mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 43

Question 420

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that newly powered switches should receive initial configuration with minimal manual access. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Configure only a tenant MAC-VRF on a disconnected laptop.
  2. Assume DNS hostname changes automatically create the bootstrap configuration.
  3. Expect a device to discover complete configuration from EVPN route targets alone.
  4. Provide the required ZTP discovery and bootstrap information through supported services.

Explanation

Correct Answer

D:

ZTP depends on reachable bootstrap infrastructure and device discovery behavior. Check: the device discovers its bootstrap source and applies the intended initial configuration.

Incorrect Answers

A:

“Configure only a tenant MAC-VRF on a disconnected laptop” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The confirming result is: the device discovers its bootstrap source and applies the intended initial configuration. For the staged migration, validate the affected path before expansion.

B:

“Assume DNS hostname changes automatically create the bootstrap configuration” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The confirming result is: the device discovers its bootstrap source and applies the intended initial configuration. For the staged migration, validate the affected path before expansion.

C:

“Expect a device to discover complete configuration from EVPN route targets alone” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The confirming result is: the device discovers its bootstrap source and applies the intended initial configuration. For the staged migration, validate the affected path before expansion.

Question 421

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that a VLAN-backed tenant segment is being extended using VXLAN. Which engineering action best satisfies this request?

  1. Map the intended local tenant bridging context to the correct VNI.
  2. Use the BGP AS number as an automatic VLAN-to-VNI mapping.
  3. Replace VNI configuration with a static IPv4 default route.
  4. Apply a system ACL to name a tenant broadcast segment.

Explanation

Correct Answer

A:

A VNI identifies the logical VXLAN segment carried over the IP fabric. For Atlas-7, confirm the actual outcome: both VTEPs use the intended VNI for the tenant segment.

Incorrect Answers

B:

“Use the BGP AS number as an automatic VLAN-to-VNI mapping” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Replace VNI configuration with a static IPv4 default route” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Apply a system ACL to name a tenant broadcast segment” targets a different operation from the reported requirement: “a VLAN-backed tenant segment is being extended using VXLAN”. A VNI identifies the logical VXLAN segment carried over the IP fabric. Use the appropriate method: Map the intended local tenant bridging context to the correct VNI. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 422

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that a script parses configuration output into machine-readable fields. The planned change is "Request JSON-formatted CLI or API output rather than scrape decorated terminal text." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that the output parses as JSON with expected keys and values.
  3. Use an unrelated tenant dashboard as proof, without verifying the required structured display condition.
  4. Check only that the device hostname is listed in the inventory, without examining structured display behavior.

Explanation

Correct Answer

B:

Structured output avoids brittle assumptions about human-oriented CLI presentation. The option uses “Verify that the output parses as JSON with expected keys and values” to address “a script parses configuration output into machine-readable fields”. The acceptance test is: the output parses as JSON with expected keys and values.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a script parses configuration output into machine-readable fields”. Structured output avoids brittle assumptions about human-oriented CLI presentation. The confirming result is: the output parses as JSON with expected keys and values.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required structured display condition” targets a different operation from the reported requirement: “a script parses configuration output into machine-readable fields”. Structured output avoids brittle assumptions about human-oriented CLI presentation. The confirming result is: the output parses as JSON with expected keys and values.

D:

“Check only that the device hostname is listed in the inventory, without examining structured display behavior” targets a different operation from the reported requirement: “a script parses configuration output into machine-readable fields”. Structured output avoids brittle assumptions about human-oriented CLI presentation. The confirming result is: the output parses as JSON with expected keys and values.

Question 423

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that a remote overlay endpoint cannot be reached over the physical fabric. Which engineering action best satisfies this request?

  1. Change the application hostname while leaving the network unchanged.
  2. Recreate the tenant VLAN without checking IP reachability.
  3. Restore IP routing reachability to the remote VTEP address in the underlay.
  4. Disable BGP EVPN to hide underlay route loss.

Explanation

Correct Answer

C:

An overlay packet still needs an IP path to its outer tunnel destination. For North-10, confirm the actual outcome: the remote VTEP loopback is reachable through the intended underlay route.

Incorrect Answers

A:

“Change the application hostname while leaving the network unchanged” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay. Before onboarding, test that the intended fabric state exists.

B:

“Recreate the tenant VLAN without checking IP reachability” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay. Before onboarding, test that the intended fabric state exists.

D:

“Disable BGP EVPN to hide underlay route loss” targets a different operation from the reported requirement: “a remote overlay endpoint cannot be reached over the physical fabric”. An overlay packet still needs an IP path to its outer tunnel destination. Use the appropriate method: Restore IP routing reachability to the remote VTEP address in the underlay. Before onboarding, test that the intended fabric state exists.

Question 424

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that the intended fabric topology differs from deployed configuration on several nodes. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Replace all route policies with packet captures.
  2. Manually change one switch and assume the whole fabric follows.
  3. Use log severity changes as the desired-state data model.
  4. Use EDA fabric-intent workflows to reconcile desired fabric configuration.

Explanation

Correct Answer

D:

Intent-based automation represents desired outcomes and coordinates enforcement. For Metro-8, confirm the actual outcome: deployed fabric resources converge toward the declared and validated intent.

Incorrect Answers

A:

“Replace all route policies with packet captures” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration. Observe the relevant forwarding/control-plane behavior under the approved test.

B:

“Manually change one switch and assume the whole fabric follows” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Use log severity changes as the desired-state data model” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 425

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that a support team wants reusable context values across diagnostic commands. Which engineering action best satisfies this request?

  1. Use supported CLI environment variables for repeatable command contexts.
  2. Edit an ACL policer as a substitute for CLI variables.
  3. Advertise CLI strings as EVPN prefixes.
  4. Write a static route for every terminal shortcut.

Explanation

Correct Answer

A:

Environment variables organize command-line context rather than protocol forwarding. For Pine-9, confirm the actual outcome: the intended CLI context resolves consistently during diagnostics.

Incorrect Answers

B:

“Edit an ACL policer as a substitute for CLI variables” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts. Confirm that the replacement leaf reaches the expected operational state.

C:

“Advertise CLI strings as EVPN prefixes” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts. Confirm that the replacement leaf reaches the expected operational state.

D:

“Write a static route for every terminal shortcut” targets a different operation from the reported requirement: “a support team wants reusable context values across diagnostic commands”. Environment variables organize command-line context rather than protocol forwarding. Use the appropriate method: Use supported CLI environment variables for repeatable command contexts. Confirm that the replacement leaf reaches the expected operational state.

Question 426

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that equal-cost uplinks should carry traffic while preserving resilient paths. The planned change is "Use ECMP across eligible equal-cost routed next hops." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that multiple eligible next hops appear in the relevant routing and forwarding state.
  3. Use an unrelated tenant dashboard as proof, without verifying the required multi-path forwarding condition.
  4. Check only that the device hostname is listed in the inventory, without examining multi-path forwarding behavior.

Explanation

Correct Answer

B:

ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. The option uses “Verify that multiple eligible next hops appear in the relevant routing and forwarding state” to address “equal-cost uplinks should carry traffic while preserving resilient paths”. The acceptance test is: multiple eligible next hops appear in the relevant routing and forwarding state. Observe the relevant forwarding/control-plane behavior under the approved test.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “equal-cost uplinks should carry traffic while preserving resilient paths”. ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. The confirming result is: multiple eligible next hops appear in the relevant routing and forwarding state. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required multi-path forwarding condition” targets a different operation from the reported requirement: “equal-cost uplinks should carry traffic while preserving resilient paths”. ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. The confirming result is: multiple eligible next hops appear in the relevant routing and forwarding state. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Check only that the device hostname is listed in the inventory, without examining multi-path forwarding behavior” targets a different operation from the reported requirement: “equal-cost uplinks should carry traffic while preserving resilient paths”. ECMP lets the forwarding plane choose among eligible next hops without a spanning Layer 2 tree. The confirming result is: multiple eligible next hops appear in the relevant routing and forwarding state. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 427

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that an expanding data hall requires extra fabric path capacity without redesigning every leaf. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Remove the routed underlay and create one broadcast domain.
  2. Force every leaf to forward through its physical neighbor leaf.
  3. Add compatible spine capacity and attach the fabric leaves to it.
  4. Insert a single Layer 2 hub between all existing spines.

Explanation

Correct Answer

C:

Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. For Ridge-2, confirm the actual outcome: new spine adjacencies and expected routes become operational on participating leaves.

Incorrect Answers

A:

“Remove the routed underlay and create one broadcast domain” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it.

B:

“Force every leaf to forward through its physical neighbor leaf” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it.

D:

“Insert a single Layer 2 hub between all existing spines” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it.

Question 428

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that management access to the switch itself must be restricted. A peer suggested: "Change a VXLAN VNI as an SSH authentication filter" That did not solve the constraint. What should be chosen instead?

  1. Change a VXLAN VNI as an SSH authentication filter.
  2. Disable tenant EVPN routes to secure the management endpoint.
  3. Use only a tenant interface ACL and assume it protects all device management.
  4. Use the applicable system ACL or management-access policy for device-bound traffic.

Explanation

Correct Answer

D:

System-level access filtering concerns traffic destined to the device, not just transit services. For Delta-6, confirm the actual outcome: management probes obey the intended permitted source and port policy.

Incorrect Answers

A:

“Change a VXLAN VNI as an SSH authentication filter” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

B:

“Disable tenant EVPN routes to secure the management endpoint” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

C:

“Use only a tenant interface ACL and assume it protects all device management” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic.

Question 429

In the fictional Harbor-1 east pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that operators need to compare desired fabric behavior with measured network state. Which engineering action best satisfies this request?

  1. Use EDA observability with state-driven monitoring and event correlation.
  2. Ignore all network events once the initial intent is accepted.
  3. Use one manually updated spreadsheet as a live telemetry stream.
  4. Assume a configuration file alone proves live traffic health.

Explanation

Correct Answer

A:

Observability connects operational measurements and events to intended network operation. For Harbor-1, confirm the actual outcome: telemetry and events show whether deployed behavior matches intended service state.

Incorrect Answers

B:

“Ignore all network events once the initial intent is accepted” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation.

C:

“Use one manually updated spreadsheet as a live telemetry stream” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation.

D:

“Assume a configuration file alone proves live traffic health” targets a different operation from the reported requirement: “operators need to compare desired fabric behavior with measured network state”. Observability connects operational measurements and events to intended network operation. Use the appropriate method: Use EDA observability with state-driven monitoring and event correlation.

Question 430

In the fictional Orchard-3 east pod, a lab-to-production migration after a successful canary, the team reports that a leaf's routed BGP peering fails after peer-AS data was changed. A peer suggested: "Change the syslog severity to fix the session" That did not solve the constraint. What should be chosen instead?

  1. Create a MAC-VRF rather than verifying the neighbor.
  2. Correct the neighbor addressing and peer autonomous system configuration.
  3. Add a VXLAN VNI to establish the underlay BGP session.
  4. Change the syslog severity to fix the session.

Explanation

Correct Answer

B:

BGP session establishment requires consistent neighbor transport and AS expectations. Check: the intended BGP neighbor is established with the correct peer identity.

Incorrect Answers

A:

“Create a MAC-VRF rather than verifying the neighbor” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. The confirming result is: the intended BGP neighbor is established with the correct peer identity. For the staged migration, validate the affected path before expansion.

C:

“Add a VXLAN VNI to establish the underlay BGP session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. The confirming result is: the intended BGP neighbor is established with the correct peer identity. For the staged migration, validate the affected path before expansion.

D:

“Change the syslog severity to fix the session” targets a different operation from the reported requirement: “a leaf's routed BGP peering fails after peer-AS data was changed”. BGP session establishment requires consistent neighbor transport and AS expectations. The confirming result is: the intended BGP neighbor is established with the correct peer identity. For the staged migration, validate the affected path before expansion.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests