mcAfee Secure Website
exam =5
exam =6

Exam Code: 4A0-D01

Exam Name: Nokia Data Center Fabric Fundamentals

Certification Provider: Nokia

Nokia 4A0-D01 Questions & Answers

Reliable & Actual Study Materials for 4A0-D01 Exam Success

61 Questions & Answers with Testing Engine

"4A0-D01: Nokia Data Center Fabric Fundamentals" Testing Engine covers all the knowledge points of the real Nokia 4A0-D01 exam.

The latest actual 4A0-D01 Questions & Answers from Pass4sure. Everything you need to prepare and get best score at 4A0-D01 exam easily and quickly.

exam =7
Guarantee

Satisfaction Guaranteed

Pass4sure has a remarkable Nokia Candidate Success record. We're confident of our products and provide no hassle product exchange. That's how confident we are!

99.3% Pass Rate
Was: $137.49
Now: $124.99

Nokia 4A0-D01 Practice Test 39

Question 380

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that the fabric must limit large shared Layer 2 failure domains. The planned change is "Use Layer 3 routed links between leaf and spine switches." Which post-change observation best validates the intended technical behavior?

  1. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  2. Check only that the device hostname is listed in the inventory, without examining routed fabric underlay behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required routed fabric underlay condition.
  4. Verify that routed underlay next hops reach all required VTEPs.

Explanation

Correct Answer

D:

A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The option uses “Verify that routed underlay next hops reach all required VTEPs” to address “the fabric must limit large shared Layer 2 failure domains”. The acceptance test is: routed underlay next hops reach all required VTEPs. Confirm that the replacement leaf reaches the expected operational state.

Incorrect Answers

A:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The confirming result is: routed underlay next hops reach all required VTEPs. Confirm that the replacement leaf reaches the expected operational state.

B:

“Check only that the device hostname is listed in the inventory, without examining routed fabric underlay behavior” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The confirming result is: routed underlay next hops reach all required VTEPs. Confirm that the replacement leaf reaches the expected operational state.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required routed fabric underlay condition” targets a different operation from the reported requirement: “the fabric must limit large shared Layer 2 failure domains”. A routed underlay confines broadcast domains and supplies IP reachability for the overlay. The confirming result is: routed underlay next hops reach all required VTEPs. Confirm that the replacement leaf reaches the expected operational state.

Question 381

In the fictional Canyon-5 west pod, a fabric operations audit prior to tenant onboarding, the team reports that a two-tier Clos fabric needs resilient leaf-to-spine paths. An unrelated configuration change is being considered. Which focused remediation best addresses the described problem first?

  1. Connect every leaf to each spine in the same fabric.
  2. Connect each leaf only to its nearest leaf.
  3. Use a single large Layer 2 ring as the sole interconnect.
  4. Place all east-west traffic through one gateway firewall.

Explanation

Correct Answer

A:

Multiple spine paths avoid a single aggregation dependency and permit ECMP. For Canyon-5, confirm the actual outcome: each leaf has live routed adjacencies to the intended spines.

Incorrect Answers

B:

“Connect each leaf only to its nearest leaf” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric. Before onboarding, test that the intended fabric state exists.

C:

“Use a single large Layer 2 ring as the sole interconnect” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric. Before onboarding, test that the intended fabric state exists.

D:

“Place all east-west traffic through one gateway firewall” targets a different operation from the reported requirement: “a two-tier Clos fabric needs resilient leaf-to-spine paths”. Multiple spine paths avoid a single aggregation dependency and permit ECMP. Use the appropriate method: Connect every leaf to each spine in the same fabric. Before onboarding, test that the intended fabric state exists.

Question 382

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that a customer needs an isolated IPv4 route table. Which engineering action best satisfies this request?

  1. Use only a MAC-VRF when separate L3 routes are required.
  2. Use a dedicated IP-VRF network instance for its Layer 3 routes.
  3. Put all customer prefixes into an unsegmented default routing table.
  4. Use a CLI alias as the customer network instance.

Explanation

Correct Answer

B:

An IP-VRF gives the tenant a distinct IP forwarding context. The option uses “Use a dedicated IP-VRF network instance for its Layer 3 routes” to address “a customer needs an isolated IPv4 route table”. The result must be observed on the affected component. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use only a MAC-VRF when separate L3 routes are required” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes. Before onboarding, test that the intended fabric state exists.

C:

“Put all customer prefixes into an unsegmented default routing table” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes. Before onboarding, test that the intended fabric state exists.

D:

“Use a CLI alias as the customer network instance” targets a different operation from the reported requirement: “a customer needs an isolated IPv4 route table”. An IP-VRF gives the tenant a distinct IP forwarding context. Use the appropriate method: Use a dedicated IP-VRF network instance for its Layer 3 routes. Before onboarding, test that the intended fabric state exists.

Question 383

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that a fresh switch boots normally but fails to retrieve its startup configuration. A peer suggested: "Change live EVPN Type 2 entries before validating bootstrap transport" That did not solve the constraint. What should be chosen instead?

  1. Inspect only production tenant MAC-VRF routes.
  2. Change live EVPN Type 2 entries before validating bootstrap transport.
  3. Check bootstrap networking, DHCP-provided information and referenced server availability.
  4. Disable every management interface to force ZTP to work.

Explanation

Correct Answer

C:

Bootstrap failure often comes from missing or unreachable provisioning prerequisites. The option uses “Check bootstrap networking, DHCP-provided information and referenced server availability” to address “a fresh switch boots normally but fails to retrieve its startup configuration”. The acceptance test is: the discovered bootstrap destination is reachable and the retrieval completes. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Inspect only production tenant MAC-VRF routes” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. The confirming result is: the discovered bootstrap destination is reachable and the retrieval completes. For the staged migration, validate the affected path before expansion.

B:

“Change live EVPN Type 2 entries before validating bootstrap transport” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. The confirming result is: the discovered bootstrap destination is reachable and the retrieval completes. For the staged migration, validate the affected path before expansion.

D:

“Disable every management interface to force ZTP to work” targets a different operation from the reported requirement: “a fresh switch boots normally but fails to retrieve its startup configuration”. Bootstrap failure often comes from missing or unreachable provisioning prerequisites. The confirming result is: the discovered bootstrap destination is reachable and the retrieval completes. For the staged migration, validate the affected path before expansion.

Question 384

In the fictional Pine-9 east pod, a replacement leaf with configuration review requirements, the team reports that operators need consistent multi-node fabric changes and state reconciliation. A peer suggested: "Use only a local ping to guarantee all service intent is deployed" That did not solve the constraint. What should be chosen instead?

  1. Use only a local ping to guarantee all service intent is deployed.
  2. Treat routing table snapshots as a complete orchestration system.
  3. Make arbitrary manual changes at each switch with no desired-state record.
  4. Use a supported fabric automation platform for coordinated configuration and visibility.

Explanation

Correct Answer

D:

Coordinated tooling can compare desired fabric intent with deployed network state. For Pine-9, confirm the actual outcome: intended configurations and actual fabric inventory can be reconciled.

Incorrect Answers

A:

“Use only a local ping to guarantee all service intent is deployed” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. Use the appropriate method: Use a supported fabric automation platform for coordinated configuration and visibility. Confirm that the replacement leaf reaches the expected operational state.

B:

“Treat routing table snapshots as a complete orchestration system” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. Use the appropriate method: Use a supported fabric automation platform for coordinated configuration and visibility. Confirm that the replacement leaf reaches the expected operational state.

C:

“Make arbitrary manual changes at each switch with no desired-state record” targets a different operation from the reported requirement: “operators need consistent multi-node fabric changes and state reconciliation”. Coordinated tooling can compare desired fabric intent with deployed network state. Use the appropriate method: Use a supported fabric automation platform for coordinated configuration and visibility. Confirm that the replacement leaf reaches the expected operational state.

Question 385

In the fictional Metro-8 east pod, a multi-tenant fabric undergoing documented validation, the team reports that an architecture review asks how EDA's controller platform is operated. A peer suggested: "Assume the EDA control plane is identical to an Ethernet switch ASIC" That did not solve the constraint. What should be chosen instead?

  1. Describe EDA's Kubernetes-oriented orchestration architecture.
  2. Treat Kubernetes as the data-plane encapsulation for every packet.
  3. Configure BFD as a container orchestration API.
  4. Assume the EDA control plane is identical to an Ethernet switch ASIC.

Explanation

Correct Answer

A:

EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. For Metro-8, confirm the actual outcome: the documented controller workloads and intent resources are observable on the orchestration platform.

Incorrect Answers

B:

“Treat Kubernetes as the data-plane encapsulation for every packet” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. Use the appropriate method: Describe EDA's Kubernetes-oriented orchestration architecture. Observe the relevant forwarding/control-plane behavior under the approved test.

C:

“Configure BFD as a container orchestration API” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. Use the appropriate method: Describe EDA's Kubernetes-oriented orchestration architecture. Observe the relevant forwarding/control-plane behavior under the approved test.

D:

“Assume the EDA control plane is identical to an Ethernet switch ASIC” targets a different operation from the reported requirement: “an architecture review asks how EDA's controller platform is operated”. EDA's platform orchestration concerns managed applications and controller components, not packet tunneling. Use the appropriate method: Describe EDA's Kubernetes-oriented orchestration architecture. Observe the relevant forwarding/control-plane behavior under the approved test.

Question 386

In the fictional Canyon-5 east pod, a fabric operations audit prior to tenant onboarding, the team reports that newly powered switches should receive initial configuration with minimal manual access. The planned change is "Provide the required ZTP discovery and bootstrap information through supported services." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required zero-touch bootstrap condition.
  2. Verify that the device discovers its bootstrap source and applies the intended initial configuration.
  3. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  4. Check only that the device hostname is listed in the inventory, without examining zero-touch bootstrap behavior.

Explanation

Correct Answer

B:

ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The option uses “Verify that the device discovers its bootstrap source and applies the intended initial configuration” to address “newly powered switches should receive initial configuration with minimal manual access”. The acceptance test is: the device discovers its bootstrap source and applies the intended initial configuration. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required zero-touch bootstrap condition” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The confirming result is: the device discovers its bootstrap source and applies the intended initial configuration. Before onboarding, test that the intended fabric state exists.

C:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The confirming result is: the device discovers its bootstrap source and applies the intended initial configuration. Before onboarding, test that the intended fabric state exists.

D:

“Check only that the device hostname is listed in the inventory, without examining zero-touch bootstrap behavior” targets a different operation from the reported requirement: “newly powered switches should receive initial configuration with minimal manual access”. ZTP depends on reachable bootstrap infrastructure and device discovery behavior. The confirming result is: the device discovers its bootstrap source and applies the intended initial configuration. Before onboarding, test that the intended fabric state exists.

Question 387

In the fictional North-10 east pod, a commissioning exercise under the on-call team, the team reports that automation must distinguish configured interface intent from observed link health. The planned change is "Read the appropriate modeled configuration and state objects separately." Which post-change observation best validates the intended technical behavior?

  1. Use an unrelated tenant dashboard as proof, without verifying the required configuration and state models condition.
  2. Check only that the device hostname is listed in the inventory, without examining configuration and state models behavior.
  3. Verify that the model shows both intended admin setting and actual operational status.
  4. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.

Explanation

Correct Answer

C:

A configured value and an operationally measured value answer different questions. The option uses “Verify that the model shows both intended admin setting and actual operational status” to address “automation must distinguish configured interface intent from observed link health”. The acceptance test is: the model shows both intended admin setting and actual operational status. Before onboarding, test that the intended fabric state exists.

Incorrect Answers

A:

“Use an unrelated tenant dashboard as proof, without verifying the required configuration and state models condition” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. The confirming result is: the model shows both intended admin setting and actual operational status. Before onboarding, test that the intended fabric state exists.

B:

“Check only that the device hostname is listed in the inventory, without examining configuration and state models behavior” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. The confirming result is: the model shows both intended admin setting and actual operational status. Before onboarding, test that the intended fabric state exists.

D:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “automation must distinguish configured interface intent from observed link health”. A configured value and an operationally measured value answer different questions. The confirming result is: the model shows both intended admin setting and actual operational status. Before onboarding, test that the intended fabric state exists.

Question 388

In the fictional Orchard-3 west pod, a lab-to-production migration after a successful canary, the team reports that operations need machine-readable configuration and operational state. The planned change is "Use SR Linux model-driven YANG configuration and state models." Which post-change observation best validates the intended technical behavior?

  1. Check only that the device hostname is listed in the inventory, without examining sr linux models behavior.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Use an unrelated tenant dashboard as proof, without verifying the required sr linux models condition.
  4. Verify that retrieved modeled configuration and state reflect the target object accurately.

Explanation

Correct Answer

D:

YANG describes a structured data model that management clients can interpret. The option uses “Verify that retrieved modeled configuration and state reflect the target object accurately” to address “operations need machine-readable configuration and operational state”. The acceptance test is: retrieved modeled configuration and state reflect the target object accurately. For the staged migration, validate the affected path before expansion.

Incorrect Answers

A:

“Check only that the device hostname is listed in the inventory, without examining sr linux models behavior” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. The confirming result is: retrieved modeled configuration and state reflect the target object accurately. For the staged migration, validate the affected path before expansion.

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. The confirming result is: retrieved modeled configuration and state reflect the target object accurately. For the staged migration, validate the affected path before expansion.

C:

“Use an unrelated tenant dashboard as proof, without verifying the required sr linux models condition” targets a different operation from the reported requirement: “operations need machine-readable configuration and operational state”. YANG describes a structured data model that management clients can interpret. The confirming result is: retrieved modeled configuration and state reflect the target object accurately. For the staged migration, validate the affected path before expansion.

Question 389

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that a high-volume overlay segment has excessive ARP or ND flooding. The planned change is "Evaluate supported EVPN endpoint information and proxy or suppression features." Which post-change observation best validates the intended technical behavior?

  1. Verify that known remote endpoint resolution succeeds with reduced unnecessary flood traffic.
  2. Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior.
  3. Check only that the device hostname is listed in the inventory, without examining neighbor discovery optimization behavior.
  4. Use an unrelated tenant dashboard as proof, without verifying the required neighbor discovery optimization condition.

Explanation

Correct Answer

A:

Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. The option uses “Verify that known remote endpoint resolution succeeds with reduced unnecessary flood traffic” to address “a high-volume overlay segment has excessive ARP or ND flooding”. The acceptance test is: known remote endpoint resolution succeeds with reduced unnecessary flood traffic. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Incorrect Answers

B:

“Confirm that a documentation ticket is marked complete, without checking switch state or forwarding behavior” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. The confirming result is: known remote endpoint resolution succeeds with reduced unnecessary flood traffic. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Check only that the device hostname is listed in the inventory, without examining neighbor discovery optimization behavior” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. The confirming result is: known remote endpoint resolution succeeds with reduced unnecessary flood traffic. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Use an unrelated tenant dashboard as proof, without verifying the required neighbor discovery optimization condition” targets a different operation from the reported requirement: “a high-volume overlay segment has excessive ARP or ND flooding”. Distributed endpoint information may reduce unnecessary ARP/ND flooding when supported and configured. The confirming result is: known remote endpoint resolution succeeds with reduced unnecessary flood traffic. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Question 390

In the fictional Atlas-7 west pod, a service recovery task following a partial path outage, the team reports that a policy requires a destination prefix to be explicitly discarded. Which engineering action best satisfies this request?

  1. Create an EVPN Type 2 MAC advertisement for all discarded packets.
  2. Use a properly scoped static blackhole disposition for that prefix.
  3. Assign a CLI shortcut that echoes the prefix.
  4. Publish the prefix as a bridged access VLAN.

Explanation

Correct Answer

B:

A blackhole route deliberately discards matching traffic rather than forwarding it. For Atlas-7, confirm the actual outcome: the targeted prefix resolves to discard while unrelated prefixes keep valid paths.

Incorrect Answers

A:

“Create an EVPN Type 2 MAC advertisement for all discarded packets” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

C:

“Assign a CLI shortcut that echoes the prefix” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

D:

“Publish the prefix as a bridged access VLAN” targets a different operation from the reported requirement: “a policy requires a destination prefix to be explicitly discarded”. A blackhole route deliberately discards matching traffic rather than forwarding it. Use the appropriate method: Use a properly scoped static blackhole disposition for that prefix. Recovery acceptance must verify service state after the fault, not merely a configuration entry.

Nokia Data Center Fabric Fundamentals (4A0-D01) Practice Tests