mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 41

Question 400

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that an on-call engineer needs a compact human-readable comparison of many interfaces. Which engineering action best satisfies this request?

  1. Disable interface statistics to shorten every command.
  2. Force binary packet capture as the only display format.
  3. Export full model trees when a focused overview is needed.
  4. Use the CLI table presentation where supported.

Explanation

Correct Answer

D:

Table presentation makes repeated fields easier to compare interactively. For Ridge-2, confirm the actual outcome: the displayed table contains the intended interfaces and columns.

Incorrect Answers

A:

“Disable interface statistics to shorten every command” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

B:

“Force binary packet capture as the only display format” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

C:

“Export full model trees when a focused overview is needed” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

Question 401

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that two access ports must share tenant Layer 2 reachability without becoming a global bridge. Which engineering action best satisfies this request?

  1. Attach the ports to the intended MAC-VRF bridge domain.
  2. Use an IP-VRF alone as the Ethernet switching table.
  3. Leak all tenant routes into the default network instance.
  4. Use a CPM policer as the VLAN-to-bridge mapping.

Explanation

Correct Answer

A:

A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. For Atlas-7, confirm the actual outcome: the local tenant MACs learn within only the chosen MAC-VRF.

Incorrect Answers

B:

“Use an IP-VRF alone as the Ethernet switching table” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Leak all tenant routes into the default network instance” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Use a CPM policer as the VLAN-to-bridge mapping” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Use the appropriate method: Attach the ports to the intended MAC-VRF bridge domain. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 402

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that two remote VTEPs must carry a tenant overlay across routed links. A peer suggested: "Use BFD alone as a replacement for VXLAN packet encapsulation" That did not solve the constraint. What should be chosen instead?

  1. Treat the tenant service route target as an underlay IP gateway.
  2. Configure matching VTEP reachability and VXLAN overlay endpoint settings.
  3. Use BFD alone as a replacement for VXLAN packet encapsulation.
  4. Convert every spine interface to an untagged access port.

Explanation

Correct Answer

B:

VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. The option uses “Configure matching VTEP reachability and VXLAN overlay endpoint settings” to address “two remote VTEPs must carry a tenant overlay across routed links”. The result must be observed on the affected component.

Incorrect Answers

A:

“Treat the tenant service route target as an underlay IP gateway” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings.

C:

“Use BFD alone as a replacement for VXLAN packet encapsulation” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings.

D:

“Convert every spine interface to an untagged access port” targets a different operation from the reported requirement: “two remote VTEPs must carry a tenant overlay across routed links”. VTEPs encapsulate and decapsulate VXLAN traffic using reachable outer IP endpoints. Use the appropriate method: Configure matching VTEP reachability and VXLAN overlay endpoint settings.

Question 403

In the fictional Summit-4 east pod, a change-freeze exception for a narrow operational fault, the team reports that remote tenant hosts in one subnet need bridged reachability over VXLAN. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Use only an underlay default route without an L2 overlay service.
  2. Put tenant endpoints solely in a remote unconnected IP-VRF.
  3. Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.
  4. Require all hosts to connect to the same physical access switch.

Explanation

Correct Answer

C:

L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. For Summit-4, confirm the actual outcome: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage.

Incorrect Answers

A:

“Use only an underlay default route without an L2 overlay service” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.

B:

“Put tenant endpoints solely in a remote unconnected IP-VRF” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.

D:

“Require all hosts to connect to the same physical access switch” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.

Question 404

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a short incident window requires evidence of selected packets without broad logging. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Change an interface alias to make missing packets visible.
  2. Use a route target as a packet capture selector.
  3. Export only configuration checkpoints and infer packet contents.
  4. Use a scoped SR Linux capture filter and inspect the captured traffic.

Explanation

Correct Answer

D:

Capture filters select packet observations for troubleshooting rather than changing policy by themselves. For Delta-6, confirm the actual outcome: the capture contains relevant matching frames from the requested interface or path.

Incorrect Answers

A:

“Change an interface alias to make missing packets visible” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic.

B:

“Use a route target as a packet capture selector” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic.

C:

“Export only configuration checkpoints and infer packet contents” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. Use the appropriate method: Use a scoped SR Linux capture filter and inspect the captured traffic.

Question 405

In the fictional Harbor-1 west pod, a staged top-of-rack rollout with a bounded maintenance window, the team reports that remote tenant hosts in one subnet need bridged reachability over VXLAN. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.
  2. Require all hosts to connect to the same physical access switch.
  3. Use only an underlay default route without an L2 overlay service.
  4. Put tenant endpoints solely in a remote unconnected IP-VRF.

Explanation

Correct Answer

A:

L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. For Harbor-1, confirm the actual outcome: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage.

Incorrect Answers

B:

“Require all hosts to connect to the same physical access switch” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.

C:

“Use only an underlay default route without an L2 overlay service” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.

D:

“Put tenant endpoints solely in a remote unconnected IP-VRF” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. Use the appropriate method: Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers.

Question 406

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that several static routes must share a maintained forwarding next-hop selection. The planned change is "Define and reference an appropriate next-hop group." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Verify that the intended static routes resolve through the maintained next-hop group.
  3. Check only that the device hostname is listed in the inventory, without examining next-hop group reuse behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required next-hop group reuse condition.

Explanation

Correct Answer

B:

A next-hop group separates forwarding next-hop membership from destination-prefix entries. The option uses “Verify that the intended static routes resolve through the maintained next-hop group” to address “several static routes must share a maintained forwarding next-hop selection”. The acceptance test is: the intended static routes resolve through the maintained next-hop group. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. The confirming result is: the intended static routes resolve through the maintained next-hop group. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Check only that the device hostname is listed in the inventory, without examining next-hop group reuse behavior” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. The confirming result is: the intended static routes resolve through the maintained next-hop group. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required next-hop group reuse condition” targets a different operation from the reported requirement: “several static routes must share a maintained forwarding next-hop selection”. A next-hop group separates forwarding next-hop membership from destination-prefix entries. The confirming result is: the intended static routes resolve through the maintained next-hop group. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 407

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that a customer needs an isolated IPv4 route table. A peer suggested: "Put all customer prefixes into an unsegmented default routing table" That did not solve the constraint. What should be chosen instead?

  1. Use a CLI alias as the customer network instance.
  2. Put all customer prefixes into an unsegmented default routing table.
  3. Use a dedicated IP-VRF network instance for its Layer 3 routes.
  4. Use only a MAC-VRF when separate L3 routes are required.

Explanation

Correct Answer

C:

An IP-VRF gives the tenant a distinct IP forwarding context. For Delta-6, confirm the actual outcome: the tenant's prefixes appear in the intended IP-VRF and not unrelated VRFs.

Incorrect Answers

A:

“Use a CLI alias as the customer network instance” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes.

B:

“Put all customer prefixes into an unsegmented default routing table” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes.

D:

“Use only a MAC-VRF when separate L3 routes are required” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes.

Question 408

In the fictional Ridge-2 east pod, a secondary data hall with tenant isolation requirements, the team reports that an operator needs live interface operational data rather than only intended settings. The planned change is "Inspect the operational state datastore or state-oriented CLI view." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Check only that the device hostname is listed in the inventory, without examining operational state inspection behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required operational state inspection condition.
  4. Verify that the relevant state paths show current link and counter values.

Explanation

Correct Answer

D:

Operational state exposes what the system reports now rather than merely requested configuration. The option uses “Verify that the relevant state paths show current link and counter values” to address “an operator needs live interface operational data rather than only intended settings”. The acceptance test is: the relevant state paths show current link and counter values.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. The confirming result is: the relevant state paths show current link and counter values.

B:

“Check only that the device hostname is listed in the inventory, without examining operational state inspection behavior” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. The confirming result is: the relevant state paths show current link and counter values.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required operational state inspection condition” targets a different operation from the reported requirement: “an operator needs live interface operational data rather than only intended settings”. Operational state exposes what the system reports now rather than merely requested configuration. The confirming result is: the relevant state paths show current link and counter values.

Question 409

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that the intended fabric topology differs from deployed configuration on several nodes. A peer suggested: "Manually change one switch and assume the whole fabric follows" That did not solve the constraint. What should be chosen instead?

  1. Use EDA fabric-intent workflows to reconcile desired fabric configuration.
  2. Use log severity changes as the desired-state data model.
  3. Manually change one switch and assume the whole fabric follows.
  4. Replace all route policies with packet captures.

Explanation

Correct Answer

A:

Intent-based automation represents desired outcomes and coordinates enforcement. The option uses “Use EDA fabric-intent workflows to reconcile desired fabric configuration” to address “the intended fabric topology differs from deployed configuration on several nodes”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

B:

“Use log severity changes as the desired-state data model” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration. Before onboarding, test that the intended fabric state exists.

C:

“Manually change one switch and assume the whole fabric follows” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration. Before onboarding, test that the intended fabric state exists.

D:

“Replace all route policies with packet captures” targets a different operation from the reported requirement: “the intended fabric topology differs from deployed configuration on several nodes”. Intent-based automation represents desired outcomes and coordinates enforcement. Use the appropriate method: Use EDA fabric-intent workflows to reconcile desired fabric configuration. Before onboarding, test that the intended fabric state exists.

Question 410

In the fictional Delta-6 west pod, a controller-managed extension requiring reproducible evidence, the team reports that a two-tier Clos fabric needs resilient leaf-to-spine paths. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use a single large Layer 2 ring as the sole interconnect.
  2. Connect every leaf to each spine in the same fabric.
  3. Connect each leaf only to its nearest leaf.
  4. Place all east-west traffic through one gateway firewall.

Explanation

Correct Answer

B:

Multiple spine paths avoid a single aggregation dependency and permit ECMP. The option uses “Connect every leaf to each spine in the same fabric” to address “a two-tier Clos fabric needs resilient leaf-to-spine paths”. The result must be observed on the affected component.

Incorrect Answers

A:

“Use a single large Layer 2 ring as the sole interconnect” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric.

C:

“Connect each leaf only to its nearest leaf” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric.

D:

“Place all east-west traffic through one gateway firewall” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests