mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 40

Question 390

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that a policy requires a destination prefix to be explicitly discarded. Which engineering action best satisfies this request?

  1. Create an EVPN Type 2 MAC advertisement for all discarded packets.
  2. Use a properly scoped static blackhole disposition for that prefix.
  3. Assign a CLI shortcut that echoes the prefix.
  4. Publish the prefix as a bridged access VLAN.

Explanation

Correct Answer

B:

A blackhole route deliberately discards matching traffic rather than forwarding it. For Atlas-7, confirm the actual outcome: the targeted prefix resolves to discard while unrelated prefixes keep valid paths.

Incorrect Answers

A:

“Create an EVPN Type 2 MAC advertisement for all discarded packets” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Assign a CLI shortcut that echoes the prefix” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Publish the prefix as a bridged access VLAN” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 391

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that two access ports must share tenant Layer 2 reachability without becoming a global bridge. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Use a CPM policer as the VLAN-to-bridge mapping.
  2. Leak all tenant routes into the default network instance.
  3. Attach the ports to the intended MAC-VRF bridge domain.
  4. Use an IP-VRF alone as the Ethernet switching table.

Explanation

Correct Answer

C:

A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. Check: the local tenant MACs learn within only the chosen MAC-VRF.

Incorrect Answers

A:

“Use a CPM policer as the VLAN-to-bridge mapping” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. The confirming result is: the local tenant MACs learn within only the chosen MAC-VRF. For the staged migration, validate the affected path before expansion.

B:

“Leak all tenant routes into the default network instance” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. The confirming result is: the local tenant MACs learn within only the chosen MAC-VRF. For the staged migration, validate the affected path before expansion.

D:

“Use an IP-VRF alone as the Ethernet switching table” targets a different operation from the reported requirement: “two access ports must share tenant Layer 2 reachability without becoming a global bridge”. A MAC-VRF supplies tenant Layer 2 MAC-learning and bridging scope. The confirming result is: the local tenant MACs learn within only the chosen MAC-VRF. For the staged migration, validate the affected path before expansion.

Question 392

In the fictional North-10 west pod, a commissioning exercise under the on-call team, the team reports that remote tenant hosts in one subnet need bridged reachability over VXLAN. The planned change is "Build the MAC-VRF based L2 EVPN-VXLAN service with consistent identifiers." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required layer 2 evpn service condition.
  2. Check only that the device hostname is listed in the inventory, without examining layer 2 evpn service behavior.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Verify that local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage.

Explanation

Correct Answer

D:

L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. The option uses “Verify that local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage” to address “remote tenant hosts in one subnet need bridged reachability over VXLAN”. The acceptance test is: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required layer 2 evpn service condition” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. The confirming result is: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage. Before onboarding, test that the intended fabric state exists.

B:

“Check only that the device hostname is listed in the inventory, without examining layer 2 evpn service behavior” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. The confirming result is: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage. Before onboarding, test that the intended fabric state exists.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “remote tenant hosts in one subnet need bridged reachability over VXLAN”. L2 EVPN couples tenant bridging with distributed MAC reachability and VXLAN transport. The confirming result is: local and remote tenant MAC learning is correct with no unplanned cross-tenant leakage. Before onboarding, test that the intended fabric state exists.

Question 393

In the fictional Atlas-7 east pod, a service recovery task following a partial path outage, the team reports that the same tenant MAC oscillates between attachments and causes instability. The shift handoff must specify a defensible solution and the observable service outcome. Which recommendation is technically justified?

  1. Inspect and apply the MAC move controls and investigate the attachment loop.
  2. Increase BGP timers without examining the shifting MAC.
  3. Change only the management username to stop MAC flaps.
  4. Turn the tenant L3 prefix into a static blackhole.

Explanation

Correct Answer

A:

MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. The option uses “Inspect and apply the MAC move controls and investigate the attachment loop” to address “the same tenant MAC oscillates between attachments and causes instability”. The result must be observed on the affected component. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

B:

“Increase BGP timers without examining the shifting MAC” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Change only the management username to stop MAC flaps” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Turn the tenant L3 prefix into a static blackhole” targets a different operation from the reported requirement: “the same tenant MAC oscillates between attachments and causes instability”. MAC move visibility and controls address repeated endpoint relocation or loops in a bridge instance. Use the appropriate method: Inspect and apply the MAC move controls and investigate the attachment loop. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 394

In the fictional Metro-8 west pod, a multi-tenant fabric undergoing documented validation, the team reports that an expanding data hall requires extra fabric path capacity without redesigning every leaf. Which engineering action best satisfies this request?

  1. Force every leaf to forward through its physical neighbor leaf.
  2. Add compatible spine capacity and attach the fabric leaves to it.
  3. Insert a single Layer 2 hub between all existing spines.
  4. Remove the routed underlay and create one broadcast domain.

Explanation

Correct Answer

B:

Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. For Metro-8, confirm the actual outcome: new spine adjacencies and expected routes become operational on participating leaves.

Incorrect Answers

A:

“Force every leaf to forward through its physical neighbor leaf” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Insert a single Layer 2 hub between all existing spines” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Remove the routed underlay and create one broadcast domain” targets a different operation from the reported requirement: “an expanding data hall requires extra fabric path capacity without redesigning every leaf”. Adding spine capacity is a normal way to increase leaf-spine fabric path diversity. Use the appropriate method: Add compatible spine capacity and attach the fabric leaves to it. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 395

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that a short incident window requires evidence of selected packets without broad logging. The planned change is "Use a scoped SR Linux capture filter and inspect the captured traffic." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Check only that the device hostname is listed in the inventory, without examining capture filters behavior.
  3. Verify that the capture contains relevant matching frames from the requested interface or path.
  4. Use an unrelated tenant dashboard as proof, without verifying the required capture filters condition.

Explanation

Correct Answer

C:

Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The option uses “Verify that the capture contains relevant matching frames from the requested interface or path” to address “a short incident window requires evidence of selected packets without broad logging”. The acceptance test is: the capture contains relevant matching frames from the requested interface or path. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The confirming result is: the capture contains relevant matching frames from the requested interface or path. Before onboarding, test that the intended fabric state exists.

B:

“Check only that the device hostname is listed in the inventory, without examining capture filters behavior” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The confirming result is: the capture contains relevant matching frames from the requested interface or path. Before onboarding, test that the intended fabric state exists.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required capture filters condition” targets a different operation from the reported requirement: “a short incident window requires evidence of selected packets without broad logging”. Capture filters select packet observations for troubleshooting rather than changing policy by themselves. The confirming result is: the capture contains relevant matching frames from the requested interface or path. Before onboarding, test that the intended fabric state exists.

Question 396

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that management access to the switch itself must be restricted. Which engineering action best satisfies this request?

  1. Change a VXLAN VNI as an SSH authentication filter.
  2. Use only a tenant interface ACL and assume it protects all device management.
  3. Disable tenant EVPN routes to secure the management endpoint.
  4. Use the applicable system ACL or management-access policy for device-bound traffic.

Explanation

Correct Answer

D:

System-level access filtering concerns traffic destined to the device, not just transit services. The option uses “Use the applicable system ACL or management-access policy for device-bound traffic” to address “management access to the switch itself must be restricted”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Change a VXLAN VNI as an SSH authentication filter” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

B:

“Use only a tenant interface ACL and assume it protects all device management” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

C:

“Disable tenant EVPN routes to secure the management endpoint” targets a different operation from the reported requirement: “management access to the switch itself must be restricted”. System-level access filtering concerns traffic destined to the device, not just transit services. Use the appropriate method: Use the applicable system ACL or management-access policy for device-bound traffic. Before onboarding, test that the intended fabric state exists.

Question 397

In the fictional Delta-6 east pod, a controller-managed extension requiring reproducible evidence, the team reports that two different EVPN sources can advertise otherwise identical service prefixes. A peer suggested: "Use an interface ACL sequence number as a VPN route key" That did not solve the constraint. What should be chosen instead?

  1. Assign appropriate route distinguishers so VPN routes have distinct identities.
  2. Use a route target as the only globally unique origin identifier.
  3. Remove all identifiers to force unique route origin tracking.
  4. Use an interface ACL sequence number as a VPN route key.

Explanation

Correct Answer

A:

A route distinguisher contributes VPN route uniqueness and is separate from import policy. For Delta-6, confirm the actual outcome: distinct route sources maintain distinguishable VPN route keys.

Incorrect Answers

B:

“Use a route target as the only globally unique origin identifier” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities.

C:

“Remove all identifiers to force unique route origin tracking” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities.

D:

“Use an interface ACL sequence number as a VPN route key” targets a different operation from the reported requirement: “two different EVPN sources can advertise otherwise identical service prefixes”. A route distinguisher contributes VPN route uniqueness and is separate from import policy. Use the appropriate method: Assign appropriate route distinguishers so VPN routes have distinct identities.

Question 398

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that a management client needs a structured request-response configuration interface. Which engineering action best satisfies this request?

  1. Send an Ethernet broadcast as a configuration API request.
  2. Use the supported SR Linux JSON-RPC management interface.
  3. Edit platform binaries directly to change configuration.
  4. Poll an unrelated time server for router configuration state.

Explanation

Correct Answer

B:

JSON-RPC offers a structured management access method instead of screen scraping. For Canyon-5, confirm the actual outcome: a correctly authorized JSON-RPC request returns the expected modeled response.

Incorrect Answers

A:

“Send an Ethernet broadcast as a configuration API request” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface. Before onboarding, test that the intended fabric state exists.

C:

“Edit platform binaries directly to change configuration” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface. Before onboarding, test that the intended fabric state exists.

D:

“Poll an unrelated time server for router configuration state” targets a different operation from the reported requirement: “a management client needs a structured request-response configuration interface”. JSON-RPC offers a structured management access method instead of screen scraping. Use the appropriate method: Use the supported SR Linux JSON-RPC management interface. Before onboarding, test that the intended fabric state exists.

Question 399

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that an EVPN route is visible but is not imported into its intended tenant instance. Which engineering action best satisfies this request?

  1. Use the route distinguisher as a substitute for all import policy.
  2. Raise log severity to turn route import on.
  3. Verify the route-target import and export policy for the target instance.
  4. Change the physical switchport speed to import EVPN VPN routes.

Explanation

Correct Answer

C:

Route targets control import/export membership for VPN routing information. For Ridge-2, confirm the actual outcome: the intended routes are imported only by instances matching the designated targets.

Incorrect Answers

A:

“Use the route distinguisher as a substitute for all import policy” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: Verify the route-target import and export policy for the target instance.

B:

“Raise log severity to turn route import on” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: Verify the route-target import and export policy for the target instance.

D:

“Change the physical switchport speed to import EVPN VPN routes” targets a different operation from the reported requirement: “an EVPN route is visible but is not imported into its intended tenant instance”. Route targets control import/export membership for VPN routing information. The confirming result is: Verify the route-target import and export policy for the target instance.

Question 400

In the fictional Ridge-2 west pod, a secondary data hall with tenant isolation requirements, the team reports that an on-call engineer needs a compact human-readable comparison of many interfaces. Which engineering action best satisfies this request?

  1. Disable interface statistics to shorten every command.
  2. Force binary packet capture as the only display format.
  3. Export full model trees when a focused overview is needed.
  4. Use the CLI table presentation where supported.

Explanation

Correct Answer

D:

Table presentation makes repeated fields easier to compare interactively. For Ridge-2, confirm the actual outcome: the displayed table contains the intended interfaces and columns.

Incorrect Answers

A:

“Disable interface statistics to shorten every command” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

B:

“Force binary packet capture as the only display format” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

C:

“Export full model trees when a focused overview is needed” targets a different operation from the reported requirement: “an on-call engineer needs a compact human-readable comparison of many interfaces”. Table presentation makes repeated fields easier to compare interactively. Use the appropriate method: Use the CLI table presentation where supported.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests