running and candidate views rather than treating them as identical. Before onboarding, test that the intended fabric state exists.

D:

“Assume any staged edit is automatically committed” targets a different operation from the reported requirement: “two engineers are comparing configured state with a pending change”. Running and candidate configurations represent different phases of an edit transaction. Use the appropriate method: Compare the running and candidate views rather than treating them as identical. Before onboarding, test that the intended fabric state exists.

Question 468

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that several operators repeatedly use the same long diagnostic command. A peer suggested: "Reboot the switch after every repeated command" That did not solve the constraint. What should be chosen instead?

  1. Reboot the switch after every repeated command.
  2. Add a BGP community only to shorten the command text.
  3. Create a data-plane VXLAN tunnel for terminal convenience.
  4. Create an appropriate CLI alias for the recurring diagnostic command.

Explanation

Correct Answer

D:

Aliases improve CLI usability without altering network forwarding semantics. For Metro-8, confirm the actual outcome: the alias expands to the intended diagnostic action.

Incorrect Answers

A:

“Reboot the switch after every repeated command” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Add a BGP community only to shorten the command text” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Create a data-plane VXLAN tunnel for terminal convenience” targets a different operation from the reported requirement: “several operators repeatedly use the same long diagnostic command”. Aliases improve CLI usability without altering network forwarding semantics. Use the appropriate method: Create an appropriate CLI alias for the recurring diagnostic command. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 469

In the fictional Summit-4 west pod, a change-freeze exception for a narrow operational fault, the team reports that two different EVPN sources can advertise otherwise identical service prefixes. Which engineering action best satisfies this request?

  1. Assign appropriate route distinguishers so VPN routes have distinct identities.
  2. Remove all identifiers to force unique route origin tracking.
  3. Use an interface ACL sequence number as a VPN route key.
  4. Use a route target as the only globally unique origin identifier.

Explanation

Correct Answer

A:

A route distinguisher contributes VPN route uniqueness and is separate from import policy. For Summit-4, confirm the actual outcome: distinct route sources maintain distinguishable VPN route keys.

Incorrect Answers

B:

“Remove all identifiers to force unique route origin tracking” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities.

C:

“Use an interface ACL sequence number as a VPN route key” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities.

D:

“Use a route target as the only globally unique origin identifier” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities.

Question 470

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that traffic uses a tenant VRF but only the default route table was examined. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Check an unrelated MAC-VRF as the IPv4 lookup table.
  2. Inspect the forwarding and routing tables inside the actual tenant IP-VRF.
  3. Change the transport MTU without inspecting the tenant route.
  4. Assume default-instance routes always show tenant decisions.

Explanation

Correct Answer

B:

VRF-specific forwarding decisions require examining the correct routing instance. The option uses “Inspect the forwarding and routing tables inside the actual tenant IP-VRF” to address “traffic uses a tenant VRF but only the default route table was examined”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Check an unrelated MAC-VRF as the IPv4 lookup table” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. Use the appropriate method: Inspect the forwarding and routing tables inside the actual tenant IP-VRF. Before onboarding, test that the intended fabric state exists.

C:

“Change the transport MTU without inspecting the tenant route” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. Use the appropriate method: Inspect the forwarding and routing tables inside the actual tenant IP-VRF. Before onboarding, test that the intended fabric state exists.

D:

“Assume default-instance routes always show tenant decisions” targets a different operation from the reported requirement: “traffic uses a tenant VRF but only the default route table was examined”. VRF-specific forwarding decisions require examining the correct routing instance. Use the appropriate method: Inspect the forwarding and routing tables inside the actual tenant IP-VRF. Before onboarding, test that the intended fabric state exists.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests